Reduction kinetics of NiO-YSZ composite for application in solid oxide fuel cell

A porous nickel-8 mol% yttria stabilized zirconia (Ni-8YSZ) composite, used as anode for solid oxide fuel cell, was obtained by reduction of NiO-8YSZ cermet. The first goal was the evaluation of the temperature effect of powder processing by thermogravimetry. In addition, the influence of porosity in the reduction kinetic of the sample sintered at 1450 A degrees C was evaluated. The final porosity produced in NiO-8YSZ composite by pore former was 30.4 and 37.9 vol.%, respectively, for 10 and 15 mass% of corn starch. The sample with 15 mass% of corn starch promotes a reduction rate almost twice higher than sample with 10 mass% of corn starch. The porosity introduced by the reduction of NiO was 23 vol.%.

Self-reinforced composites obtained by the partial oxypropylation of cellulose fibers. 1. Characterization of the materials obtained with different types of fibers

The in-depth oxypropylation of different types of cellulose fibers, namely Avicel, Rayon, Kraft, and Filter Paper, was investigated. New biphasic mono-component materials were obtained, which could be hot-pressed to form films of cellulose fibers dispersed into a thermoplastic matrix. The success of this chemical modification was assessed by FTIR spectroscopy, X-ray diffraction, scanning electron microscopy. differential scanning calorimetry, thermogravimetric analysis and contact angle measurements. The optimization of this process led to the establishment of the optimal molar ratio between the cellulose CH groups and propylene oxide, which varied as a function of the specific morphology of the fibers. (C) 2008 Elsevier Ltd. All rights reserved.

Extraction of cellulose whiskers from cassava bagasse and their applications as reinforcing agent in natural rubber

In this work cassava bagasse, a by-product of cassava starch industrialization was investigated as a new raw material to extract cellulose whiskers. This by-product is basically constituted of cellulose fibers (17.5 wt%) and residual starch (82 wt%). Therefore, this residue contains both natural fibers and a considerable quantity of starch and this composition suggests the possibility of using cassava bagasse to prepare both starch nanocrystals and cellulose whiskers. In this way, the preparation of cellulose whiskers was investigated employing conditions of sulfuric acid hydrolysis treatment found in the literature. The ensuing materials were characterized by transmission electron microscopy (TEM) and X-ray diffraction experiments. The results showed that high aspect ratio cellulose whiskers were successfully obtained. The reinforcing capability of cellulose whiskers extracted from cassava bagasse was investigated using natural rubber as matrix. High mechanical properties were observed from dynamic mechanical analysis. (C) 2010 Elsevier B.V. All rights reserved.

Pineapple Leaf Fibers for Composites and Cellulose

Pineapple leaf fiber (PALF) which is rich in cellulose, abundantly available, relatively inexpensive, low density, nonabrasive nature, high filling level possible, low energy consumption, high specific properties, biodegradability and has the potential for polymer reinforcement. The utilization of pineapple leaf fiber (PALF) as reinforcements in thermoplastic and thermosetting resins in micro and nano form for developing low cost and lightweight composites is an emerging field of research in polymer science and technology. In this paper we examines the industrial applicabiliy of PALF, mainly for production of composite materials and special papers, chemical feedstocks (bromelin enzyme) and fabrics.

Mechanical, thermal and morphological characterization of polypropylene/biodegradable polyester blends with additives

The (bio)degradation of polyolefins can be accelerated by modifying the level of crystallinity or by incorporation of carbonyl groups by adding pro-oxidants to masterbatches or through exposure to ultraviolet irradiation. In this work we sought to improve the degradation of PP by adding cobalt, calcium or magnesium stearate to Ecoflex(R), PP or Ecoflex(R)/PP blends. The effect of the pro-oxidants on biodegradability was assessed by examining the mechanical properties and fluidity of the polymers. PP had higher values for tensile strength at break and Young`s modulus than Ecoflex(R), and the latter had little influence on the properties of PP in Ecoflex(R)/PP blends. However, the presence of pro-oxidants (except for calcium) reduced these properties. All of the pro-oxidants enhanced the fluidity of PP, a phenomenon that facilitated polymer degradation at high temperatures. (C) 2009 Elsevier Ltd. All rights reserved.

Extrusion and characterization of functionalized cellulose whiskers reinforced polyethylene nanocomposites

The surface of ramie cellulose whiskers has been chemically modified by grafting organic acid chlorides presenting different lengths of the aliphatic chain by an esterification reaction. The occurrence of the chemical modification was evaluated by FTIR and X-ray photoelectron spectroscopies, elemental analysis and contact angle measurements. The crystallinity of the particles was not altered by the chain grafting, but it was shown that covalently grafted chains were able to crystallize at the cellulose surface when using C18. Both unmodified and functionalized nanoparticles were extruded with low density polyethylene to prepare nanocomposite materials. The homogeneity of the ensuing nanocomposites was found to increase with the length of the grafted chains. The thermomechanical properties of processed nanocomposites were studied by differential scanning calorimetry (DSC), dynamical mechanical analysis (DMA) and tensile tests. A significant improvement in terms of elongation at break was observed when sufficiently long chains were grafted on the surface of the nanoparticles. It was ascribed to improved dispersion of the nanoparticles within the LDPE matrix. (C) 2009 Elsevier Ltd. All rights reserved.

Nuclear magnetic resonance water relaxation time changes in bananas during ripening: a new mechanism

BACKGROUND: Nuclear magnetic resonance studies of banana fragments during ripening show an increase on the water transverse relaxation time (T(2)) and a decrease in water self-diffusion coefficient (D). As T(2) and D are normally directly correlated, we studied these two properties in intact bananas during ripening, in an attempt to rule out the effect of injury on the apparent discrepancies in the behavior of T(2) and D. RESULTS: The results show that injury in bananas causes a decrease in T(2) of the water in vacuoles (T(2vac)). They also show that T(2vac) increased and D decreased during ripening, ruling out the injury effect. To explain the apparent discrepancies, we propose a new hypothesis for the increase in T(2) values, based on the reduction of Fe(3+) ions to Fe(2+) by galacturonic acid, produced by the hydrolysis of pectin and a decrease in internal oxygen concentration during ripening. CONCLUSION: As injury alters T(2) values it is necessary to use intact bananas to study relaxation times during ripening. The novel interpretation for the increase in T(2vac) based on reduction of Fe(+3) and O(2) concentration is an alternative mechanism to that based on the hydrolysis of starch in amyloplasts. (C) 2010 Society of Chemical Industry

Diet, nutrition and the prevention of excess weight gain and obesity

Objective: To review the evidence on the diet and nutrition causes of obesity and to recommend strategies to reduce obesity prevalence.
Design: The evidence for potential aetiological factors and strategies to reduce obesity prevalence was reviewed, and recommendations for public health action, population nutrition goals and further research were made.
Results: Protective factors against obesity were considered to be: regular physical activity (convincing); a high intake of dietary non-starch polysaccharides (NSP)/fibre (convincing); supportive home and school environments for children (probable); and breastfeeding (probable). Risk factors for obesity were considered to be sedentary lifestyles (convincing); a high intake of energy-dense, micronutrient-poor foods (convincing); heavy marketing of energy-dense foods and fast food outlets (probable); sugar-sweetened soft drinks and fruit juices (probable); adverse social and economic conditions—developed countries, especially in women (probable).
A broad range of strategies were recommended to reduce obesity prevalence including: influencing the food supply to make healthy choices easier; reducing the marketing of energy dense foods and beverages to children; influencing urban environments and transport systems to promote physical activity; developing community-wide programmes in multiple settings; increased communications about healthy eating and physical activity; and improved health services to promote breastfeeding and manage currently overweight or obese people.
Conclusions: The increasing prevalence of obesity is a major health threat in both low- and high income countries. Comprehensive programmes will be needed to turn the epidemic around.

In vitro carbohydrate digestibility of whole-chickpea and chickpea bread products

Pulses such as the chickpea are generally considered to be valuable dietary sources of slowly digestible starch, a form of starch that is considered beneficial to health since it results in relatively low post-meal blood glucose levels compared with more rapidly digested starch. The development of novel chickpea-based foods is necessary to help expand the worldwide consumption of the chickpea. However, the effect of different processing methods on the starch digestibility of chickpea-based foods has not been widely investigated. This study used an in vitro method simulating human carbohydrate digestion to determine levels of slowly digestible starch, rapidly digestible starch (RDS), resistant starch, total starch and rapidly available glucose (RAG) of: (i) whole-chickpea products (domestically boiled, commercially canned and commercially precooked/vacuum-packaged); and (ii) standard white bread, chickpea flour bread (25% replacement of wheat flour by chickpea flour) and extruded chickpea flour bread (25% replacement of wheat flour by extruded chickpea flour). The RAG levels were then used to predict the relative in vivo glycaemic indices of the products. The commercially precooked/vacuum-packaged whole chickpeas demonstrated higher levels of RDS than the commercially canned and domestically boiled products (P<0.05). In addition, the domestically boiled product had lower levels of RAG (g/100 g available carbohydrate) compared with the canned and precooked/vacuum-packaged products (P<0.05). There were no significant differences between any of the carbohydrate digestibility measures of the white bread, chickpea flour bread and extruded chickpea flour bread (P>0.05) and all bread products demonstrated far higher RAG (g/100 g available carbohydrate) values than the whole-chickpea products. The findings suggest that the commercially precooked/vacuum-packaged whole chickpeas and the canned product may have higher and less beneficial glycaemic indices than the domestically boiled chickpeas. It appears unlikely that the use of chickpea flour or extruded chickpea flour, at the incorporation rate investigated in this study, would modify the glycaemic index of bread. It is probable, however, that the chickpea bread products investigated would demonstrate higher and potentially less beneficial glycaemic indices than the whole-chickpea products.

Effect of storage on the biochemical and processing quality of Adzuki Bean (Vigna angularis)

Storage of adzuki beans and other pulse grains causes biochemical and physical changes that affect the hydration properties of the beans. This affects the quality of products made from the beans such as the Japanese bean paste “ann.” Storage, particularly under unfavourable conditions, leads to the “hard shell” phenomenon, where beans fail to imbibe water when soaked and remain hard, and the “hard-to-cook” phenomenon where the seeds hydrate normally, but the cotyledon fails to hydrate and soften during cooking. The hard shell phenomenon is attributable to impermeability of the seed coat to water, which is due to biochemical changes in the seed coat, such as the formation of protein-tannin complexes, and biophysical changes such as reduction in size or closure of the straphiole aperture in the hilum area—the main area for water entry into the adzuki bean. The hard-to-cook phenomenon is due to changes in the cotyledon tissue, which include formation of insoluble pectinates, lignification of the cell wall and middle lamella, interaction of condensed tannins with proteins and starch, and changes to the structure and functionality of the cellular proteins and starch.

Manufacturing influence on the delamination fracture behavior of the T800H/3900-2 carbon fiber reinforced polymer composites

'Torayca' T800H/3900-2 is the first material qualified on Boeing Material Specification (BMS 8-276) which utilizes the thermoplastic-particulate interlayer toughening technology. Two manufacturing processes, the autoclave process and the fast heating rated Quickstep™ process, were employed to cure this material. The Quickstep process is a unique composite production technology which utilizes the fast heat transfer rate of fluid to heat and cure polymer composite components. The manufacturing influence on the mode I delamination fracture toughness of laminates was investigated by performing double cantilever beam tests. The composite specimens fabricated by two processes exhibited dissimilar delamination resistance curves (R-curves) under mode I loading. The initial value of fracture toughness GIC-INIT was 564 J/m2 for the autoclave specimens and 527 J/m2 for the Quickstep specimens. However, the average propagation fracture toughness GIC-PROP was 783 J/m2 for the Quickstep specimens, which was 2.6 times of that for the autoclave specimens. The mechanism of fracture occurred during delamination was studied under scanning electron microscope (SEM). Three types of fracture were observed: the interlayer fracture, the interface fracture, and the intralaminar fracture. These three types of fracture played different roles in affecting the delamination resistance curves during the crack growth. More fiber bridging was found in the process of delamination for the Quickstep specimens. Better fiber/matrix adhesion was found in the Quickstep specimens by conducting indentation-debond tests.

Nutritional aspects of food extrusion: a review

Extrusion cooking, as a multi-step, multi-functional and thermal/mechanical process, has permitted a large number of food applications. Effects of extrusion cooking on nutritional quality are ambiguous. Beneficial effects include destruction of antinutritional factors, gelatinisation of starch, increased soluble dietary fibre and reduction of lipid oxidation. On the other hand, Maillard reactions between protein and sugars reduce the nutritional value of the protein, depending on the raw material types, their composition and process conditions. Heat-labile vitamins may be lost to varying extents. Changes in proteins and amino acid profile, carbohydrates, dietary fibre, vitamins, mineral content and some non-nutrient healthful components of food may be either beneficial or deleterious. The present paper reviews the mechanisms underlying these changes, as well as the influence of process variables and feed characteristics. Mild extrusion conditions (high moisture content, low residence time, low temperature) improve the nutritional quality, while high extrusion temperatures (200 °C), low moisture contents (<15%) and/or improper formulation (e.g. presence of high-reactive sugars) can impair nutritional quality adversely. To obtain a nutritionally balanced extruded product, careful control of process parameters is essential.

The role of TaABF1 in abscisic acid-mediated suppression of -amylase gene expression in cereal grains

The phytohormones gibberellin (GA) and abscisic acid (ABA) regulate important developments events in germinating seeds. Specifically, GA induces the expression of hyrolase genes, like the α-amylase gene Amy32b, which mobilizes starch reserves to be used by the embryo, and ABA suppresses this induction. Recent advancements identified ABA and GA receptors and key components in the signaling pathways, however, the mechanism of crosstalk between the hormones remains largely unknown. To further elucidate the mechanism of ABA suppression of GA-induced genes, we focused on the transcription factor TaABF1, a member of the ABA response element binding factor family. TaABF1 has been shown to physically interact with the SnRK2 kinase PKABA1 and overexpression of TaABF1 or PKABA1 can suppress Amy32b. We carried out particle bombardment experiments to investigate how TaABF1 suppresses Amy32b and how TaABF1 is activated by ABA. The role of TaABF1 in ABA-mediated suppression of Amy32b is more complicated than hypothesized. Unlike PKABA1, overexpression of TaABF1 did not cause a decrease of GAMyb expression and in fact resulted in an increase of GAMyb expression. When TaABF1 and GAMyb were simultaneously overexpressed in aleurone, the GAMyb induction of Amy32b was unaffected, indicating that the target of TaABF1 action must be upstream of GAMyb. Furthermore, TaABF1 and ABA demonstrated an additive effect on the suppression of Amy32b. Based on our findings, we propose a model in which PKABA1 activates two separate targets, one being TaABF1 which then modifies an unknown target upstream of GAMyb and the other being an unknown transcription factor that suppresses GAMyb transcription.

Latex-based nanocomposites

Nanoparticles have been widely used as filler in polymer because of their unique reinforcing effect. There are many compounding methods for nanocomposites. The recent development on latex nanocomposites, a group of special nanocomposites, is reviewed in this chapter. They include carbon black/latex nanocomposite, silica/latex nanocomposite, layered silicate/latex nanocomposite, ZnO/latex nanocomposite, carbon nanotubellatex nanocomposite, lignin/latex nanocomposite, starch/latex nanocomposite, nano-fiber/latex nanocomposite, and Chitin whiskers/latex nanocomposite. Advanced compounding techniques and the latest advance on these latex nanocomposites are described. The nanoreinforcing theories of latex nanocomposites are also studied.

Consistent model predictions for isothermal cure kinetics investigation of high performance epoxy prepregs

An accurate kinetics model is essential for understanding the curing mechanism and predicting the end properties of polymer materials. Graphite/epoxy AS4/ 8552 prepreg is a recent high-performance thermosetting composite modified with thermoplastic, which is being used in the manufacture of aircraft and military structures. The isothermal cures of this system along with another thermoplastic toughened high-performance prepreg, the T800H/3900-2 system, were investigated by real-time Fourier transform infrared (FTIR) spectroscopy. The cure rate was quantitatively analyzed based on the concentration profiles of both the epoxy and primary amine groups. Three autocatalytic models were used to determine kinetics parameters for both composite systems. The model which utilizes an empirical term, the final relative conversion (at different isothermal curing temperatures), describes the experimental data of both systems more satisfactorily than the model which applies a diffusion factor. The modeling results suggest that the curing of epoxy within both prepregs can be assumed to be a second order process.