999 resultados para Pt superficial steps
Resumo:
We report the synthesis of amino(2-hydroxy-2-(4-methoxyphenyl)ethylamino)methaniminium (14) as a direct precursor of a tubastrine derivative (3-dehydroxy-4-methoxytubastrine). The synthetic steps involved functional group interconversions starting from 1-(4-methoxyphenyl)ethanone to obtain the guanidine-protected derivative 13. Tentative dehydration of 13 with SiOH-adsorbed CuSO4 resulted in guanidine deprotection only. This was an unexpected result, since there are no reports of CuSO4.SiOH as Boc-deprotecting of guanidines. The product 14 was obtained in five steps and 5.4 % overall yield, and constitutes a direct precursor of 3-dehydroxy-4-methoxytubastrine.
Resumo:
The main objective of this work is to develop an efficient procedure to determine glyphosate in soybean grains. The cleanup of the aqueous extracts was done in two steps, beginning with liquid-liquid partitioning and then solid-phase extraction with anion exchange resin. After derivatization with a mixture of trifluoroacetic anhydride (TFAA) and trifluoroethanol (TFE), quantification was done by gas chromatography coupled to mass spectrometry. The mean recovery and RSD of the spiked samples were, respectively, 80.5% and 3.1% at level 0.200 mg kg-1, 93.3% and 18.7% at level 0.500 mg kg-1 and 92% and 3.5% at level 1.000 mg kg-1. The method was linear in the working range (correlation coefficient = 0.9965).
Resumo:
This work describes a hydrometallurgical route for processing spent commercial catalysts (CoMo and NiMo/Al2O3). Samples were preoxidized (500 ºC, 5 h) in order to eliminate coke and other volatile species present. The calcined solid was dissolved in concentrated H2SO4 and water (1:1 vol/vol) at 90 ºC; the insoluble matter was separated from the solution. Molybdenum was recovered by solvent extraction using tertiary amines at pH around 1.8. Cobalt (or nickel) was separated by addition of aqueous ammonium oxalate at the above pH. Phosphorus was removed by passing the liquid through a strong anion exchange column. Aluminum was recovered by neutralizing the solution with NaOH. The route presented in this work generates less final aqueous wastes because it is not necessary to use alkaline medium during the metal recovery steps.
Resumo:
Aminoalcohols have found important applications in synthetic and medicinal chemistry, being used as chiral building blocks for the synthesis of many biologically active compounds. This class of compounds has been also used as chiral auxiliaries and ligands in asymmetric synthesis. Due to the importance of aminoalcohols in the treatment of several diseases, such as tuberculosis, the aim of this article is the synthesis and preliminary evaluation against tuberculosis of six aminoalcohols in 5 or 6 steps using D-mannitol as starting material, which is a useful carbohydrate employed in many syntheses.
Resumo:
The bakkenolide group of sesquiterpenes has been a focal point of synthetic efforts amongst several research laboratories all linked to our common origins at the Chemistry Institute at the State University in São Paulo. In this review we would like to present a historical perspective of this research, with unpublished background information, and a definitive retrosynthetic analysis of these molecules. This chemistry spans the time period from 1972 to 2006, and traces the initial steps with Prof. Dr. Helena Ferraz to the present day.
Resumo:
The relationship between the magnetic dipole-dipole potential energy function and its quantum analogue is presented in this work. It is assumed the reader is familiar with the classical expression of the dipolar interaction and has basic knowledge of the quantum mechanics of angular momentum. Except for these two points only elementary steps are involved.
Resumo:
This work describes the optimization of pretreatment steps for the destruction of organic matter in samples of waters and biological fluids, by using an UV irradiation system with a high power UV radiation source (400 W). The efficiency of the system constructed for the photo-decomposition of samples of model waters, natural waters and biological fluids was investigated by performing recovery experiments of the metallic species Zn(II), Cd(II), Pb(II), Cu(II), Al(III) and Fe(III). The use of UV irradiation allowed the liberation of metals bound to the organic matrix and the determination of the total content of elements in the samples.
Resumo:
Water pollution is a serious environmental problem. In Rondinha, Rio Grande do Sul, on a small area planted with tobacco, it has been using organophosphates pesticides. The purpose of this study was to evaluate the organophosphates pesticides contamination of the superficial water in this municipality. The samples collected in fifteen places were evaluated by the method of organophosphates acethylcolinestherase inhibition. In five samples the organophosphates levels were above the limit established by CONAMA, indicating the necessity of arrangements that allow reducing the risk of the population and the environment contamination.
Resumo:
Recently lipases have been increasing in prominence due to its wide industrial application. The lipase production can be influenced by different variables such as the producing microorganism, carbon sources, aeration and agitation conditions, inductor type and the geometry of the reactor. Biosurfactants are composites of surface active produced by microbial cells which reduce superficial and interfacial tensions. The objective of this study was to verify the influence of different process variables in the lipase production during a fermentative process. The results showed that the concomitant production of lipases and biosurfactant was possible in different cultivation conditions.
Resumo:
Laser-induced fluorescence spectroscopy was used to determine the humification degree of the organic matter of a whole soil, that is, soil without any physical or chemical treatment. Particle size was determined in physically separated fractions. The humification of organic matter, the depth of the soil and the planting system can be correlated. On the surface of the soil, no tillage provided the smallest humification in comparison with the conventional tillage and reduced tillage. The fractions of the superficial layer of the soil (0-20 cm) indicated larger humification in the fraction from 20 to 53 µm and the smallest in the fraction of <2 µm.
Resumo:
In a moment that amazingly advances are being reached on the development of technologies to obtain high value chemical compounds as polymers, fine chemicals, pharmaceutical industry intermediates and chemical entities, we cannot refuse that a meaningful progress is due to the maturing in knowledge of biological transformations. Biocatalysis and biotransformations are being widespread applied to generate processes and products with incredible success. In this review article we present the main contributions of biotechnology and biological catalytic processes to Chemistry, the most important evolution steps on enzymatic transformations, how it has being applied and which are the perspectives to academic and industrial environments. We also would like to stimulate the community to step out research in biotechnology applicable to chemical and pharmaceutical industries, trying to achieve what we believe to be the ideal layout: integrating chemical transformations, enzymatic conversions and fermentation processes.
Resumo:
Novel modified electrodes bearing dispersed Pd and Pt particles have been prepared from poly (allyl ether of the p-benzenesulfonic acid) films with incorporated nickel particles making use of galvanic displacement reactions. The SEM analysis of the new modified electrodes revealed efficient deposition of Pd but weak up-take of Pt. Electrocatalytic hydrogenation of several classes of organic substrates were carried out using the MEs Ni, Ni/Pd and Ni/Pt. The Ni/Pd ME showed to be the best of them for the hydrogenation of double, triple and carbonyl bonds. The complete hydrogenation of the aromatic rings for the well-adsorbed substrates acetophenone and benzophenone is noteworthy.
Resumo:
The inputs of organic matter derived from natural and anthropogenic sources to Sepetiba Bay were investigated by using aliphatic hydrocarbons and sterols in superficial sediments. Concentrations ranged from 0.26 to 2.65 μg g-1, <0.01 to 17.41 μg g-1 and 0.77 and 9.24 μg g-1 for n-alkanes, UCM (unresolved complex mixture) and total sterols, respectively. The selected markers and ratios among individual compounds showed the major contribution of terrestrial sources to the total pool of sedimentary organic matter in the bay, but the accumulation of autochthonous organic matter increased with distance from the shoreline. The input of petroleum hydrocarbons and sewage (coprostanol in the range 0.01 to 0.43 μg g-1) were also detected, especially in the more urbanized regions of the bay, but at lower levels of contamination when compared to estuaries in other Brazilian coastal regions.
Resumo:
Magnetic soils forming on tuffite of the region of Alto Paranaíba, Minas Gerais, Brazil, usually contain iron-rich spinels exceptionally rich in magnesium and titanium. In this work, samples of the magnetically separated portion from the sand fraction of a Brunizém (Chernossolo) and from its mother-rock material were analyzed with synchrotron X-ray diffraction and 57Fe-Mössbauer spectroscopy. Magnesioferite (MgFe2O4) and maghemite (its pure non-stoichiometric spinel structure, Fe8/3 ⊕ 1/3 O4, where ⊕ = cation vacancy, corresponds to γFe2O3) were the magnetic iron oxides so identified. Basing on these data, a consistent chemical-mineralogical model is proposed for the main transformation steps involving these iron oxides in the pedosystem, starting on magnesioferrite to finally render hematite (αFe2O3), passing through maghemite as an intermediate specie.
Resumo:
Humans are exposed to a variety of chemicals from the consumption of food, including undesirable compounds such as pesticides and mycotoxins. Chemical human risk assessment is a process intended to estimate the risk to a given population from the exposure to a chemical (or to a chemical group having the same mechanism of action). The process consists of four steps, namely hazard identification, hazard characterization, exposure assessment and risk characterization. Chemical dietary risk assessment is an essential procedure to establish safe food standards. In this review the tools and data sources currently used in the risk assessment process will be discussed.