Failure of thick-skinned stiffener runout sections loaded in uniaxial compression

Recent efforts towards the development of the next generation of large civil and military transport aircraft within the European community have provided new impetus for investigating the potential use of composite material in the primary structure. One concern in this development is the vulnerability of co-cured stiffened structures to through-thickness stresses at the skin-stiffener interfaces particularly in stiffener runout regions. These regions are an inevitable consequence of the requirement to terminate stiffeners at cutouts, rib intersections or other structural features which interrupt the stiffener load path. In this respect, thickerskinned components are more vulnerable than thin-skinned ones. This work presents an experimental and numerical study of the failure of thick-sectioned stiffener runout specimens loaded in uniaxial compression. The experiments revealed that failure was initiated at the edge of the runout and propagated across the skin-stiffener interface. High frictional forces at the edge of the runout were also deduced from a fractographic analysis and it is postulated that these forces may enhance the fracture toughness of the specimens. Finite element analysis using an efficient thick-shell element and the Virtual Crack Closure Technique was able to qualitatively predict the crack growth characteristics for each specimen

Development of a bovine collagen-apatitic calcium phosphate cement for potential fracture treatment through vertebroplasty

The aim of this study was to examine the potential of incorporating bovine fibres as a means of reinforcing a typically brittle apatite calcium phosphate cement for vertebroplasty. Type I collagen derived from bovine Achilles tendon was ground cryogenically to produce an average fibre length of 0.96 ± 0.55 mm and manually mixed into the powder phase of an apatite-based cement at 1, 3 or 5 wt.%. Fibre addition of up to 5 wt.% had a significant effect (P = 0.001) on the fracture toughness, which was increased by 172%. Adding =1 wt.% bovine collagen fibres did not compromise the compressive properties significantly, however, a decrease of 39-53% was demonstrated at =3 wt.% fibre loading. Adding bovine collagen to the calcium phosphate cement reduced the initial and final setting times to satisfy the clinical requirements stated for vertebroplasty. The cement viscosity increased in a linear manner (R = 0.975) with increased loading of collagen fibres, such that the injectability was found to be reduced by 83% at 5 wt.% collagen loading. This study suggests for the first time the potential application of a collagen-reinforced calcium phosphate cement as a viable option in the treatment of vertebral fractures, however, issues surrounding efficacious cement delivery need to be addressed. © 2012 Acta Materialia Inc.

Charity accountability in the UK: through the eyes of the donor

Purpose – The purpose of this paper is to explore accountability from the perspective of charity donors.

Design/methodology/approach – The research utilises semi-structured interviews with a range of donors. In addition, it summarises the main findings from key related research (that uses document content analysis and questionnaire surveys) as a basis for better appreciating donor engagement.

Findings – This research offers evidence that while donors are viewed as the key stakeholder to whom a charity should be accountable, the relevance of the information commonly disclosed in formal charity communications is questionable. This is viewed as significant in terms of small dependent donors, although less critical in the case of non-dependent large donors who have power to demand individualised information. However, although all donors do not particularly engage with these formal communications, they are viewed by them as having significance and their production and publication serves as an important legitimising tool in the sector (enhancing trust and reputation).

Research limitations/implications – This research is based on semi-structured interviews with individual small donors and large institutional donors to large UK charities and therefore any generalising of the conclusions beyond large charities, and beyond the UK, should be undertaken with care. In addition, it focuses solely on the perceptions of donors, and other stakeholder groups are also important in this process.

Originality/value – Despite the widespread acceptance that charities have a duty to discharge accountability to their stakeholders, there is limited knowledge of their information needs and whether the performance information currently being disclosed fulfils them. This study provides a unique insight into the perspective of a key stakeholder group (donors) with respect to accountability.

Diamond machining of silicon: A review of advances in molecular dynamics simulation

Molecular dynamics (MD) simulation has enhanced our understanding about ductile-regime machining of brittle materials such as silicon and germanium. In particular, MD simulation has helped understand the occurrence of brittle–ductile transition due to the high-pressure phase transformation (HPPT), which induces Herzfeld–Mott transition. In this paper, relevant MD simulation studies in conjunction with experimental studies are reviewed with a focus on (i) the importance of machining variables: undeformed chip thickness, feed rate, depth of cut, geometry of the cutting tool in influencing the state of the deviatoric stresses to cause HPPT in silicon, (ii) the influence of material properties: role of fracture toughness and hardness, crystal structure and anisotropy of the material, and (iii) phenomenological understanding of the wear of diamond cutting tools, which are all non-trivial for cost-effective manufacturing of silicon. The ongoing developmental work on potential energy functions is reviewed to identify opportunities for overcoming the current limitations of MD simulations. Potential research areas relating to how MD simulation might help improve existing manufacturing technologies are identified which may be of particular interest to early stage researchers.

‘Blessed are the young, for they shall inherit the national debt’: Solidarity between generations in the Irish crisis

Ireland has gained a reputation for peaceable acceptance of austerity following a European Union/International Monetary Fund bailout in 2010. While proponents of austerity praise Ireland’s stoicism, critics of global capitalism argue that individuals and families are paying for mistakes made by elites. However, little is known about the strategies people adopt to cope with cutbacks to welfare entitlements. Drawing on a study of solidarity between generations living in Ireland in 2011–12, this article explores the lived experience of economic crisis and austerity. One hundred interviews with people of all ages and socio-economic backgrounds are analysed using constructivist grounded theory. Data show how austerity impacts differentially according to socio-economic status. While solidarity between generations leads to re-distribution of resources within families, providing some security for people with access to family resources, it reinforces inequality at societal level. We conclude that reliance on family promotes ‘coping’ rather than ‘protesting’ responses to austerity.

Determinants of academic cheating behavior: The future for accountancy in Ireland

This paper considers the potential for improving the reputation of the Irish accountancy profession by exploring undergraduate accounting students’ intolerance of academic cheating as a predictor of future attitudes to unethical workplace practices. The study reports that females are significantly more intolerant of cheating than males. Further, with regard to ethical ideology, idealism was found to have a significant positive association with intolerance of cheating while relativism reported no association. It is anticipated that the growing admission of women to professional accountancy membership together with educational intervention to increase idealism may improve ethical attitudes and help restore the profession's reputation.

(Re)-Introducing Themes of Religion and Spirituality to Professional Social Work Training in the Land of ‘Saints and Scholars’.

This chapter begins by alluding to Ireland’s historical reputation as the land of “Saints and Scholars” and then briefly charts its demise from this position. A parallel process in relation to religiously motivated provision of health and social care is outlined. The inclusion of themes of religion and spirituality within the current professional social work codes in the USA and Britain and the framework for social work training in Northern Ireland is noted. In this context the lack of any substantive inclusion of themes of religion and/or spirituality within the Bachelor of Social Work (BSW) degree at Queens University Belfast will be situated. A series of intersecting reasons for this lack of inclusion are proposed in terms of the experience of living through the recent troubled history of Northern Ireland and a variety of biases in academic thought.
A rationale for the re-introduction of inputs on religion and spirituality is articulated in terms of the widespread resurgence of these themes within health and social care and psychotherapy literature and the new emphasis on practicing in culturally sensitive ways in Britain. The first steps to re-introduce these themes under the higher context marker of “culturally competent practice” are described and an analysis of data from the students’ feedback presented along with illustrative quotations. The dissonance between the initial misgivings of staff and the overwhelmingly positive responses of students are highlighted. The chapter concludes with a discussion of lessons learned through the process with an emphasis on how the inclusion of these themes can result in better practice for service users, including those impacted by “the Troubles” in Northern Ireland.

Effect of titania addition on yttria-stabilised tetragonal zirconia ceramics sintered at high temperatures

In order to combine the mechanical properties of yttria-stabilised zirconia (ZrO2-3 mol% Y2O3; code Y-ZrO2) with the bioactivity of titania (TiO2), Y-ZrO2-TiO2, green compacts with 0-40vol.% TiO2 were sintered at 1300, 1400, and 1500degreesC for 4h, respectively. The microstructural features such as grains, pores, and phases were examined using scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy dispersive spectroscopy (EDX). The mechanical properties such as hardness and toughness were also determined using the methods of Vickers indentation and Knoop indentation. All the composites showed the major tetragonal Y-ZrO2 phase regardless of the content of the added TiO2. However, rutile TiO2 phase was obtained at 1300degreesC, whereas zirconium titanate (ZrTi04) phase was found at 1400 and 1500degreesC. The Y-ZrO2-ZrTiO4 Composites sintered at 1500degreesC showed relatively high hardness (860-1000 kg/mm(2)) and toughness (4.0-4.5 MPa m(0.5)), whereas the Y-ZrO2-TiO2 composites sintered at 1300degreesC had slightly lower hardness (720-950kg/mm(2)) and fracture toughness (3.1-3.3 MPa m(0.5)). (C) 2004 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

Operation X: Soviet Russia and the Spanish Civil War

This article offers a critical reassessment of the Soviet role in the Spanish Civil War, based on recent scholarship and declassified official documents. The author interrogates the broad historiographical consensus that reduces Soviet intervention in Spain to a sinister and nefarious force. Stalin's ignominious reputation vis-à-vis the Loyalist side is present in nearly all Western scholarship on the war, whether specialized studies by Nationalist sympathizers or Republicans in exile, or general treatments of European history written in England or America. It would be difficult to locate even a brief overview of the Civil War published outside of Russia that does not in some fashion demonize the Soviet dictator and the Soviet military assistance, code-named ‘Operation X’. The author argues that the basic error in the wide-ranging literature of this topic has always been to approach Stalin's position in Spain as one based on strength rather than weakness. If framed within the context of failure, Stalin's long-standing reputation as the villain of the Civil War may appear in a strikingly different light, and Soviets’ overall contribution to the Loyalist struggle therefore deserving a nuanced revision. The author also explores the multiple strands of the Soviet-Spanish relationship, which included not only military aid but also diplomatic, cultural and humanitarian facets.

Carboxyl functionalised MWCNT/Polymethyl methacrylate bone cement for orthopaedic applications

The incorporation of carboxyl functionalised multi-walled carbon nanotube (MWCNT-COOH) into a leading proprietary grade orthopaedic bone cement (Simplex PTM) at 0.1 wt% has been investigated. Resultant static and fatigue mechanical properties, in addition to thermal and polymerisation properties, have been determined. Significant improvements (p 0.001) in bending strength (42%), bending modulus (55%) and fracture toughness (22%) were demonstrated. Fatigue properties were improved (p 0.001), with mean number of cycles to failure and fatigue performance index being increased by 64% and 52%, respectively. Thermal necrosis index values at 44C and 55C were significantly reduced (p 0.001) (28% and 27%) versus the control. Furthermore, the onset of polymerisation increased by 58% (p < 0.001), as did the duration of the polymerisation reaction (52%). Peak energy during polymerisation increased by 672% (p < 0.001). Peak area of polymerisation increased by 116% (p < 0.001) indicating that the incorporation of MWCNT-COOH reduced the rate of polymerisation significantly. A non-significant reduction (8%) in percentage monomer conversion was also recorded. Raman spectroscopy clearly showed that the addition of MWCNT-COOH increased the ratio between normalised intensities of the G-Band and D-Band (IG/ID), and also increased the theoretical compressive strain (1.72%) exerted on the MWCNT-COOH by the Simplex PTM cement matrix. Therefore, demonstrating a level of chemical interactivity between the MWCNT-COOH and the Simplex PTM bone cement exists and consequently a more effective mechanism for successful transfer of mechanical load. The extent of homogenous dispersion of the MWCNT-COOH throughout the bone cement was determined using Raman mapping. Ke

A-level Mathematics Options – Views of Secondary-level Teachers

The A-level Mathematics qualification is based on a compulsory set of pure maths modules and a selection of applied maths modules with the pure maths representing two thirds of the assessment. The applied maths section includes mechanics, statistics and (sometimes) decision maths. A combination of mechanics and statistics tends to be the most popular choice by far. The current study aims to understand how maths teachers in secondary education make decisions regarding the curriculum options and offers useful insight to those currently designing the new A-level specifications.

Semi-structured interviews were conducted with A-level maths teachers representing 27 grammar schools across Northern Ireland. Teachers were generally in agreement regarding the importance of pure maths and the balance between pure and applied within the A-level maths curriculum. A wide variety of opinions existed concerning the applied options. While many believe that the basic mechanics-statistics (M1-S1) combination is most accessible, it was also noted that the M1-M2 combination fits neatly alongside A-level physics. Lack of resources, timetabling constraints and competition with other subjects in the curriculum hinder uptake of A-level Further Maths.

Teachers are very conscious of the need to obtain high grades to benefit both their pupils and the school’s reputation. The move to a linear assessment system in England while Northern Ireland retains the modular system is likely to cause some schools to review their choice of exam board although there is disagreement as to whether a modular or linear system is more advantageous for pupils. The upcoming change in the specification offers an opportunity to refresh the assessment also and reduce the number of leading questions. However, teachers note that there are serious issues with GCSE maths and these have implications for A-level.

Relationship between Laves phase and the impact brittleness of P92 steel reevaluated

Laves phase has been widely accepted to cause the impact brittleness of 9–12Cr martensitic heat-resistant steels after long time aging at elevated temperatures. However, in the present research, the impact toughness of the already brittle P92 steel aged at 600 °C for 2035 h could be restored to the original level by reheating at 700 °C for 1 h, with Laves phase barely changed. This interesting result strongly indicated that the presence of Laves phase might not be the real reason for the impact brittleness.

Microstructure and Mechanical Propertiesof a Nitride-Strengthened Reduced ActivationFerritic/Martensitic Steel

Nitride-strengthened reduced activation ferritic/martensitic (RAFM) steels are developed taking advantage of the high thermal stability of nitrides. In the current study, the microstructure and mechanical properties of a nitride-strengthened RAFM steel with improved composition were investigated. Fully martensitic microstructure with fine nitrides dispersion was achieved in the steel. In all, 1.4 pct Mn is sufficient to suppress delta ferrite and assure the steel of the full martensitic microstructure. Compared to Eurofer97, the steel showed similar strength at room temperature but higher strength at 873 K (600 °C). The steel exhibited very high impact toughness and a low ductile-to-brittle transition temperature (DBTT) of 243 K (–30 °C), which could be further reduced by purification.

Modeling of titanium alloys by using artificial neural networks

Titanium alloy exhibits an excellent combination of bio-compatibility, corrosion resistance, strength and toughness. The microstructure of an alloy influences the properties. The microstructures depend mainly on alloying elements, method of production, mechanical, and thermal treatments. The relationships between these variables and final properties of the alloy are complex, non-linear in nature, which is the biggest hurdle in developing proper correlations between them by conventional methods. So, we developed artificial neural networks (ANN) models for solving these complex phenomena in titanium alloys.

In the present work, ANN models were used for the analysis and prediction of the correlation between the process parameters, the alloying elements, microstructural features, beta transus temperature and mechanical properties in titanium alloys. Sensitivity analysis of trained neural network models were studied which resulted a better understanding of relationships between inputs and outputs. The model predictions and the analysis are well in agreement with the experimental results. The simulation results show that the average output-prediction error by models are less than 5% of the prediction range in more than 95% of the cases, which is quite acceptable for all metallurgical purposes.

Marine Collagen Reinforcement of Calcium Phosphate Bone Cements: A Biological Assessment

Induction of in vivo responses by implanted biomaterials is of great interest in the medical device field. Calcium phosphate bone cements (CPCs) can potentially promote natural bone remodelling and ingrowth in vivo and, as such are becoming more common place in a range of orthopaedic procedures. However, concerns remain regarding their mechanical and handling properties. Compressive modulus and fracture toughness of CPCs can be improved, without compromising injectability and setting time, through the incorporation of bovine collagen fibres1. Incorporation of marine derived collagen fibres has also yielded similar improvements2. It is hypothesised that, due to its role in bone formation and function, that incorporation of collagen in CPCs will also result in biological benefits.
The biological properties of α-TCP-CPC were largely unchanged by the incorporation of marine derived collagen. However, as a result of significant improvements to the mechanical properties, its incorporation may still result in a suitable alternative to some commercially available bone cements.