Development of a new cellular model for the visualization and study of GFAP oligomerization in living cells

Tese de mestrado, Neurociências, Faculdade de Medicina, Universidade de Lisboa, 2016

Deciphering the mechanisms underlying the loss of BDNF neuroprotection in an Alzheimer’s disease model

Tese de mestrado, Neurociências, Faculdade de Medicina, Universidade de Lisboa, 2016

Product innovation and the costs of energy-using product policies

Energy-using Products (EuPs) contribute significantly to the United Kingdom’s CO2 emissions, both in the domestic and non-domestic sectors. Policies that encourage the use of more energy efficient products (such as minimum performance standards, energy labelling, enhanced capital allowances, etc.) can therefore generate significant reductions in overall energy consumption and hence, CO2 emissions. While these policies can impose costs on the producers and consumers of these products in the short run, the process of product innovation may reduce the magnitude of these costs over time. If this is the case, then it is important that the impacts of innovation are taken into account in policy impact assessments. Previous studies have found considerable evidence of experience curve effects for EuP categories (e.g. refrigerators, televisions, etc.), with learning rates of around 20% for both average unit costs and average prices; similar to those found for energy supply technologies. Moreover, the decline in production costs has been accompanied by a significant improvement in the energy efficiency of EuPs. Building on these findings and the results of an empirical analysis of UK sales data for a range of product categories, this paper sets out an analytic framework for assessing the impact of EuP policy interventions on consumers and producers which takes explicit account of the product innovation process. The impact of the product innovation process can be seen in the continuous evolution of the energy class profiles of EuP categories over time; with higher energy classes (e.g. A, A+, etc.) entering the market and increasing their market share, while lower classes (e.g. E, F, etc.) lose share and then leave the market. Furthermore, the average prices of individual energy classes have declined over their respective lives, while new classes have typically entered the market at successively lower “launch prices”. Based on two underlying assumptions regarding the shapes of the “lifecycle profiles” for the relative sales and the relative average mark-ups of individual energy classes, a simple simulation model is developed that can replicate the observed market dynamics in terms of the evolution of market shares and average prices. The model is used to assess the effect of two alternative EuP policy interventions – a minimum energy performance standard and an energy-labelling scheme – on the average unit cost trajectory and the average price trajectory of a typical EuP category, and hence the financial impacts on producers and consumers.

Cross-Industry Product Diversification and Contagion in Risk and Return: The Case of Bank-Insurance and Insurance-Bank Takeovers

We investigate the impact of domestic/international bancassurance deals on the risk-return profiles of announcing and non-announcing banks and insurers within a GARCH model. Bank-insurance deals produce intra- and inter-industry contagion in both risk and return, with larger deals producing greater contagion. Bidder banks and peers experience positive abnormal returns, with the effects on insurer peers being stronger than those on bank peers. Insurance-bank deals produce insignificant excess returns for bidder and peer insurers and positive valuations for peer banks. Following the deal, the bank bidders’ idiosyncratic (systematic) risk falls (increases), while insurance bidders exhibit a lower systematic risk and maintain their idiosyncratic risk.

A model for information retrieval driven by conceptual spaces

A retrieval model describes the transformation of a query into a set of documents. The question is: what drives this transformation? For semantic information retrieval type of models this transformation is driven by the content and structure of the semantic models. In this case, Knowledge Organization Systems (KOSs) are the semantic models that encode the meaning employed for monolingual and cross-language retrieval. The focus of this research is the relationship between these meanings’ representations and their role and potential in augmenting existing retrieval models effectiveness. The proposed approach is unique in explicitly interpreting a semantic reference as a pointer to a concept in the semantic model that activates all its linked neighboring concepts. It is in fact the formalization of the information retrieval model and the integration of knowledge resources from the Linguistic Linked Open Data cloud that is distinctive from other approaches. The preprocessing of the semantic model using Formal Concept Analysis enables the extraction of conceptual spaces (formal contexts)that are based on sub-graphs from the original structure of the semantic model. The types of conceptual spaces built in this case are limited by the KOSs structural relations relevant to retrieval: exact match, broader, narrower, and related. They capture the definitional and relational aspects of the concepts in the semantic model. Also, each formal context is assigned an operational role in the flow of processes of the retrieval system enabling a clear path towards the implementations of monolingual and cross-lingual systems. By following this model’s theoretical description in constructing a retrieval system, evaluation results have shown statistically significant results in both monolingual and bilingual settings when no methods for query expansion were used. The test suite was run on the Cross-Language Evaluation Forum Domain Specific 2004-2006 collection with additional extensions to match the specifics of this model.

A Fuzzy-Wavelet Neural Network Model for the Detection of Meat Spoilage using an Electronic Nose

Food product safety is one of the most promising areas for the application of electronic noses. The performance of a portable electronic nose has been evaluated in monitoring the spoilage of beef fillet stored aerobically at different storage temperatures (0, 4, 8, 12, 16 and 20°C). This paper proposes a fuzzy-wavelet neural network model which incorporates a clustering pre-processing stage for the definition of fuzzy rules. The dual purpose of the proposed modeling approach is not only to classify beef samples in the respective quality class (i.e. fresh, semi-fresh and spoiled), but also to predict their associated microbiological population directly from volatile compounds fingerprints. Comparison results indicated that the proposed modeling scheme could be considered as a valuable detection methodology in food microbiology

Production systems and supplier selection: a multi-phase process model

Purpose: This paper presents a combined multi-phase supplier selection model. The process repeatedly revisits the criteria and sourcing decision as the development process continues. This enables a structured adoption of product and production system innovation from strategic suppliers, where previously the literature purely focuses on product innovation or cost reduction. Design/methodology/approach: The authors adopted an embedded researcher style, inductive, qualitative case study of an industrial supply cluster comprising a focal automotive company and its interaction with three different strategic stamping suppliers. Findings: Our contribution is the multi-phased production and product innovation process. This is an advance from traditional supplier selection and also an extension of ideas of supplier-located product development as it includes production system development, and complements the literature on working with strategic suppliers. Specifically, we explicitly articulate the previously unreported issue of whether a supplier chosen for its innovation capabilities at the start of the new product development process will also be the most appropriate supplier during the production system development phase, when an ability to work collaboratively may be the most important attribute, or in the large-scale production phase when an ability to manufacture at low unit cost may be most important. Originality/value: The paper identifies a multi-phase approach to tendering within a fixed body of strategic suppliers which seeks to identify the optimum technological and process decisions as well as the traditional supplier sourcing choice. These areas have not been combined before and generate a valuable approach for firms to adopt as well as for researchers to extend our understanding of a highly complex process.

Simulation model for driving dynamics, energy use and power supply

Dissertação para obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Energia

Bertrand model under incomplete information

We consider a Bertrand duopoly model with unknown costs. The firms' aim is to choose the price of its product according to the well-known concept of Bayesian Nash equilibrium. The chooses are made simultaneously by both firms. In this paper, we suppose that each firm has two different technologies, and uses one of them according to a certain probability distribution. The use of either one or the other technology affects the unitary production cost. We show that this game has exactly one Bayesian Nash equilibrium. We analyse the advantages, for firms and for consumers, of using the technology with highest production cost versus the one with cheapest production cost. We prove that the expected profit of each firm increases with the variance of its production costs. We also show that the expected price of each good increases with both expected production costs, being the effect of the expected production costs of the rival dominated by the effect of the own expected production costs.

Building a person home behavior model based on data from smart house sensors 2015

Dissertação para a obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Energia

Melhoria de linha de produção na indústria automóvel

No âmbito da unidade curricular Dissertação do 2ºano do Mestrado em Engenharia mecânica – Ramo de Gestão Industrial do Instituto Superior de Engenharia do Porto, o presente trabalho de dissertação foi enquadrado num projeto industrial para a racionalização de uma linha de produção. O projeto foi desenvolvido numa empresa de produção de componentes por alumínio injetado e seguidamente processos de maquinação, para mercados a nível mundial destinados à indústria automóvel. A realização deste projeto teve como objetivo a melhoria de uma linha de produção na empresa TESCO Componentes para automóveis, Lda. recorrendo a métodos e ferramentas utilizadas pela Gestão Industrial tais como, Lean, 5’S, PDCA assim como ferramentas específicas de balanceamento e otimização de linhas. Os métodos e ferramentas utilizados permitiram a seleção da linha, a definição e caraterização do modelo em produção e posto de trabalho, isto com o objetivo reduzir os custos, aumentar a produtividade e conduzir a melhorias ao nível de qualidade. Através de análises realizadas aos dados de produção foi possível a avaliação do indicador de eficiência operacional do equipamento, através dos OEE’s, o que possibilitou uma análise mais compreensiva da capacidade e cadência da linha de produção. Com a aplicação dos métodos ligados à filosofia de produção em Lean, foi possível atingir-se os objetivos inicialmente definidos, e em alguns casos foi possível ultrapassá-los. Em função da abordagem integrada que foi seguida, conseguiu-se uma redução de um posto de trabalho, traduzindo-se na redução do custo de fabrico não deixando de referir que também houve melhorias a nível de qualidade do produto. Reduzindo a possibilidade de falhas com as especificações estabelecidas pelos clientes. Como efeito positivo deste projeto pode-se apontar o fato de que a empresa Tesco Componentes para Automóveis, Lda. aumentou a sua competitividade com a oportunidade de redução do preço final do produto e também com o aumento da qualidade do mesmo.

Descending pain modulation in a Kaolin-induced hydrocephalus rat model

Pain transmission at the spinal cord is modulated by descending actions that arise from supraspinal areas which collectively form the endogenous pain control system. Two key areas involved of the endogenous pain control system have a circunventricular location, namely the periaqueductal grey (PAG) and the locus coeruleus (LC). The PAG plays a crucial role in descending pain modulation as it conveys the input from higher brain centers to the spinal cord. As to the LC, it is involved in descending pain inhibition by direct noradrenergic projections to the spinal cord. In the context of neurological defects, several diseases may affect the structure and function of the brain. Hydrocephalus is a congenital or acquired disease characterized by an enlargement of the ventricles which leads to a distortion of the adjacent tissues, including the PAG and LC. Usually, patients suffering from hydrocephalus present dysfunctions in learning and memory and also motor deficits. It remains to be evaluated if lesions of the periventricular brain areas involved in pain control during hydrocephalus may affect descending pain control and, herein, affect pain responses. The studies included in the present thesis used an experimental model of hydrocephalus (the rat injected in the cisterna magna with kaolin) to study descending modulation of pain, focusing on the two circumventricular regions referred above (the PAG and the LC). In order to evaluate the effects of kaolin injection into the cisterna magna, we measured the degree of ventricular dilatation in sections encompassing the PAG by standard cytoarquitectonic stanings (thionin staining). For the LC, immunodetection of the noradrenaline-synthetizing enzyme tyrosine hydroxylase (TH) was performed, due to the noradrenergic nature of the LC neurons. In general, rats with kaolin-induced hydrocephalus presented a higher dilatation of the 4th ventricle, along with a tendency to a higher area of the PAG. Due to the validated role of detection the c-fos protooncogene as a marker of neuronal activation, we also studied neuronal activation in the several subnuclei which compose the PAG, namely the dorsomedial, dorsolateral, lateral and ventrolateral (VLPAG) parts. A decrease in the numbers of neurons immunoreactive for Fos protein (the product of activation of the c-fos protooncogene) was detected in rats injected with kaolin, whereas the remaining PAG subnuclei did not present changes in Fos-immunoreactive nuclei. Increases in the levels of TH in the LC, namely at the rostral parts of the nucleus, were detected in hydrocephalic animals. The following pain-related parameters were measured, namely 1) pain behavioural responses in a validated pain inflammatory test (the formalin test) and 2) the nociceptive activation of spinal cord neurons. A decrease in behavioral responses was detected in rats with kaolin-induced hydrocephalus was detected, namely in the second phase of the test (inflammatory phase). This is the phase of the formalin test in which the motor behaviour is less important, which is important since a semi-quantitative analysis of the motor performance of rats injected with kaolin indicates that these animals may present some motor impairments. Collectively, the results of the behavioral studies indicate that rats with kaolin-induced hydrocephalus exhibit hypoalgesia. A decrease in Fos expression was detected at the superficial dorsal layers of the spinal cord in rats with kaolin-induced hydrocephalus, further indicating that hydrocephalus decreases nociceptive responses. It remains to be ascertained if this is due to alterations in the PAG and LC in the rats with kaolin-induced hydrocephalus, which may affect descending pain modulation. It remains to be evaluated what are the mechanisms underlying the increased pain inhibition at the spinal dorsal horn in the hydrocephalus rats. Regarding the VLPAG, the decrease in neuronal activity may impair descending modulation. Since the LC has higher levels of TH in rats with kaolininduced hydrocephalus, which also appears to increase the noradrenergic innervation in the spinal dorsal horn, it is possible that an increase in the release of noradrenaline at the spinal cord accounts for pain inhibition. Our studies also determine the need to study in detail patients with hydrocephalus namely in what concerns their thresholds to pain and to perform imaging studies focused on the structure and function of pain control areas in the brain.

Functional and molecular characterization of SR45, a plant-specific factor involved in sugar and stress signaling in Arabidopsis thaliana

Dissertation presented to obtain the Ph.D degree in Molecular Biology

A Communication Intervention for Training Southern European Oncologists to Recognize Psychosocial Morbidity in Cancer. I - Development of the Model and Preliminary Results on Physicians' Satisfaction

BACKGROUND: The detection of psychosocial distress is a significant communication problem in Southern Europe and other countries. Work in this area is hampered by a lack of data. Because not much is known about training aimed at improving the recognition of psychosocial disorders in cancer patients, we developed a basic course model for medical oncology professionals. METHODS: A specific educational and experiential model (12 hours divided into 2 modules) involving formal teaching (ie, journal articles, large-group presentations), practice in small groups (ie, small-group exercises and role playing), and discussion in large groups was developed with the aim of improving the ability of oncologists to detect emotional disturbances in cancer patients (ie, depression, anxiety, and adjustment disorders). RESULTS: A total of 30 oncologists from 3 Southern European countries (Italy, Portugal, and Spain) participated in the workshop. The training course was well accepted by most participants who expressed general satisfaction and a positive subjective perception of the utility of the course for clinical practice. Of the total participants, 28 physicians (93.3%) thought that had they been exposed to this material sooner, they would have incorporated the techniques received in the workshop into their practices; 2 participants stated they would likely have done so. Half of the doctors (n = 15) believed that their clinical communication techniques were improved by participating in the workshop, and the remaining half thought that their abilities to communicate with cancer patients had improved. CONCLUSIONS: This model is a feasible approach for oncologists and is easily applicable to various oncology settings. Further studies will demonstrate the effectiveness of this method for improving oncologists skills in recognizing emotional disorders in their patients with cancer.

Criação e atualização de aplicações para área de retalho por MDA

Nos últimos anos tem-se verificado a constante evolução dos mercados em plataformas na Internet como forma de melhoria não só dos serviços prestados, mas também para o aumento de vendas de produtos e respetiva internacionalização dos mesmos. Este aumento da procura por este tipo de softwares, assim como a constante evolução e atualização dos mesmos tem contribuído para que estas aplicações evoluam em termos de funcionalidades e complexidade. Isto contribui cada vez para a dificuldade de formar equipas capazes de manter e desenvolver estes sistemas sem que comprometa em grandes custos para as organizações. Neste sentido surgiram diversas ferramentas que permitem criar soluções pré desenvolvidas de aplicações na Internet denominadas de "E-commerce applications". Estas plataformas, apesar do utilizador não ter obrigatoriamente que deter conhecimentos de programação para proceder à sua instalação, são bastante restritas tanto aos serviços que podem ser usados, e na sua escalabilidade, visto que normalmente correm em servidores específicos e por vezes as configurações necessárias para instalação tornam-se bastante complexas de ser efetuadas. Pretende-se no âmbito desta dissertação de mestrado propor um modelo de uma arquitetura de um sistema baseado em mecanismos MDA para a área de retalho, particularmente em ambientes de e-commerce. Serão inicialmente sistematizados os principais tipos de ecommerce numa perspetiva de evolução histórica. Será igualmente enquadrado o MDA no desenvolvimento de um sistema de e-commerce. Neste sentido, serão equacionadas as diferenças entre o modelo típico de desenvolvimento de software e o desenvolvimento de software orientado pelas metodologias do MDA. No processo de especificação e desenvolvimento do modelo proposto será realizada uma análise de requisitos, assim como, a proposta do modelo da arquitetura de um sistema baseado em mecanismos MDA, tendo como orientação os requisitos e arquitetura definida na fase de análise. Finalmente no sentido de analisar o resultado esperado para um sistema orientado por metodologias definidas por MDA, serão realizado alguns testes no sistema desenvolvido de forma a analisar o seu desempenho e validar a sua adequabilidade no âmbito do processo de desenvolvimento de sistemas e-commerce