Rubber tree early selection for yield stability in time and among locations

Rubber production in the rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Muell. Arg.] can be expressed differently in different environments. Thus the objective of the present study was to select productive progenies, stable and responsive in time and among locations. Thirty progenies were assessed by early yield tests at three ages and in three locations. A randomized block design was used with three replications and ten plants per plot, in 3 × 3 m spacing. The procedure of the mixed linear Reml/Blup model-restricted maximum likelihood/best non-biased linear prediction was used in the genetic statistical analyses. In all the individual analyses, the values observed for the progeny average heritability (ĥpa 2) were greater than those of the additive effect based on single individuals (ĥa 2) and within plot additive (ĥad 2). In the joint analyses in time, there was genotype × test interaction in the three locations. When 20 % of the best progenies were selected the predicted genetic gains were: Colina GG = 24.63 %, Selvíria GG = 13.63 %, and Votuporanga GG = 25.39 %. Two progenies were among the best in the analyses in the time and between locations. In the joint analysis among locations there was only genotype × location interaction in the first early test. In this test, selecting 20 %, the general predicted genetic gain was GG = 25.10 %. Identifying progenies with high and stable yield over time and among locations contributes to the efficiency of the genetic breeding program. The relative performance of the progenies varies depending of the age of early selection test. © 2013 Springer Science+Business Media Dordrecht.

Floral induction of mango 'Tommy Atkins' at submedio São Francisco Region, Brazil

Irregular production is a major problem in mango. In an attempt to overcome irregular bearing, effects of two antigibberellins on flowering were evaluated, uniconazole (0.25 g of active ingredient per meter of canopy tree diameter) and paclobutrazol (1.0 g of active ingredient per meter of canopy tree diameter). Treatments were applied as a soil drench using 2 L of solution per tree, in a commercial orchard of 'Tommy Atkins' mango. Treatments were applied after the second vegetative flush commenced, subsequent to pruning. Branch growth was evaluated every 30 days after treatment application up to a maximum period of 90 days. The flowering percentage was recorded at 130 days. Ammonium nitrate (NH4NO3) as a foliar spray (concentration of 0.75%) was applied five times at seven day intervals from 95 to 100 days after treatment application as a dormancy breaking treatment. It was found that both paclobutrazol (PBZ) and uniconazole (UCZ) significantly inhibited the development of vegetative growth compared to the control. Both treatments resulted in identical rates of flowering shoots, 87%; based on results, it can be concluded that the application of antigibberellins (PBZ and UCZ) inhibit vegetative development in mango 'Tommy Atkins', and promote high levels of flowering. Additional tests are being carried out in other farms to confirm these findings, for different cultivars and seasons. © ISHS 2013.

User-producer interaction in the Brazilian oil industry: The relationship between petrobras and its suppliers of wet Christmas tree

The objective of this work is to analyze the importance of the user-producer interaction for the innovative process of the Brazilian oil industry from the 2000s. To do so, we selected two of the three providers installed in Brazil that produce the set of valves used in the oil wellhead to control its production, set which is called wet Christmas tree (WCT), the Norway's Aker Solutions and the American FMC Technologies. The results of this analysis indicate not only the development of the oil industry in Brazil is marked by a strategy of cooperative innovation, but they also reveal the importance of geographical proximity and direct cooperation, especially between the centers of engineering and research and development of companies. Furthermore, these partnerships are not limited to the adaptation of products to new needs, but they also include the development of new systems. © Universidad Alberto Hurtado, Facultad de Economía y Negocios.

Leaf anatomical traits are correlated with tree dominance in a Neotropical deciduous forest

Deciduous forests from the neotropics are one of the most endangered forest types in the world due to the exploitation of their natural resources by mankind. Many aspects of these ecosystems have been studied; however, there is a lack of information about leaf structure and the effects of tree dominance on their structural leaf patterns. In this article, we examine leaf anatomy and specific leaf areas (SLA) in 13 tree species differing in their dominance in a Dry Forest site in Central Brazil, relating leaf anatomical traits with phytosociological aspects. Leaf anatomical traits differed according to tree dominance: greater leaf thickness (achieved through greater thickness of the mesophyll), low values of SLA and bigger stomata were found for the most dominant species, whereas the less dominant species showed thinner leaves with high SLA, as well as numerous and small stomata. These responses suggest that tree dominance is an important indirect effect associated with vertical light availability in the forest. These strategies are probably related to the accomplishment of a high performance in carbon gain and water economy, given the distinction in irradiance that the leaves of different species are subject to in the dry forest. © 2013 Copyright The Royal Society of New Zealand.

Prospects for the use of municipal tree pruning wastes in particleboard production

The purpose of this study was to evaluate the physical and mechanical properties of particleboard made with pruning wastes from Ipê (Tabebuia serratifolia) and Chapéu-de-Sol (Terminalia catappa) trees. Particleboards were prepared with both wood species, using all the material produced by grinding the pruning wastes. The particleboards had dimensions of 45×45 cm, a thickness of approximately 11.5 mm and an average density of 664 kg/m3. A urea-formaldehyde adhesive was used in the proportion of 12% of the dry particle mass. The particleboards were pressed at a temperature of 130 C for 10 mins. The physical and mechanical properties analyzed were density, moisture content, thickness swelling, percentage of lignin and cellulose, modulus of resilience, modulus of elasticity and tensile strength parallel to the grain, accordingly to the standards NBR 14810 and CS 236-66 (1968). The particleboards were considered to be of medium density. The particle size significantly affected the static bending strength and tensile strength parallel to the grain. Ipê presented better results, demonstrating a potential for the production and use of particleboard made from this species. © The Author(s) 2013.

MHV tree amplitudes in super-Yang-Mills and in superstring theory

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Equações volumétricas e produção de madeira em plantios mistos visando à restauração da floresta estacional semidecidual

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Controle biológico de Brachiaria decumbens Stapf em área de reserva legal em processo de recuperação, na região do Pontal do Paranapanema, São Paulo, Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A simpler prescription to calculate MHV amplitudes for gravitons at tree level in superstring theory

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Impact of the timing and duration of weed control on the establishment of a rubber tree plantation

A produção da seringueira é reduzida pelas plantas daninhas que competem por recursos ambientais; portanto, a época e duração do controle de plantas daninhas influencia a interferência das plantas daninhas. Os objetivos deste estudo foram: avaliar o crescimento de plantas de seringueira (Hevea brasiliensis), determinar o período crítico para controle das plantas daninhas e avaliar a recuperação do crescimento das seringueiras que conviveram com plantas daninhas por diferentes períodos de tempo após o plantio. Dois grupos de tratamentos foram estabelecidos em condições de campo, no primeiro ano de investigação: um grupo conteve períodos crescentes de infestação de plantas daninhas, enquanto o outro conteve períodos crescentes de controle das plantas daninhas, também incluindo uma testemunha livre de plantas daninhas e uma testemunha com infestação total de plantas daninhas. No segundo ano da investigação, as plantas daninhas foram totalmente controladas. Urochloa decumbens foi a planta daninha dominante (mais de 90% de cobertura). O crescimento da cultura foi grandemente reduzido devido à interferência de plantas daninhas. A altura de plantas decresceu mais rapidamente que qualquer outra característica. Altura de planta, massa seca de folhas e área foliar decresceram em 99%, 97% e 96%, respectivamente, e foram as características mais reduzidas. A altura de plantas também se recuperou mais rapidamente que qualquer outra característica quando o período de controle das plantas daninhas foi entendido. Contudo, a massa seca do caule aumentou em 750%, fazendo desta a característica mais recuperada. O período crítico para o controle de plantas daninhas foi entre 4 e 9½ meses após o plantio, no primeiro ano; contudo, as seringueiras mostraram expressiva recuperação do crescimento quando as plantas daninhas foram controladas ao longo do segundo ano.

Leaf Morphological Plasticity of Tree Species from Two Developmental Stages in Araucaria Forest

This study compared the morphological and anatomical variations of the leaves of four shade-tolerant tree species Allophylus edulis (St.-Hil.) Radlk (Sapindaceae), Casearia sylvestris Sw. (Salicaceae), Cupania vernalis Cambess. (Sapindaceae) and Luehea divaricata Mart. (Malvaceae) from a fragment of Araucaria forest in two developmental stages. Morphological and anatomical traits, such as leaf and tissue thickness, leaf area, leaf dry mass, specific leaf area, leaf density and stomata density were measured from 30 leaves of each developmental stage. The phenotypic plasticity index was also calculated for each quantitative trait. The results showed that the four species presented higher mean values ​​for specific leaf area and spongy/palisade parenchyma ratio at young stage, and higher mean values ​​for stomata density, total and palisade parenchyma thickness in the adult stage. The plasticity index demonstrated that L. divricata presented highest plasticity for both the morphological and anatomical traits while A. edulis displayed the lowest plasticity index. The results of this study indicated that the leaves of these species exhibited distinct morphological traits at each stage of development to cope with acting environmental factors.

A novel association between Rhodnius neglectus and the Livistona australis palm tree in an urban center foreshadowing the risk of Chagas disease transmission by vectorial invasions in Monte Alto City, Sao Paulo, Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Light and temperature induce variations in the density and ultrastructure of the secretory spaces in the diesel-tree (Copaifera langsdorffii Desf.-Leguminosae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito do nível e da época de desfolha artificial sobre os componentes de produtividade de cultivares de algodoeiro

The periodic substitution of cotton cultivars for the farms can modify the levels of economic damages and control of pests, compromising the success in pest control. The objective of this work was to evaluate the effect of simulated defoliation levels in cotton cultivars actually used. The assay was carried out in experimental area of the Polo Apta Centro Norte, in Pindorama, Sao Paulo state. There were evaluated four defoliations levels (0%, 36.8%, 62.1% e 100%), done at a unique operation, in tree times (30, 60 and 90 days after plant emergence) and four cotton cultivars (IAC-25, DeltaOpal, Fibermax 966 and Fibermax 993). The defoliation was done with a scissor simulating the caterpillar damage. Evaluations included the number of open bolls, weight of one boll and 100 seeds, fiber percentage and productivity (kg ha(-1)). The defoliation negatively affected all components of agronomic traits, with the exception of percentage of fiber. The most damaging levels were 62.1 and 100% removal of the leaf blade. The period of higher susceptibility to defoliation occurs from 30 to 60 days after plant emergence.