995 resultados para Software components
Resumo:
Earth System Models (ESM) have been successfuly developed over past few years, and are currently beeing used for simulating present day-climate, seasonal to interanual predictions of climate change. The supercomputer performance plays an important role in climate modeling since one of the challenging issues for climate modellers is to efficiently and accurately couple earth System components on present day computers architectures. At the Barcelona Supercomputing Center (BSC), we work with the EC- Earth System Model. The EC- Earth is an ESM, which currently consists of an atmosphere (IFS) and an ocean (NEMO) model that communicate with each other through the OASIS coupler. Additional modules (e.g. for chemistry and vegetation ) are under development. The EC-Earth ESM has been ported successfully over diferent high performance computin platforms (e.g, IBM P6 AIX, CRAY XT-5, Intelbased Linux Clusters, SGI Altix) at diferent sites in Europ (e.g., KNMI, ICHEC, ECMWF). The objective of the first phase of the project was to identify and document the issues related with the portability and performance of EC-Earth on the MareNostrum supercomputer, a System based on IBM PowerPC 970MP processors and run under a Linux Suse Distribution. EC-Earth was successfully ported to MareNostrum, and a compilation incompatibilty was solved by a two step compilation approach using XLF version 10.1 and 12.1 compilers. In addition, the EC-Earth performance was analyzed with respect to escalability and trace analysis with the Paravear software. This analysis showed that EC-Earth with a larger number of IFS CPUs (<128) is not feasible at the moment since some issues exists with the IFS-NEMO balance and MPI Communications.
Resumo:
Proyecto de migración e implantación de software libre en el Ayuntamiento de Palencia.
Resumo:
El projecte que s’ha presentat correspon a la titulació d’Enginyeria en Informàtica i conté diversos aspectes relacionats al desenvolupament d’una aplicació web per a gestionar els pressupostos de l’empresa Ncora. Es presenta un estudi i anàlisi de requeriments, una compra de servidors, una instal·lació i configuració dels servidors en l’entorn hardware del núvol de Ncora, un anàlisi i disseny de la base de dades i un desenvolupament a mida de l’aplicació software. L’objectiu principal del projecte és l’estalvi de temps en la creació de pressupostos i la ràpida cerca de pressupostos fets així com dels seus components.
Resumo:
The article presents and discusses estimates of social and economic indicators for Italy’s regions in benchmark years roughly from Unification to the present day: life expectancy, education, GDP per capita at purchasing power parity, and the new Human Development Index (HDI). A broad interpretative hypothesis, based on the distinction between passive and active modernization, is proposed to account for the evolution of regional imbalances over the long-run. In the lack of active modernization, Southern Italy converged thanks to passive modernization, i.e., State intervention: however, this was more effective in life expectancy, less successful in education, expensive and as a whole ineffective in GDP. As a consequence, convergence in the HDI occurred from the late XIX century to the 1970s, but came to a sudden halt in the last decades of the XX century.
Resumo:
O presente estudo teve como objetivo desenvolver um sistema de informação em enfermagem com aplicação na assistência de enfermagem e no gerenciamento do serviço. O SisEnf - Sistema de Informação em Enfermagem - é um software livre composto pelo módulo assistencial de enfermagem: histórico, exame clínico e plano de cuidados; o módulo gerencial compõe-se de: escala de serviço, gestão de pessoal, indicadores hospitalares e outros elementos. O sistema foi implementado na Clínica Médica do Hospital Universitário Lauro Wanderley, da Universidade Federal da Paraíba. Tendo em vista a necessidade de aproximação entre usuário e desenvolvedor, e a constante mudança de requisitos funcionais durante o processo iterativo, foi adotado o método do processo unificado. O SisEnf foi desenvolvido sobre plataforma WEB e com emprego de software livre. Portanto, o trabalho desenvolvido procurou auxiliar o processo de trabalho da enfermagem que agora terá oportunidade de incorporar a tecnologia da informação na sua rotina de trabalho.
Resumo:
The identification and integration of reusable and customizable CSCL (Computer Supported Collaborative Learning) may benefit from the capture of best practices in collaborative learning structuring. The authors have proposed CLFPs (Collaborative Learning Flow Patterns) as a way of collecting these best practices. To facilitate the process of CLFPs by software systems, the paper proposes to specify these patterns using IMS Learning Design (IMS-LD). Thus, teachers without technical knowledge can particularize and integrate CSCL tools. Nevertheless, the support of IMS-LD for describing collaborative learning activities has some deficiencies: the collaborative tools that can be defined in these activities are limited. Thus, this paper proposes and discusses an extension to IMS-LD that enables to specify several characteristics of the use of tools that mediate collaboration. In order to obtain a Unit of Learning based on a CLFP, a three stage process is also proposed. A CLFP-based Unit of Learning example is used to illustrate the process and the need of the proposed extension.
Resumo:
Tratando-se de uma era na qual a informação constitui abertura concernente aos benefícios que dela advêm, o campo da informática em enfermagem ganha seu momento. Este estudo teve como objetivo construir um software educativo para o ensino-aprendizado da técnica de cateterismo urinário de demora e comparar a apreensão do conhecimento sobre a técnica de cateterismo urinário de demora antes e após a aplicação de um software educativo. Pesquisa descritiva de abordagem quantitativa tendo como fundamentação pedagógica na construção do software as teorias de Piaget e Vygotsky. Posteriormente, avaliou-se o processo ensino-aprendizagem através de um questionário composto por 10 questões de múltipla escolha, anterior à utilização do software, e o mesmo teste após o manuseio do software, resolvidos por 60 alunos participantes. Os dados obtidos demonstraram significativa contribuição do software após a aplicação do mesmo, sendo bastante útil no processo ensino-aprendizagem.
Resumo:
This paper describes a Computer-Supported Collaborative Learning (CSCL) case study in engineering education carried out within the context of a network management course. The case study shows that the use of two computing tools developed by the authors and based on Free- and Open-Source Software (FOSS) provide significant educational benefits over traditional engineering pedagogical approaches in terms of both concepts and engineering competencies acquisition. First, the Collage authoring tool guides and supports the course teacher in the process of authoring computer-interpretable representations (using the IMS Learning Design standard notation) of effective collaborative pedagogical designs. Besides, the Gridcole system supports the enactment of that design by guiding the students throughout the prescribed sequence of learning activities. The paper introduces the goals and context of the case study, elaborates onhow Collage and Gridcole were employed, describes the applied evaluation methodology, anddiscusses the most significant findings derived from the case study.
Resumo:
We evaluated 25 protocol variants of 14 independent computational methods for exon identification, transcript reconstruction and expression-level quantification from RNA-seq data. Our results show that most algorithms are able to identify discrete transcript components with high success rates but that assembly of complete isoform structures poses a major challenge even when all constituent elements are identified. Expression-level estimates also varied widely across methods, even when based on similar transcript models. Consequently, the complexity of higher eukaryotic genomes imposes severe limitations on transcript recall and splice product discrimination that are likely to remain limiting factors for the analysis of current-generation RNA-seq data.
Resumo:
A complexidade para operacionalizar o método de dimensionamento de profissionais de enfermagem, diante das inúmeras variáveis relativas à identificação da carga de trabalho, do tempo efetivo de trabalho dos profissionais e do Índice de Segurança Técnica (IST), evidenciou a necessidade de desenvolver um software, denominado: Dimensionamento Informatizado de Profissionais de Enfermagem (DIPE). Este estudo exploratório descritivo teve como objetivo avaliar a qualidade técnica e o desempenho funcional do DIPE. Participaram como sujeitos da pesquisa dezoito avaliadores, sendo dez enfermeiros docentes ou enfermeiros gerentes de unidades de saúde hospitalar e oito especialistas em informática em saúde. A avaliação do software baseou-se na norma NBR ISO/IEC 9126-1, considerando as características funcionalidade, confiabilidade, usabilidade, eficiência e manutenibilidade. A avaliação do software obteve resultados positivos, sobre os quais os avaliadores concordaram em todas as características avaliadas. As sugestões relatadas serão importantes para a proposição de melhorias e aprimoramento do DIPE.
Resumo:
Este artigo descreve o desenvolvimento e avaliação de um software que verifica a acurácia diagnóstica de alunos de enfermagem. O software foi baseado num modelo que utiliza conceitos da lógica fuzzy, em PERL, banco de dados MySQL para acesso pela internet e a classificação NANDA-I 2007-2008. Avaliou-se a qualidade técnica e a usabilidade do software utilizando instrumentos específicos. A atividade proposta no software possui quatro etapas nas quais o aluno estabelece valores de relação entre diagnósticos de enfermagem, características definidoras/fatores de risco e casos clínicos. Os valores de relação determinados pelo aluno são comparados aos de especialistas, gerando escores de desempenho para o aluno. Na avaliação, o software atendeu satisfatoriamente as necessidades de qualidade técnica e, segundo os alunos, trouxe benefícios ao aprendizado, podendo transformar-se em uma ferramenta educacional no ensino do diagnóstico de enfermagem.
Resumo:
O mapeamento conceitual (MC) é uma estratégia de ensino que pode ser utilizada para resoluções de casos clínicos, porém de trabalhosa execução manuscrita. O estudo teve por objetivos descrever os desafios e as contribuições do software Cmap Tools® para a construção de mapas conceituais para resolução de caso clínico. Para isso, utilizou-se método descritivo, qualitativo, com estudantes da 3ª série de Graduação em Enfermagem da Universidade Federal de São Paulo. A estratégia de ensino foi aplicada e os dados foram coletados pela técnica do grupo focal. Os resultados evidenciaram que o software facilita e garante a organização, visualização e correlação dos dados, porém com dificuldades iniciais relacionadas ao manejo das ferramentas que dispõe. Concluiu-se que o software Cmap Tools® favoreceu a construção dos MC por seus recursos de formatação e autoformatação e que estratégias de orientação deveriam ser implantadas para a fase inicial de utilização.
Resumo:
This paper discusses the role of deterministic components in the DGP and in the auxiliary regression model which underlies the implementation of the Fractional Dickey-Fuller (FDF) test for I(1) against I(d) processes with d ∈ [0, 1). This is an important test in many economic applications because I(d) processess with d & 1 are mean-reverting although, when 0.5 ≤ d & 1,, like I(1) processes, they are nonstationary. We show how simple is the implementation of the FDF in these situations, and argue that it has better properties than LM tests. A simple testing strategy entailing only asymptotically normally distributed tests is also proposed. Finally, an empirical application is provided where the FDF test allowing for deterministic components is used to test for long-memory in the per capita GDP of several OECD countries, an issue that has important consequences to discriminate between growth theories, and on which there is some controversy.
Resumo:
Theory predicts that temporal variability plays an important role in the evolution of life histories, but empirical studies evaluating this prediction are rare. In constant environments, fitness can be measured by the population growth rate lambda, and the sensitivity of lambda to changes in fitness components estimates selection on these traits. In variable environments, fitness is measured by the stochastic growth rate lambda(S), and stochastic sensitivities estimate selection pressure. Here we examine age-specific schedules for reproduction and survival in a barn owl population (Tyto alba). We estimated how temporal variability affected fitness and selection, accounting for sampling variance. Despite large sample sizes of old individuals, we found no strong evidence for senescence. The most variable fitness components were associated with reproduction. Survival was less variable. Stochastic simulations showed that the observed variation decreased fitness by about 30%, but the sensitivities of lambda and lambda(S) to changes in all fitness components were almost equal, suggesting that temporal variation had negligible effects on selection. We obtained these results despite high observed variability in the fitness components and relatively short generation time of the study organism, a situation in which temporal variability should be particularly important for natural selection and early senescence is expected.
Resumo:
Meta-analysis of genome-wide association studies (GWASs) has led to the discoveries of many common variants associated with complex human diseases. There is a growing recognition that identifying "causal" rare variants also requires large-scale meta-analysis. The fact that association tests with rare variants are performed at the gene level rather than at the variant level poses unprecedented challenges in the meta-analysis. First, different studies may adopt different gene-level tests, so the results are not compatible. Second, gene-level tests require multivariate statistics (i.e., components of the test statistic and their covariance matrix), which are difficult to obtain. To overcome these challenges, we propose to perform gene-level tests for rare variants by combining the results of single-variant analysis (i.e., p values of association tests and effect estimates) from participating studies. This simple strategy is possible because of an insight that multivariate statistics can be recovered from single-variant statistics, together with the correlation matrix of the single-variant test statistics, which can be estimated from one of the participating studies or from a publicly available database. We show both theoretically and numerically that the proposed meta-analysis approach provides accurate control of the type I error and is as powerful as joint analysis of individual participant data. This approach accommodates any disease phenotype and any study design and produces all commonly used gene-level tests. An application to the GWAS summary results of the Genetic Investigation of ANthropometric Traits (GIANT) consortium reveals rare and low-frequency variants associated with human height. The relevant software is freely available.