Computer simulations of sample preconcentration in carrier-free systems and isoelectric focusing in microchannels using simple ampholytes.

In this work, electrophoretic preconcentration of protein and peptide samples in microchannels was studied theoretically using the 1D dynamic simulator GENTRANS, and experimentally combined with MS. In all configurations studied, the sample was uniformly distributed throughout the channel before power application, and driving electrodes were used as microchannel ends. In the first part, previously obtained experimental results from carrier-free systems are compared to simulation results, and the effects of atmospheric carbon dioxide and impurities in the sample solution are examined. Simulation provided insight into the dynamics of the transport of all components under the applied electric field and revealed the formation of a pure water zone in the channel center. In the second part, the use of an IEF procedure with simple well defined amphoteric carrier components, i.e. amino acids, for concentration and fractionation of peptides was investigated. By performing simulations a qualitative description of the analyte behavior in this system was obtained. Neurotensin and [Glu1]-Fibrinopeptide B were separated by IEF in microchannels featuring a liquid lid for simple sample handling and placement of the driving electrodes. Component distributions in the channel were detected using MALDI- and nano-ESI-MS and data were in agreement with those obtained by simulation. Dynamic simulations are demonstrated to represent an effective tool to investigate the electrophoretic behavior of all components in the microchannel.

Atypical variants of bovine spongiform encephalopathy: rare diseases with consequences for BSE surveillance and control

Occurring for the first time in 1986 in the United Kingdom, bovine spongiform encephalopathy (BSE), the so-called “mad-cow disease”, has had unprecedented consequences in veterinary public health. The implementation of drastic measures, including the ban of meat-and-bone-meal from livestock feed and the removal of specified risk materials from the food chain has eventually resulted in a significant decline of the epidemic. The disease was long thought to be caused by a single agent, but since the introduction of immunochemical diagnostic techniques, evidence of a phenotypic variation of BSE has emerged. Reviewing the literature available on the subject, this paper briefly summarizes the current knowledge about these atypical forms of BSE and discusses the consequences of their occurrence for disease control measures.

Rotations, Precursor to Rotational Spectroscopy, and Group Theory

Rotations are an integral part of the study of rotational spectroscopy, as well as a part of group theory, hence this introduction.

Corporate decision-making: A case study of decision support systems and financial performance in health care organizations

The purpose of this study was twofold: (1) To describe the relation of the intensity of DSS implementation to financial performance as an empirical exploration of improved performance at the organizational level. (2) To describe the relation of the intensity of DSS implementation to the type of organizational decision culture. A multiple case study design was utilized to compare three groups of paired cases. A pattern matching strategy was applied in this study. Four predictions were specified and compared to the empirical data. A progressively upward trend in the scores was predicted for the following theoretical relationships. (1) The greater the number of DSSs, the higher the sophistication index. (2) The greater the number of DSSs, the higher the financial ratios. (3) The greater the number of DSSs, the higher the culture score. (4) The higher the culture score, the higher the financial ratios. The data did not support any of the predicted trends except the relation between the number of DSSs and the financial ratios. The Income/Revenue ratio indicates the efficiency of a company's operations. One would expect that this ratio would be most affected by the operational and financial decision support systems. The majority of the systems measured in the study supported decisions tangential to the patient service areas. The evidence suggested that the type and number of decision support systems affects the bottom line. ^

A study of the relationship of support systems and adolescent pregnancy outcomes in an adolescent family life project

This study analyzed the relationship of family support systems and adolescent pregnancy outcomes. The population for the study was 390 adolescents who had attended the Marion County Health Department Adolescent Family Life Project in Indianapolis, Indiana during a two-year period.^ The study is unique in that it afforded the opportunity to compare adolescent pregnancy-related characteristics, of white and non-white adolescents in the same study.^ The pregnancy outcomes studied were: Infant birthweight, school attendance, and pregnancy recidivism.^ Significant results were found in the analysis that supported other research in regard to factors that are associated with school attendance when family support, adolescent's age, and ethnicity were controlled. Infant birthweight and repeat pregnancy outcome relationships were not found to have any consistently significant relationship with independent variables anticipated to be associated. However, the comparisons of infant birthweight among the adolescents with, and without, family support, by ethnicity resulted in some interesting findings. Repeat pregnancy proved an enigma, in that there seemed to be almost no variables in this study that were associated with the adolescent having a repeat pregnancy.^ Familial support in this study seemed to be of less importance as a factor in adolescent pregnancy outcomes than was ethnicity. The non-white adolescents in this study had a better record for remaining in school, both those non-white adolescents who lived with parents, and those who did not live with parents. More low birthweight occurred in the non-white adolescent, both those adolescents who lived with parents, and those who did not live with parents. Repeat pregnancy occurred more in the non-white adolescent whether she lived with parents, or did not live with parents. ^

(Table 1) Species richness and diversity of tundra plants in herbivore exclosure and control plots near Barrow, Alaska

To determine the role lemmings play in structuring plant communities and their contribution to the 'greening of the Arctic', we measured plant cover and biomass in 50 + year old lemming exclosures and control plots in the coastal tundra near Barrow, Alaska. The response of plant functional types to herbivore exclusion varied among land cover types. In general, the abundance of lichens and bryophytes increased with the exclusion of lemmings, whereas graminoids decreased, although the magnitude of these responses varied among land cover types. These results suggest that sustained lemming activity promotes a higher biomass of vascular plant functional types than would be expected without their presence and highlights the importance of considering herbivory when interpreting patterns of greening in the Arctic. In light of the rapid environmental change ongoing in the Arctic and the potential regional to global implications of this change, further exploration regarding the long-term influence of arvicoline rodents on ecosystem function (e.g. carbon and energy balance) should be considered a research priority.

Calcareous nannofossil datums and control points for the TCMS age model of ODP Site 175-1085

An astronomically calibrated age model for the Pliocene section of Ocean Drilling Program Leg 175 Cape Basin Site 1085 based on magnetic susceptibility data was developed using shipboard biostratigraphic datums. The composite core magnetic susceptibility record was compiled using shipboard correlations between Holes 1085A and 1085B and then tuned to the record of orbital variations in eccentricity to generate an orbitally tuned age model. Magnetic susceptibility apparently records climate variations in the Cape Basin. Strong power spectra values at the 100- and 400-k.y. frequency suggest an orbital control on the beat of Pliocene climate change in the Cape Basin.

Online Reputation Systems and Cumulative Advantage

The study of online reputation systems and their importance for promoting trust and cooperation and, therefore, the smooth functioning of online markets has received considerable attention over the last few years. In the first part of our talk we will try to give a brief overview of the existing theoretical and empirical work in this field, summarize the main findings from this research and identify open questions where results are either controversial or do not yet exist. The second part of our talk will focus on one of these issues that deserve further research, namely the relation between online reputation systems and processes of "cumulative advantage." Cumulative advantage is the mechanism where a favorable relative position of having a good reputation becomes a resource for further relative gains. The process leads to increased status inequality and a heavily skewed distribution of number of feedbacks, i.e. the ties in the reputation network. We present empirical evidence for direct and indirect reputation effects on the micro level of an auction reputation system and discuss the distributional consequences for the market level.

Sistemas de control de roturas en presas y caracterización de sistemas hidráulicos

Este proyecto nace de la necesidad de automatizar el estudio de sistemas hidráulicos y de control de roturas en presas. Para realizar el estudio de sistemas hidráulicos se usarán un número indeterminado de sensores de nivel, presión y caudal. El número de sensores que se pueden utilizar viene determinado por el material disponible. Estos sensores se conectarán a unas tarjetas de National Instruments modelo NI 9208 y éstas a su vez a un chasis modelo CompactDAQ NI-9174 con cuatro ranuras. Conectando este chasis al ordenador podremos obtener los datos provenientes de los sensores. También se podrá controlar una válvula para determinar la cantidad de agua que fluye en nuestro experimento. Está válvula está conectada a una tarjeta NI-9264 que se conectará al chasis en su última posición Para detectar y estudiar posibles roturas en presas se dispone de un motor y un láser con los cuales se puede barrer la superficie de una presa y obtener una imagen en tres dimensiones de la misma procesando los datos provenientes del laser. Para recoger los datos de los sensores y controlar una válvula se ha desarrollado una aplicación utilizando LabVIEW, un programa creado por National Instruments. Para poder controlar el motor y el láser se parte de una aplicación que ya estaba realizada en LabVIEW. El objetivo ha sido detectar y corregir una serie de errores en la misma. Dentro del proyecto, además de la explicación detallada de la aplicación para los sensores y la válvula, y las pruebas realizadas para detectar y corregir los errores de la aplicación del láser y el motor, existe: una breve introducción a la programación en LabVIEW, la descripción de los pasos realizados para el conexionado de los sensores con las tarjetas, los manuales de usuario de las aplicaciones y la descripción de los equipos utilizados. This project stars from the need to automate the study of hydraulic systems and control dam breaks. For the study of hydraulic systems it will be used an unspecified number of level, pressure and flow sensors. The number of sensors that can be used is determined by the available material. These sensors are connected to a NI 9208 National Instruments target and these cards to a NI-9174 CompactDAQ chassis with four slots. Connecting the chassis to a computer we will obtain data from the sensors. We also can control a valve to determine the amount of water flowing in our experiment. This valve is connected to a NI-9264 card and this card to the last position of the chassis. To detect and study dams breakage it used a motor and a laser. With these two devices we can scan the surface of a dam and obtain a three-dimensional image processing data from the laser. To collect data from the sensors and control the valve it has developed an application using LabVIEW, a program created by National Instruments. To control the motor and the laser it is used an application that was already created using LabVIEW. The aim of this part has been detect and correct a number of errors in this application. Within the project, in addition to the detailed explanation of the application for sensors and valve, and tests to detect and correct errors in the application of lasers and the motor, there is: a brief introduction to programming in LabVIEW, the description of the steps taken for connecting the sensors with cards, user manuals and application description of the equipment used.

A generic persistence model for CLP systems (and two useful implementations)

This paper describes a model of persistence in (C)LP languages and two different and practically very useful ways to implement this model in current systems. The fundamental idea is that persistence is a characteristic of certain dynamic predicates (Le., those which encapsulate state). The main effect of declaring a predicate persistent is that the dynamic changes made to such predicates persist from one execution to the next one. After proposing a syntax for declaring persistent predicates, a simple, file-based implementation of the concept is presented and some examples shown. An additional implementation is presented which stores persistent predicates in an external datábase. The abstraction of the concept of persistence from its implementation allows developing applications which can store their persistent predicates alternatively in files or databases with only a few simple changes to a declaration stating the location and modality used for persistent storage. The paper presents the model, the implementation approach in both the cases of using files and relational databases, a number of optimizations of the process (using information obtained from static global analysis and goal clustering), and performance results from an implementation of these ideas.