Método de pontos interiores no planejamento ótimo do tratamento de câncer por radioterapia

The Medical Physics has been developing very fast due to the progress of the technologies and to the increase of the concerns with cure of diseases. One of the Medical Physics main performances at the present time is the use of ionizing radiations for cancer treatment, especially, services as Radiotherapy. The radiotherapy technique uses ionizing radiation with therapeutic end of cancer controls, avoiding your proliferation and it worsens of the patient. For the treatment a radiation bunch is used, with rectangular form, that it passes through the different types of tissues of the patient's body, and depending on the attenuation and of the depth of the fabrics, a great amount of energy is deposited inside in different points of the body. Like this, to plan this treatment type it should be obtained the dimension of the distribution and dose absorption along the volume. For this, it is necessary in the planning of the treatment of the cancer for radiotherapy to build isodose curves, which are lines that represent points of same amount of dose to be deposited in the area to be treated. To aid the construction of the curves of form isodose to reach the best result in the planning of the treatment, in other words, a great planning, providing the maximum of dose in the tumor and saving the healthy and critical organs, it has been using mathematical tools and computational. A plan of cancer treatment for radiotherapy is considered great when all the parameters that involve the treatment, be them physical or biological, they were investigated and adapted individually for the patient. For that, is considered the type and the location of the tumor, worrying about the elimination of the cancer without damaging the healthy tissue of the treated area, mainly the risk organs, which are in general very sensitive to the radiations. This way, the optimization techniques... (Complete abstract click electronic access below)

Desenvolvimento de nova embalagem para comercialização, transporte e liberação do parasitoide Cotesia flavipes (Cameron, 1891) (Hymenoptera: Braconidae)

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Tempos, movimentos e qualidade da operação de colheita mecanizada de soja em função do formato de talhões

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Caracterização química e resistência à flexão de uma resina acrílica após a incorporação de um polímero com atividade antimicrobiana

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Resistência à flexão de uma resina acrílica após a incorporação de um polímero antimicrobiano

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Detecção de danos em estruturas guiadas usando ondas de alta frequência

Pós-graduação em Engenharia Mecânica - FEIS

Treatment efficiency of effluent prawn culture by wetland with floating aquatic macrophytes arranged in series

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analysis of mesiodistal angulations of preadjusted brackets

Manufacturers offer various prescriptions of preadjusted brackets for use in the "straight-wire" orthodontic technique. However, the need to incorporate bends in the rectangular wires during orthodontic finishing has led to concerns regarding the type of prescription chosen and the credibility of information provided by the manufacturer. The aim of this study was to compare the slot angulations of Roth prescription preadjusted metallic brackets for the maxillary left central incisor and maxillary left canine. For each tooth type, 10 brackets of three commercial brands (GAC, Forestadent and Morelli) were selected. Two individual metal matrices for brackets and tooth positioning were made for each group of teeth. Captured images were obtained by standardized ortho-radial photography with a digital camera. Images were exported and analyzed with the Image J software package. One-way ANOVA and Tukey statistical analyses were performed at the 5% significance level. For brackets of the maxillary left central incisor, differences in mean angulation were observed between the Morelli and GAC groups (p < 0.01) and between the Forestadent and GAC groups (p < 0.01). For brackets of the maxillary left canine, differences in mean angulation were found between the Morelli and GAC groups (p < 0.01) and between the Morelli and Forestadent groups (p < 0.05). In conclusion, despite their same prescription name, the different brands exhibited significantly different angulation measurements.

iCONVERT: an integrated device for the UV-assisted determination of H2S via mid-infrared gas sensors

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Frequency measurements of CD3OH and (CH3OH)-C-13 optically pumped far-infrared laser lines

We report the frequency measurements of 18 optically pumped far-infrared (FIR) laser lines generated from CD3OH and (CH3OH)-C-13. We use the heterodyne technique of mixing FIR laser radiations and microwave radiation on a metal-insulator-metal point-contact tunnel diode to determine the FIR laser frequencies. Two FIR laser systems, consisting of CO2 waveguide pump lasers and Fabry-Perot FIR laser cavities, were used as optical sources. (C) 1997 Optical Society of America.

Determinação do máximo déficit acumulado de oxigênio de nadadores por meio da técnica de retro extrapolação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of polymerization techniques and cleaning solution on flexural resistance of acrylic resin chemically activated

The purpose of this study was to evaluate the impact of different disinfection solutions on flexural resistance of chemically-activated acrylic resin. Test pieces were made of clear acrylic resin using a rectangular mold and employing two techniques: wet polymerization under pressure (n = 20) and dry polymerization under pressure (n = 20). Test pieces were subdivided into four equal groups: distilled water (control), sodium bicarbonate, 1% sodium hypochlorite and effervescent ats. The 30-day cycling technique consisted of immersing the test pieces in 100 ml of solution for 10 min three times a day and placing them in closed containers containing artificial saliva at 37°C. Subsequently, the flexural resistance of samples was tested. Data were analyzed using two-way analysis of variance (ANOVA) with forces serving as the dependent variables and the polymerization technique and cleaning agents as independent variables. Post hoc multiple comparisons were performed using Tukey’s test. There was no statistically significant difference in the flexural strength between the two polymerization techniques. The greatest flexural strength was observed for the effervescent tablets group followed by the control and 1% sodium hypochlorite groups which were statistically similar. Thus, the sodium bicarbonate solution caused the lowest flexural resistance of the test pieces.

Combinando sistemas de informação geográfica e redes neurais GMDH para prever densidades demográficas

The aim of this work is to advance a new approach for estimating demographic density, through combining a Geographic Information System with GMDH Neural Networks. The model that is suggested parts the analyzed space into a rectangular grid formed by multiple cells measuring 0.01 km2 each. The forecasts are elaborated based on the demographic density in each cell and in its neighboring cells at a given time. Despite the limited availability of data during the modeling phase, the utilization of this method for studying a Brazilian medium-sized city presented promising results.

Concordância entre dois testes de capacidade aeróbica máxima baseados na corrida em esteira e pista, com jogadores de futsal

The actual study goal is to test the Ellestad and Weltman protocol concordance in the prediction of VO2max in Futsal athletes. There was no significant difference between the two protocols, there was significant correlation between methods, but the Bland & Altman plotting shown very high amplitude in the Confident Interval at 95%.

Avaliação de métodos de proteção para taludes em estrada não-pavimentada

This work presents the results of the efficiency of three protection methods of roads slopes, against the development of erosion processes.The methods anlyzed were: (1) grass planting "San Carlos" (Axonopus compressus), (2) litter, composed of remains of branches and leaves of eucalyptus E. Grandis, and (3) Compacted soil cover with a local soil with properties more resistant to erosion processes.The experiment consisted of assembly of four rectangular cells with 6 meters, three for protection systems in study and one was kept unprotected to evaluate the efficiency of the methods in study.The determination of the amount of eroded sediment was based on the sum of the solids in suspension and stored sediments in the geotextile bags.The results showed that, compared to the unprotected cell, the litter obtained a reduction of soil loss of 90%, while the grass enveloped and reduced 80% and 65% respectively.