Strengthening the log book recording system for fishing vessels: Sri Lanka

Activities of the project included: preparation of awareness materials on data reporting; organizing stakeholder awareness programmes; setting and maintaining an electronic database; inputs from participants and recommendations

Department of Fisheries Resources Annual Report 2010/2011

The Department of Fisheries Resources (DFR) under MAAIF and Directorate of Animal Resources is the technical Department mandated to promote, support and guide the Fisheries Sector in Uganda. The Department also retains the responsibility for setting and enforcing the standards and regulations for practices pertaining to fisheries. The Department compiles data and information for its own use and for dissemination to stakeholders. This publication is an annual product to support evidence-based decision making, planning and assessing progress in the formulation and implementation of policy to better manage the fisheries resource.

La reproducción de la merluza en el Mar Argentino (Merlucciidae, Meluccius merluccius hubbsi) : 1. Descripción histológica del ciclo del ovario de merluza

The present paper deals on the histological description of the hake ovary made on the basis of gonad observations of 394 females during the period April 1966 March 1967. The material was obtained from weekly sampling of commercial catches carried out at the Institute of Marine Biology (Prov. Buenos Aires, Argentina). The anatomical and histological description of the standard ovary and the adopted terminology are given. The maturation process is divided into five periods, from ovocyte formation to yolked ovocyte formation, with its histological description. Ovary changes are analyzed on detail. The following conclusions were outlined: 1. Analysis demonstrated that although some specimens were totally spawned others, at the end of the spawning period, retaining a great number of ovocytes in different maturity stages. Therefore, postspawners have been classified as follows: Postspawned II : This stages is characterized by the empty ovarian structure, with ovocytes in stage II, which will remain in the resting phase untill next spawning season. Postspawned III and IV: Their main characteristics are: tissue destruction, bloody residuals and remaining ovocytes in stage III and IV, respectively. 2. Some transformations were found in ovaries of postspawned III and IV. They are classified as follows, according to its origin and structure: Developed from follicular cell membrane – a) Glandular formations, b) Epiteloid formations - Originated from remaining ovocytes, c) Ovocyte disintegration, d) Ovocyte with follicular cell infiltration. 3. All those structures derived from postpawners III and IV have a temporary character and will be reabsorbed. Their presence delay the recuperation of the organ and its reproductive functions. Consequently, the possibility of those structures acting as control mechanisms is suggested. 4. Transformations pointed out in paragraph Nº 2 prevent the possibility of consecutive spawning originated from the remaining ovocytes (II and IV). 5. No structures originated from postspawners III and IV were found during summer season. 6. Reproductive cycle of hake has been described monthly. It was observed that maturing ovaries predominate in summer (November-December).

Paradoxical evidence integration in rapid decision processes

Decisions about noisy stimuli require evidence integration over time. Traditionally, evidence integration and decision making are described as a one-stage process: a decision is made when evidence for the presence of a stimulus crosses a threshold. Here, we show that one-stage models cannot explain psychophysical experiments on feature fusion, where two visual stimuli are presented in rapid succession. Paradoxically, the second stimulus biases decisions more strongly than the first one, contrary to predictions of one-stage models and intuition. We present a two-stage model where sensory information is integrated and buffered before it is fed into a drift diffusion process. The model is tested in a series of psychophysical experiments and explains both accuracy and reaction time distributions. © 2012 Rüter et al.

Functional magnetic resonance imaging of impaired sensory prediction in schizophrenia.

IMPORTANCE: Forward models predict the sensory consequences of planned actions and permit discrimination of self- and non-self-elicited sensation; their impairment in schizophrenia is implied by an abnormality in behavioral force-matching and the flawed agency judgments characteristic of positive symptoms, including auditory hallucinations and delusions of control. OBJECTIVE: To assess attenuation of sensory processing by self-action in individuals with schizophrenia and its relation to current symptom severity. DESIGN, SETTING, AND PARTICIPANTS: Functional magnetic resonance imaging data were acquired while medicated individuals with schizophrenia (n = 19) and matched controls (n = 19) performed a factorially designed sensorimotor task in which the occurrence and relative timing of action and sensation were manipulated. The study took place at the neuroimaging research unit at the Institute of Cognitive Neuroscience, University College London, and the Maudsley Hospital. RESULTS: In controls, a region of secondary somatosensory cortex exhibited attenuated activation when sensation and action were synchronous compared with when the former occurred after an unexpected delay or alone. By contrast, reduced attenuation was observed in the schizophrenia group, suggesting that these individuals were unable to predict the sensory consequences of their own actions. Furthermore, failure to attenuate secondary somatosensory cortex processing was predicted by current hallucinatory severity. CONCLUSIONS AND RELEVANCE: Although comparably reduced attenuation has been reported in the verbal domain, this work implies that a more general physiologic deficit underlies positive symptoms of schizophrenia.

Aerodynamic design of high end wall angle turbine stages-part I: Methodology development

A design methodology is presented for turbines in an annulus with high end wall angles. Such stages occur where large radial offsets between the stage inlet and stage outlet are required, for example in the first stage of modern low pressure turbines, and are becoming more prevalent as bypass ratios increase. The turbine vanes operate within s-shaped ducts which result in meridional curvature being of a similar magnitude to the bladeto-blade curvature. Through a systematic series of idealized computational cases, the importance of two aspects of vane design are shown. First, the region of peak end wall meridional curvature is best located within the vane row. Second, the vane should be leant so as to minimize spanwise variations in surface pressure-this condition is termed "ideal lean." This design philosophy is applied to the first stage of a low pressure turbine with high end wall angles. © 2014 by ASME.

Vc“二步发酵法”最佳组合生产菌系的选育及其“工程菌”的构建

对24株不同组合的Vc“二步发酵法”生产菌系中筛选出了最佳组合生产菌系H_(19)S_(19)。对该菌系的形态学及生理生化特性的研究表明，H_(19)为地衣芽孢杆菌，S_(19)的分类地位目前还难以确定，但与尹光琳等报道的氧化葡萄糖酸杆菌相比，具有许多新的不同特点。用单亲本灭活的原生质体融合技术进行了H_(19)和S_(19)以及132及S_(19)的原生质体融合，共获得400株重组子，其中有2株产生2--酮基--L--古龙酸产量高且稳定性好的重组子。其中一株是由H_(19)和S_(19)原生质体以H_(19)为背景融合产生的，另一侏是132和S_(19)原生质体以S_(19)为背景产生的。

若尔盖湿地公路对两栖类的生态影响

本文考察了若尔盖高寒泥炭湿地公路对高原林蛙（Rana kukunoris）、倭蛙（Narorana pleskei）和岷山蟾蜍（Bufo minshanicus）的生态影响。分析了公路对两栖动物空间分布和栖息地利用的影响，并用IBM模型探讨其可能作用机制，考察了两栖动物公路死亡的季节差异及影响公路死亡空间分布的景观因素。最后通过对若尔盖高寒湿地两栖动物陆地核心栖息地的分析，为若尔盖路域栖息地的管理提供依据。 1. 对公路周边6个沼泽水凼群进行了调查，每个样地设置5条样线（距离公路10m、20m、50m、100m和150m）。调查表明，在繁殖季节(5月)，距离公路距离对高原林蛙和倭蛙的相对数量都有显著作用，其效应明显大于其他各项栖息地环境参数。公路导致高原林蛙和倭蛙在公路周边种群密度降低，其相对数量从距离公路100m处到公路边缘一直呈现逐渐降低的趋势。在繁殖季节，若尔盖高寒湿地的公路生态影响域大约在100-150m之间，这一距离远远大于森林栖息地中公路对两栖类的生态影响域（35-40 m）。 在繁殖后期（9月），对公路周边16个草地样点的样线调查表明，公路对周边高原林蛙和倭蛙密度分布并未造成显著影响。 2. 二次模型的拟合表明繁殖季节高原林蛙和倭蛙在公路周边的密度分布符合钟型曲线。前人对森林公路两侧两栖类分布的研究也显示了类似的规律。我们通过基于个体的模型，模拟在了公路边缘100单位距离内的栖息地空间，栖息地环境质量呈梯度变化，动物个体在其中通过随机运动寻找适宜的栖息地。拟合结果表明，动物个体仅仅依照简单的运动规则寻找适宜栖息地，这种活动就可以导致公路周边栖息地中的动物分布曲线出现3个局部峰。公路周边两栖动物的钟型分布曲线可能仅仅是个体寻找适宜栖息地过程中出现的临时性群体分布模式。 3. 在若尔盖高寒湿地，公路交通造成了大量两栖类死亡。但是公路两栖类动物死亡的季节分布很不均匀：5月、8月和9月死亡数量很高，而7月和10月死亡数量却很低。这种季节性差异和两栖类各个生活史阶段的迁移运动有密切的关系。利用景观参数的逻辑斯蒂回归模型显示，距离公路1000-2000m范围内的湿草地比例对三种两栖类公路死亡概率均有很强的贡献。湿草地这一栖息地类型分类中有大量的沼泽水体，是两栖类重要的繁殖点和取食点。两栖类公路死亡概率湿草地的关系从一个侧面表明，要维持一个区域较高的两栖类种群数量，需要1000-2000m半径范围内存在大面积的湿草地。 4. 高原林蛙和岷山蟾蜍不同性别和年龄个体分布点的水体距离存在显著差异。不同种类、年龄的两栖类分布点距离水体距离的差异可能是由于对水体的依赖性造成的。而相同种类、年龄段的个体中，高原林蛙雌性、岷山蟾蜍亚成体和雌性的体重与分布点距水体距离有显著负相关，这可能是因为体重更大的个体对水体的依赖性更弱。考虑到过大的陆地核心栖息地面积在实际保护工作中存在操作上的困难，因此我们认为可以以水体周边90%个体的分布区为低限确定3种两栖类的最小陆地核心栖息地。但是，在同样的水体距离-两栖类密度分布格局下，水体的面积和分形参数对最小陆地核心栖息地半径的确定有一定影响。 Ecological effects of alpine wetland road on Rana kukunoris, Narorana pleskei, Bufo minshanicus was studied in Zoige wetland. The effects of road on distribution of amphibians and its possible underline mechanism was discussed based on empirical data and computer simulation. Road killed amphibians was surveyed in different season and those landscape factor which could have impact on road killing distribution was analyses. Core terrestrial habitat of amphibians in Zoige wetland was discussed in the consideration of conservation management. 1. Six pool groups was investigated in breeding season (May) of R. kukunoris, N. pleskei. Five transects at distance of 10m, 20m, 50m, 100m and 150m from road edge was surveyed in each pool groups. There was a significant effects of distance from road edge on relative counts of R. kukunoris, N. pleskei, which is much important than effects of other environmental factors. Road caused the density of R. kukunoris, N. pleskei decreased from distance of 100m from road to 10m from road. Road ecological effect zone of alpine wetland for amphibians is about 100-150m. It is much wider than those of forest roads, which is about 35-40m. However, studies on 16 grassland near road showed no significant effect of road on amphibians after breeding season (Sep.). 2. Quadratic model fit indicated that the distribution of R. kukunoris and N. Pleskei followed a hump like curve. Previous studies on forest road showed similar results. A 100×100 habitat with gradual environment besides road was simulated with a individual-based model, and animal seek for suitable habitat with stochastic locomotion in it. Simulation results indicated that 3 density peak of animal distribution can emergent followed a simply rules. The hump like density cure could be a temporal swarm pattern during the process of individual seeking for habitat. 3. Road traffic caused mass death of amphibians in Zoige wetland. There was much road killed amphibians in May, Aug and Sep than those in July and Oct. The fluctuation of road kill could be related with migration of amphibians between seasons. Logistic regression of landscape variables indicated that wet grassland in 1000-2000m is essential to predict the probability of road kill. Wet grassland is an important breeding and forage habitat for amphibians. It also indicated that mass wet grassland in 1000-2000m is essential for maintain a big amphibian population. 4. There was significant differences among distance from aquatic site of subadults, female and males of R. kukunoris and B. Minshanicus. Possibly, it was because of their dependence on water. There was a significant negative relationship between distance from aquatic site and individuals body mass. Estimates of core habitat that are too large may make it difficult to establish protective regulations. The smallest suitable terrestrial core habitats were defined as the terrestrial habitats used during migration to and from the wetlands, and for foraging by 90% of any life stage (adults, and subadults) in a season. However, even with the same amphibian distribution pattern along the distance from aquatic sites, the radii of smallest suitable terrestrial core habitats will be varied with the fractal parameters of aquatic site.

水稻同源四倍体高代自交系农艺性状分析及遗传差异研究

课题组在不断地创制新的同源四倍体材料的同时，连续多年以提高结实率为目的培育、筛选自交系材料，已获得自交繁殖十二年的高代自交系材料。相对于诱导创制初期，材料表现出的结实率低，同种系单株间的差异较大；高代材料已表现出较显著的结实率提升和较一致的农艺性状表型。 本实验选取课题组多年培育的同源四倍体水稻高代自交系材料，通过形态学、农艺性状和细胞遗传学比较，研究水稻同源四倍体与二倍体之间的异同。结果显示，所有同源四倍体材料的染色体组成均为2N=4X=48，花粉母细胞(PMC)减数分裂行为较正常，99%以上的染色体都能在减数分裂中期I（MI）发生联会、配对，形成四价体和二价体，这与理论染色体组构成相符。在减数分裂过程中，结实率较高的材料染色体异常现象较少而结实率较低的材料染色体异常现象较严重。统计分析表明，二价体和四价体的比例对结实率没有显著影响，但是三价体的数目对结实率有一定影响。这一结果表明了结实率和细胞减数分裂行为可能存在相关性，同源四倍体的减数分裂行为为筛选高结实率的同源四倍体种系提供了依据。 然后，对同源四倍体水稻高代自交系材料进行农艺性状和品质性状的统计与分析。主要针对结实率、每穗实粒数、有效分蘖和穗长等主要农艺性状，以及直链淀粉含量这一重要的品质性状进行统计。将统计结果与1996年诱导加倍的初代材料的数据相对比分析，结果显示所有材料经过多代选育培养，其农艺性状已经有了较显著的提高，同时同源四倍体材料的农艺性状稳定性也有了较显著的提升。如结实率的提高幅度较大，所有材料的平均结实率均显著高于加倍初代，而同种材料不同单株间的结实率差异也显著地减少，变异系数（CV）的平均值由1996年的41.15%减少到了2008年的28.81%。其他重要农艺性状也有不同程度的改良，种内变异系数也相应地降低。此外，实验测量了同源四倍体材料和来源二倍体材料的直链淀粉含量。分析结果显示，部分材料的直链淀粉含量与二倍体亲本产生了较显著的差异，这可能是诱导加倍过程中的遗传变异造成的；同源四倍体材料的种内变异系数（CV）平均值由1996年的6%下降到了2008年的3.88%，显示出在品质性状方面，同源四倍体材料的遗传稳定性也有较显著的增加。同源四倍体材料农艺性状经过多年的选育，表现出一定的提升，同时，经过多年自交纯化，所有材料种系内的性状差异逐渐缩小，说明同源四倍体水稻的遗传稳定性随着自交纯化而增强，这为同源四倍体水稻的进一步选育打下了良好的基础。 最后，通过测量连续两年的自交系材料的遗传多态性，分析材料间遗传差异和种群遗传结构，深入研究连续两代材料间的遗传差异，研究同源四倍体水稻与二倍体材料遗传稳定性之间的差异。实验采用18对SSR微卫星标记对连续两代15个材料，共94份样本进行差异分析。通过扩增条带长度多态性分析，计算不同材料以及同种材料不同世代间的遗传距离，构建同源四倍体和二倍体水稻的分子指纹库，并绘制聚类图。结果显示，同源四倍体和二倍体不同材料间的遗传差异比较大，遗传距离处于0.4757至0.2816之间；而相同品种不同世代材料间的遗传差异较小，但也表现出一定的遗传差异。同种同源四倍体材料不同世代间的遗传差异比二倍体材料更大，两代四倍体材料间遗传距离处于0.1359至0.0485之间；而两代二倍体材料间的遗传距离处于均小于0.0388。结果表明，同源四倍体水稻高代材料具有一定的遗传稳定性，但与来源二倍体材料相比，其世代间的遗传变异性仍然较强。这种结果说明，经过多代的自交纯化培育，同源四倍体水稻材料能够建立起相对稳定的遗传结构，同时，其强于二倍体亲本的变异性有能够为新品种的选育，农艺性状、品质性状的改良提供一定的遗传基础。此外，分析结果表明通过分子标记辅助检验，水稻材料间的遗传多态性能够有效地区分不同的品种，这为水稻品种的分子鉴定提供了一定的依据。 本研究从细胞学鉴定，农艺性状统计分析以及分子标记辅助聚类分析多方面地对同源四倍体水稻高代系进行了研究，对探究同源四倍体水稻的遗传规律，进一步揭示其遗传特性、农艺性状的遗传构成，为进一步选育优质的多倍体水稻提供了一定的理论依据。 This group insists on creating new Autotetraploid Rice (Oryza sativa L.) materials, while improving the seed-setting of them for many years, cultivated and selected the inbred line materials, has obtained the high generation inbred lines after twelve years cultivation. Compared to the early induced materials, which shown the low seed setting, and the large difference between the different plants in the same germ-line; the high generation materials have shown significant improvement in seed setting and more uniform phenotype agronomic traits. The autotetraploid rice high generation inbred lines material, which has been cultivated for more than 12 years, was chose in this experiment. The similarities and differences between autotetraploid and diploid rice was studied through morphological, agronomic and cytogenetic ways. The results showed that all the chromosome of autotetraploid materials are composed of 2N=4X=48, the pollen mother cells (PMC) meiosis behavior is normal, more than 99% chromosomes in metaphase I(MI) were federated and paired to form tetravalents or bivalents, which constitutes a consistent theory of genome. In the meiosis process, the material with a higher seed setting showed less chromosome abnormal than the material whose seed setting is lower. However, statistical analysis showed that the bivalent and tetravalent rate had no significant impact on seed setting, but the number of trivalent had a certain impact on seed setting. The result shows that the seed setting may be related to the meiosis behavior, which provides a basis to cultivate new autotetraploid germ line with high seed setting through the meiotic behavior. Furthermore, the agronomic and quality traits of autotetraploid rice high generation inbred material were statistically analyzed. The statistically analysis was focused on major agronomic traits such as: seed setting, grains per panicle, effective tillers and panicle length, as well as the important quality trait amylose content. The statistic data was compared with the data in 1996, when the first induced generation of autotetraploid material, and the result shows that after a multi-generation breeding, the agronomic traits has been significantly improved in all the materials, while the stability of agronomic traits also significant upgraded. For instant, the seed setting increased significantly, the average seed setting of all materials was significantly higher than the first induced generation, and the differences between different plants in the same species also significantly reduced, the average of the coefficient of variation (CV) was reduced from 41.15% in 1996 to 28.81% in 2008. Other important agronomic traits had improved in different degrees; the coefficient of variation within species is also reduced accordingly. In addition, the amylose content of autotetraploid and diploid materials was measured in this experiment. The results shows that the amylose content of some of the material differed from diploid parents significantly, it may caused by the genetic change during the inducing, autotetraploid materials intra-specific coefficient of variation (CV) average reduced from 6% in 1996 to 3.88% in 2008, shows that this is a significant increase of quality traits stability in autotetraploid rice. Agronomic traits of autotetraploid material shows some improvement after years of breeding, at the same time, after years of purification, all material within the germ-line gradually narrow the differences in traits indicates that autotetraploid rice genetic stability was enhanced, which laid a good foundation for the further autotetraploid rice breeding. Finally, this experiment studied the genetic differences between materials of two generations and researched the difference of genetic stability between diploid and autotetraploid rice materials through investigating the genetic polymorphism, genetic differences between materials and population genetic structure of inbred line materials of two consecutive years.18 pairs of SSR microsatellite markers for 15 materials of two generations were used in this experiment, and the total of 94 samples were analyzed. Through the amplification length polymorphism analysis of different materials and materials in different generations, the genetic distance between materials and generations was analyzed, a diploid and autotetraploid rice molecular fingerprint database and map rendering cluster were constructed. The result shows that the genetic distance is between 0.4757 to 0.2816 among different autotetraploid and diploid materials; the genetic distance between different generations of same species was less, but also shows a certain degree of genetic differences. The inter-generational genetic differences of autotetraploid materials were greater than of the diploid materials, which are 0.1359 to 0.0485 as the genetic distance; comparing with the 0.0388 of diploid materials. The result shows that high generation inbred autotetraploid rice material has a certain genetic stability, but the genetic variation between generations is still strong comparing with the source diploid materials. It indicates that, after many generations of purification cultivation, autotetraploid rice materials established a relatively stable genetic structure, at the same time, stronger variability than its diploid parents are useful in the breeding of new varieties, provides a genetic foundation to the agronomic and quality traits improvement. In addition, the analysis result shows that the through the molecular marker-assisted testing, rice genetic polymorphism between materials can effectively distinguish different species, provides a certain basis for molecular identification of varieties of rice. A series of investigation such as cytological identification, statistical analysis of agronomic traits, molecular marker-assisted cluster analysis was applied in this experiment to research genetic pattern of autotetraploid rice high generation inbred lines, revealed the genetic characteristics and the genetic composition of agronomic traits, provides a theoretical basis for the further selection of high quality autotetraploid rice.

多接收者环境下的匿名性和密文长度缩短的匿名广播加密算法

形式化构建了在多用户环境和随机数复用多用户环境下的匿名性安全模型,并证明了其安全性;同时提出了2种针对匿名性的可复制测试.基于这些结果,构造了一个通用的密文长度缩短的匿名广播加密算法.

ENTANGLEMENT FLUCTUATION DURING PHASE-SEPARATION IN POLYMER BLENDS

For perhaps the first time, the dynamics of liquid-liquid phase separation was studied by time-resolved mechanical spectrometry in order to establish the relationship between blends' properties and the phase structures during spinodal decomposition (SD). The selected system was chlorinated polyethylene (CPE)/ethylene-vinyl acetate copolymer (EVA). It was found that in the early and intermediate stage of SD, the storage modulus (G') and the loss modulus (G'') increase with time after the initiation of the isothermal phase separation; in the later stage, G' and G'' decrease as phase separation proceeds. An entanglement fluctuation model was presented to manifest this phenomenon; it was found that the rheological behavior agrees well with the expections of the model in the early stage. For the later stage, the reduction of G' and G'' can be attributed to the increment of phase-domain size. (C) 1993 John Wiley & Sons, Inc.

Sea surface temperature reconstruction for the middle Okinawa Trough during the last glacial-interglacial cycle using C-37 unsaturated alkenones

C-37 unsaturated alkenones were analyzed on a core retrieved from the middle Okinawa Trough. The calculated U-37(K') displays a trend generally parallel with those of the oxygen isotopic compositions of two planktonic foraminiferal species, Neogloboquadrina dutertrei and Globigerinoides sacculifer, suggesting that in this region, SST has varied in phase with global ice volume change since the last glacial -interglacial cycle. The U-37(K')-derived SST ranged from ca. 24.0 to 27.5 degrees C, with the highest value 27.5 degrees C occurring in marine isotope stage 5 and the lowest similar to 24.0 degrees C in marine isotope stage 2. This trend is consistent with the continental records from the East Asian monsoon domain and the marine records from the Equatorial Pacific. The deglacial increase of the U-37(K')-derived SST is similar to 2.4 degrees C from the Last Glacial Maximum to the Holocene. (c) 2007 Elsevier B.V. All rights reserved.

铜管不锈钢管腐蚀性能及铁牺牲阳极保护研究

铜管一直是电厂凝汽器的主要应用管材，但由于其抗冲刷和抵御污染物腐蚀的能力差，特别不耐氨蚀，美国和欧洲大量使用不锈钢管替代铜管作为冷凝管，然而不锈钢管在我国的运用仅处于初步阶段。 常使用锌、铝阳极对铜管进行牺牲阳极保护，然而存在着电位差过大、阳极溶解过快的问题。铁基牺牲阳极与铜电位差适当、来源广泛、价格便宜，在一些工程上有所应用，但是目前针对铁基牺牲阳极的理论研究报道很少。 本文选用紫铜管、304不锈钢管作为实验用管材，首先运用实验室全浸实验、极化曲线和电化学阻抗研究了二者在海水和淡水中的腐蚀性能以及CO2、溶解氧对其腐蚀的影响。结果表明：CO2会加速二者的腐蚀，溶解氧却对它们的腐蚀影响不同，促进铜管的腐蚀却抑制不锈钢管的腐蚀；随浸泡时间的延长，紫铜管由于表面产物膜的生成耐蚀性提高，304不锈钢管的耐蚀性却降低；淡水中，304不锈钢管和紫铜管都具有很好的耐蚀性能。随后，运用失重法和极化曲线对比研究了紫铜管、304不锈钢管的氨蚀性能，运用SEM分析和电化学阻抗研究了紫铜在不同浓度氨溶液中的腐蚀机理。发现，304不锈钢管的耐氨蚀能力远远好于铜管；溶解氧是影响氨蚀的关键因素，其对二者氨蚀的影响也不同；紫铜管在低氨浓度和高氨浓度溶液中腐蚀机理和产物不同，低氨浓度时形成保护性的产物膜（CuO 和Cu(OH)2），高氨浓度时由活化溶解控制，生成可溶的[Cu (NH3)4]2+。 选用工业纯铁、35钢为牺牲阳极材料。恒电流实验结果表明它们具有良好的牺牲阳极性能；通过极化曲线和自腐蚀电位测试分析，认为将二者用于铜管牺牲阳极保护是可行的；实验室阴极保护效果测试表明，工业纯铁和35钢对紫铜管具有良好的保护效果，保护度达90%以上。

智能测控系统中动态规则检验的实现

提出了一种动态规则设定和检验的实现方法。该方法可在不改变智能测控系统主体程序的情况下,灵活地改变其工作方式;不仅占用系统资源极少,而且提高了系统的运行效率;有效地解决了测控系统中难以实现动态规则的设定和检验问题。给出了其具体实现,该方法有广泛的适用性。

线性电位器的非线性传递函数分析

在线性电位器的电路设计中、电路前后级的输出和输入阻抗的影响以及使用与安装不当都可能引入非线性,造成电路和控制系统的精度达不到要求。为此,针对电位器的调节输出电压、限定调节范围、负载等效阻抗、细调等几种典型电路中的传递函数与非线性响应,通过实验给出了线性和非线性输出响应曲线。阐述了实际应用中如何避免和减少非线性的影响。