Aluminas macro-mesoporosas produzidas pelo método sol-gel para aplicação em catálise heterogênea

Pós-graduação em Química - IQ

Trehalose and a calcium chelator for ram semen cryopreservation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alterações nuricionais em casca e polpa de cenoura decorrentes de diferentes métodos de cozimento

The aim of this study was to verify the carrot cooking most suitable method to minimize nutrient losses. Carrot peel slices were subjected to pre cooking tests that were initiated with 0.5 min of duration and then increased in 0.5 min successively. The carrot pieces texture was monitored during the pre tests so all would havethe same texture independent of the type of cooking. The degree of softennes was evaluated by pressuring the pieces between the toes. The carrot pulp and pell were subjected to four types of heat treatment (pressure, immersion, microwave, and steam), after that they were pounded with a food processor and stored at -18 ºC. The nutritional analyses were as follow: The evalu determination of proteins, lipids, fibers, sugars reducers, total of ascorbic acid content and minerals (iron, calcium, zinc, magnesium, potassium, phosphorus, and calcium). The analyses were accomplished with fresh carrot and after cooking with the different methods. The peel of the carrot presented as amounts of proteins, lipids, fibers percentages, sugars reducers, total and ascorbic acid content equivalent to the pulp. In addition, the minerals content was superior in the peel in relation to the pulp, presenting respective percentages of 38,10%, 95,12%, 47,04%, 58,88%, 70,27% and 21,27%. There were nutrient losses in relation to the raw vegetable, when the carrot pieces were submitted to the different cooking methods. The methods of steaming and microwave had lower nutritional losses.

Aproveitamento energético de uma planta de sulfatação

Pós-graduação em Engenharia Mecânica - FEG

Análise de oportunidades de poligeração em edificações e cidades

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Processamento térmico e estádio fenológico na atividade antioxidante do jambu

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ethanol and Water Adsorption on Close-Packed 3d, 4d, and 5d Transition-Metal Surfaces: A Density Functional Theory Investigation with van der Waals Correction

Nowadays, there is a great interest in the economic success of direct ethanol fuel cells; however, our atomistic understanding of the designing of stable and low-cost catalysts for the steam reforming of ethanol is still far from satisfactory, in particular due to the large number of undesirable intermediates. In this study, we will report a first-principles investigation of the adsorption properties of ethanol and water at low coverage on close-packed transition-metal (TM) surfaces, namely, Fe(110), Co(0001), Ni(111), Cu(111), Ru(0001), Rh(111), Pd(111), Ag(111), Os(0001), Ir(111), Pt(111), and Au(111), employing density functional theory (DFT) calculations. We employed the generalized gradient approximation with the formulation proposed by Perdew, Burke, and Erzenholf (PBE) to the exchange correlation functional and the empirical correction proposed by S. Grimme (DFT+D3) for the van der Waals correction. We found that both adsorbates binds preferentially near or on the on top sites of the TM surfaces through the 0 atoms. The PBE adsorption energies of ethanol and water decreases almost linearly with the increased occupation of the 4d and 5d d-band, while there is a deviation for the 3d systems. The van der Waals correction affects the linear behavior and increases the adsorption energy for both adsorbates, which is expected as the van der Waals energy due to the correlation effects is strongly underestimated by DFT-PBE for weak interacting systems. The geometric parameters for water/TM are not affected by the van der Waals correction, i.e., both DFT and DFT+D3 yield an almost parallel orientation for water on the TM surfaces; however, DFT+D3 changes drastically the ethanol orientation. For example, DFT yields an almost perpendicular orientation of the C-C bond to the TM surface, while the C-C bond is almost parallel to the surface using DFT +D3 for all systems, except for ethanol/Fe(110). Thus, the van der Waals correction decreases the distance of the C atoms to the TM surfaces, which might contribute to break the C-C bond. The work function decreases upon the adsorption of ethanol and water, and both follow the same trends, however, with different magnitude (larger for ethanol/TM) due to the weak binding of water to the surface. The electron density increases mainly in the region between the topmost layer and the adsorbates, which explains the reduction of the substrate work function.

EVALUATION OF MICROBIAL GROWTH ON SINGLE-USE VITRECTOMY PROBES REPROCESSED IN HEALTHCARE PRACTICE

The aim of this study was to evaluate the microbial growth on single-use vitrectomy probes reprocessed in healthcare practice. We investigated nine vitrectomy probes that had been reused and reprocessed using different methods. The samples were sectioned, individually, in portions of 3.5 cm, totaling 979 sampling units (extensions, connectors and vitrectomy cutters), which were inoculated in culture medium and incubated at 37 C for 14 days. The results showed microbial growth on 57 (5.8%) sample units, 25 of which had been sterilized using ethylene oxide, 16 by hydrogen peroxide plasma, and 16 by low-temperature steam and formaldehyde. Seventeen microbial species were identified. The most prevalent were: Micrococcus spp., coagulase-negative Staphylococcus, Pseudomonas spp., and Bacillus subtilis. The reuse of single-use vitrectomy probes was shown to be unsafe, therefore this practice is not recommended.

Production of xylanase and beta-xylosidase from autohydrolysis liquor of corncob using two fungal strains

Agroindustrial residues are materials often rich in cellulose and hemicellulose. The use of these substrates for the microbial production of enzymes of industrial interest is mainly due to their high availability associated with their low cost. In this work, corncob (CCs) particles decomposed to soluble compounds (liquor) were incorporated in the microbial growth medium through autohydrolysis, as a strategy to increase and undervalue xylanase and beta-xylosidase production by Aspergillus terricola and Aspergillus ochraceus. The CCs autohydrolysis liquor produced at 200 A degrees C for 5, 15, 30 or 50 min was used as the sole carbon source or associated with untreated CC. The best condition for enzyme synthesis was observed with CCs submitted to 30 min of autohydrolysis. The enzymatic production with untreated CCs plus CC liquor was higher than with birchwood xylan for both microorganisms. A. terricola produced 750 total U of xylanase (144 h cultivation) and 30 total U of beta-xylosidase (96-168 h) with 0.75% untreated CCs and 6% CCs liquor, against 650 total U of xylanase and 2 total U of beta-xylosidase in xylan; A. ochraceus produced 605 total U of xylanase and 56 total U of beta-xylosidase (168 h cultivation) with 1% untreated CCs and 10% CCs liquor against 400 total U of xylanase and 38 total U of beta-xylosidase in xylan. These results indicate that the treatment of agroindustrial wastes through autohydrolysis can be a viable strategy in the production of high levels of xylanolytic enzymes.

Efeito da adição de lantânio em catalisadores de Ni/ZrO2 aplicados na reação de reforma a vapor de etanol

The catalytic performance of Ni/ZrO2 catalysts loaded with different lanthanum content for steam reforming of ethanol was investigated. Catalysts were characterized by BET surface area, X-ray diffraction, UV-vis spectroscopy, temperature programmed reduction, and X-ray absorption fine structure techniques. Results showed that lanthanum addition led to an increase in the degree of reduction of both NiO and nickel surface species interacting with the support, due to the higher dispersion effect. The best catalytic performance at 450 ºC was found for the Ni/12LZ catalyst, which exhibited an effluent gaseous mixture with the highest H2 yield.

The capability of endophytic fungi for production of hemicellulases and related enzymes

Abstract Background There is an imperative necessity for alternative sources of energy able to reduce the world dependence of fossil oil. One of the most successful options is ethanol obtained mainly from sugarcane and corn fermentation. The foremost residue from sugarcane industry is the bagasse, a rich lignocellulosic raw material uses for the production of ethanol second generation (2G). New cellulolytic and hemicellulytic enzymes are needed, in order to optimize the degradation of bagasse and production of ethanol 2G. Results The ability to produce hemicellulases and related enzymes, suitable for lignocellulosic biomass deconstruction, was explored using 110 endophytic fungi and 9 fungi isolated from spoiled books in Brazil. Two initial selections were performed, one employing the esculin gel diffusion assay, and the other by culturing on agar plate media with beechwood xylan and liquor from the hydrothermal pretreatment of sugar cane bagasse. A total of 56 isolates were then grown at 29°C on steam-exploded delignified sugar cane bagasse (DEB) plus soybean bran (SB) (3:1), with measurement of the xylanase, pectinase, β-glucosidase, CMCase, and FPase activities. Twelve strains were selected, and their enzyme extracts were assessed using different substrates. Finally, the best six strains were grown under xylan and pectin, and several glycohydrolases activities were also assessed. These strains were identified morphologically and by sequencing the internal transcribed spacer (ITS) regions and the partial β-tubulin gene (BT2). The best six strains were identified as Aspergillus niger DR02, Trichoderma atroviride DR17 and DR19, Alternaria sp. DR45, Annulohypoxylon stigyum DR47 and Talaromyces wortmannii DR49. These strains produced glycohydrolases with different profiles, and production was highly influenced by the carbon sources in the media. Conclusions The selected endophytic fungi Aspergillus niger DR02, Trichoderma atroviride DR17 and DR19, Alternaria sp. DR45, Annulohypoxylon stigyum DR47 and Talaromyces wortmannii DR49 are excellent producers of hydrolytic enzymes to be used as part of blends to decompose sugarcane biomass at industrial level.

The capability of endophytic fungi for production of hemicellulases and related enzymes

Abstract BACKGROUND: There is an imperative necessity for alternative sources of energy able to reduce the world dependence of fossil oil. One of the most successful options is ethanol obtained mainly from sugarcane and corn fermentation. The foremost residue from sugarcane industry is the bagasse, a rich lignocellulosic raw material uses for the production of ethanol second generation (2G). New cellulolytic and hemicellulytic enzymes are needed, in order to optimize the degradation of bagasse and production of ethanol 2G. RESULTS: The ability to produce hemicellulases and related enzymes, suitable for lignocellulosic biomass deconstruction, was explored using 110 endophytic fungi and 9 fungi isolated from spoiled books in Brazil. Two initial selections were performed, one employing the esculin gel diffusion assay, and the other by culturing on agar plate media with beechwood xylan and liquor from the hydrothermal pretreatment of sugar cane bagasse. A total of 56 isolates were then grown at 29°C on steam-exploded delignified sugar cane bagasse (DEB) plus soybean bran (SB) (3:1), with measurement of the xylanase, pectinase, β-glucosidase, CMCase, and FPase activities. Twelve strains were selected, and their enzyme extracts were assessed using different substrates. Finally, the best six strains were grown under xylan and pectin, and several glycohydrolases activities were also assessed. These strains were identified morphologically and by sequencing the internal transcribed spacer (ITS) regions and the partial β-tubulin gene (BT2). The best six strains were identified as Aspergillus niger DR02, Trichoderma atroviride DR17 and DR19, Alternaria sp. DR45, Annulohypoxylon stigyum DR47 and Talaromyces wortmannii DR49. These strains produced glycohydrolases with different profiles, and production was highly influenced by the carbon sources in the media. CONCLUSIONS: The selected endophytic fungi Aspergillus niger DR02, Trichoderma atroviride DR17 and DR19, Alternaria sp. DR45, Annulohypoxylon stigyum DR47 and Talaromyces wortmannii DR49 are excellent producers of hydrolytic enzymes to be used as part of blends to decompose sugarcane biomass at industrial level.

Desarrollo de videojuegos en 2D usando Simple DirectMedia

[ES]Los Indie games, o videojuegos independientes, son aplicaciones creadas por individuos o pequeños grupos sin apoyo financiero de distribuidores. A menudo se centran en la innovación, y se basan en la distribución digital. En los últimos años han visto un gran aumento principalmente debido a; nuevos métodos de distribución en línea (Steam Greenlight1, Xbox Live2, Playstation Store3, Android Market, Apple Store), nuevas formas de financiación como Kickstarter4 y potentes herramientas gratuitas para el desarrollo. Este proyecto se puede considerar como uno de los primeros pasos en el desarrollo de videojuegos independientes o Indie. Usando SDL como base se pretende diseñar y desarrollar dos prototipos de videojuego, el primero será un clon del conocido Tetris, aprovechando la poca complejidad de las mecánicas del juego para tener un primer contacto con las herramientas. El segundo, de mayor complejidad, se centrará en desarrollar las principales características de un juego tipo plataformas en 2D, del estilo Super Mario, Sonic o los anteriormente mencionados Super Meat Boy y Braid. La Simple DirectMedia Layer (SDL) es un conjunto de bibliotecas desarrolladas en el lenguaje de programación C, que proporcionan funciones básicas para realizar operaciones de dibujo en dos dimensiones, gestión de efectos de sonido y música, además de carga y gestión de imágenes. Fueron desarrolladas inicialmente por Sam Lantinga en 1998, en este proyecto se ha usado la versión 1.2.15 y se espera que este año se termine la versión 2.0, el uno de Junio de este año ha alcanzado el estado Release Candidate.

Catalysts for H2 production

The research of new catalysts for the hydrogen production described in this thesis was inserted within a collaboration of Department of Industrial Chemistry and Materials of University of Bologna and Air Liquide (Centre de Recherche Claude-Delorme, Paris). The aim of the work was focused on the study of new materials, active and stable in the hydrogen production from methane, using either a new process, the catalytic partial oxidation (CPO), or a enhanced well-established process, the steam methane reforming (SMR). Two types of catalytic materials were examined: 1) Bulk catalysts, i.e. non-supported materials, in which the active metals (Ni and/or Rh) are stabilized inside oxidic matrix, obtained from perovskite type compounds (PVK) and from hydrotalcite type precursors (HT); 2) Structured catalysts, i.e. catalysts supported on materials having high thermal conductivity (SiC and metallic foams). As regards the catalytic partial oxidation, the effect of the metal (Ni and/or Rh), the role of the metal/matrix ratio and the matrix formulation of innovative catalysts obtained from hydrotalcite type precursors and from perovskites were examined. In addition, about steam reforming process, the study was carried out first on commercial type catalysts, examining the deactivation in industrial conditions, the role of the operating conditions and the activity of different type of catalysts. Then, innovative materials bulk (PVK and HT) and structured catalysts (SiC and metallic foam) were studied and a new preparation method was developed.

Produzione di bioetanolo da scarti lignocellulosici della canna da zucchero: condizioni di saccarificazione e fermentazione simultanee (SSF) e aspetti ambientali del processo

Il presente studio ha avuto l’obiettivo di indagare la produzione di bioetanolo di seconda generazione a partire dagli scarti lignocellulosici della canna da zucchero (bagassa), facendo riscorso al processo enzimatico. L’attività di ricerca è stata svolta presso il Dipartimento di Ingegneria Chimica dell’Università di Lund (Svezia) all’interno di rapporti scambio con l’Università di Bologna. Il principale scopo è consistito nel valutare la produzione di etanolo in funzione delle condizioni operative con cui è stata condotta la saccarificazione e fermentazione enzimatica (SSF) della bagassa, materia prima che è stata sottoposta al pretrattamento di Steam Explosion (STEX) con aggiunta di SO2 come catalizzatore acido. Successivamente, i dati ottenuti in laboratorio dalla SSF sono stati utilizzati per implementare, in ambiente AspenPlus®, il flowsheet di un impianto che simula tutti gli aspetti della produzione di etanolo, al fine di studiarne il rendimento energetico dell’intero processo. La produzione di combustibili alternativi alle fonti fossili oggigiorno riveste primaria importanza sia nella limitazione dell’effetto serra sia nel minimizzare gli effetti di shock geopolitici sulle forniture strategiche di un Paese. Il settore dei trasporti in continua crescita, consuma nei paesi industrializzati circa un terzo del fabbisogno di fonti fossili. In questo contesto la produzione di bioetanolo può portare benefici per sia per l’ambiente che per l’economia qualora valutazioni del ciclo di vita del combustibile ne certifichino l’efficacia energetica e il potenziale di mitigazione dell’effetto serra. Numerosi studi mettono in risalto i pregi ambientali del bioetanolo, tuttavia è opportuno fare distinzioni sul processo di produzione e sul materiale di partenza utilizzato per comprendere appieno le reali potenzialità del sistema well-to-wheel del biocombustibile. Il bioetanolo di prima generazione ottenuto dalla trasformazione dell’amido (mais) e delle melasse (barbabietola e canna da zucchero) ha mostrato diversi svantaggi: primo, per via della competizione tra l’industria alimentare e dei biocarburanti, in secondo luogo poiché le sole piantagioni non hanno la potenzialità di soddisfare domande crescenti di bioetanolo. In aggiunta sono state mostrate forti perplessità in merito alla efficienza energetica e del ciclo di vita del bioetanolo da mais, da cui si ottiene quasi la metà della produzione di mondiale di etanolo (27 G litri/anno). L’utilizzo di materiali lignocellulosici come scarti agricolturali e dell’industria forestale, rifiuti urbani, softwood e hardwood, al contrario delle precedenti colture, non presentano gli svantaggi sopra menzionati e per tale motivo il bioetanolo prodotto dalla lignocellulosa viene denominato di seconda generazione. Tuttavia i metodi per produrlo risultano più complessi rispetto ai precedenti per via della difficoltà di rendere biodisponibili gli zuccheri contenuti nella lignocellulosa; per tale motivo è richiesto sia un pretrattamento che l’idrolisi enzimatica. La bagassa è un substrato ottimale per la produzione di bioetanolo di seconda generazione in quanto è disponibile in grandi quantità e ha già mostrato buone rese in etanolo se sottoposta a SSF. La bagassa tal quale è stata inizialmente essiccata all’aria e il contenuto d’acqua corretto al 60%; successivamente è stata posta a contatto per 30 minuti col catalizzatore acido SO2 (2%), al termine dei quali è stata pretrattata nel reattore STEX (10L, 200°C e 5 minuti) in 6 lotti da 1.638kg su peso umido. Lo slurry ottenuto è stato sottoposto a SSF batch (35°C e pH 5) utilizzando enzimi cellulolitici per l’idrolisi e lievito di birra ordinario (Saccharomyces cerevisiae) come consorzio microbico per la fermentazione. Un obiettivo della indagine è stato studiare il rendimento della SSF variando il medium di nutrienti, la concentrazione dei solidi (WIS 5%, 7.5%, 10%) e il carico di zuccheri. Dai risultati è emersa sia una buona attività enzimatica di depolimerizzazione della cellulosa che un elevato rendimento di fermentazione, anche per via della bassa concentrazione di inibitori prodotti nello stadio di pretrattamento come acido acetico, furfuraldeide e HMF. Tuttavia la concentrazione di etanolo raggiunta non è stata valutata sufficientemente alta per condurre a scala pilota un eventuale distillazione con bassi costi energetici. Pertanto, sono stati condotti ulteriori esperimenti SSF batch con addizione di melassa da barbabietola (Beta vulgaris), studiandone preventivamente i rendimenti attraverso fermentazioni alle stesse condizioni della SSF. I risultati ottenuti hanno suggerito che con ulteriori accorgimenti si potranno raggiungere gli obiettivi preposti. E’ stato inoltre indagato il rendimento energetico del processo di produzione di bioetanolo mediante SSF di bagassa con aggiunta di melassa in funzione delle variabili più significative. Per la modellazione si è fatto ricorso al software AspenPlus®, conducendo l’analisi di sensitività del mix energetico in uscita dall’impianto al variare del rendimento di SSF e dell’addizione di saccarosio. Dalle simulazioni è emerso che, al netto del fabbisogno entalpico di autosostentamento, l’efficienza energetica del processo varia tra 0.20 e 0.53 a seconda delle condizioni; inoltre, è stata costruita la curva dei costi energetici di distillazione per litro di etanolo prodotto in funzione delle concentrazioni di etanolo in uscita dalla fermentazione. Infine sono già stati individuati fattori su cui è possibile agire per ottenere ulteriori miglioramenti sia in laboratorio che nella modellazione di processo e, di conseguenza, produrre con alta efficienza energetica bioetanolo ad elevato potenziale di mitigazione dell’effetto serra.