Human activities and interests within and around lakes of the Victoria and Kyoga basin and their consequences to sustainable fish production

Of all the great lakes, Lake Victoria has the highest population concentration on its fringes. This has resulted into serious human impacts on the ecosystem through intense agricultural activities (cultivation, livestock and over fishing), sporadic settlements, urbanization and industrial establishments. The consequences have been loss of animals and plant life, deforestation and general land degradation, pollution, loss of water quality and clean air. Aquatic life has become endangered and less guaranteeing to continued fish production. Awareness workshops and general talks have been done to a few selected communities by the lakes landing sites and in the catchment area to mitigate the deteriorating environmental conditions. Naturally the situation calls for reversal to the increasing stress of the ecosystem. As a result, every water body surveyed put forward some mitigation suggestions

Fish species diversity in the Victoria and Kyoga lake basins: their conservation and sustainable use

Introduction of exotic fish species especially the Nile perch Lates niloticus, is believed to be responsible for the decline of fish species diversity in lakes Victoria, Kyoga and Nabugabo.About 60% of the haplochromine cichlids are thought to have become extinct from L. Victoria due to predation by the Nile perch. However there are many lakes satelite to the lakes Victoria and Kyoga basins which still have fish fauna similar to that of the main lakes. many of the satellite lakes are separated from the main lakes in, which Nile perch was introduced by extensive swamps that provide a barrier to Nile perch .A survey was carried out in a number of these satelite lakes and an inventory made of existing fish species. Their distribution and relative abundances were also determined. The lakes studied included Nawampasa, Nakuwa,Kawi Lamwa Gigate, Nyaguo, Agu, Nabugabo. Kayanja, Kaytigi, Mburo, Kachera and Wamala.Some habitats within the main lakes Victoria and Kyoga, especially those with rocky outcrops· and macrophyte cover that provide refugia for endangered species from Nile perch,were also surveyed) Various stations along the River Nile were also sampled to quantify the fish species that are still resent. Kyoga minor lakes were found to have the highest number of fish species especially of haplochromine cichlids. Many haplochromine trophic groups that were thought to be extinct from 1. Victoria still occur in these lakes.!Some of the satellite lakes, especially lakes Kayugi, Mburo and Kachera still contain .healili populations of oreochromis. I esculentus that could be used as brood stock in fish farming. Many of these lakes should .I ( I therefore be protected for conservation offish species diversity

The decline of Alestes baremose Boulenger, 1901 and Hydrocynus forskahlii (Cuvier, 1819) stocks in Lake Albert: implications for sustainable management of their fisheries

The fish stocks of Lake Albert face immense exploitation pressure which has led to “fishingdown” of their fisheries, with some larger species having been driven to near-extinction, while others such as Citharinus citharus have almost disappeared. Both A. baremose (Angara) and H. forskahlii (Ngassia) historically formed the most important commercial species in Lake Albert until the early 2000s but recent Catch Assessment Surveys (2007-2013) revealed a sweeping decline in their contribution to the commercial catch from 72.7% in 1971 to less than 6% in 2013. The catch per unit effort also registered a two-fold decline from 45.6 and 36.1 kg/boat/day to 22.6 and 18.1 kg/boat/day for A. baremose and H. forskahlii respective between 1971 and 2007. Over 50% of illegal gillnets, below the legal minimum limit of four inches (101.6 mm) used on Lake Albert target the two species. Gillnet experiments found the three inch (76.2 mm) gill net mesh size suitable for sustained harvest of the two species. The study concludes that optimal utilization of the two species and probably other non target fish species is achievable through species specific management strategies, coupling species specific licensing, and controlling harvest of juvenile individuals, overall fishing effort and fish catch on Lake Albert and protecting the vulnerable fish habitats.

Knowledge, perceptions, impacts and roles of lakeside communities and institutions in the sustainable control of water hyacinth

The massive water hyacinth mats that covered water bodies in the 1990s had serious social and economic impacts. They affected fishing, transportation, water quality and health of fishing communities as well as production of goods and services of lake-based institutions (commercial establishments). At peak infestations, the communities and institutions were aware of and participated readily in control effort. However, after the major collapse of hyacinth in 1998, some of them relaxed in their control efforts. The status of knowledge, perception, impacts, preparedness and role of the lakeside communities and institutions to control the weed has, therefore, been monitored since the major resurgence of the weed to find out if the lakeside communities and institutions still perceive water hyacinth as a problem and the extent to which they are prepared to sustain control.

A comparison of four sustainable manufacturing strategies

Effective use of materials is one possible component of a sustainable manufacturing strategy. There are many such strategies proposed in the literature and used in practice, with confusion over what they are, what the differences among them may be and how they can be used by practitioners in design and manufacture to improve the sustainability of their product and processes. This paper reviews the literature on sustainable manufacturing strategies that deliver improved material performance. Four primary strategies were found: waste minimisation; material efficiency; resource efficiency; and eco-efficiency. The literature was analysed to determine the key characteristics of these sustainable manufacturing strategies and 17 characteristics were found. The four strategies were then compared and contrasted against all the characteristics. While current literature often uses these strategy titles in a confusing, occasionally inter-changeable manner, this study attempts to create clear separation between them. Definition, scope and practicality of measurement are shown to be key characteristics that impact upon the ability of manufacturing companies to make effective use of the proposed strategy. It is observed that the most actionable strategies may not include all of the dimensions of interest to a manufacturer wishing to become more sustainable, creating a dilemma between ease of implementation and breadth of impact. © 2008 Taylor & Francis.

Industrialization as a key element of sustainable product-service solutions

Product-service systems are seen by many authors to offer potential for significant sustainability benefit. Manufacturing companies are said to be essential to such a change through their influence over product performance and over the use and end-of-life stages. Yet linking these stages such that the producer is incentivized to improve the performance of later stages is still a challenge. This paper argues for placing the producer at the centre of a new arrangement: by seeking to utilize the producer's knowledge of designing and the knowledge of volume production, through creation of platforms, while cooperating closely with other actors. The paper describes three case studies that have used such an approach to design and implement new food production systems. Based on 12 months of action research observations, 10 participating organizations from the cases were studied, and the implemented solutions assessed for environmental, economic and social performance. The results demonstrate a high level of sustainability benefit is achievable using platforms and partners to design product-service systems, while highlighting that changes to production arrangements are necessary but not sufficient to improve whole life-cycle environmental performance of product-service systems, and that producers need to cooperate closely with other actors to achieve the claimed benefits.

Building more sustainable solutions in production-consumption systems: the case of food for people with reduced access

In new product development, the ability to integrate different dimensions of sustainability at a value chain level is still a complex, problematic goal. As product-service approaches are increasingly enabling the introduction of more sustainable paths, this paper describes the authors' experience thus far when building insights into conditions for the implementation of integrated solutions in a process of co-development and testing in real life conditions, which are driven by a social need focusing on food for people with reduced access. Throughout this process, which brought together producers, consumers and other stakeholders to design and test industrialised, sustainable solutions, empirical evidence demonstrates feasibility and usefulness of the approach and insight into the conditions for implementing interactive, comprehensive multi-stakeholder processes in real life situations. In addition, results show that the delivery of innovative solutions enabled to offer social added value, economic profits and environmental improvements under specific experimental conditions. © 2006 Elsevier Ltd. All rights reserved.

Discussion: Widening engineering horizons: Addressing the complexity of sustainable development

The following discussion is from an Institution of Civil Engineers (ICE) prestige lecture based on the original paper and delivered by the authors at the ICE in London on 24 September 2008.1 The event was chaired by Engineering Sustainability editorial panel chair, Professor Chris Rogers from Birmingham University. It was attended by an audience of 130 people as well as being watched by a similar number over a live web-cast. The web-cast can be accessed from the ICE archive for online viewing at http://scenta. interwise.com/etechb/ OnDemand/TH6509.

Sustainable buildings need integrated teams

This report is intended to contribute to strengthening the work of the Government, the Strategic Forum and the Specialist Engineering Alliance in bringing about a more integrated and a more sustainable industry. Its aim is to examine the potential for improving the sustainability of the built environment through an integrated approach to procurement and delivery, in which the role of the specialist engineering sector is recognised for its vital ability to improve building performance. Based on wide ranging knowledge and expertise across the construction sector, it puts forward a vision for sustainable buildings and sets out the actions needed from Government, clients, consultants, contractors and manufacturers to ensure the vision is realised. The report complements the Strategy for Sustainable Construction published by the Department for Business, Enterprise and Regulatory Reform (June 2008).

Exploring key sustainable development themes through learning activities

The Masters programme in Engineering for Sustainable Development at Cambridge University explores a number of key themes, including dealing with: complexity, uncertainty, change, other disciplines, people, environmental limits, whole life costs, and trade-offs. This paper examines how these concepts are introduced and analyses the range of exercises and assignments which are designed to encourage students to test their own assumptions and abilities to develop competencies in these areas. Student performance against these tasks is discussed and student feedback is also presented, with a focus on how their awareness of the themes are met through a range of activities.