CARBOXYLATION OF SILVER NANOPARTICLES FOR THE IMMOBILIZATION OF β-GALACTOSIDASE AND ITS EFFICACY IN GALACTO-OLIGOSACCHARIDES PRODUCTION

The present study investigated the carboxylation of silver nanoparticles (AgNPs) by 1:3 nitric acid-sulfuric acid mixtures for immobilizing Aspergillus oryzae β-galactosidase. Carboxylated AgNPs retained 93% enzyme upon immobilization and the enzyme did not leach out appreciably from the modified nanosupport in the presence of 100 mmol L-1 NaCl. Atomic force micrograph revealed the binding of β-galactosidase on the modified AgNPs. The optimal pH for soluble and carboxylated AgNPs adsorbed β-galactosidase (IβG) was observed at pH 4.5 while the optimal operating temperature was broadened from 50 ºC to 60 ºC for IβG. Michaelis constant, Km was increased two and a half fold for IβG while Vmax decreases slightly as compared to soluble enzyme. β-galactosidase immobilized on surface functionalized AgNPs retained 70% biocatalytic activity even at 4% galactose concentration as compared to enzyme in solution. Our study showed that IβG produces greater amount of galacto-oligosaccharides at higher temperatures (50 ºC and 60 ºC) from 0.1 mol L-1 lactose solution at pH 4.5 as compared to previous reports.

COMPOSIÇÃO QUÍMICA DAS CASCAS DAS RAÍZES E FLORES DEPoincianella pyramidalis (Fabaceae)

Chemical investigation of the MeOH extract of root barks of P. pyramidallis (Tul.) L. P. Queiroz resulted in the isolation of 3,3'-dimethylellagic acid and 3,3'-dimethylellagic acid-4'-O-β-D-xyloside. Lupeol, β-sitosterol/stigmasterol and the mixture of fatty acid methyl ester derivatives were also obtained. Chromatographic procedures of the MeOH extract of the flowers of this species led to obtain an unusual mixture of fatty alcohols, β-sitosterol/stigmasterol, α-amyrin, β-amyrin and methyl gallate. The structures of the isolates were established by spectral data analysis. This is the first occurrence of 3,3'-dimethylellagic acid, 3,3'-dimethylellagic acid-4'- O-β-D-xyloside and free fatty alcohols in the Fabaceae family.

Methylene blue adsorption onto modified lignin from sugar cane bagasse

The adsorption kinetics and equilibrium of methylene blue (MB) onto reticulated formic lignin (RFL) from sugar cane bagasse was studied. The adsorption process is pH, temperature and ionic strength (µ) dependent and obeys the Langmuir model. Conditions for higher adsorption rate and capacity were determined. The faster adsorption (12 hours) and higher adsorption capacity (34.20 mg.g-1) were observed at pH = 5.8 (acetic acid-sodium acetate aqueous buffer), 50 ºC and 0.1 ionic strength. Under temperature (50 ºC) control and occasional mechanical stirring it took from 1 to 10 days to reach the equilibrium.

Titrimetric assay of lisinopril in aqueous and non-aqueous media

Four simple titrimetric procedures are described for the determination of lisinopril (LNP) in bulk and in pharmaceuticals based on the neutralization of basic-amino and acidic carboxylic acid groups present in LNP. Method A is based on the neutralization of basic amino groups using perchloric acid as titrant in anhydrous acetic acid medium. Method B, method C and method D are based on neutralization of carboxylic acid group using NaOH, sodium methoxide and methanolic KOH, as titrants, respectively. Method A is applicable over 2.0-20.0 mg range and the calculations are based in the molar ratio of 1:2 (LNP:HClO4). Method B, method C and method D are applicable over 2.0-20.0 mg, 1.0-10.0 mg and 5.0-15.0 mg range, respectively, and their respective molar ratios are 1:1 (LNP:NaOH), 1:2 (LNP:CH3ONa) and 1:1 (LNP:KOH). Intraday and inter day accuracy and precision of the methods were evaluated and the results showed intra- and inter-day precision less than 2.7% (RSD), and accuracy of < 2.5 % (RE). The developed methods were applied to determine LNP in tablets and the results were validated statistically by comparing the results with those of the reference method by applying the Student's t-test and F-test. The accuracy was further ascertained by recovery studies via standard addition technique. No interferences from common tablet exipients was observed.

Lämpötilan vaikutus kalvojen likaantumiseen erityisesti adsorptiolla

Työssä tutkittiin lämpötilan vaikutusta kalvon likaantumiseen mustalipeällä ja puuperäisellä hydrolysaatilla lämpötiloissa 20, 45 ja 70 °C:tta. Työn tavoitteena oli löytää lämpötila, jossa tutkimuksessa käytetyt puuperäiset liuokset likasivat kalvoja mahdollisimman vähän. Tutkimuksessa käytettiin Alfa Lavalin UFX5-ultrasuodatuskalvoa sekä Microdyn-Nadirin ultrasuodatuskalvoa UP010 ja nanosuodatuskalvoa NP010. Ennen puuperäisten liuosten adsorboimista kalvoihin säilöntäaineet poistettiin kalvoista sekä kalvojen toiminta stabiloitiin esikäsittelemällä kalvot. Esikäsittelyssä kalvoja pestiin alkalisella pesuaineella, puristettiin 8 bar:n paineessa sekä huuhdeltiin vedellä ja etikkahapolla. Esikäsitellyt kalvot karakterisoitiin mittaamalla malliaineliuoksen vuo ja malliaineiden retentiot suodattamalla polyetyleeniglykoliliuosta kolmikennosuodattimella paineissa 2, 4 ja 6 bar. Tämän jälkeen kalvot altistettiin lämpötiloissa 20, 45 ja 70 °C:tta mustalipeälle ja hydrolysaatille. Altistuksen jälkeen karakterisointi tehtiin uudelleen, jotta vuoarvoja ja retentioita vertaamalla voitiin arvioida altistuksen aikana tapahtunutta kalvojen likaantumista. Adsorboituneen lian puhdistusta kalvoista tutkittiin pesemällä kalvoja alkalisella pesuliuoksella 20 °C:ssa tehdyn altistuksen jälkeen. Mustalipeälle altistettujen kalvojen likaantuminen oli vähäisintä kokeissa, joissa lämpötila oli 20 °C. Alfa Lavalin UFX5-kalvolla 70 °C:ssa tehdyssä kokeessa kalvon likaantuminen oli myös erittäin vähäistä, sillä permeabiliteetti pieneni mustalipeäaltistuksen seurauksena alle 5 %. Hydrolysaatille altistetut kalvot likaantuivat adsorptiolla vähiten Alfa Laval UFX5-kalvoilla 20 °C:ssa tehdyissä kokeissa ja 45 °C:ssa Microdyn-Nadir NP010-kalvoilla tehdyissä kokeissa. Kokeiden perusteella tutkituista vaihtoehdoista korkein tutkimuksessa käytetty lämpötila 70 °C ja Alfa Lavalin UFX5-kalvo soveltuvatkin parhaiten mustalipeän kalvosuodatukseen adsorptiivisen likaantumisen kannalta.

In vitro multiplication of Tabernaemontana fuchsiaefolia L. (Apocynaceae)

This study describes a simple and promising for in vitro multiplication of Tabernaemontana fuchsiaefolia, a species abundantly found in southern Brazil utilized for medicinal purposes and as a source of compounds that may be used to develop new synthetic drugs. Apical and hypocotyl explants were cultured in MS medium containing different concentrations of the cytokinins benzylaminopurine (BA) and 6-furfurylaminopurine (kinetin), supplemented with phloroglucinol (1, 3, 5-hydroxybenzene) to stimulate growth and shoot proliferation. Cytokinin added to the culture media positively influenced the micropropagation of T. fuchsiaefolia.and kinetin induced more shoots per explant than BA cytokinin. A favorable effect of phloroglucinol on apical and lateral buds from hypocotyls was also achieved in medium containing no kinetin or in all kinetin concentrations tested. Short pulses of auxin 3-indolebutyric acid (IBA) 5.0 mg/l resulted in satisfactory rooting in apical microcuttings. The addition of phloroglucinol to MS medium induced rhizogenesis in 29% of the nodal segments transferred to MS medium in the absence of IBA and in 50% of the nodal segments transferred to MS medium containing 0.5 mg/l IBA and in nodal segments previously submitted to short pulses of IBA.

VEGETATIVE RESCUE AND CUTTINGS PROPAGATION OF Araucaria angustifolia (Bertol.) Kuntze

Brazilian pine or araucaria (Araucaria angustifolia) is a coniferous tree with great economic, social and environmental importance in southern Brazil, being exploited for both wood production and for its edible pine nuts. However, no efficient cloning techniques are available and, therefore, the purpose of this study was to evaluate the effectiveness of vegetative rescue methods for cuttings propagation of the species. Shoots/cuttings were generated in two ways: 26 years old trees underwent coppicing and 20 years old trees had the primary branches on the upper third of crown pruned at 2, 20 and 50 cm from the main trunk. Orthotropic shoots were rooted after application of indole-3-butyric acid (IBA) at 0, 2, 4 and 6 g.L-1. Coppicing produced 47 cuttings per plant with 90% orthotropic shoots, while pruning resulted in 182 cuttings per plant with 44% orthotropic shoots. Rooting success indexes were low with no influence of IBA, although they are slightly superior to the ones available in the literature for the species, ranging from 12 to 30% for the coppice shoots and from 0 to 28% for the branches shoots. We conclude that both vegetative rescue techniques are viable and have potentially important applications. Coppicing is recommended for the propagation aiming the production of wood, while shoots derived from the side branches of the crown are more appropriate for seeds orchards formation.

Effects of infection with Toxoplasma gondii oocysts on the intestinal wall and the myenteric plexus of chicken (Gallus gallus)

This paper aims to analyze the effects of the Toxoplasma gondii infection in the intestinal wall and myenteric plexus of chicken (Gallus gallus). Ten 36-day-old chickens were separated into two groups: control and experimental, orally inoculated with oocysts of the T. gondii strain M7741 genotype III. After 60 days the birds were submitted to euthanasia and had their duodenum removed. Part of the intestinal segments was submitted to histological routine, HE staining, PAS histochemical technique, and Alcian Blue. Qualitative analysis of the intestinal wall and comparative measurements among the groups with respect to total wall thickness, muscle tunic, mucosa, and tunica mucosa were carried out. Caliciform cells were quantified. The other part of the intestinal segments was fixed in formol acetic acid and dissected having the tunica mucosa and the tela submucosa removed. Neurons were stained with Giemsa, counted, and measured. Chickens from the experimental group presented diarrhea and inflammatory infiltrates in the tunica mucosa, thickness reduction of all the parameters assessed in the intestinal wall, and an increase of the number of caliciform cells. There was a ~70% reduction regarding the intensity of myenteric neurons; and the remaining cells presented a reduction of ~2.4% of the perikarion and ~40.5% of the nucleus (p<0.05). Chronic infection induced by T. gondii oocysts resulted in intestinal wall atrophy, mucin secretion increase, death and atrophy of chicken myenteric plexus neurons. Death and atrophy of myenteric plexus neurons may be related with the causes of diarrhea observed in chickens with toxoplasmosis.

Effect of Lactobacillus sp. isolates supernatant on Escherichia coli O157:H7 enhances the role of organic acids production as a factor for pathogen control

Many attempts have been made to establish the control of foodborne pathogens through Lactobacillus isolates and their metabolism products with success being obtained in several situations. The aim of this study was to investigate the antagonistic effect of eight Lactobacillusisolates, including L. caseisubsp. pseudoplantarum,L. plantarum, L. reuteri and L. delbrueckii subsp. delbrueckii, on the pathogenic Escherichia colistrain O157:H7. The inhibitory effect of pure cultures and two pooled cultures supernatants of Lactobacillus on the growth of pathogenic bacteria was evaluated by the spot agar method and by monitoring turbidity. Antimicrobial activity was confirmed for L. reuteri and L. delbrueckii subsp. delbrueckii and for a pool of lactic acid bacteria. The neutralized supernatant of the pool exerted a higher antimicrobial activity than that of the individual strains. Furthermore, D-lactic acid and acetic acid were produced during growth of the Lactobacillus isolates studied.

Biomassahydrolysaattien puhdistus uutolla

Lignoselluloosasta koostuvasta biomassasta valmistetaan hydrolysoimalla sokereita, jotka jatkojalostetaan fermentoimalla bioetanoliksi. Bioetanolia käytetään fossiilisten polttoaineiden korvaajana esimerkiksi ajoneuvoissa. Bioetanolin valmistuksessa pyritään mahdollisimman hyvään saantoon, jotta sen valmistus olisi taloudellisesti kannattavaa. Hydrolyysin aikana syntyy sokerien lisäksi orgaanisia happoja, furaanin johdannaisia sekä fenolisia yhdisteitä. Yleisimpiä syntyviä yhdisteitä ovat muun muassa etikkahappo, furfuraali ja hydroksimetyylifurfuraali. Nämä yhdisteet haittaavat sokerien fermentointiprosessia ja pienentävät etanolin saantoa. Fermentointiprosessia haittaavien yhdisteiden poistoon hydrolysaattiliuoksesta voidaan käyttää esimerkiksi haihdutusta, membraanierotusta, adsorptiota, saostusta, sekä uuttoa. Tämän työn tarkoituksena oli tutkia leikkaussekoittimen soveltuvuutta biomassahydrolysaatin epäpuhtauksien erotukseen. Lisäksi kirjallisuusosassa on esitetty hydrolysointiprosessissa syntyviä haitta-aineita ja niiden erotusmenetelmiä.

Chromatographic recovery of chemicals from acidic biomass hydrolysates

Lignocellulosic biomasses (e.g., wood and straws) are a potential renewable source for the production of a wide variety of chemicals that could be used to replace those currently produced by petrochemical industry. This would lead to lower greenhouse gas emissions and waste amounts, and to economical savings. There are many possible pathways available for the manufacturing of chemicals from lignocellulosic biomasses. One option is to hydrolyze the cellulose and hemicelluloses of these biomasses into monosaccharides using concentrated sulfuric acid as catalyst. This process is an efficient method for producing monosaccharides which are valuable platforn chemicals. Also other valuable products are formed in the hydrolysis. Unfortunately, the concentrated acid hydrolysis has been deemed unfeasible mainly due to high chemical consumption resulting from the need to remove sulfuric acid from the obtained hydrolysates prior to the downstream processing of the monosaccharides. Traditionally, this has been done by neutralization with lime. This, however, results in high chemical consumption. In addition, the by-products formed in the hydrolysis are not removed and may, thus, hinder the monosaccharide processing. In order to improve the feasibility of the concentrated acid hydrolysis, the chemical consumption should be decreased by recycling of sulfuric acid without neutralization. Furthermore, the monosaccharides and the other products formed in the hydrolysis should be recovered selectively for efficient downstream processing. The selective recovery of the hydrolysis by-products would have additional economical benefits on the process due to their high value. In this work, the use of chromatographic fractionation for the recycling of sulfuric acid and the selective recovery of the main components from the hydrolysates formed in the concentrated acid hydrolysis was investigated. Chromatographic fractionation based on the electrolyte exclusion with gel type strong acid cation exchange resins in acid (H+) form as a stationary phase was studied. A systematic experimental and model-based study regarding the separation task at hand was conducted. The phenomena affecting the separation were determined and their effects elucidated. Mathematical models that take accurately into account these phenomena were derived and used in the simulation of the fractionation process. The main components of the concentrated acid hydrolysates (sulfuric acid, monosaccharides, and acetic acid) were included into this model. Performance of the fractionation process was investigated experimentally and by simulations. Use of different process options was also studied. Sulfuric acid was found to have a significant co-operative effect on the sorption of the other components. This brings about interesting and beneficial effects in the column operations. It is especially beneficial for the separation of sulfuric acid and the monosaccharides. Two different approaches for the modelling of the sorption equilibria were investigated in this work: a simple empirical approach and a thermodynamically consistent approach (the Adsorbed Solution theory). Accurate modelling of the phenomena observed in this work was found to be possible using the simple empirical models. The use of the Adsorbed Solution theory is complicated by the nature of the theory and the complexity of the studied system. In addition to the sorption models, a dynamic column model that takes into account the volume changes of the gel type resins as changing resin bed porosity was also derived. Using the chromatography, all the main components of the hydrolysates can be recovered selectively, and the sulfuric acid consumption of the hydrolysis process can be lowered considerably. Investigation of the performance of the chromatographic fractionation showed that the highest separation efficiency in this separation task is obtained with a gel type resin with a high crosslinking degree (8 wt. %); especially when the hydrolysates contain high amounts of acetic acid. In addition, the concentrated acid hydrolysis should be done with as low sulfuric acid concentration as possible to obtain good separation performance. The column loading and flow rate also have large effects on the performance. In this work, it was demonstrated that when recycling of the fractions obtained in the chromatographic fractionation are recycled to preceding unit operations these unit operations should included in the performance evaluation of the fractionation. When this was done, the separation performance and the feasibility of the concentrated acid hydrolysis process were found to improve considerably. Use of multi-column chromatographic fractionation processes, the Japan Organo process and the Multi-Column Recycling Chromatography process, was also investigated. In the studied case, neither of these processes could compete with the single-column batch process in the productivity. However, due to internal recycling steps, the Multi-Column Recycling Chromatography was found to be superior to the batch process when the product yield and the eluent consumption were taken into account.

Wet oxidation of biomass for chemical production

Tämän kandidaatintyön tarkoituksena oli tutkia märkähapetusprosessia jätevesien käsittely-menetelmänä ja mahdollisena menetelmänä kemikaalien tuottamiseksi jätevesistä. Erityishuomio on kiinnitetty paperiteollisuudessa syntyviin jätevesiin. Teoriaosassa käsitellään vesikiertoja paperitehtaassa, paperitehtaalla syntyvän jäteveden ominaisuuksia sekä itse märkähapetusprosessia. Märkähapetusprosessissa perehdytään tavalliseen happea käyttävään märkähapetukseen sekä vetyperoksidia käyttävään menetelmään sekä näissä prosesseissa syntyviin väli- ja lopputuotteisiin. Märkähapetus (WO) on terminen hapetusmenetelmä, jolla voidaan käsitellä jätevesiä, jotka ovat liian konsentroituja biologisiin käsittelyihin tai jotka ovat huonosti biohajoavia. Märkähapetuksen tarkoituksena on parantaa molekulaarisen hapen ja orgaanisen aineen välistä kontaktia, jolloin orgaaninen aines pilkkoutuu muodostaen pääasiassa karboksyylihappoja, aldehydejä, hiilidioksidia ja vettä. Märkähapetuksessa hapettavana kaasuna voidaan käyttää joko puhdasta happea tai ilmaa. Vetyperoksidia käyttävässä märkähapetuksessa (WPO) hapettava kaasu on korvattu nestemäisellä vetyperoksidilla. Kokeellisessa osassa tutkittiin orgaanisen aineksen hapetusta käyttäen Fentonin reagenssia, jolloin katalyyttina reaktiossa toimii rautaionit (Fe2+ ja Fe3+) ja hapettimena vetyperoksidi. Hapetettavana jätevetenä käytettiin paperitehtaan hiomolta saatua kiertovettä, TMP-vettä. Hapetuskokeita tehtiin eri vetyperoksidin annoksilla ja katalyytin määrillä eri lämpötiloissa. Hapetuksen jälkeen näytteistä mitattiin kemiallinen hapenkulutus (COD), orgaanisen hiilen kokonaismäärä (TOC) sekä pH. Lisäksi näytteistä määritettiin nestekromatografilla (HPLC) tyypillisten välituotteiden, kuten oksaalihapon, muurahaishapon ja etikkahapon, määrät. Tehdyissä kokeissa COD-arvoja saatiin pienennettyä 50-88 % siten, että suodatetuissa näytteissä muutos oli suurempi kuin suodattamattomissa näytteissä. Lisäksi TOC-arvot laskivat 28-58 %. Tehdyissä kokeissa saatiin myös tuotettua välituotteina karboksyylihappoja, joista etikkahappoa ja oksaalihappoa tuotettiin suurimmat määrät. Myös muurahaishappoa ja meripihkahappoa saatiin tuotettua.

Physiological response of vicia faba to prohexadione-calcium under saline conditions

Changes in the activities of oxidative enzymes (indole acetic acid oxidase, peroxidase and catalase), endogenous hormones (gibberellic acid (GA3), indole acetic acid (IAA), abscisic acid (ABA) and cytokinins (AsZeatin), photosynthetic pigments (chlorophyll a, chlorophyll b and carotenoids), total carbohydrates, total soluble sugars, amino acid proline and vegetative growth parameters were used as indicators to explain the physiological role of the growth retardant prohexadione-calcium on Vicia faba seedlings 40 days after sowing under salinity stress for 30 days. The obtained results show that soaking faba bean seeds prior to sowing at different concentrations of prohexadione-calcium (0, 10, 20 and 30 ppm) significantly increased the activities of indole acetic acid oxidase (IAA-oxidase) and peroxidase enzymes, but decreased the catalase enzyme activity as compared with their respective control. Application of prohexadione-Ca caused markedly decreases in the endogenous contents of gibberellins and indole acetic acid (IAA) but increased the levels of natural growth inhibitor abscisic acid (ABA) and cytokinins in the shoots of faba bean seedlings. All the prohexadione-Ca concentrations increased the contents of amino acid proline, photosynthetic pigments (chlorophyll a, chlorophyll b and carotenoids), total carbohydrates and total soluble sugars in faba bean seedlings grown under salt stress. Application of prohexadione-Ca decreased significantly seedling height and shoot fresh weight but significantly increased shoot dry weight.

Production of Chemicals from Woody Biomass by Wet Oxidation

The production of chemicals from sawdust by wet oxidation has been investigated. Two different concentrations of sawdust; 54054 mg/l and 32683 mg/l were used in the study. The wet oxidation operating conditions were; 175 deg.C – 225 deg.C, 1MPa Oxygen, and 40 minutes to 120 minutes reaction time. Carboxylic acids were among the chemicals produced in the process. The total yield of carboxylic acids was found to increase with temperature. Also, higher yields of carboxylic acids were observed at a lower sawdust concentration. This was probably due to the high oxygen-biomass ratio at lower sawdust concentration. Higher oxygen availability at low sawdust concentration resulted in increased conversion of the sawdust; hence the higher yields of carboxylic acids. At lower sawdust concentration, a total carboxylic acid yield of 25.59 wt% was attained at 200 deg.C and 40 minutes reaction time. At higher sawdust concentration, a total carboxylic acid yield of 15.57 wt% was attained at 200 deg.C and 40-minutes reaction time. The carboxylic acids identified include formic acid, acetic acid, succinic acid and oxalic acid. The optimum temperature for the production of formic acid was found to be 200 deg.C, while the optimum temperature for the production of acetic acid was found to be 225 deg.C. A temperature of 225 deg.C and relatively short reaction time of 10 minutes was found to be the optimal condition for the production of succinic acid. Formic acid was produced in the highest yield, with an optimal yield of 13.69wt %, when the reaction temperature and time are 200 deg.C and 40 minutes respectively. The yield of formic acid was found to decrease significantly when further increasing the temperature to 225 deg.C. This was presumably due to thermal decomposition of formic acid at relatively higher temperature. However, the yield of acetic acid was found to steadily increase with temperature. This is because acetic is more thermally stable than formic acid. The yield of acetic acid did not decrease after the temperature was increased to 225 deg.C. Optimal yield of acetic acid (7.98wt %) was achieved at; 225 deg.C, and 40 minutes reaction time. Succinic acid was produced only at temperatures of 200 deg.C and 225 deg.C. Optimal yield of succinic acid (5.66wt %) was attained under the following conditions; 32683 mg/l, 225 deg.C, 1MPa O2, and 10-minutes reaction time. Oxalic acid was produced in the lowest yield and, less frequently. The optimal yield of oxalic acid (4.02 wt%) was attained at 175 deg.C and 80-minutes of reaction time The Total Organic Carbon (TOC) is found to be higher when increasing the operating temperature, thus suggesting that more organic compounds are formed at higher temperatures. The identified carboxylic acids could only account for less than 30% of the measured COD content of the various wet oxidation samples. This implies that some other unidentified compounds (reaction products) must have been present. In general, wet oxidation seems to be an effective method for converting lignocellulosic biomass into useful chemicals. Relatively higher temperatures have been found to favor the production of carboxylic acids from sawdust.

Cardiovascular responses to microinjection of trans-(±)-ACPD into the NTS were similar in conscious and chloralose-anesthetized rats

The changes in mean arterial pressure (MAP) and heart rate (HR) in response to the activation of metabotropic receptors in the nucleus tractus solitarii (NTS) with trans-(±)-1-amino-1,3-cyclopentanedicarboxylic acid (trans-(±)-ACPD) were evaluated in conscious and anesthetized Wistar, male rats weighing 240-260 g (N = 8). The responses obtained with trans-(±)-ACPD were compared with the responses to L-glutamate (1 nmol/100 nl), since in a previous study we showed that anesthesia converted a pressor response to L-glutamate microinjected into the NTS of conscious rats to a depressor response in the same rats under urethane or chloralose anesthesia. Microinjection of 3 doses of trans-(±)-ACPD (100, 500 and 1000 pmol/100 nl) produced a dose-dependent fall in MAP (range, -20 to -50 mmHg) and HR (range, -30 to -170 bpm) under both conscious and chloralose anesthesia conditions. These data indicate that the cardiovascular responses to the activation of metabotropic receptors by trans-(±)-ACPD are not affected by chloralose anesthesia while the cardiovascular responses to the activation of excitatory amino acid (EAA) receptors by L-glutamate are significantly altered