Temporal biomass dynamics of an Arctic plankton bloom

Ocean acidification and carbonation, driven by anthropogenic emissions of carbon dioxide (CO2), have been shown to affect a variety of marine organisms and are likely to change ecosystem functioning. High latitudes, especially the Arctic, will be the first to encounter profound changes in carbonate chemistry speciation at a large scale, namely the under-saturation of surface waters with respect to aragonite, a calcium carbonate polymorph produced by several organisms in this region. During a CO2 perturbation study in 2010, in the framework of the EU-funded project EPOCA, the temporal dynamics of a plankton bloom was followed in nine mesocosms, manipulated for CO2 levels ranging initially from about 185 to 1420 ?atm. Dissolved inorganic nutrients were added halfway through the experiment. Autotrophic biomass, as identified by chlorophyll a standing stocks (Chl a), peaked three times in all mesocosms. However, while absolute Chl a concentrations were similar in all mesocosms during the first phase of the experiment, higher autotrophic biomass was measured at high in comparison to low CO2 during the second phase, right after dissolved inorganic nutrient addition. This trend then reversed in the third phase. There were several statistically significant CO2 effects on a variety of parameters measured in certain phases, such as nutrient utilization, standing stocks of particulate organic matter, and phytoplankton species composition. Interestingly, CO2 effects developed slowly but steadily, becoming more and more statistically significant with time. The observed CO2 related shifts in nutrient flow into different phytoplankton groups (mainly diatoms, dinoflagellates, prasinophytes and haptophytes) could have consequences for future organic matter flow to higher trophic levels and export production, with consequences for ecosystem productivity and atmospheric CO2.

Abundance of mesozooplankton in the western part of the Black Sea during Mare Nigrum cruise S-RO1

The SESAME dataset contains mesozooplankton data collected during April 2008 in the North-Western part of Black Sea (between 44°46' N and 42°29'N latitude and 28°64'E and 30°59'E longitude). Mesozooplankton sampling was undertaken at 9 stations where samples were collected using a Hensen net in the 0-10, 10-25, 25-50, 50-100, 100-150, 150-200 m layer. The dataset includes 29 samples analysed for mesozooplankton species composition and abundance. The entire sample or an aliquot (1/2 to 1/4) was analyzed under the binocular microscope. Calculations of zooplankton abundance are made by the following formulae, in accordance with the Report of the third ICES/HELCOM workshop on quality assurance of Biological measurements Warnemünde, Germany, 1996. M - number of counted specimens (ind.), Vf - volume of filtrated water (m³), and K - counted part of sample. (http://www2008.io-warnemuende.de/research/helcom_zp/documents/qa_zp_part.pdf)

MARECHIARA-phytoplankton long-term time-series (1984-2006) at the fixed coastal station in the Gulf of Naples, Southern Tyrrhenian Sea

The "MARECHIARA-phytoplankton" dataset contains phytoplankton data collected in the ongoing time-series at Stn MC ( 40°48.5' N, 14°15' E) in the Gulf of Naples. This dataset spans over the period 1984-2006 and contains data of phytoplankton species composition and abundance. Phytoplankton sampling was regularly conducted from January 1984 till July 1991 and in 1995-2006. Sampling was interrupted from August 1991 till January 1995. The sampling frequency was fortnightly till 1991 and weekly since 1995. Phytoplankton samples were collected at 0.5 m depth using Niskin bottles and immediately fixed with formaldehyde (0.8-1.6% final concentration) for species identification and counts.

Promoting mixed stands through conversion treatments. Effect of holm oak coppices thinning on black pine regeneration

The effects of conversion treatments, depending on ecological factors and silvicultural parameters (thinning intensity, thinning type and rotation, among others) have been studied during the last fifteen years in an experimental trial in Central Spain. The general climate is continental Mediterranean; soils are low depth and limy; vegetation is an homogeneous dense coppices of Quercus ilex with isolated Pinus nigra trees. The experimental design (three locations) includes different thinning intensities (from 0 to 100% of extracted basal area). Inventories have been carried out in 1994 and 2010; thinning treatments were done in 1995 and 2011. Analysis of the effects of the conversion treatment show the increment of diameter and height growth rates, the canopy recovery and the stand resprouting, finding differences in these effects between thinning treatments. Besides the induced changes at holm oak stand, the application of conversion treatment clearly changed the woodland dynamics. Fifteen years after the thinnings, floristic composition varied and an abundant pine regeneration was installed in the woodland. In this work we describe the changes between inventories in tree species composition and diameter distribution, specially in the case of black pine. The conversion treatment caused changes in forest dynamics in the short term, increasing biodiversity and diversifying the forest structure. The fast installation of Pinus regeneration suggests the potential of the zone for the establishment of multipurpose mixed Quercus-Pinus stands in wide areas where Quercus species were favoured by human populations for firewood production. Conversion treatment of coppices, with the creation of mixed stands, constitutes a good management alternative for extensive areas and an interesting technique to adaptation to global change.

Responses of riparian guilds to flowalterations in a Mediterranean stream

Questions: Do Mediterranean riparian guilds show distinct responses to stream water declines? If observed,which are the most sensitive and resilient guilds and theirmost affected attributes? Location: Tie¿tar river below the Rosarito dam, central-western Spain. Methods: We identified riparian guilds based on key woody species features and species distribution within this Mediterranean river corridor, and evaluated similarity of their responses to long-term flow alteration (i.e. stream water declines since dam construction in 1959). Hierarchical cluster analysis was used to group surveyed vegetation bands according to species composition. The groups were designated as riparian guilds where each vegetation group comprising a guild: (1) contains species sharing similar features (using PCA); and (2) shares a similar environment (using DCA). Changes in several guild attributes (i.e. dominance and species composition, diversity and establishment patterns) during the regulated period were compared statistically. We used pre- and post-dam established vegetation bands identified based on old (1956) and modern (2006) aerial photographs and field measurements of woody species diameter. Results: Responses to flow alterations varied between guilds according to ecological requirements of their species. The ability to survive water stress (i.e. ?Xeric? guilds) and drag forces caused by floods (?Torrential? guilds) allowed certain pioneer shrub-dominated guilds (e.g. Flueggea tinctoria and Salix salviifolia) to spread on newly emerged surfaces downward to the main channel after flow alterations, although new shrubland had less species diversity than pre-dam shrubland. In contrast, new hydromorphological conditions following damming limited recruitment of native late-successional tree guilds sensitive to floods (to drag forces, inundation and anoxia; i.e. ?Slow-water? and ?Flood-sensitive?, respectively) and those with greater water requirements (i.e. ?Hydric?) (e.g. Alnus glutinosa and Celtis australis), although species diversity increased in this mature forest through co-existence of remaining riparian species and new arrival of upland species. Conclusions: Changes in several riparian attributes after flow alterations differed between guilds. Stream water declines after damming caused shifts in species-poor pioneer shrubland downwards to the watered channel, resulting in severe declines ofmaturenative forest.Understanding vegetation guild responses provides information about general trends in plant populations and assemblage structures expected to occur during river development and flow regulation, increasing our capacity to detect and synthesize complex flowalteration?riparian ecosystem response relationships, and anticipate irreversible impacts.

Mixing effect on volume growth of Fagus sylvatica and Pinus sylvestris is modulated by stand density

Despite the increasing relevance of mixed stands due to their potential benefits; little information is available with regard to the effect of mixtures on yield in forest systems. Hence, it is necessary to study inter-specific relationships, and the resulting yield in mixed stands, which may vary with stand development, site or stand density, etc. In Spain, the province of Navarra is considered one of the biodiversity reservoirs; however, mixed forests occupy only a small area, probably as a consequence of management plans, in which there is an excessive focus on the productivity aspect, favoring the presence of pure stands of the most marketable species. The aim of this paper is to study how growth efficiencies of beech (Fagus sylvatica) and pine (Pinus sylvestris) are modified by the admixture of the other species and to determine whether stand density modifies interspecific relationships and to what extent. Two models were fitted from Spanish National Forest Inventory data, for P. sylvestris and F. sylvatica respectively, which relate the growth efficiency of the species, i.e. the volume increment of the species divided by the species proportion by area, with dominant height, quadratic mean diameter, stocking degree, and the species proportions by area of each species. Growth efficiency of pine increased with the admixture of beech, decreasing this positive effect when stocking degree increased. However, the positive effect of pine admixture on beech growth was greater at higher stocking degrees. Growth efficiency of beech was also dependent on stand dominant height, resulting in a net negative mixing effect when stand dominant heights and stocking degrees were simultaneously low. There is a relatively large range of species proportions and stocking degrees which results in transgressive overyielding: higher volume increments in mixed stands than that of the most productive pure pine stands. We concluded that stocking degree is a key factor in between-species interactions, being the effects of mixing not always greater at higher stand densities, but it depends on species composition.

Fertilization Management: Assessing New Techniques and Key Interactions to Increase Crop Yields With Less N2O Emissions

El óxido nitroso (N2O) es un potente gas de efecto invernadero (GHG) proveniente mayoritariamente de la fertilización nitrogenada de los suelos agrícolas. Identificar estrategias de manejo de la fertilización que reduzcan estas emisiones sin suponer un descenso de los rendimientos es vital tanto a nivel económico como medioambiental. Con ese propósito, en esta Tesis se han evaluado: (i) estrategias de manejo directo de la fertilización (inhibidores de la nitrificación/ureasa); y (ii) interacciones de los fertilizantes con (1) el manejo del agua, (2) residuos de cosecha y (3) diferentes especies de plantas. Para conseguirlo se llevaron a cabo meta-análisis, incubaciones de laboratorio, ensayos en invernadero y experimentos de campo. Los inhibidores de la nitrificación y de la actividad ureasa se proponen habitualmente como medidas para reducir las pérdidas de nitrógeno (N), por lo que su aplicación estaría asociada al uso eficiente del N por parte de los cultivos (NUE). Sin embargo, su efecto sobre los rendimientos es variable. Con el objetivo de evaluar en una primera fase su efectividad para incrementar el NUE y la productividad de los cultivos, se llevó a cabo un meta-análisis. Los inhibidores de la nitrificación dicyandiamide (DCD) y 3,4-dimetilepyrazol phosphate (DMPP) y el inhibidor de la ureasa N-(n-butyl) thiophosphoric triamide (NBPT) fueron seleccionados para el análisis ya que generalmente son considerados las mejores opciones disponibles comercialmente. Nuestros resultados mostraron que su uso puede ser recomendado con el fin de incrementar tanto el rendimiento del cultivo como el NUE (incremento medio del 7.5% y 12.9%, respectivamente). Sin embargo, se observó que su efectividad depende en gran medida de los factores medioambientales y de manejo de los estudios evaluados. Una mayor respuesta fue encontrada en suelos de textura gruesa, sistemas irrigados y/o en cultivos que reciben altas tasas de fertilizante nitrogenado. En suelos alcalinos (pH ≥ 8), el inhibidor de la ureasa NBPT produjo el mayor efecto. Dado que su uso representa un coste adicional para los agricultores, entender las mejores prácticas que permitan maximizar su efectividad es necesario para posteriormente realizar comparaciones efectivas con otras prácticas que incrementen la productividad de los cultivos y el NUE. En base a los resultados del meta-análisis, se seleccionó el NBPT como un inhibidor con gran potencial. Inicialmente desarrollado para reducir la volatilización de amoniaco (NH3), en los últimos años algunos investigadores han demostrado en estudios de campo un efecto mitigador de este inhibidor sobre las pérdidas de N2O provenientes de suelos fertilizados bajo condiciones de baja humedad del suelo. Dada la alta variabilidad de los experimentos de campo, donde la humedad del suelo cambia rápidamente, ha sido imposible entender mecanísticamente el potencial de los inhibidores de la ureasa (UIs) para reducir emisiones de N2O y su dependencia con respecto al porcentaje de poros llenos de agua del suelo (WFPS). Por lo tanto se realizó una incubación en laboratorio con el propósito de evaluar cuál es el principal mecanismo biótico tras las emisiones de N2O cuando se aplican UIs bajo diferentes condiciones de humedad del suelo (40, 60 y 80% WFPS), y para analizar hasta qué punto el WFPS regula el efecto del inhibidor sobre las emisiones de N2O. Un segundo UI (i.e. PPDA) fue utilizado para comparar el efecto del NBPT con el de otro inhibidor de la ureasa disponible comercialmente; esto nos permitió comprobar si el efecto de NBPT es específico de ese inhibidor o no. Las emisiones de N2O al 40% WFPS fueron despreciables, siendo significativamente más bajas que las de todos los tratamientos fertilizantes al 60 y 80% WFPS. Comparado con la urea sin inhibidor, NBPT+U redujo las emisiones de N2O al 60% WFPS pero no tuvo efecto al 80% WFPS. La aplicación de PPDA incrementó significativamente las emisiones con respecto a la urea al 80% WFPS mientras que no se encontró un efecto significativo al 60% WFPS. Al 80% WFPS la desnitrificación fue la principal fuente de las emisiones de N2O en todos los tratamientos mientras que al 60% tanto la nitrificación como la desnitrificación tuvieron un papel relevante. Estos resultados muestran que un correcto manejo del NBPT puede suponer una estrategia efectiva para mitigar las emisiones de N2O. Con el objetivo de trasladar nuestros resultados de los estudios previos a condiciones de campo reales, se desarrolló un experimento en el que se evaluó la efectividad del NBPT para reducir pérdidas de N y aumentar la productividad durante un cultivo de cebada (Hordeum vulgare L.) en secano Mediterráneo. Se determinó el rendimiento del cultivo, las concentraciones de N mineral del suelo, el carbono orgánico disuelto (DOC), el potencial de desnitrificación, y los flujos de NH3, N2O y óxido nítrico (NO). La adición del inhibidor redujo las emisiones de NH3 durante los 30 días posteriores a la aplicación de urea en un 58% y las emisiones netas de N2O y NO durante los 95 días posteriores a la aplicación de urea en un 86 y 88%, respectivamente. El uso de NBPT también incrementó el rendimiento en grano en un 5% y el consumo de N en un 6%, aunque ninguno de estos incrementos fue estadísticamente significativo. Bajo las condiciones experimentales dadas, estos resultados demuestran el potencial del inhibidor de la ureasa NBPT para mitigar las emisiones de NH3, N2O y NO provenientes de suelos arables fertilizados con urea, mediante la ralentización de la hidrólisis de la urea y posterior liberación de menores concentraciones de NH4 + a la capa superior del suelo. El riego por goteo combinado con la aplicación dividida de fertilizante nitrogenado disuelto en el agua de riego (i.e. fertirriego por goteo) se considera normalmente una práctica eficiente para el uso del agua y de los nutrientes. Algunos de los principales factores (WFPS, NH4 + y NO3 -) que regulan las emisiones de GHGs (i.e. N2O, CO2 y CH4) y NO pueden ser fácilmente manipulados por medio del fertirriego por goteo sin que se generen disminuciones del rendimiento. Con ese propósito se evaluaron opciones de manejo para reducir estas emisiones en un experimento de campo durante un cultivo de melón (Cucumis melo L.). Los tratamientos incluyeron distintas frecuencias de riego (semanal/diario) y tipos de fertilizantes nitrogenados (urea/nitrato cálcico) aplicados por fertirriego. Fertirrigar con urea en lugar de nitrato cálcico aumentó las emisiones de N2O y NO por un factor de 2.4 y 2.9, respectivamente (P < 0.005). El riego diario redujo las emisiones de NO un 42% (P < 0.005) pero aumentó las emisiones de CO2 un 21% (P < 0.05) comparado con el riego semanal. Analizando el Poder de Calentamiento global en base al rendimiento así como los factores de emisión del NO, concluimos que el fertirriego semanal con un fertilizante de tipo nítrico es la mejor opción para combinar productividad agronómica con sostenibilidad medioambiental en este tipo de agroecosistemas. Los suelos agrícolas en las áreas semiáridas Mediterráneas se caracterizan por su bajo contenido en materia orgánica y bajos niveles de fertilidad. La aplicación de residuos de cosecha y/o abonos es una alternativa sostenible y eficiente desde el punto de vista económico para superar este problema. Sin embargo, estas prácticas podrían inducir cambios importantes en las emisiones de N2O de estos agroecosistemas, con impactos adicionales en las emisiones de CO2. En este contexto se llevó a cabo un experimento de campo durante un cultivo de cebada (Hordeum vulgare L.) bajo condiciones Mediterráneas para evaluar el efecto de combinar residuos de cosecha de maíz con distintos inputs de fertilizantes nitrogenados (purín de cerdo y/o urea) en estas emisiones. La incorporación de rastrojo de maíz incrementó las emisiones de N2O durante el periodo experimental un 105%. Sin embargo, las emisiones de NO se redujeron significativamente en las parcelas enmendadas con rastrojo. La sustitución parcial de urea por purín de cerdo redujo las emisiones netas de N2O un 46 y 39%, con y sin incorporación de residuo de cosecha respectivamente. Las emisiones netas de NO se redujeron un 38 y un 17% para estos mismos tratamientos. El ratio molar DOC:NO3 - demostró predecir consistentemente las emisiones de N2O y NO. El efecto principal de la interacción entre el fertilizante nitrogenado y el rastrojo de maíz se dio a los 4-6 meses de su aplicación, generando un aumento del N2O y una disminución del NO. La sustitución de urea por purín de cerdo puede considerarse una buena estrategia de manejo dado que el uso de este residuo orgánico redujo las emisiones de óxidos de N. Los pastos de todo el mundo proveen numerosos servicios ecosistémicos pero también suponen una importante fuente de emisión de N2O, especialmente en respuesta a la deposición de N proveniente del ganado mientras pasta. Para explorar el papel de las plantas como mediadoras de estas emisiones, se analizó si las emisiones de N2O dependen de la riqueza en especies herbáceas y/o de la composición específica de especies, en ausencia y presencia de una deposición de orina. Las hipótesis fueron: 1) las emisiones de N2O tienen una relación negativa con la productividad de las plantas; 2) mezclas de cuatro especies generan menores emisiones que monocultivos (dado que su productividad será mayor); 3) las emisiones son menores en combinaciones de especies con distinta morfología radicular y alta biomasa de raíz; y 4) la identidad de las especies clave para reducir el N2O depende de si hay orina o no. Se establecieron monocultivos y mezclas de dos y cuatro especies comunes en pastos con rasgos funcionales divergentes: Lolium perenne L. (Lp), Festuca arundinacea Schreb. (Fa), Phleum pratense L. (Php) y Poa trivialis L. (Pt), y se cuantificaron las emisiones de N2O durante 42 días. No se encontró relación entre la riqueza en especies y las emisiones de N2O. Sin embargo, estas emisiones fueron significativamente menores en ciertas combinaciones de especies. En ausencia de orina, las comunidades de plantas Fa+Php actuaron como un sumidero de N2O, mientras que los monocultivos de estas especies constituyeron una fuente de N2O. Con aplicación de orina la comunidad Lp+Pt redujo (P < 0.001) las emisiones de N2O un 44% comparado con los monocultivos de Lp. Las reducciones de N2O encontradas en ciertas combinaciones de especies pudieron explicarse por una productividad total mayor y por una complementariedad en la morfología radicular. Este estudio muestra que la composición de especies herbáceas es un componente clave que define las emisiones de N2O de los ecosistemas de pasto. La selección de combinaciones de plantas específicas en base a la deposición de N esperada puede, por lo tanto, ser clave para la mitigación de las emisiones de N2O. ABSTRACT Nitrous oxide (N2O) is a potent greenhouse gas (GHG) directly linked to applications of nitrogen (N) fertilizers to agricultural soils. Identifying mitigation strategies for these emissions based on fertilizer management without incurring in yield penalties is of economic and environmental concern. With that aim, this Thesis evaluated: (i) the use of nitrification and urease inhibitors; and (ii) interactions of N fertilizers with (1) water management, (2) crop residues and (3) plant species richness/identity. Meta-analysis, laboratory incubations, greenhouse mesocosm and field experiments were carried out in order to understand and develop effective mitigation strategies. Nitrification and urease inhibitors are proposed as means to reduce N losses, thereby increasing crop nitrogen use efficiency (NUE). However, their effect on crop yield is variable. A meta-analysis was initially conducted to evaluate their effectiveness at increasing NUE and crop productivity. Commonly used nitrification inhibitors (dicyandiamide (DCD) and 3,4-dimethylepyrazole phosphate (DMPP)) and the urease inhibitor N-(n-butyl) thiophosphoric triamide (NBPT) were selected for analysis as they are generally considered the best available options. Our results show that their use can be recommended in order to increase both crop yields and NUE (grand mean increase of 7.5% and 12.9%, respectively). However, their effectiveness was dependent on the environmental and management factors of the studies evaluated. Larger responses were found in coarse-textured soils, irrigated systems and/or crops receiving high nitrogen fertilizer rates. In alkaline soils (pH ≥ 8), the urease inhibitor NBPT produced the largest effect size. Given that their use represents an additional cost for farmers, understanding the best management practices to maximize their effectiveness is paramount to allow effective comparison with other practices that increase crop productivity and NUE. Based on the meta-analysis results, NBPT was identified as a mitigation option with large potential. Urease inhibitors (UIs) have shown to promote high N use efficiency by reducing ammonia (NH3) volatilization. In the last few years, however, some field researches have shown an effective mitigation of UIs over N2O losses from fertilized soils under conditions of low soil moisture. Given the inherent high variability of field experiments where soil moisture content changes rapidly, it has been impossible to mechanistically understand the potential of UIs to reduce N2O emissions and its dependency on the soil water-filled pore space (WFPS). An incubation experiment was carried out aiming to assess what is the main biotic mechanism behind N2O emission when UIs are applied under different soil moisture conditions (40, 60 and 80% WFPS), and to analyze to what extent the soil WFPS regulates the effect of the inhibitor over N2O emissions. A second UI (i.e. PPDA) was also used aiming to compare the effect of NBPT with that of another commercially available urease inhibitor; this allowed us to see if the effect of NBPT was inhibitor-specific or not. The N2O emissions at 40% WFPS were almost negligible, being significantly lower from all fertilized treatments than that produced at 60 and 80% WFPS. Compared to urea alone, NBPT+U reduced the N2O emissions at 60% WFPS but had no effect at 80% WFPS. The application of PPDA significantly increased the emissions with respect to U at 80% WFPS whereas no significant effect was found at 60% WFPS. At 80% WFPS denitrification was the main source of N2O emissions for all treatments. Both nitrification and denitrification had a determinant role on these emissions at 60% WFPS. These results suggest that adequate management of the UI NBPT can provide, under certain soil conditions, an opportunity for N2O mitigation. We translated our previous results to realistic field conditions by means of a field experiment with a barley crop (Hordeum vulgare L.) under rainfed Mediterranean conditions in which we evaluated the effectiveness of NBPT to reduce N losses and increase crop yields. Crop yield, soil mineral N concentrations, dissolved organic carbon (DOC), denitrification potential, NH3, N2O and nitric oxide (NO) fluxes were measured during the growing season. The inclusion of the inhibitor reduced NH3 emissions in the 30 d following urea application by 58% and net N2O and NO emissions in the 95 d following urea application by 86 and 88%, respectively. NBPT addition also increased grain yield by 5% and N uptake by 6%, although neither increase was statistically significant. Under the experimental conditions presented here, these results demonstrate the potential of the urease inhibitor NBPT in abating NH3, N2O and NO emissions from arable soils fertilized with urea, slowing urea hydrolysis and releasing lower concentrations of NH4 + to the upper soil layer. Drip irrigation combined with split application of N fertilizer dissolved in the irrigation water (i.e. drip fertigation) is commonly considered best management practice for water and nutrient efficiency. Some of the main factors (WFPS, NH4 + and NO3 -) regulating the emissions of GHGs (i.e. N2O, carbon dioxide (CO2) and methane (CH4)) and NO can easily be manipulated by drip fertigation without yield penalties. In this study, we tested management options to reduce these emissions in a field experiment with a melon (Cucumis melo L.) crop. Treatments included drip irrigation frequency (weekly/daily) and type of N fertilizer (urea/calcium nitrate) applied by fertigation. Crop yield, environmental parameters, soil mineral N concentrations, N2O, NO, CH4, and CO2 fluxes were measured during the growing season. Fertigation with urea instead of calcium nitrate increased N2O and NO emissions by a factor of 2.4 and 2.9, respectively (P < 0.005). Daily irrigation reduced NO emissions by 42% (P < 0.005) but increased CO2 emissions by 21% (P < 0.05) compared with weekly irrigation. Based on yield-scaled Global Warming Potential as well as NO emission factors, we conclude that weekly fertigation with a NO3 --based fertilizer is the best option to combine agronomic productivity with environmental sustainability. Agricultural soils in semiarid Mediterranean areas are characterized by low organic matter contents and low fertility levels. Application of crop residues and/or manures as amendments is a cost-effective and sustainable alternative to overcome this problem. However, these management practices may induce important changes in the nitrogen oxide emissions from these agroecosystems, with additional impacts on CO2 emissions. In this context, a field experiment was carried out with a barley (Hordeum vulgare L.) crop under Mediterranean conditions to evaluate the effect of combining maize (Zea mays L.) residues and N fertilizer inputs (organic and/or mineral) on these emissions. Crop yield and N uptake, soil mineral N concentrations, dissolved organic carbon (DOC), denitrification capacity, N2O, NO and CO2 fluxes were measured during the growing season. The incorporation of maize stover increased N2O emissions during the experimental period by c. 105 %. Conversely, NO emissions were significantly reduced in the plots amended with crop residues. The partial substitution of urea by pig slurry reduced net N2O emissions by 46 and 39 %, with and without the incorporation of crop residues respectively. Net emissions of NO were reduced 38 and 17 % for the same treatments. Molar DOC:NO3 - ratio was found to be a robust predictor of N2O and NO fluxes. The main effect of the interaction between crop residue and N fertilizer application occurred in the medium term (4-6 month after application), enhancing N2O emissions and decreasing NO emissions as consequence of residue incorporation. The substitution of urea by pig slurry can be considered a good management strategy since N2O and NO emissions were reduced by the use of the organic residue. Grassland ecosystems worldwide provide many important ecosystem services but they also function as a major source of N2O, especially in response to N deposition by grazing animals. In order to explore the role of plants as mediators of these emissions, we tested whether and how N2O emissions are dependent on grass species richness and/or specific grass species composition in the absence and presence of urine deposition. We hypothesized that: 1) N2O emissions relate negatively to plant productivity; 2) four-species mixtures have lower emissions than monocultures (as they are expected to be more productive); 3) emissions are lowest in combinations of species with diverging root morphology and high root biomass; and 4) the identity of the key species that reduce N2O emissions is dependent on urine deposition. We established monocultures and two- and four-species mixtures of common grass species with diverging functional traits: Lolium perenne L. (Lp), Festuca arundinacea Schreb. (Fa), Phleum pratense L. (Php) and Poa trivialis L. (Pt), and quantified N2O emissions for 42 days. We found no relation between plant species richness and N2O emissions. However, N2O emissions were significantly reduced in specific plant species combinations. In the absence of urine, plant communities of Fa+Php acted as a sink for N2O, whereas the monocultures of these species constituted a N2O source. With urine application Lp+Pt plant communities reduced (P < 0.001) N2O emissions by 44% compared to monocultures of Lp. Reductions in N2O emissions by species mixtures could be explained by total biomass productivity and by complementarity in root morphology. Our study shows that plant species composition is a key component underlying N2O emissions from grassland ecosystems. Selection of specific grass species combinations in the context of the expected nitrogen deposition regimes may therefore provide a key management practice for mitigation of N2O emissions.

Efectos de la aplicación de fertilizantes de nueva generación en la dehesa toledana: producción, diversidad y composición florística de pastos herbáceos

Fertilization can be an interesting treatment to improve the different productions of the dehesa and to improve tree vigor. In order to evaluate the effect of different fertilizers of new generation on herbaceous pasture diversity and species composition, in this work we analyzed the effect of three treatments: control (natural pastures), fertization with 36 UF of P2O5 of a complex NPK and low content of N, and natural phosphates. Fertilization was applied in autumn of 2009, 2010 and 2011 and we analized herbaceous pastures composition and yield in springs of 2010, 2011 and 2012 (one control per year). The best results of production were obtained with the NPK application; also, pasture specific richness and diversity improved with the fertilization in years of average regime of precipitation.

Metodología para la estimación de indicadores armonizados a partir de los inventarios forestales nacionales europeos con especial énfasis en la biodiversidad forestal

Durante las últimas décadas el objetivo principal de la silvicultura y la gestión forestal en Europa ha pasado de ser la producción de madera a ser la gestión sostenible de los ecosistemas, por lo que se deben considerar todos los bienes y servicios que proporcionan los bosques. En consecuencia, es necesario contar con información forestal periódica de diversos indicadores forestales a nivel europeo para apoyar el desarrollo y la implementación de políticas medioambientales y que se realice una gestión adecuada. Para ello, se requiere un seguimiento intensivo sobre el estado de los bosques, por lo que los Inventarios Forestales Nacionales (IFN), (principal fuente de información forestal a gran escala), han aumentado el número de variables muestreadas para cumplir con los crecientes requerimientos de información. Sin embargo, las estimaciones proporcionadas por los diferentes países no son fácilmente comparables debido a las diferencias en las definiciones, los diseños de muestreo, las variables medidas y los protocolos de medición. Por esto, la armonización de los datos que proporcionan los diferentes países es fundamental para la contar con una información forestal sólida y fiable en la Unión europea (UE). La presente tesis tiene dos objetivos principales: (i) establecer el diseño de una metodología para evaluar la biodiversidad forestal en el marco del Inventario forestal nacional de España teniendo en cuenta las diferentes iniciativas nacionales e internacionales, con el objetivo de producir estimaciones comparables con las de otros países de la UE y (ii) armonizar los indicadores más relevantes para satisfacer los requerimientos nacionales e internacionales. Como consecuencia del estudio realizado para alcanzar el primer objetivo, la metodología diseñada para estimar la biodiversidad fue adoptada por el Tercer Inventario forestal nacional. Ésta se componía de indicadores agrupados en: cobertura del suelo, composición de árboles y especies de arbustos, riqueza de especies herbáceas y helechos, especies amenazadas, estructura, madera muerta, y líquenes epífitos. Tras el análisis del diseño metodológico y de los datos proporcionados, se observó la conveniencia de modificarla con el fin de optimizar los costes, viabilidad, calidad y cantidad de los datos registrados. En consecuencia, en el Cuarto Inventario Forestal Nacional se aplica una metodología modificada, puesto que se eliminó el muestreo de especies herbáceas y helechos, de líquenes epífitos y de especies amenazadas, se modificaron los protocolos de la toma de datos de estructura y madera muerta y se añadió el muestreo de especies invasoras, edad, ramoneo y grado de naturalidad de la masa. En lo que se refiere al segundo objetivo, se ha avanzado en la armonización de tres grupos de variables considerados como relevantes en el marco de los IFN: los indicadores de vegetación no arbórea (que juegan un papel relevante en los ecosistemas, es donde existe la mayor diversidad de plantas y hasta ahora no se conocían los datos muestreados en los IFN), la determinación de los árboles añosos (que tienen un importante papel como nicho ecológico y su identificación es especialmente relevante para la evaluación de la biodiversidad forestal) y el bosque disponible para el suministro de madera (indicador básico de los requerimientos internacionales de información forestal). Se llevó a cabo un estudio completo de la posible armonización de los indicadores de la vegetación no arbórea en los IFN. Para ello, se identificaron y analizaron las diferentes definiciones y diseños de muestreo empleados por los IFN, se establecieron definiciones de referencia y se propusieron y analizaron dos indicadores que pudiesen ser armonizados: MSC (mean species cover) que corresponde a la media de la fracción de cabida cubierta de cada especie por tipo de bosque y MTC (mean total cover). Se estableció una nueva metodología que permite identificar los árboles añosos con los datos proporcionados por los inventarios forestales nacionales con el objetivo de proporcionar una herramienta eficaz para facilitar la gestión forestal considerando la diversidad de los sistemas forestales. Se analizó el concepto de "bosque disponible para el suministro de madera" (FAWS) estudiando la consistencia de la información internacional disponible con el fin de armonizar su estimación y de proporcionar recomendaciones para satisfacer los requerimientos europeos. Como resultado, se elaboró una nueva definición de referencia de FAWS (que será adoptada por el proceso paneuropeo) y se analiza el impacto de la adopción de esta nueva definición en siete países europeos. El trabajo realizado en esta tesis, puede facilitar el suministrar y/o armonizar parcial o totalmente casi la mitad de los indicadores de información forestal solicitados por los requerimientos internacionales (47%). De éstos, prácticamente un 85% tienen relación con los datos inventariados empleando la metodología propuesta para la estimación de la biodiversidad forestal, y el resto, con el establecimiento de la definición de bosque disponible para el suministro de madera. No obstante, y pese a que esta tesis supone un avance importante, queda patente que las necesidades de información forestal son cambiantes y es imprescindible continuar el proceso de armonización de los IFN europeos. ABSTRACT Over the last few decades, the objectives on forestry and forest management in Europe have shifted from being primarily focused on wood production to sustainable ecosystem management, which should consider all the goods and services provided by the forest. Therefore, there is a continued need for forest indicators and assessments at EU level to support the development and implementation of a number of European environmental policies and to conduct a proper forest management. To address these questions, intensive monitoring on the status of forests is required. Therefore, the scope of National Forest Inventories (NFIs), (primary source of data for national and large-area assessments), has been broadened to include new variables to meet these increasing information requirements. However, estimates produced by different countries are not easily comparable because of differences in NFI definitions, plot configurations, measured variables, and measurement protocols. As consequence, harmonizing data produced at national level is essential for the production of sound EU forest information. The present thesis has two main aims: (i) to establish a methodology design to assess forest biodiversity in the frame of the Spanish National Forest Inventory taking into account the different national and international initiatives with the intention to produce comparable estimates with other EU countries and (ii) to harmonize relevant indicators for national and international requirements. In consequence of the work done related to the first objective, the established methodology to estimate forest biodiversity was adopted and launched under the Third National Forest Inventory. It was composed of indicators grouped into: cover, woody species composition, richness of herbaceous species and ferns, endangered species, stand structure, dead wood, and epiphytic lichens. This methodology was analyzed considering the provided data, time costs, feasibility, and requirements. Consequently, in the ongoing Fourth National Forest Inventory a modified methodology is applied: sampling of herbaceous species and ferns, epiphytic lichens and endangered species were removed, protocols regarding structure and deadwood were modified, and sampling of invasive species, age, browsing impact and naturalness were added. As regards the second objective, progress has been made in harmonizing three groups of variables considered relevant in the context of IFN: Indicators of non-tree vegetation (which play an important role in forest ecosystems, it is where the highest diversity of plants occur and so far the related sampled data in NFIs were not known), the identification of old-growth trees (which have an important role as ecological niche and its identification is especially relevant for the assessment of forest biodiversity) and the available forest for wood supply (basic indicator of international forestry information requirements). A complete analysis of ground vegetation harmonization possibilities within NFIs frame was carried on by identifying and analyzing the different definitions and sampling techniques used by NFIs, providing reference definitions related to ground vegetation and proposing and analyzing two ground vegetation harmonized indicators: “Mean species cover” (MSC) and “Mean total cover” (MTC) for shrubs by European forest categories. A new methodology based on NFI data was established with the aim to provide an efficient tool for policy makers to estimate the number of old-growth trees and thus to be able to perform the analysis of the effect of forest management on the diversity associated to forest systems. The concept of “forest available for wood supply” (FAWS) was discussed and clarified, analyzing the consistency of the available international information on FAWS in order to provide recommendations for data harmonization at European level regarding National Forest Inventories (NFIs). As a result, a new reference definition of FAWS was provided (which will be adopted in the pan-European process) and the consequences of the use of this new definition in seven European countries are analyzed. The studies carried on in this thesis, can facilitate the supply and/or harmonization partially or fully of almost half of the forest indicators (47%) needed for international requirements. Of these, nearly 85% are related to inventoried data using the proposed methodology for the estimation of forest biodiversity, and the rest, with the establishment of the definition of forest available for wood supply. However, despite this thesis imply an important development, forest information needs are changing and it is imperative to continue the process of harmonization of European NFIs.

Contribución al conocimiento de los macrohongos en la provincia de Tambopata -Madre de Dios, Perú

El presente trabajo de investigación es una contribución al conocimiento científico de los macrohongos de los Phyllum Ascomycetos y Basidiomycetos en el departamento amazónico Madre de Dios (Perú), investigación desarrollada en la región durante los años 2006 al 2014. Durante estos años se han recorrido las trochas de investigación dentro de las 6 áreas, seleccionadas según su grado de intervención antrópica, recolectando y fotografiando todos los carpóforos que en ellas se encontraban. Así mismo se ha realizado una revisión bibliografía exhaustiva para poder identificar a estas especies de los Phylum Basidiomycetos y Ascomycetos, fotografiando las esporas en los casos que esto fue posible. Las muestras fueron recolectadas en 6 áreas con diferentes grados de intervención humana, para poder determinar si se encontraba diferencia significativa en la composición de especies de Macrohongos entre ellas. Así mismo se consideró el tipo de bosque donde se encontraba la muestra y el sustrato donde se desarrollaba. Las muestras fueron buscadas y recolectadas en las dos épocas del año (seca y lluviosa), para saber si este factor climatológico era determinante y afectaba el número de carpóforos encontrados. Se han identificado completamente 70 especies pertenecientes a 25 familias, siendo la familia Xylariaceae la más representativa para el Phyllum Ascomycetos y la familia Polyporaceae para el caso del Phyllum basidiomycetos, resultando cinco especies nuevos registros para el Perú. De las especies identificadas 23 son de interés comestible, 13 son de interés medicinal, 2 de interés mágico religioso, 2 tóxicas, 2 micorrizógenas y de 30 especies no se conocen sus usos para la ciencia. Así mismo se identificó a 6 especies promisorias (géneros Auricularia sp. y Pleurotus sp.) para el cultivo con fines alimentarios de autoconsumo y la posible comercialización a pequeña y gran escala, puesto que estas especies promisorias transforman los residuos lignocelulosicos en alimento. Se ha confeccionado una guía de campo para la identificación de los macrohongos, sus usos y recomendaciones para su consumo, con lo cual queda abierta otra puerta de nuestra biodiversidad al interés científico, gastronómico y turístico. ABSTRACT This investigation is a contribution to the scientific knowledge of the Phyllum Ascomycetos and Basidiomycetos mushrooms in the Amazonian department Madre de Dios (Peru). The study was carried out from 2006 till 2014, during which forest study paths were crossed in six areas were all types of found carpophores were collected and photographed. In order to identify the Phylum Basidiomycetos and Ascomycetos species, an intensive biographical review was carried out and photographs were taken from the spores in case it was possible to assist the identification. Samples were collected in six areas with different human intervention and forest types so that any significant difference in the species´ composition could be analyzed between these different zones and between the species specific area. The samples were searched and collected during two different seasons (dry and rainy season) to analyze if this climatologically factor affects the number of found species. In total 70 species were completely identified, belonging to 25 families. The most representative families were the Xylariaceae for the Phyllum Ascomycetos and the Polyporaceae in the case of the Phyllum Basidiomycetos. Of all the identified species, 23 are considered edible, thirteen are identified as medicinal, and two are known for psychedelic and religious practices, two are toxic, two are mycorrhizal species and of 30 species the use is unknown to science. Five species are newly registered for Peru, Moreover, six species of the Auricularia sp. and Pleurotus sp. gender were identified as promising species for cultivation to serve auto consumption and possibly small and large scale commercialization. These species transform lignocelular waste in food. Part of this study was the development of a field guide to identify mushrooms and which can be used to open doors to our biodiversity for multiple interests such as scientific, gastronomy, and tourism.

Invariant scaling relationships for interspecific plant biomass production rates and body size

The allometric relationships for plant annualized biomass production (“growth”) rates, different measures of body size (dry weight and length), and photosynthetic biomass (or pigment concentration) per plant (or cell) are reported for multicellular and unicellular plants representing three algal phyla; aquatic ferns; aquatic and terrestrial herbaceous dicots; and arborescent monocots, dicots, and conifers. Annualized rates of growth G scale as the 3/4-power of body mass M over 20 orders of magnitude of M (i.e., G ∝ M3/4); plant body length L (i.e., cell length or plant height) scales, on average, as the 1/4-power of M over 22 orders of magnitude of M (i.e., L ∝ M1/4); and photosynthetic biomass Mp scales as the 3/4-power of nonphotosynthetic biomass Mn (i.e., Mp ∝ Mn3/4). Because these scaling relationships are indifferent to phylogenetic affiliation and habitat, they have far-reaching ecological and evolutionary implications (e.g., net primary productivity is predicted to be largely insensitive to community species composition or geological age).

Fatores abióticos condicionantes da distribuição de espécies arbóreas em quatro formações florestais do Estado de São Paulo

No estudo das comunidades florestais, estabelecer a importância relativa dos fatores que definem a composição e a distribuição das espécies é um desafio. Em termos de gradientes ambientais o estudo das respostas das espécies arbóreas são essenciais para a compreensão dos processos ecológicos e decisões de conservação. Neste sentido, para contribuir com a elucidação dos processos ecológicos nas principais formações florestais do Estado de São Paulo (Floresta Ombrófila Densa de Terras Baixas, Floresta Ombrófila Densa Submontana, Floresta Estacional Semidecidual e Savana Florestada) este trabalho objetivou responder as seguintes questões: (I) a composição florística e a abundância das espécies arbóreas, em cada unidade fitogeográfica, variam conforme o gradiente edáfico e topográfico?; (II) características do solo e topografia podem influenciar na previsibilidade de ocorrência de espécies arbóreas de ampla distribuição em diferentes tipos vegetacionais? (III) existe relação entre o padrão de distribuição espacial de espécies arbóreas e os parâmetros do solo e topografia? O trabalho foi realizado em parcelas alocadas em unidades de conservação (UC) que apresentaram trechos representativos, em termos de conservação e tamanho, das quatro principais formações florestais presentes no Estado de São Paulo. Em cada UC foram contabilizados os indivíduos arbóreos (CAP ≥ 15 cm), topografia, dados de textura e atributos químicos dos solos em uma parcela de 10,24 ha, subdividida em 256 subparcelas. Análises de correspodência canônica foram aplicadas para estabelecer a correspondência entre a abundância das espécies e o gradiente ambiental (solo e topografia). O método TWINSPAN modificado foi aplicado ao diagrama de ordenação da CCA para avaliar a influência das variáveis ambientais (solo e topografia) na composição de espécies. Árvores de regressão \"ampliadas\" (BRT) foram ajustadas para a predição da ocorrência das espécies segundo as variáveis de solo e topografia. O índice de Getis-Ord (G) foi utilizado para determinar a autocorrelação espacial das variáveis ambientais utilizadas nos modelos de predição da ocorrência das espécies. Nas unidades fitogeográficas analisadas, a correspondência entre o gradiente ambiental (solo e topografia) e a abundância das espécies foi significativa, especialmente na Savana Florestada onde observou-se a maior relação. O solo e a topografia também se relacionaram com a semelhança na composição florística das subparcelas, com exceção da Floresta Estacional Semicidual (EEC). As principais variáveis de solo e topografia relacionadas a flora em cada UC foram: (1) Na Floresta Ombrófila Densa de Terras Baixas (PEIC) - teor de alumínio na camada profunda (Al (80-100 cm)) que pode refletir os teor de Al na superfície, acidez do solo (pH(H2O) (5-25 cm)) e altitude, que delimitou as áreas alagadas; (2) Na Floresta Ombrófila Densa Submontana (PECB) - altitude, fator que, devido ao relevo acidentado, influencia a temperatura e incidência de sol no sub-bosque; (3) Na Savana Florestada (EEA) - fertilidade, tolerância ao alumínio e acidez do solo. Nos modelos de predição BRT, as variáveis químicas dos solos foram mais importantes do que a textura, devido à pequena variação deste atributo no solo nas áreas amostradas. Dentre as variáveis químicas dos solos, a capacidade de troca catiônica foi utilizada para prever a ocorrência das espécies nas quatro formações florestais, sendo particularmente importante na camada mais profunda do solo da Floresta Ombrófila Densa de Terras Baixas (PEIC). Quanto à topografia, a altitude foi inserida na maioria dos modelos e apresentou diferentes influências sobre as áreas de estudo. De modo geral, para presença das espécies de ampla distribuição observou-se uma mesma tendência quando à associação com os atributos dos solos, porém com amplitudes dos descritores edáficos que variaram de acordo com a área de estudo. A ocorrência de Guapira opposita e Syagrus romanzoffiana, cujo padrão variou conforme a escala, foi explicada por variáveis com padrões espaciais agregados que somaram entre 30% e 50% de importância relativa no modelo BRT. A presença de A. anthelmia, cujo padrão também apresentou certo nível de agregação, foi associada apenas a uma variável com padrão agregado, a altitude (21%), que pode ter exercido grande influência na distribuição da espécie ao delimitar áreas alagadas. T. guianensis se associou a variáveis ambientais preditoras com padrão espacial agregado que somaram cerca de 70% de importância relativa, o que deve ter sido suficiente para estabelecer o padrão agregado em todas as escalas. No entanto, a influência dos fatores ambientais no padrão de distribuição da espécie não depende apenas do ótimo ambiental da espécie, mas um resultado da interação espécie-ambiente. Concluiu-se que: (I) características edáficas e topográficas explicaram uma pequena parcela da composição florística, em cada unidade fitogeográfica, embora a ocorrência de algumas espécies tenha se associado ao gradiente edáfico e topográfico; (II) a partir de características dos solos e da topografia foi possível prever a presença de espécies arbóreas, que apresentaram particularidades em relação a sua associação com o solo de cada fitofisionomia; (III) a partir de associações descritivas o solo e a topografia influenciam o padrão de distribuição espacial das espécies, na proporção em que contribuem para a presença das mesmas.

A methodology for applying Taxonomic Sufficiency and benthic biotic indices in two Mediterranean areas

Biotic indices have been developed to summarise information provided by benthic macroinvertebrates, but their use can require specialized taxonomic expertise as well as a time-consuming operation. Using high taxonomic level in biotic indices reduces sampling processing time but should be considered with caution, since assigning tolerance level to high taxonomic levels may cause uncertainty. A methodology for family level tolerance categorization based on the affinity of each family with disturbed or undisturbed conditions was employed. This family tolerance classification approach was tested in two different areas from Mediterranean Sea affected by sewage discharges. Biotic indices employed at family level responded correctly to sewage presence. However, in areas with different communities among stations and high diversity of species within each family, assigning the same tolerance level to a whole family could imply mistakes. Thus, use of high taxonomic level in biotic indices should be only restricted to areas where homogeneous community is presented and families across sites have similar species composition.