DEVELOPMENT OF PRECIPITATION HARDENABLE AL-SC-ZR-HF QUATERNARY ALLOYS THROUGH THERMODYNAMIC MODELING, AND ROOM-TEMPERATURE AND ELEVATED TEMPERATURE HARDNESS

Aluminum alloyed with small atomic fractions of Sc, Zr, and Hf has been shown to exhibit high temperature microstructural stability that may improve high temperature mechanical behavior. These quaternary alloys were designed using thermodynamic modeling to increase the volume fraction of precipitated tri-aluminide phases to improve thermal stability. When aged during a multi-step, isochronal heat treatment, two compositions showed a secondary room-temperature hardness peak up to 700 MPa at 450°C. Elevated temperature hardness profiles also indicated an increase in hardness from 200-300°C, attributed to the precipitation of Al3Sc, however, no secondary hardness response was observed from the Al3Zr or Al3Hf phases in this alloy.

Development of the Platysma Muscle and the Superficial Musculoaponeurotic System (Human Specimens at 8–17 Weeks of Development)

There is controversy regarding the description of the different regions of the face of the superficial musculoaponeurotic system (SMAS) and its relationship with the superficial mimetic muscles. The purpose of this study is to analyze the development of the platysma muscle and the SMAS in human specimens at 8–17 weeks of development using an optical microscope. Furthermore, we propose to study the relationship of the anlage of the SMAS and the neighbouring superficial mimetic muscles. The facial musculature derives from the mesenchyme of the second arch and migrates towards the different regions of the face while forming premuscular laminae. During the 8th week of development, the cervical, infraorbital, mandibular, and temporal laminae are observed to be on the same plane. The platysma muscle derives from the cervical lamina and its mandibular extension enclosing the lower part of the parotid region and the cheek, while the SMAS derives from the upper region. During the period of development analyzed in this study, we have observed no continuity between the anlage of the SMAS and that of the superficial layer of the temporal fascia and the zygomaticus major muscle. Nor have we observed any structure similar to the SMAS in the labial region.

Estructura superficial y procesos activos en el margen submarino del norte de La Española (República Dominicana): Resultados preliminares

El margen submarino del norte de La Española registra el proceso de colisión activa entre los Bancos de las Bahamas y el arco isla. Esta colisión ha producido numerosos terremotos causando cuantiosos daños en la costa norte de la isla. La campaña NORCARIBE (2013) combinó la adquisición sistemática de datos geofísicos de todo el margen subductivo, especialmente en la zona de República Dominicana, proporcionando una información continua y de alta resolución. Esta información ha permitido estudiar con detalle la variación transversal y longitudinal del margen subductivo caracterizado por la Fosa de la Española (FE) y el Cinturón Deformado Septentrional (CDS). Este margen compresivo presenta una estructura imbricada con vergencia hacia el norte y segmentada por zonas de transferencia limitando la longitud máxima de las fallas inversas. Existen numerosas evidencias de deformación activa que deben ser consideradas en futuros estudios sobre la evaluación de la peligrosidad sísmica y tsunamigénica en la región, así como para la evaluación de recursos marinos y la ordenación del territorio de la República Dominicana.

Revisão dos sistemas de classificação da qualidade superficial do betão à vista

Sendo o material de construção mais utilizado atualmente, o betão tem vindo a ser sucessivamente melhorado de modo a responder às crescentes exigências técnicas, estéticas, funcionais e ambientais impostas pelos projetistas no que toca à sua utilização. De entre estas exigências destaca-se a utilização de paramentos com elevado desempenho a nível estético de modo a corresponderem aos objetivos idealizados pela arquitetura. Desta forma, têm vindo a ser cada vez mais desenvolvidos os betões com elevado desempenho a nível arquitetónico, onde se englobam os betões à vista quer nas suas cores usuais – cinzento e branco - como os betões coloridos. A aplicação de betão à vista requer um grande conhecimento do material e do seu comportamento bem como das técnicas de fabrico e aplicação. Desta forma, e de modo a que se consiga um resultado final com elevada qualidade em termos visuais será necessária uma grande dose de cuidados durante todas as fases do processo construtivo. Nos últimos anos, as associações de fabricantes de betão e/ou de cofragem, têm tido um papel importante na definição de tópicos relacionados com o acabamento do betão à vista e realizaram um esforço para documentar e estabelecer critérios de classificação superficial do betão. Este artigo apresenta uma revisão dos sistemas de classificação da qualidade superficial do betão à vista

Temperatura superficial de bovinos considerando áreas com e sem a presença de pelos.

Nos últimos anos um grande número de estudos utilizando a análise de imagens termográficas de animais na faixa do infravermelho vem sendo realizado. Além dos avanços tecnológicos que tornaram os sensores mais acessíveis, a preocupação com o bem estar e ambiência das instalações animais tem fomentado a utilização desse método não invasivo e de fácil execução. Neste trabalho foram utilizados 20 bovinos das raças Nelore e Pantaneiro. Após tricotomia de uma área sobre o músculo Longissimus dorsi próximo da 13ª costela, seguida de repouso por 24 horas, os animais foram avaliados por três dias consecutivos, seis vezes por dia. Foram aferidas as temperaturas em áreas com e sem pelos com uso de câmera termográfica. O experimento foi realizado em um Delineamento Inteiramente Casualizado (DIC), considerando o efeito de raça. As variáveis temperatura sem pelo (TSP) e a diferença de temperatura entre áreas com e sem pelo (DIF) não apresentaram efeito significativo para raça. Por outro lado, para a temperatura em áreas com pelos(TCP) o efeito de raça foi significativo, com os pantaneiros apresentando as maiores médias. Animais de ambas as raças encontravam-se em condições de conforto térmico durante o experimento. Os resultados mostram a necessidade de se olhar com cautela para trabalhos envolvendo imagens termográficas capturadas em superfícies recobertas por pelos em animais. Como as avaliações foram feitas na sombra e só houve diferença significativa entre áreas com pelos, é possível que as temperaturas registradas com termografia infra vermelha na superfície da pelagem dos animais representem, pelo menos em parte, características termofísicas dos pelos que as compõem (como a capacidade térmica, por exemplo), sendo tais temperaturas pouco representativas para a superfície do corpo dos indivíduos propriamente, como é comum se considerar.

Mapeamento do potencial de infiltração e escoamento superficial da água para a microbacia do Córrego Espraiado - Ribeirão Preto, SP.

Este trabalho apresenta o procedimento adotado para a geração de um mapa descrevendo o potencial de infiltração e escoamento superficial da água a partir de informações de solo e declividade do terreno, utilizando um Sistema de Informação Geográfica - SIG. Este mapa e um passo intermediário de um método que vem sendo desenvolvido para a definição de áreas de risco de contaminação por agroquímicos, levando em consideração as propriedades dos produtos, características físicas locais e climáticas.

ACTIVIDAD SISMICA DE CARACTER SUPERFICIAL REGISTRADA POR LA RED SISMOGRÁFICA DEL OVSICORI-UNA EN LA HOJA DE SAN JOSE 1:200.000 ENTRE ABRIL 1984 - JULIO 1988

Este trabajo es el resultado del análisis de la información existente, registrada por el OVSICORI-UNA para la región del Valle Central de Costa Rica (Hoja San José, escala 1:200.000).  Históricamente el Valle Central ha sufrido por la acción de varios terremotos.  Entre los más dañinos podemos citar el de Cartago de 1841, el de Fraijanes de 1888, el de Cartago de 1910, el de Sarchí de 1912, el de Patillos de 1952 y el de los del Bajos del Toro en 1955.  Esta actividad asociada a fallas de carácter superficial (z 15 km) y con magnitudes moderadas mb 6.5, muy probablemente se volverá a presentar en el futuro, en igual forma en que se han visto afectada la ciudad de San Salvador en la hermana república de El Salvador.  Es, por lo tanto, de vital importancia investigar conocer y evaluar la existencia de las fallas que han ocasionado dichos terremotos. 

The mechanical strength of phosphates under friction-induced cross-linking

Purpose: In the present study, we consider mechanical properties of phosphate glasses under high temperatureinduced and under friction-induced cross-linking, which enhance the modulus of elasticity. Design/methodology/approach: Two nanomechanical properties are evaluated, the first parameter is the modulus of elasticity (E) (or Young's modulus) and the second parameter is the hardness (H). Zinc meta-, pyro - and orthophosphates were recognized as amorphous-colloidal nanoparticles were synthesized under laboratory conditions and showed antiwear properties in engine oil. Findings: Young's modulus of the phosphate glasses formed under high temperature was in the 60-89 GPa range. For phosphate tribofilm formed under friction hardness and the Young's modulus were in the range of 2-10 GPa and 40-215 GPa, respectively. The degree of cross-linking during friction is provided by internal pressure of about 600 MPa and temperature close to 1000°C enhancing mechanical properties by factor of 3 (see Fig 1). Research limitations/implications: The addition of iron or aluminum ions to phosphate glasses under high temperature - and friction-induced amorphization of zinc metaphosphate and pyrophosphate tends to provide more cross-linking and mechanically stronger structures. Iron and aluminum (FeO4 or AlO4 units), incorporated into phosphate structure as network formers, contribute to the anion network bonding by converting the P=O bonds into bridging oxygen. Future work should consider on development of new of materials prepared by solgel processes, eg., zinc (II)-silicic acid. Originality/value: This paper analyses the friction pressure-induced and temperature–induced the two factors lead phosphate tribofilm glasses to chemically advanced glass structures, which may enhance the wear inhibition. Adding the coordinating ions alters the pressure at which cross-linking occurs and increases the antiwear properties of the surface material significantly.

Perpetuating Racism: Legal Education, Race and Social Justice

By presenting the results of a content analysis of Australian undergraduate legal education, this paper examines the extent to which issues of race, ethnicity, discrimination, and multiculturalism feature within this component of the moral, ethical, and professional development of legal professionals. It will demonstrate that instead of encouraging a deep, critical and contextual understanding of such issues, legal education provides a relatively superficial one, which has important implications for the role that legal professionals play in overcoming injustices such as institutional racism, and the kinds of social reform that they are likely to undertake.

Fungal spore fragmentation as a function of airflow rates and fungal generation methods

The aim of this study was to characterise and quantify the fungal fragment propagules derived and released from several fungal species (Penicillium, Aspergillus niger and Cladosporium cladosporioides) using different generation methods and different air velocities over the colonies. Real time fungal spore fragmentation was investigated using an Ultraviolet Aerodynamic Particle Sizer (UVASP) and a Scanning Mobility Particle Sizer (SMPS). The study showed that there were significant differences (p < 0.01) in the fragmentation percentage between different air velocities for the three generation methods, namely the direct, the fan and the fungal spore source strength tester (FSSST) methods. The percentage of fragmentation also proved to be dependant on fungal species. The study found that there was no fragmentation for any of the fungal species at an air velocity ≤ 0.4 m/s for any method of generation. Fluorescent signals, as well as mathematical determination also showed that the fungal fragments were derived from spores. Correlation analysis showed that the number of released fragments measured by the UVAPS under controlled conditions can be predicted on the basis of the number of spores, for Penicillium and Aspergillus niger, but not for Cladosporium cladosporioides. The fluorescence percentage of fragment samples was found to be significantly different to that of non-fragment samples (p < 0.0001) and the fragment sample fluorescence was always less than that of the non-fragment samples. Size distribution and concentration of fungal fragment particles were investigated qualitatively and quantitatively, by both UVAPS and SMPS, and it was found that the UVAPS was more sensitive than the SMPS for measuring small sample concentrations, and the results obtained from the UVAPS and SMAS were not identical for the same samples.

Determining heavy vehicle suspension health from vibratory wheel loads

A low-cost test bed was made from a modified heavy vehicle (HV) brake tester. By rotating a test HV’s wheel on an eccentric roller, a known vibration was imparted to the wheel under test. A control case for dampers in good condition was compared with two test cases of ineffective shock absorbers. Measurement of the forces at the bearings of the roller provided an indication of the HV wheel-forces. Where the level of serviceability of the shock absorbers varied, differences in wheel load provided a quality indicator corresponding to a change of damper characteristic. Conclusions regarding the levels of damper maintenance beyond which HV suspensions cause road damage and dynamic wheel forces at the threshold of tyre wear at which HV shock absorbers are normally replaced are presented.

External pressure in the hardening of phosphate in tribofilm on iron surfaces

Purpose: In the present work we consider our (in progress) spectroscopy study of zinc and iron phosphates under the influence external high pressure to determine zinc ion change coordination from tetrahedral to octahedral (or hexahedral) structure.----- Design/methodology/approach: The standard equipment is the optical high pressure cell with diamond (DAC). The DAC is assembled and then vibrational or electronic spectra are collected by mounting the cell in an infrared, Raman, EXAFS or UV-visible spectrometer.----- Findings: Mechanism by which zinc and iron methaphosphate material is transformed to glassy meta-phosphate is enhancing mechanical properties of tribofilm. The two decades of intensive study demonstrates that Zn (II) and Fe (III) ions participate to cross-link network under friction, hardening the phosphate.----- Research limitations/implications: Transition metal atoms with d orbital have flexible coordination numbers, for example zinc acts as a cross-linking agent increasing hardness, by changing coordination from tetrahedral to octahedral. Perhaps the external pressure effect on the [Zn–(O-P-)4 ] complex causes a transformation to an [Zn –(O-P-)6] grouping.----- Originality/value: This paper analyses high-pressure spectroscopy which has been applied for the investigation of 3D transition metal ions in solids. When studying pressure effects on coordination compounds structure, we can expect changes in ground electronic state (spin-crossovers), electronic spectra due to structural distortions (piezochromism), and changes in the ligand field causing shifts in the electronic transitions.

In vivo confocal microscopy of the palpebral conjunctiva and tarsal plate

Purpose The aim of this work is to develop a more complete understanding of the in vivo histology of the human palpebral conjunctiva and tarsal plate. Methods. The upper eyelids of 11 healthy human volunteer subjects were everted, and laser scanning confocal microscopy was used to examine the various tissue layers of the palpebral conjunctiva and tarsal plate. Results The superficial and basal epithelial layers are composed of cells with gray cytoplasm and thick, light gray borders.Nuclei can not be seen. The stroma has a varied appearance; fibrous tissue is sometimes observed, interspersed with dark,amorphous lacunae, and crevases. Numerous single white or gray cells populate this tissue, and fine blood vessels are seen traversing the field. Occasional conjunctival microcysts and Langerhans cells are observed. The tarsal plate is dark and amorphous, and meibomian gland acini with convoluted borders are clearly observed. Acini are composed of an outer lining of large cuboidal cells, and differentiated secretory cells can be seen within the acini lumen. Conclusions Laser scanning confocal microscopy is capable of studying the human palpebral conjunctiva, tarsal plate, and acini of meibomian glands in vivo. The observations presented here may provide useful supplementary anatomical information relating to the morphology of this tissue.