Fabrication, densification, and replica molding of 3D carbon nanotube microstructures

The introduction of new materials and processes to microfabrication has, in large part, enabled many important advances in microsystems, labon- a-chip devices, and their applications. In particular, capabilities for cost-effective fabrication of polymer microstructures were transformed by the advent of soft lithography and other micromolding techniques 1,2, and this led a revolution in applications of microfabrication to biomedical engineering and biology. Nevertheless, it remains challenging to fabricate microstructures with well-defined nanoscale surface textures, and to fabricate arbitrary 3D shapes at the micro-scale. Robustness of master molds and maintenance of shape integrity is especially important to achieve high fidelity replication of complex structures and preserving their nanoscale surface texture. The combination of hierarchical textures, and heterogeneous shapes, is a profound challenge to existing microfabrication methods that largely rely upon top-down etching using fixed mask templates. On the other hand, the bottom-up synthesis of nanostructures such as nanotubes and nanowires can offer new capabilities to microfabrication, in particular by taking advantage of the collective self-organization of nanostructures, and local control of their growth behavior with respect to microfabricated patterns. Our goal is to introduce vertically aligned carbon nanotubes (CNTs), which we refer to as CNT "forests", as a new microfabrication material. We present details of a suite of related methods recently developed by our group: fabrication of CNT forest microstructures by thermal CVD from lithographically patterned catalyst thin films; self-directed elastocapillary densification of CNT microstructures; and replica molding of polymer microstructures using CNT composite master molds. In particular, our work shows that self-directed capillary densification ("capillary forming"), which is performed by condensation of a solvent onto the substrate with CNT microstructures, significantly increases the packing density of CNTs. This process enables directed transformation of vertical CNT microstructures into straight, inclined, and twisted shapes, which have robust mechanical properties exceeding those of typical microfabrication polymers. This in turn enables formation of nanocomposite CNT master molds by capillary-driven infiltration of polymers. The replica structures exhibit the anisotropic nanoscale texture of the aligned CNTs, and can have walls with sub-micron thickness and aspect ratios exceeding 50:1. Integration of CNT microstructures in fabrication offers further opportunity to exploit the electrical and thermal properties of CNTs, and diverse capabilities for chemical and biochemical functionalization 3. © 2012 Journal of Visualized Experiments.

Characterization of the surface acoustic wave devices based on ZnO/nanocrystalline diamond structures

Nanocrystalline ZnO films with strong (0002) texture and fine grains were deposited onto ultra-nanocrystalline diamond (UNCD) layers on silicon using high target utilization sputtering technology. The unique characteristic of this sputtering technique allows room temperature growth of smooth ZnO films with a low roughness and low stress at high growth rates. Surface acoustic wave (SAW) devices were fabricated on ZnO/UNCD structure and exhibited good transmission signals with a low insertion loss and a strong side-lobe suppression for the Rayleigh mode SAW. Based on the optimization of the layered structure of the SAW device, a good performance with a coupling coefficient of 5.2% has been realized, promising for improving the microfluidic efficiency in droplet transportation comparing with that of the ZnO/Si SAW device. An optimized temperature coefficient of frequency of -23.4 ppm°C-1 was obtained for the SAW devices with the 2.72 μm-thick ZnO and 1.1 μm-thick UNCD film. Significant thermal effect due to the acoustic heating has been redcued which is related to the temperature stability of the ZnO/UNCD SAW device. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Modeling the carbon nanofiber addressed liquid crystal microlens array from experimentally observed optical phenomena

This paper presents a novel method of using experimentally observed optical phenomena to reverse-engineer a model of the carbon nanofiber-addressed liquid crystal microlens array (C-MLA) using Zemax. It presents the first images of the optical profile for the C-MLA along the optic axis. The first working optical models of the C-MLA have been developed by matching the simulation results to the experimental results. This approach bypasses the need to know the exact carbon nanofiber-liquid crystal interaction and can be easily adapted to other systems where the nature of an optical device is unknown. Results show that the C-MLA behaves like a simple lensing system at 0.060-0.276 V/μm. In this lensing mode the C-MLA is successfully modeled as a reflective convex lens array intersecting with a flat reflective plane. The C-MLA at these field strengths exhibits characteristics of mostly spherical or low order aspheric arrays, with some aspects of high power aspherics. It also exhibits properties associated with varying lens apertures and strengths, which concur with previously theorized models based on E-field patterns. This work uniquely provides evidence demonstrating an apparent "rippling" of the liquid crystal texture at low field strengths, which were successfully reproduced using rippled Gaussian-like lens profiles. © 2014 Published by Elsevier B.V.

Surface texturing through cylinder buckling

We consider the axial buckling of a thin-walled cylinder fitted onto a mandrel core with a prescribed annular gap. The buckling pattern develops fully and uniformly to yield a surface texture of regular diamond-shaped buckles, which we propose for novel morphing structures. We describe experiments that operate well into the postbuckling regime, where a classical analysis does not apply; we show that the size of buckles depends on the cylinder radius and the gap width, but not on its thickness, and we formulate simple relationships from kinematics alone for estimating the buckle proportions during loading. © 2014 by ASME.

Dense active appearance models using a bounded diameter minimum spanning tree

We present a method for producing dense Active Appearance Models (AAMs), suitable for video-realistic synthesis. To this end we estimate a joint alignment of all training images using a set of pairwise registrations and ensure that these pairwise registrations are only calculated between similar images. This is achieved by defining a graph on the image set whose edge weights correspond to registration errors and computing a bounded diameter minimum spanning tree (BDMST). Dense optical flow is used to compute pairwise registration and we introduce a flow refinement method to align small scale texture. Once registration between training images has been established we propose a method to add vertices to the AAM in a way that minimises error between the observed flow fields and a flow field interpolated between the AAM mesh points. We demonstrate a significant improvement in model compactness using the proposed method and show it dealing with cases that are problematic for current state-of-the-art approaches.

Microfabries of lacustrine sediments to pollutant adsorption from a polluted Eutrophic lake, the Yangtze delta region

Two types of microfabrics relating to pollutant adsorption were studied in the scanning electronic microscope (SEM) in a polluted, eutrophic lake, the Yangtze delta region. Agglutinational texture or the aggregates of small particles are composed of clay minerals and fine organic fragments among the silty grains and the coatings with a thickness about 1 mu m were on the surfaces of the silty grains in the sediments. The chemical constituents of the aggregates and the coatings are K, Na, Ca, Mg, Si, Al, O, Fe, Ti, C, N and P determined in X-ray energy spectrometry connected with the SEM. In some cases, Pb was detected in the aggregates in the top sediment. It is suggested that nutrients and metals are adsorbed to the aggregates, which were formed by electrostatic attraction of physicochemical floes. The coatings on the surface of quartz grains were formed by the interaction of dissociated Al, Si, Fe, etc from silicates with dissolved N, P and C nutrients in interstitial water, which was aroused by human pollution to the lake in recent two decades.

Effective recombination velocity of textured surfaces

Surface texturization is an effective way to enhance the absorption of light for optoelectronic devices but it also aggravates the surface recombination by enlarging the surface area. In order to evaluate the influence of texture structures on the surface recombination, an effective surface recombination velocity is defined which is assumed to have an equivalent recombination effect on a flat surface. Based on numerical and analytical calculation, the dependences of effective surface recombination on the pattern geometry, the surface recombination velocity, and the diffusion length are analyzed.

Doped polycrystalline 3C-SiC films deposited by LPCVD for radio-frequency MEMS applications

Polycrystalline 3C-SiC films are deposited on SiO2 coated Si substrates by low pressure chemical vapour deposition (LPCVD) with C3H8 and SiH4 as precursors. Controlled nitrogen doping is performed by adding NH3 during SiC growth to obtain the low resistivity 3C-SiC films. X-ray diffraction (XRD) patterns indicate that the deposited films are highly textured (111) orientation. The surface morphology and roughness are determined by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The surface features are spherulitic texture with average grain size of 100 nm, and the rms roughness is 20nm (AFM 5 x 5 mu m images). Polycrystalline 3C-SiC films with highly orientational texture and good surface morphology deposited on SiO2 coated Si substrates could be used to fabricate rf microelectromechanical systems (MEMS) devices such as SiC based filters.

Influence of the rapid thermal annealing on the properties of thin a-Si films

The variation of the structure, morphology and the electrical properties of thin amorphous silicon films caused by Rapid Thermal Annealing is studied. The films annealed at 1200degreesC for 2 minutes change their structure to polycrystalline and as a result their resistivity decreases by 4 orders of magnitude. Due to the small thickness of the as deposited amorphous silicon the obtained poly-Si is strongly irregular and has many discontinuities in its texture.

SiO2/Ta interface reaction in magnetic multilayers and its influence on Ta buffer layers

Ta is often used as a buffer layer in magnetic multilayers. In this study, Ta/Ni81Fe19/Ta multilayers were deposited by magnetron sputtering on sing-crystal Si with a 300-nm-thick SiO2 film. The composition and chemical states at the interface region of SiO2/Ta were studied using the X-ray photoelectron spectroscopy (XPS) and peak decomposition technique. The results show that there is an 'inter-mixing layer" at the SiO2/Ta interface due to a thermodynamically favorable reaction: 15 SiO2 + 37 Ta = 6 Ta2O5 + 5 Ta5Si3. Therefore, the Ta buffer layer thickness used to induce NiFe (111) texture increases.

基于Gabor小波的着色及纹理合成算法

着色和纹理合成是图形图像中的两类基本研究课题。前者需根据用户定义的彩色笔触信息，自动对黑白照片、电影或者漫画染上颜色；后者则需根据用户输入的样本纹理，经计算得出与样本纹理视觉上近似的结果纹理。这两类课题都有广泛的应用背景。如着色常常用于给经典的黑白电影或者照片自动上色，解决现在的染色工序中存在的需要大量人工交互的难题；而纹理合成常用于电影和电子游戏的地形地貌、织物、头发等等纹理的自动生成。 这两大类问题都需要分析纹理特征，并且依赖于分析结果的准确性。Gabor小波滤波器与人眼的视觉感受野相当吻合，用它来分析纹理得到的结果比较精确。鉴于此，本文把Gabor小波应用到了着色问题和纹理合成中。对于着色问题，本文用基于Gabor小波的特征向量重新定义邻居关系，然后用最优化方法迭代地对照片和卡通染色。相比以往的算法，本算法具有用户交互少、效果好、算法简单稳健的优点，并且算法允许用户逐步地添加色彩细节。对于纹理合成，本文用基于Gabor小波的特征向量来预计算K-Coherence候选集，提高了K-Coherence算法的准确性，从而改进了纹理合成的最终效果。 本文提出的算法是天然并行的，因而可利用GPU加速，做到实时计算。

砂粒含量对土壤水分蓄持能力影响模拟试验研究

通过人工配制不同质地土壤,测定土壤水分特征曲线,研究了土壤中砂粒含量对其水分蓄持能力的定量影响。结果表明:(1)砂粒含量对土壤水分蓄持能力有较大影响,土壤持水能力随砂粒含量增加递减,表征土壤持水能力的水分特征曲线Gardner模型参数及表征土壤饱和含水量的Van Genuchten模型参数均随砂粒含量增加逐渐减小。(2)砂粒含量对土壤比水容量有较大影响,试验土壤在任一吸力水平下的比水容量值均随其砂粒含量增加递减。(3)试验土壤饱和含水量与砂粒含量呈线性关系,田间持水量、凋萎系数与砂粒含量都呈开口向下抛物线右半段的关系。(4)试验土壤有效水、迟效水含量随砂粒含量增加递减,二者与砂粒含量均呈开口向下抛物线右半段的关系。易效水含量与砂粒含量呈开口向上抛物线关系。

黄土高原坡地密植枣园土壤质地与肥力状况分析

采用田间取样与实验室分析相结合的方法,研究了黄土高原坡地密植枣园土壤质地与肥力状况。结果表明,坡地枣园土壤肥力低,氮、磷严重缺乏,钾相对丰富,土壤属于砂壤土,通气性强,保肥、保水性差。0~60 cm土壤有机质含量为1.687~5.002 mg/kg;全氮为0.072~0.316 g/kg;硝酸盐为2.325~16.846 g/kg;铵态氮为1.187~2.146 g/kg,速效磷为0.270~2.480 mg/kg,速效钾为51.9~169.1 mg/kg,并且含量均随剖面向下减少。颗粒组成大部分为粉砂粒,含量一般在65.75%~68.98%;随有机质含量升高,0.25~0.05 mm微团聚体数量呈上升趋势,二者为正相关;<0.05 mm微团聚体含量则逐渐下降,二者呈负相关。黄土高原坡地密植枣园土壤肥力总体水平很低。除了速效钾为中等级外,有机质、全氮、碱解氮、速效磷均为很低等级。

黏粒质量分数对土壤水分蓄持能力影响的模拟试验

通过人工配制不同质地土壤,测定土壤水分特征参数,研究土壤中黏粒质量分数对其水分蓄持能力的定量影响。结果表明:1)黏粒质量分数对土壤水分蓄持能力有较大影响,土壤持水能力随黏粒质量分数增加而递增。2个水分特征曲线模型——Gardner模型及van Genuchten模型中,表征土壤持水能力的参数均随黏粒质量分数增加而增大。2)黏粒质量分数对土壤比水容量有较大影响,试验土壤在任一水吸力水平下的比水容量值均随其黏粒质量分数增大而增大。3)试验土壤饱和含水量、田间持水量分别与黏粒质量分数呈指数、对数正相关,凋萎系数与黏粒质量分数呈指数正相关。4)试验土壤有效水、迟效水含量随黏粒质量分数增加呈先升高后降低趋势,二者与黏粒质量分数均呈抛物线关系,最高点分别出现在黏粒质量分数为35.9%和35.8%处,易效水含量与黏粒质量分数相关性不显著。研究结果可为黄土区土壤水分蓄持机制进一步研究提供一定理论依据。