Construção de instrumentos técnicos de astronomia para a divulgação científica: telescópio fotométrico de grande abertura e baixo custo

Although the popularization of astronomy in the last decade and the International Year of Astronomy, celebrated in 2009, there's a great lack in respect of quality instruments for astronomical disclosure. Thinking in this research about it, we intend to recuperate and elucidate a technique long forgotten: the metal mirror amateur telescope, once was done in the first reflecting telescopes. However, with the resources available today and given the high purity of the materials, our results were better than that obtained by the pioneers. We developed and built a large aperture telescope (250 mm diameter) and very bright (focal ratio = 4.0), versatile and portable. In our study was described step by step the process to fabricate the telescope. Through its first images captured of the Moon, we can illustrate its versatility both for use in outreach events and for use in amateur astronomy, because it is a primary focus capture system and can run registration of various astronomical events

Desenvolvimento de um durômetro portátil para madeiras com o uso de transdutor de deslocamento

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Desenvolvimento de um sistema de SHM sem fio e com compensação automática de temperatura

Pós-graduação em Engenharia Elétrica - FEIS

Evaluation of the vitality of nelore calves born of normal or dystocic parturitions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Quimiluminescência como fonte de luz alternativa na terapia fotodinâmica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Determinação simultânea de biomarcadores de função renal em urina utilizando dispositivo analítico microfluídico em papel

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação sazonal de alguns parâmetros indicadores da qualidade de água no reservatório da usina hidrelétrica de Ilha Solteira-SP, Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Televisão digital móvel e portátil

The digital television system adopted by Brazil allows the signal reception of broadcast TV on mobile devices and laptops. This paper aims to analyze issues related to the transmission of free and open TV signals for reception in portable and mobile devices enabled by 1SEG system. We will evaluate the behavior of the user, tv schedule, prime time and experiences in Japan.

Sinais de vibração no monitoramento do processo de retificação plana de cerâmicas avançadas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Sinais digitais de um durômetro portátil para a estimativa de propriedades de madeiras para dormentes

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Avaliação de danos no material genético em anestesiologistas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Custo energético durante a prática do Kendō e proposição de protocolo específico para avaliação da aptidão aeróbia em praticantes

Pós-graduação em Desenvolvimento Humano e Tecnologias - IBRC

Desenvolvimento de conjunto membrana-eletrodos para célula a combustível de metanol direto passiva

Direct methanol fuel cells (DMFCs) without external pumps or other ancillary devices for fuel and oxidant supply are known as passive DMFCs and are potential candidates to replace lithium-ion batteries in powering portable electronic devices. This paper presents the results obtained from a membrane electrode assembly (MEA) specifically designed for passive DMFCs. Appropriated electrocatalysts were prepared and the effect of their loadings was investigated. Two types of gas diffusion layers (GDL) were also tested. The influence of the methanol concentration was analyzed in each case. The best MEA performance presented a maximum power density of 11.94 mW cm^-2.

Characterization of atmospheric aerosols in the city of So Paulo, Brazil: comparisons between polluted and unpolluted periods

The objective of this study was to determine the size and composition of atmospheric aerosols in the downtown area of the city of So Paulo, Brazil, for a polluted and an unpolluted period. Aerosols were sampled with a portable air sampler (PAS), Micro-Orifice Uniform Deposit Impactor (MOUDI), and Scanning Mobility Particle Sizer. At the study site, air quality is poor, especially during the winter, high concentrations of pollutants being emitted primarily by the light- and heavy-duty vehicle fleet. We analyzed mass, black carbon (BC), Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Rb, Sn, Zr, and Pb. During the polluted period, diurnal PM(10) was higher than nocturnal PM(10), whereas the inverse was true during the unpolluted period. The FPM was rich in BC, S, and Pb, whereas CPM was rich in Al, Si, Ca, Ti, and Fe. Mass balance was performed by category: ammonium sulfate, sodium chloride, crustal material, BC, and other. The PAS-determined FPM was mainly BC. The MOUDI-determined FPM crustal material explained more mass than did ammonium sulfate and BC during the polluted period, whereas ammonium sulfate had the largest mass during the unpolluted period. Crustal material was the major CPM component, followed by ammonium sulfate and BC. During the unpolluted period, FPM concentrations were lower, whereas those of ammonium sulfate were relatively higher, especially at night, and particle number was inversely proportional to particle size. Aerosol growth was more intense during the polluted period.

Quantitative assessment of the intensity of palmar and plantar sweating in patients with primary palmoplantar hyperhidrosis

Objective: To compare individuals with and without hyperhidrosis in terms of the intensity of palmar and plantar sweating. Methods: We selected 50 patients clinically diagnosed with palmoplantar hyperhidrosis and 25 normal individuals as controls. We quantified sweating using a portable noninvasive electronic device that has relative humidity and temperature sensors to measure transepidermal water loss. All of the individuals had a body mass index of 20-25 kg/cm(2). Subjects remained at rest for 20-30 min before the measurements in order to reduce external interference. The measurements were carried out in a climate-controlled environment (21-24 degrees C). Measurements were carried out on the hypothenar region on both hands and on the medial plantar region on both feet. Results: In the palmoplantar hyperhidrosis group, the mean transepidermal water loss on the hands and feet was 133.6 +/- 51.0 g/m(2)/h and 71.8 +/- 40.3 g/m(2)/h, respectively, compared with 37.9 +/- 18.4 g/m(2)/h and 27.6 +/- 14.3 g/m(2)/h, respectively, in the control group. The differences between the groups were statistically significant (p < 0.001 for hands and feet). Conclusions: This method proved to be an accurate and reliable tool to quantify palmar and plantar sweating when performed by a trained and qualified professional.