953 resultados para RP
Resumo:
The isolation of adjacent zones encountered during oilwell drilling is carried out by Portland-based cement slurries. The slurries are pumped into the annular positions between the well and the casing. Their rheological behavior is a very important component for the cementing process. Nowadays, several alternative materials are used in oilwell cementing, with goal the modification and the improvement of their properties, mainly the increase of the fluidity. And this can be reached by using plasticizers additives able to account for different oilwell conditions, yielding compatible cement slurries and allowing enough time for the complete cementing operation. If the rheological properties of the slurry are properly characterized, the load loss and flow regime can be correctly predicted. However, this experimental characterization is difficult. Rheological models capable of describing the cement slurry behavior must be capable of predicting the slurry cement deformation within reasonable accuracy. The aim of this study was to characterize rheologically the slurries prepared with a especial class of Portland cement, water and plasticizers based on lignosulfonate, melamine and polycarboxylate at temperatures varying from 27°C to 72°C. The tests were carried out according to the practical recommendations of the API RP 10B guidelines. The results revealed a great efficiency and the dispersive power of the polycarboxylate, for all temperatures tested. This additive promoted high fluidity of the slurries, with no sedimentation. High lignosulfonate and melamine concentrations did not reduce the rheological parameters (plastic viscosity and yield stress) of the slurries. It was verified that these additives were not compatible with the type of cement used. The evaluated rheological models were capable of describing the behavior of the slurries only within concentration and temperature ranges specific for each type of additive
Resumo:
Chitosan is being studied for use as dressing due their biological properties. Aiming to expand the use in biomedical applications, chitosan membranes were modified by plasma using the following gases: nitrogen (N2), methane (CH4), argon (Ar), oxygen (O2) and hydrogen (H2). The samples were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle, surface energy and water absorption test. Biological Tests were also performed, such as: test sterilization and proliferation of fibroblasts (3T3 line). Through SEM we observed morphological changes occurring during the plasma treatment, the formation of micro and nano-sized valleys. MFA was used to analyze different roughness parameters (Ra, Rp, Rz) and surface topography. It was found that the treated samples had an increase in surface roughness and sharp peaks. Methane plasma treatment decreased the hydrophilicity of the membranes and also the rate of water absorption, while the other treatments turned the membranes hydrophilic. The sterilization was effective in all treatment times with the following gases: Ar, N2 and H2. With respect to proliferation, all treatments showed an improvement in cell proliferation increased in a range 150% to 250% compared to untreated membrane. The highlights were the treatments with Ar 60 min, O2 60 min, CH4 15 min. Observing the results of the analyzes performed in this study, it appears that there is no single parameter that influences cell proliferation, but rather a set of ideal conditions that favor cell proliferation
Resumo:
The development of activities in the oil and gas sector has been promoting the search for materials more adequate to oilwell cementing operation. In the state of Rio Grande do Norte, the cement sheath integrity tend to fail during steam injection operation which is necessary to increase oil recovery in reservoir with heavy oil. Geopolymer is a material that can be used as alternative cement. It has been used in manufacturing of fireproof compounds, construction of structures and for controlling of toxic or radioactive waste. Latex is widely used in Portland cement slurries and its characteristic is the increase of compressive strength of cement slurries. Sodium Tetraborate is used in dental cement as a retarder. The addition of this additive aim to improve the geopolymeric slurries properties for oilwell cementing operation. The slurries studied are constituted of metakaolinite, potassium silicate, potassium hydroxide, non-ionic latex and sodium tetraborate. The properties evaluated were: viscosity, compressive strength, thickening time, density, fluid loss control, at ambient temperature (27 ºC) and at cement specification temperature. The tests were carried out in accordance to the practical recommendations of the norm API RP 10B. The slurries with sodium tetraborate did not change either their rheological properties or their mechanical properties or their density in relation the slurry with no additive. The increase of the concentration of sodium tetraborate increased the water loss at both temperatures studied. The best result obtained with the addition of sodium tetraborate was thickening time, which was tripled. The addition of latex in the slurries studied diminished their rheological properties and their density, however, at ambient temperature, it increased their compressive strength and it functioned as an accelerator. The increase of latex concentration increased the presence of water and then diminished the density of the slurries and increased the water loss. From the results obtained, it was concluded that sodium tetraborate and non-ionic latex are promising additives for geopolymer slurries to be used in oilwell cementing operation
Resumo:
Innumerable studies have focused been reported on the sleep spindles (SS), Sharp Vertex Waves (SVW) and REM, NREM Sleep as indicators interpreting EEG patterns in children. However, Frequency and Amplitud Gradient (FAG) is rarely cited sleep parameter in children,that occurs during NREM Sleep. It was first described by Slater and Torres, in 1979, but has not been routinely evaluated in EEG reports. The aim of this study was to assess the absence of SS, SVW and FAG, as an indication of neurological compromise in children. The sample consisted of 1014 EEGs of children referred to the Clinical Neurophysiology Laboratory, Hospital Universitário de Brasília (HUB), from January 1997 to March 2003, with ages ranging from 3 months to 12 years old, obtained in spontaneous sleep or induced by choral hydrate. The study was transversal and analytical, in which, visual analysis of EEG traces was perfumed individually and independently by two electroencephalographers without prior knowledge of the EEG study or neurological findings. After EEG selection, the investigators analyzed the medical reports in order to define and correlate neurological pattern was classified according to the presence or absence of neurological compromise, as Normal Neurological Pattern (NNP), and Altered Neurological Pattern (ANP) respectively. From the visual analysis of the EEG(s), it was possible to characterize 6 parameters: 1- FAG present (64,1%); 2- FAG absent (35,9%); 3 - normal SS (87,9%); 4 - altered SS s (12,1%); 5 - normal SVW s (95,7%); 6 - altered SVW s (4,3%). The prevalence of well-formed FAG is found in the 3 months to 5 years age group in the children with NNF. FAG was totally absent from the age of 10 years. When comparing the three sleep graphielements, it was observed that SVW and SS were predominant in children with NNF. However, FAG absent was more prevalent in the ANF than in altered SS an SVW. The statistical analysis showed that there is a strong association of FAG absent, with isolated alteration, in ANF patients, in that the prevalence ratio was 6,60. The association becomes stronger when FAG absent + altered SS(s) is considered (RP= 6,68). Chi-square test, corrected by Yates technique, showed a highly significant relation for FAG ρ= 0,00000001, for error X of 5%, or else the 95% confidence interval (ρ<0,05). Thus, the FAG absent were more expressive in ANF patient than altered SS(s) and SVW(s). The association becomes stronger in order to establish a prognostic relation, when the FAG is combined with the SS. The results os this study allow us to affirm that the FAG, when absent at ages ranging from 3 months to 5 years , is an indication of neurological compromise. FAG is an age-dependent EEG parameter and incorporated systematically, in the interpretation criteria of the EEG of children s sleep, not only in the maturational point of view, but also neurological disturbances with encephalic compromise
Resumo:
O propósito dessa investigação foi o de estudar as situações objetivas e de auto-percepção em saúde bucal de idosos residentes em Instituições de Longa Permanência de Idosos (ILPIS) distribuídos em 11 municípios pertencentes as 5 regiões geográficas do Brasil. Metodologia: Trata-se de estudo seccional através de um censo com idosos institucionalizados no Brasil. Foram avaliados 1192 indivíduos, residentes em 36 Instituições de Longa Permanência de Idosos (ILPIS), distribuídas em 11 municípios. Deste universo, 587 (49,2%) responderam ao GOHAI. Foi aplicado questionário com questões subjetivas e sobre o comportamento em saúde bucal, além de levantamento epidemiológico seguindo critérios da Organização Mundial da Saúde (OMS). Foram realizados os testes de Mann-Whitney, Kruskal-Wallis, Exato de Fisher, Qui-quadrado e Regressão logística múltipla. Resultados: A idade média foi de 74,98 (+ 9,5). Destes, 51,4% (302) eram do sexo masculino e 152 (25,9) apresentavam alguma dependência. A média do CPOD foi de 28,8 (+ 5,5) e 54,5% (320) dos idosos eram edêntulos. Constatouse que 54,2% (318) e 74,1% (435) não usam nenhum tipo de prótese superior e inferior, respectivamente. O CPI e PIP mostraram que 64,4% (378) apresentaram todos os sextantes excluídos. O GOHAI mostrou que 75% (440) dos indivíduos apresentava auto-percepção positiva em saúde bucal. As variáveis última visita ao dentista (RP ajust=4,058; IC=1,526-10,789), presença de problemas gengivais (RP ajust=5,703; IC=1,754-18,544) e opinião sobre os dentes, as gengivas ou prótese (RP ajust=19,514; IC=5,075-75,041) permaneceram significativas no modelo após regressão logística múltipla. Conclusões: Observou-se predomínio da auto-percepção positiva em saúde bucal em detrimento das precárias condições bucais. Assim, para a população institucionalizada, o presente estudo recomenda a aplicação de levantamentos epidemiológicos e de auto-percepção para assegurar adequado planejamento nas ações de saúde bucal
Resumo:
Objective: Identify the factors associated to the painful symptomatology and the quality of life and in dentists in the city of Teresina-PI. Brazil. Methods It was accomplished a cross-sectional study with 175 dentists registered with the Regional Council of Dentistry-PI from March to May, 2007. For characterization of the dentists we used a multidimensional questionnaire containing sociodemographic (age, sex) and professional information (time of service, journey to work). The evaluation of the presence of pain was performed by the Protocol of Painful Symptoms of McGILL. The WHOQOL-Bref was used to assess quality of life through physical, psychological, social and environmental domains. Results / Conclusions The painful symptomatology was reported in 69,7% of individuals, being observed in 77.3% of women and 60.3% of men. Body regions where pain was prevalent was the regions of neck (69,2%) lower back (69,7%). The dentists had high levels of self-perception of quality of life satisfaction and health. 96,0% of the individuals reported quality of life as very good, and only 16.6% reported dissatisfied with health. The Physical and Environmental domains showed values higher than the psychological and social domains. The painful symptomatology of studied dentists is associated with female sex (RP=1.28; IC95% 1.04-1.58; p<0.01). A multivariate analysis by logistic regression was performed and only the painful symptoms (OR = 2.51, IC95% 1,21-5,21) remained associated with the quality of life of these professionals when adjusted for other variables studied
Resumo:
Helicoverpa zea is responsible for great losses to the corn, Zen mays L., crops final productivity, and the best way to control it is by improving genetic resistance. In collaboration with corn improvement and increasing resistance to insects through molecular marker assisted selection, this work had as an objective the selection of resistant (RP) and susceptible progenies (SP) to H. zea based on the RAPD technique. Molecular markers were Found, among the resistant progenies and it is suggested that linkage of these within the Zapalote Chico corn race, be used to extract resistance genes from this race as a donor. The progenies were selected from a population of half-sibs exhibiting a broader genetic base (FCAVJ-VF14). After DNA extraction, two sample bulks were formed; one made up of the six most resistant plants, the other of the six least resistant plants. Eighty-six primers were tested for PCR reactions with the resistant and susceptible bulks and analyzed on agarose electrophoresis for the detection of RAPD band polymorphism. The results of the banding patterns and similarity values indicated a nucleotide sequence amplified by the primer OPC-2 as a possible molecular marker for the identification of resistant progenies and a homology region between them and the Zapalote Chico corn race.
Resumo:
The herbal medicine Sanativo® is produced by the Pernambucano Laboratory since 1888 with indications of healing and hemostasis. It is composed of a fluid extract about Piptadenia colubrina, Schinus terebinthifolius, Cereus peruvianus and Physalis angulata. Among the plants in their composition, S. terebinthifolius and P. colubrina have in common phenolic compounds which are assigned most of its pharmacological effects. The tannins, gallic acid and catechin were selected as markers for quality control. The aim of this study was the development and validation of analytical method by HPLC/UV/DAD for the separation and simultaneous quantification of gallic acid (GAC) and catechin (CTQ) in Sanativo®. The chromatographic system was to stationary phase, C-18 RP column, 4,6 x 150 mm (5 mm) under a temperature of 35 ° C, detection at 270 and 210 nm. The mobile phase consisted of 0.05% trifluoroacetic acid and methanol in the proportions 88:12 (v/v), a flow rate of 1 ml/min. The analytical method presented a retention factor of 0.30 and 1.36, tail factor of 1.8 and 1.63 for gallic acid and catechin, respectively, resolution of 18.2, and theoretical plates above 2000. The method validation parameters met the requirements of Resolution n º 899 of May 29, 2003, ANVISA. The correlation coefficient of linear regression analysis for GAC and CTQ from the standard solution was 0.9958 and 0.9973 and when performed from the Sanativo® 0.9973 and 0.9936, the matrix does not interfere in the range 70 to 110 %. The limits of detection and quantification for GAC and CQT were 3.25 and 0.863, and 9.57 and 2.55 mg/mL, respectively. The markers, GAC and CQT, showed repetibility (coefficient of variation of 0.94 % and 2.36 %) and satisfactory recovery (100.02 ± 1.11 % and 101.32 ± 1.36 %). The method has been characterized selective and robust quantification of GAC and CTQ in the Sanativo® and was considered validated
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Funções de pedotransferência são regressões utilizadas para estimar atributos edáficos dependentes a partir de atributos independentes e de fácil determinação. Nesse sentido, são propostas na literatura diversas funções de pedotransferência que visam predizer a resistência do solo à penetração. Objetivou-se, portanto, com este trabalho, desenvolver e comparar a eficiência de cinco funções de pedotransferência para a curva de resistência do solo à penetração, presentes na literatura, por meio do ajuste de dados obtidos tanto com o penetrômetro de impacto (campo) quanto com o penetrômetro eletrônico (laboratório), em um Latossolo manejado sob diferentes modos (convencional e plantio direto). Foram coletadas amostras indeformadas de solo na entrelinha das culturas, nas camadas de 0-0,10, 0,10-0,20 e 0,20-0,30 m, logo após a semeadura, no florescimento e na colheita, para determinação dos atributos físico-hídricos do solo e também da resistência do solo à penetração, com o uso do penetrômetro eletrônico. A resistência do solo à penetração, obtida com o penetrômetro de impacto, foi determinada conforme a variação do conteúdo de água no solo ao longo do ciclo das culturas. As curvas ajustadas de resistência do solo à penetração tiveram a precisão e a acurácia testadas por meio de parâmetros estatísticos e foram comparadas pelo teste F. Houve sobreposição dos valores estimados pelo ajuste das curvas, evidenciando que a maneira de obtenção da resistência do solo à penetração (campo ou laboratório) não influenciou a relação entre a resistência à penetração e os atributos do solo. As equações RP = aUg b; RP = a(1-Ug)b; RP = ae bUg e RP = a + be não diferiram e foram as mais precisas e acuradas na predição da resistência do solo à penetração.
Resumo:
A estimativa da curva de resistência do solo à penetração (CRP) a partir de variáveis de fácil obtenção, como o conteúdo de água, representa uma medida útil não só para a quantificação do estado de compactação, mas também para facilitar a interpretação da resistência do solo à penetração obtida em diferentes condições de campo. O objetivo deste trabalho foi estimar a CRP em solos de diferentes granulometrias e densidades, a partir de dados obtidos com o penetrômetro de impacto. O experimento foi realizado no laboratório de Pedologia da Faculdade de Ciências Agrárias e Veterinárias (UNESP), Jaboticabal, SP. Foram utilizadas quatro classes de solos: Neossolo Quartzarênico, Argissolo Vermelho-Amarelo, Latossolo Vermelho distrófico e Latossolo Vermelho acriférrico, os quais foram coletados na camada de 0-0,20 m. Colunas de PVC, com dimensões de 0,25 m de diâmetro e 0,6 m de altura, foram preenchidas de forma a obter duas condições de compactação: menor densidade e maior densidade do solo. O conteúdo de água nos solos, inicialmente elevado até o ponto de saturação, foi monitorado diariamente por meio de um medidor eletrônico tipo TDR (Profile Probe PR2 acoplado ao Moisture Meter HH2). A resistência do solo à penetração foi mensurada por meio de um penetrômetro de impacto adaptado para vaso. Os pares de dados entre a resistência do solo à penetração e o conteúdo de água foram ajustados, e as CRP foram submetidas ao teste de significância. A relação entre a resistência do solo à penetração e o conteúdo de água foi descrita pelo modelo exponencial decrescente: em que RP representa a resistência do solo à penetração (MPa); Ug é o conteúdo de água (kg kg-1); e A, B e C são os coeficientes da equação. Foram obtidos coeficientes de determinação que variaram de 0,79 a 0,96.
Resumo:
A caracterização da variabilidade espacial dos atributos do solo é indispensável para subsidiar práticas agrícolas de maneira sustentável. A utilização da geoestatística para caracterizar a variabilidade espacial desses atributos, como a resistência mecânica do solo à penetração (RP) e a umidade gravimétrica do solo (UG), é, hoje, prática usual na agricultura de precisão. O resultado da análise geoestatística é dependente da densidade amostral e de outros fatores, como o método de georreferencimento utilizado. Desta forma, o presente trabalho teve como objetivo comparar dois métodos de georreferenciamento para a caracterização da variabilidade espacial da RP e da UG, bem como a correlação espacial dessas variáveis. Foi implantada uma malha amostral de 60 pontos, espaçados em 20 m. Para as medições da RP, utilizou-se de penetrógrafo eletrônico e, para a determinação da UG, utilizou-se de trado holandês (profundidade de 0,0-0,1 m). As amostras foram georreferenciadas, utilizando-se do método de Posicionamento por Ponto Simples (PPS), com de (retirar) receptor GPS de navegação, e Posicionamento Relativo Semicinemático, com receptor GPS geodésico L1. Os resultados indicaram que o georreferenciamento realizado pelo PPS não interferiu na caracterização da variabilidade espacial da RP e da UG, assim como na estrutura espacial da relação dos atributos.
Resumo:
Amostras de soro de 714 equídeos das microrregiões de Itaguaí e Serrana, Rio de Janeiro, Brasil, foram submetidas ao teste de imunofluorescência indireta (título 1:80) para Theileria equi. A prevalência entre as microrregiões e os fatores associados à soropositividade foram avaliados e a razão de prevalência (RP) calculada. A prevalência geral para T. equi foi de 81,09% (n = 579), com maior prevalência (p < 0,05) para microrregião de Itaguaí (85,43%), quando comparado a Serrana (76,92%). A região, altitude, nível da propriedade e origem dos equídeos foram associados (p < 0,05) com a soropositividade para T. equi. Equídeos criados na microrregião de Itaguaí (RP = 1,11; p = 0,003) e em altitudes abaixo de 500 m (RP = 1.10; p = 0,014) apresentaram maior chance de se tornarem soropositivos para T. equi. Além disso, quando são criados em propriedades de nível ruim (RP = 1,13; p = 0,018) e nascidos na propriedade (RP = 1,10; p = 0,008) apresentaram mais chance de terem contato com T. equi. As principais espécies de carrapatos encontradas parasitando os equídeos foram Amblyomma cajennense e Dermacentor (Anocentor) nitens. As microrregiões estudadas são endêmicas para theileriose equina e de estabilidade enzoótica para T. equi. Apenas os fatores relacionados à área de coleta das amostras de soro influenciaram a soropositividade dos equídeos para T. equi naquela região.
Resumo:
The cultivation of the soil causes changes in physical attributes, depending on the intensity of preparation and management. The objective of this work was to evaluate the degree of modification of some physical properties of soil mid the S index, comparing areas of Pasture of grass Tanzania (Panicum maximum) and native forest with an area under maize (Zea mays L.) irrigated bay, a central pivot. The study was conducted in three areas within the Agency of Technology Agribusiness Paulista (APTA) Regional High Mogiana, located in Colina, SP. The experimental design was split plot in a factorial 3 x 3, with 4 replications, where the plots were installed in areas of Cultivation of corn, pasture and forest in the depths 0-0.1 m, 0.1-0.2 m 0.2-0.3 m. The physical attributes of soil were: resistance to penetration (RP), bulk density (Ds), microporosity (Micro), macroporosity (Macro), total volume of pores (VTP) and water retention in soil. The native forest had the best physical condition of soil in all parameters examined. The use of land and pasture with corn altered the physical structure of it, evidenced by the increase in penetration resistance and soil density and, reduction in macroporosity. The level of degradation of the managed soil was considered low, index S (<0035). The replacement of pasture by the corn crop in the soil tillage system provided a conventional mild improvement in soil physical characteristics.
Resumo:
A qualidade física do solo é essencial ao crescimento das plantas e à sustentabilidade dos sistemas agrícolas. O objetivo deste estudo foi avaliar a eficiência do intervalo hídrico ótimo (IHO) no monitoramento da compactação e qualidade física do solo para soja em cultivo de sequeiro e irrigado. O experimento foi realizado em Latossolo Vermelho eutroférrico (21 ° 14 ' 53S; 48 ° 17 ' 20W; 540 m de altitude). O delineamento experimental foi inteiramente casualizado em esquema fatorial 6 x 2, com quatro repetições. Os tratamentos de compactação foram: T1 = sem compactação; T2 = 1 passada de trator de 4 t; T3 = 1; T4 = 2; T5 = 4; e T6 = 6 passadas de um trator de 11 t, no mesmo local. Foi semeada a soja (Glycine max (L.) Merrill), cultivar IAC Foscarim 31. Foram coletadas amostras indeformadas de solo nas camadas de 3-6, 8-11, 15-18 e 22-25 cm, para determinação dos atributos físicos. Na colheita, foi avaliada a produtividade de soja em microparcela de 3,37 m². No cultivo de soja sequeiro e irrigado, a produtividade diminui a partir da resistência à penetração (RP) de 1,30 e 1,64 MPa e da densidade do solo (Ds) de 1,26 e 1,29 kg dm-3, com perdas de 19,15 e 11,71 % no maior nível de compactação (RP = 2,84 MPa; Ds = 1,45 kg dm-3), respectivamente. O IHO foi reduzido pela RP até atingir a Dsc(IHO = 0) de 1,33 e 1,38 kg dm-3, no cultivo de soja sequeiro e irrigado. O IHO é adequado no monitoramento da compactação e da qualidade física do solo para soja, quando sua aplicação é realizada com base no valor de resistência à penetração limitante e no valor de densidade crítica do solo (IHO = 0). A soja em cultivo irrigado tolera maior compactação.