Modelling and Control of Freeway Traffic

This paper presents the most recent developments of the Simulator of Intelligent Transportation Systems (SITS). The SITS is based on a microscopic simulation approach to reproduce real traffic conditions in an urban or non-urban network. In order to analyse the quality of the microscopic traffic simulator SITS a benchmark test was performed. A dynamical analysis of several traffic phenomena, applying a new modelling formalism based on the embedding of statistics and Laplace transform, is then addressed. The paper presents also a new traffic control concept applied to a freeway traffic system.

Cascade Control of a Hexapod Robot

6th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Catania, Italy, 17-19 September

System Modeling and Control Through Fractional-Order Algorithms

The theory of fractional calculus goes back to the beginning of thr throry of differential calculus but its inherent complexity postponed the applications of the associated concepts. In the last decade the progress in the areas of chaos and fractals revealed subtle relationships with the fractional calculus leading to an increasing interest in the development of the new paradigm. In the area of automaticcontrol preliminary work has already been carried out but the proposed algorithms are restricted to the frequency domain. The paper discusses the design of fractional-order discrete-time controllers. The algorithms studied adopt the time domein, which makes them suited for z-transform analusis and discrete-time implementation. The performance of discrete-time fractional-order controllers with linear and non-linear systems is also investigated.

Chaotic Phenomena and Performance Optimization in the Trajectory Control of Redundant Manipulators

Redundant manipulators have some advantages when compared with classical arms because they allow the trajectory optimization, both on the free space and on the presence of abstacles, and the resolution of singularities. For this type of manipulators, several kinetic algorithms adopt generalized inverse matrices. In this line of thought, the generalized inverse control scheme is tested through several experiments that reveal the difficulties that often arise. Motivated by theseproblems this paper presents a new method that ptimizes the manipulability through a least squre polynomialapproximation to determine the joints positions. Moreover, the article studies influence on the dynamics, when controlling redundant and hyper-redundant manipulators. The experiment confirm the superior performance of the proposed algorithm for redundant and hyper-redundant manipulators, revealing several fundamental properties of the chaotic phenomena, and gives a deeper insight towards the future development of superior trajectory control algorithms.

Ball Sensing in a Leg Like Robotic Kicker

The trend to have more cooperative play and the increase of game dynamics in Robocup MSL League motivates the improvement of skills for ball passing and reception. Currently the majority of the MSL teams uses ball handling devices with rollers to have more precise kicks but limiting the capability to kick a moving ball without stopping it and grabbing it. This paper addresses the problem to receive and kick a fast moving ball without having to grab it with a roller based ball handling device. Here, the main difficulty is the high latency and low rate of the measurements of the ball sensing systems, based in vision or laser scanner sensors.Our robots use a geared leg coupled to a motor that acts simultaneously as the kicking device and low level ball sensor. This paper proposes a new method to improve the capability for ball sensing in the kicker, by combining high rate measurements from the torque and energy in the motor and angular position of the kicker leg. The developed method endows the kicker device with an effective ball detection ability, validated in several game situations like in an interception to a fast pass or when chasing the ball where the relative speed from robot to ball is low. This can be used to optimize the kick instant or by the embedded kicker control system to absorb the ball energy.

Neural control of an autonomous robot

This article aims to apply the concepts associated with artificial neural networks (ANN) in the control of an autonomous robot system that is intended to be used in competitions of robots. The robot was tested in several arbitrary paths in order to verify its effectiveness. The results show that the robot performed the tasks with success. Moreover, in the case of arbitrary paths the ANN control outperforms other methodologies, such as fuzzy logic control (FLC).

Formation Control Driven by Cooperative Object Tracking

In this paper we introduce a formation control loop that maximizes the performance of the cooperative perception of a tracked target by a team of mobile robots, while maintaining the team in formation, with a dynamically adjustable geometry which is a function of the quality of the target perception by the team. In the formation control loop, the controller module is a distributed non-linear model predictive controller and the estimator module fuses local estimates of the target state, obtained by a particle filter at each robot. The two modules and their integration are described in detail, including a real-time database associated to a wireless communication protocol that facilitates the exchange of state data while reducing collisions among team members. Simulation and real robot results for indoor and outdoor teams of different robots are presented. The results highlight how our method successfully enables a team of homogeneous robots to minimize the total uncertainty of the tracked target cooperative estimate while complying with performance criteria such as keeping a pre-set distance between the teammates and the target, avoiding collisions with teammates and/or surrounding obstacles.

Visceral leishmaniasis in Brazil: revisiting paradigms of epidemiology and control

In the last 20 years, despite the known underestimation of cases, Brazil registered a marked increase in the incidence of visceral leishmaniasis. The main goal of this review is to reflect on some aspects of this zoonosis in Brazil and also to encourage the discussion in order to find more viable, effective and affordable strategies to be implemented by the Brazilian Leishmaniasis Control Program. The current situation of visceral leishmaniasis in Brazil might be seen as a paradox: the most important aspects of the disease are known, but so far the control of this disease has not yet been achieved. The current control strategies have not been able to prevent the geographical expansion, and even a rise in the incidence and lethality of visceral leishmaniasis. There is a need not only for a better definition of priority areas, but also for the implementation of a fieldwork monitoring system to the disease surveillance that could permit a further evaluation of the control program in areas where visceral leishmaniasis is endemic.

Mass treatment for intestinal helminthisis control in an Amazonian endemic area in Brazil

The objective of the present study was to estimate the prevalence of soil-transmitted helminthiasis and evaluate the sanitary conditions and the role of a mass treatment campaign for control of these infections in Santa Isabel do Rio Negro. A cross-sectional survey was carried out in 2002, to obtain data related to the sanitary conditions of the population and fecal samples for parasitological examination in 308 individuals, followed by a mass treatment with albendazole or mebendazole with coverage of 83% of the city population in 2003. A new survey was carried out in 2004, involving 214 individuals, for comparison of the prevalences of intestinal parasitosis before and after the mass treatment. The prevalences of ascariasis, trichuriasis and hookworm infection were 48%; 27% and 21% respectively in 2002. There was a significant decrease for the frequency of infections by Ascaris lumbricoides (p < 0.05; OR / 95% CI = 0.44 / 0.30 - 0.65), Trichuris trichiura (p < 0.05; OR / 95% CI = 0.37 / 0.22 - 0.62), hookworm (p < 0.05; OR / 95% CI = 0.03 / 0.01 - 0.15) and helminth poliparasitism (p < 0.05; OR / 95% CI = 0.16 / 0.08 - 0.32). It was also noticed a decrease of prevalence of infection by Entamoeba histolytica / dispar (p < 0.05; OR / 95% CI = 0.30 / 0.19 - 0.49) and non-pathogenic amoebas. It was inferred that a mass treatment can contribute to the control of soil-transmitted helminthiasis as a practicable short-dated measure. However, governmental plans for public health, education and urban infrastructure are essential for the sustained reduction of prevalences of those infections.

Relatório de Estágio: Análise da eficiência do Sistema de controlo de tráfego da cidade do Porto

No âmbito da unidade curricular Dissertação/Estágio/Projeto, foi desenvolvido, durante um estágio na Câmara Municipal do Porto, o estudo da eficiência do sistema inteligente de controlo de tráfego implementado na cidade. Este sistema é designado como Sistema Inteligente de Gestão Autónoma - SIGA e tem como base de funcionamento o software de gestão de tráfego GERTRUDE da empresa GERTRUDE SAEM. O sistema de controlo de tráfego encontra-se repartido em 10 zonas interligadas, focadas essencialmente no centro da cidade do Porto. O estudo foi aplicado apenas a uma parte da zona da Constituição, nomeadamente a rua da Constituição, desde a Praça Marquês até à rua Antero de Quental. A eficiência mediu-se pela comparação de duas situações, a circulação e comportamento das correntes de tráfego com o sistema em funcionamento normal e com o sistema desativado. Por sua vez, o indicador utilizado que permitiu avaliar o sistema, foi o nível de serviço obtido pelo atraso médio por veículo em cada ramo de cada interseção. Para determinação do atraso, foram testados diferentes métodos, para se tentar perceber qual aquele que melhor se adequava à situação e que exigia menor número de recursos humanos. À frente serão exaradas algumas conclusões acerca da metodologia de cada um deles e condicionantes que levaram à não utilização de todos os métodos. Depois de aplicadas as metodologias que permitiram determinar o nível de serviço em cada grupo semafórico das diferentes interseções, percebeu-se que existe uma grande diferença na circulação entre as duas situações, sendo que a mais-valia que este sistema apresenta é a coordenação das diferentes interseções que se encontram abrangidas pelas 10 zonas pertencentes ao SIGA.

Optimização do Processo de Maquinagem de Componentes para a Indústria Automóvel

A indústria automóvel exige, em geral, elevados índices de produtividade e qualidade. Para corresponder às exigências deste tipo de indústria, são requeridos métodos avançados de produção, tentando eliminar ao máximo operações que não gerem valor acrescentado e que possam introduzir problemas no processo de garantia da qualidade. A maquinagem por arranque de apara é um processo utilizado de forma intensiva na indústria automóvel. No entanto, enquanto em componentes críticos como o motor, os processos estão já altamente otimizados, o mesmo não se verifica na maior parte dos sistemas periféricos, normalmente realizados por empresas mais pequenas que gravitam em torno dos principais fornecedores da cadeia de produção de automóveis. Os sistemas responsáveis pela movimentação dos limpa pára-brisas e elevação dos vidros, entre outros, encontram-se neste grupo. Este trabalho visa essencialmente otimizar o processo de maquinagem de componentes periféricos de automóveis, sujeitos a diferentes operações em vários planos. No entanto, e tal como em muitas outras situações relacionadas com a variedade de versões existentes na indústria automóvel relativamente a cada sistema, pretende-se que o processo seja suficientemente versátil para poder ser aplicado em vários componentes de uma mesma família de produtos, necessitando de um número de ajustes o mais baixo possível. O estudo passou por uma análise profunda das similaridades geométricas dos diferentes componentes, análise dos planos de maquinagem de cada componente, operações envolvidas, elencagem da necessidade específica de ferramentas, elaboração de gabaritos de fabrico e apresentação da solução final, a qual passa pela introdução de um 4º eixo e do seu controlo através do sistema CNC já existente, assim como pela elaboração de novos programas.

Successful control program to implement the appropriate antibiotic prophylaxis for cesarean section

OBJECTIVE: Describe implementation of a successful program to reduce doses (cefazolin 2 to 1 g) used for antimicrobial prophylaxis. METHODS: Evaluation of an intervention program to reduce prophylactic antimicrobial doses. The intervention included weekly staff discussions, automatic dispensation of 1g-vial of cefazolin by the pharmacy unless expressly requested by surgeon and increase in post-discharge surveillance as a strategy to reassure surgeons of the safety of the reduction. In the pre and post intervention periods, a prospective study of antimicrobial consumption and surgical site infections were measured. RESULTS: There were 5,164 and 5,204 deliveries in 2001-2002 and 2003-2004, respectively; 1,524 (29.5%) and 1,363 (26%) were cesarean sections. There was a 45% decrease in cefazolin vials used on average per cesarean section (2.29 to 1.25). Patients evaluated increased from 16% to 67% and the SSI rates in both periods were 3.34% to 2.42%, respectively. CONCLUSION: An ample intervention, including administrative and educational measures, led to high compliance with dose reduction and saved more than US$4,000 in cefazolin, considered important because government reimbursement in Brazil for cesarean section is $80.

Potential of biologically active plant oils to control mosquito larvae (Culex pipiens, Diptera: Culicidae) from an egyptian locality

The insecticidal effect of six commercially available plant oils was tested against 4th larval instars of Culex pipiens. Larvae were originally collected from Meit El-Attar, Qalyubia Governorate, Egypt, and then reared in the laboratory until F1 generation. The LC50 values were 32.42, 47.17, 71.37, 83.36, 86.06, and 152.94 ppm for fenugreek (Trigonella foenum-grecum), earth almond (Cyperus esculentus), mustard (Brassica compestris), olibanum (Boswellia serrata), rocket (Eruca sativa), and parsley (Carum ptroselinum), respectively. The tested oils altered some biological aspects of C. pipiens, for instance, developmental periods, pupation rates, and adult emergences. The lowest concentrations of olibanum and fenugreek oils caused remarkable prolongation of larval and pupal durations. Data also showed that the increase of concentrations was directly proportional to reduction in pupation rates and adult emergences. Remarkable decrease in pupation rate was achieved by mustard oil at 1000 ppm. Adult emergence was suppressed by earth almond and fenugreek oils at 25 ppm. In addition, the tested plant oils exhibited various morphological abnormalities on larvae, pupae, and adult stages. Consequently, fenugreek was the most potent oil and the major cause of malformation of both larval and pupal stages. Potency of the applied plant oils provided an excellent potential for controlling C. pipiens.

Influence of Prolonged Wearing of Unstable Shoes on Upright Standing Postural Control

Objective: To study the influence of prolonged wearing of unstable shoes on standing postural control in prolonged standing workers. Methods: The participants were divided into two groups: one wore unstable shoes while the other wore conventional shoes for 8 weeks. Stabilometry parameters related to centre of pressure (CoP), rambling (RM) and trembling (TR) as well as the total agonist/antagonist muscle activity, antagonist co-activation and reciprocal activation were evaluated during upright standing, before and after the 8 week period. In both moments, the subjects were evaluated wearing the unstable shoes and in barefoot. Results: The unstable shoe condition presented increased CoP displacement related variables and decreased co-activation command compared to barefoot before and after the intervention. The prolonged wearing of unstable shoes led to: (1) reduction of medial-lateral CoP root mean square and area; (2) decreased anteroposterior RM displacement; (3) increased anteroposterior RM mean velocity and mediolateral RM displacement; (4) decreased anteroposterior TR RMS; and (5) increased thigh antagonist co-activation in the unstable shoe condition. Conclusion: The unstable shoe condition is associated to a higher destabilizing effect that leads to a selection of more efficient and accurate postural commands compared to barefoot. Prolonged wearing of unstable shoes provides increased effectiveness and performance of the postural control system, while wearing of unstable shoes in upright standing, that are reflected by changes in CoP related variables and by a reorganization of postural control commands.