Advanced polymeric materials for applications in technical equipment for snow sports

The thesis is divided in three chapters, each one covering one topic. Initially, the thermo-mechanical and impact properties of materials used for back protectors have been analysed. Dynamical mechanical analysis (DMTA) has shown that materials used for soft-shell protectors present frequency-sensitive properties. Furthermore, through impact tests, the shock absorbing characteristics of the materials have been investigated proving the differences between soft and hard-shell protectors; moreover it has been demonstrated that the materials used for soft-shell protectors maintain their protective properties after multi-impacts. The second chapter covers the effect of the visco-elastic properties of the thermoplastic polymers on the flexural and rebound behaviours of ski boots. DMTA analysis on the materials and flexural and rebound testing on the boots have been performed. A comparison of the results highlighted a correlation between the visco-elastic properties and the flexural and rebound behaviour of ski boots. The same experimental methods have been used to investigate the influence of the design on the flexural and rebound behaviours. Finally in the third chapter the thermoplastic materials employed for the construction of ski boots soles have been characterized in terms of chemical composition, hardness, crystallinity, surface roughness and coefficient of friction (COF). The results showed a relation between material hardness and grip, in particular softer materials provide more grip with respect to harder materials. On the contrary, the surface roughness has a negative effect on friction because of the decrease in contact area. The measure of grip on inclined wet surfaces showed again a relation between hardness and grip. The performance ranking of the different materials has been the same for the COF and for the slip angle tests, indicating that COF can be used as a parameter for the choice of the optimal material to be used for the soles of ski boots.

Tradurre per le imprese. Analisi e traduzione in inglese della Nota integrativa al Bilancio consolidato 2013 di MNLG S.r.l.-Holding Sorma Group

The aim of this dissertation is to provide a translation in English of the Notes on the Consolidated Financial Statements of MNLG S.r.l., holding company of the Italian Sorma Group. This translation work is one example of the technical material produced in accordance with the project called Language Toolkit, set up by the Chamber of Commerce of Forlì-Cesena, to support the internationalization of the companies established in the territory. This initiative has represented a unique opportunity for me to put into practice the knowledge and abilities learnt in the translation field during these years at university. It also allowed me to give a concrete purpose to my dissertation, that is to provide a technical document translated into a foreign language. By making its Consolidated Financial Statement readily available in English, the company MNLG S.r.l. can in fact increase the number of possible investors and guarantee a more transparent financial informative to its shareholders. This translation work is divided into six chapters: the first one describes the project, its main objectives and the ways in which it was developed. The second chapter deals with the notions of Consolidated Financial Statements and presents the accounting documents of which the Financial Statements are made up as well as the norms according to which they are prepared. The third chapter, instead, focuses on the translation procedure applied and especially on the documentation process, analysing the differences between the International Accounting Standards and the accounting standards used in Italy. The fourth chapter provides a description of the translation resources built for the translation of this specific document. The fifth chapter includes the English version of the Notes on the Consolidated Financial Statements and, to conclude, the sixth chapter analyses the difficulties encountered in translating and the strategies adopted to overcome them.

In situ pinning with arthroscopic osteoplasty for mild SCFE: A preliminary technical report

There is emerging evidence that even mild slipped capital femoral epiphysis leads to early articular damage. Therefore, we have begun treating patients with mild slips and signs of impingement with in situ pinning and immediate arthroscopic osteoplasty. DESCRIPTION OF TECHNIQUES: Surgery was performed using the fracture table. After in situ pinning and diagnostic arthroscopy, peripheral compartment access was obtained and head-neck osteoplasty was completed.

Soft-Tissue Simulation for Cranio-Maxillofacial Surgery: Clinical Needs and Technical Aspects

Computerized soft-tissue simulation can provide unprecedented means for predicting facial outlook pre-operatively. Surgeons can virtually perform several surgical plans to have the best surgical results for their patients while considering corresponding soft-tissue outcome. It could be used as an interactive communication tool with their patients as well. There has been comprehensive amount of works for simulating soft-tissue for cranio-maxillofacial surgery. Although some of them have been realized as commercial products, none of them has been fully integrated into clinical practice due to the lack of accuracy and excessive amount of processing time. In this chapter, state-of-the-art and general workflow in facial soft-tissue simulation will be presented, along with an example of patient-specific facial soft-tissue simulation method.

Immediate Search in the IDE as an Example of Socio-Technical Congruence in Search-Driven Development

Search-driven development is mainly concerned with code reuse but also with code navigation and debugging. In this essay we look at search-driven navigation in the IDE. We consider Smalltalk-80 as an example of a programming system with search-driven navigation capabilities and explore its human factors. We present how immediate search results lead to a user experience of code browsing rather than one of waiting for and clicking through search results. We explore the socio-technical congruence of immediate search, ie unification of tasks and breakpoints with method calls, which leads to simpler and more extensible development tools. Eventually we conclude with remarks on the socio-technical congruence of search-driven development.

Body CT: technical advances for improving safety

OBJECTIVE: In this review, we attempt to address many of the issues that are related to ensuring patient benefit in body CT, balancing the use of ionizing radiation and iodinated contrast media. We attempt to not only summarize the literature but also make recommendations relevant to CT protocols, including the technical parameters of both the scanner and the associated contrast media. CONCLUSION: Although CT is a powerful tool that has transformed the practice of medicine, the benefits are accompanied by important risks. Radiologists must understand these risks and the strategies available to minimize them as well as the risks associated with contrast medium delivery in abdominal CT.

Technical Feasibility and Application of Mechanical Thrombectomy with the Solitaire FR Revascularization Device in Acute Basilar Artery Occlusion

Acute BAO is a devastating neurological condition associated with a poor clinical outcome and a high mortality rate. Recanalization has been identified as a major prognostic factor for good outcome in BAO. Mechanical thrombectomy using retrievable stents is an emerging treatment option for acute stroke. First clinical trials using stent retrievers have shown promising high recanalization rates. However, these studies mainly included large artery occlusions in the anterior circulation with only a few or single cases of BAO. Therefore, the purpose of this study was to evaluate technical feasibility, safety, and efficacy of mechanical thrombectomy using retrievable stent in the treatment of acute BAO.

Systematic review of the survival rate and the incidence of biological, technical, and aesthetic complications of single crowns on implants reported in longitudinal studies with a mean follow-up of 5 years

To assess the 5-year survival of implant-supported single crowns (SCs) and to describe the incidence of biological, technical, and aesthetic complications. The focused question was: What is the survival rate of implants supporting single crowns and implant-supported crowns with a mean follow-up of 5 years and to which extent do biological, technical, and aesthetic complications occur?