Chronic pesticide poisoning from persistent low-dose exposures in Ecuadorean floriculture workers: toward validating a low-cost test battery

Chronic pesticide poisoning is difficult to detect. We sought to develop a low-cost test battery for settings such as Ecuador’s floriculture industry. First we had to develop a case definition; as with all occupational diseases a case had to have both sufficient effective dose and associated health effects. For the former, using canonical discriminant analysis, we found that adding measures of protection and overall environmental stressors to occupational category and duration of exposure was useful. For the latter, factor analysis suggested three distinct manifestations of pesticide poisoning. We then determined sensitivity and specificity of various combinations of symptoms and simple neurotoxicity tests from the Pentox questionnaire, and found that doing so increased sensitivity and specificity compared to use of acethylcholinesterase alone – the current screening standard. While sensitivity and specificity varied with different case definitions, our results support the development of a low-cost test battery for screening in such settings.

Countercyclical regulation in Solvency II: merits and flaws. CEPS Commentary, 25 June 2012

October 2011 saw the latest draft of Solvency II, the European Union’s code for regulation of the insurance industry. This commentary, a collective effort by a group of academics specializing in financial, banking and insurance institutions, argues that the latest proposals need to be drafted again, urgently.

Unleashing Competition in EU Business Services. CEPS Policy Brief No. 284, 24 September 2012

In most EU member states, the business services industry has booked no productivity growth during the last two decades. The industry’s performance in the other member states was weaker than that of its US counterparts. Exploring what may be causing this productivity stagnation, this policy brief reports that weak competition has contributed to the continuing malaise in European business services. The study analyzed the persistence (over time) of firm-level inefficiencies. The evidence further suggests that competition between small firms and large firms in business services is weak. Markets for business services work best in countries with flexible regulation on employment change and with low regulatory costs for firms that start up or close down a business. Countries that are more open to foreign competition perform better in terms of competitive selection and productivity. The policy simulations in this paper show that greater import openness strengthens competition in business services markets. The largest positive impact comes from lower regulatory barriers for growing and shrinking firms. More particularly, competitive selection would be fostered by a reduction of administrative and regulatory costs related to labour contracts, bankruptcy and start-up requirements. A key element of the European Commission’s Europe-2020 strategy is the Single European Market for Services. Business services form one of the largest industries in Europe – and given its productivity stagnation, it deserves to be a priority target of the Europe-2020 strategy. Improving the way the business services market functions may have large positive knock-on effects for the EU economy.

The EU-EFIGE/Bruegel-unicredit dataset. Bruegel Working Paper 2012/13, October 2012

This paper describes the EU-EFIGE/Bruegel-UniCredit dataset (in short the EFIGE dataset), a database recently collected within the EFIGE project (European Firms in a Global Economy: internal policies for external competitiveness) supported by the Directorate General Research of the European Commission through its 7th Framework Programme and coordinated by Bruegel. • The database, for the first time in Europe, combines measures of firms’ international activities (eg exports, outsourcing, FDI, imports) with quantitative and qualitative information on about 150 items ranging from R&D and innovation, labour organisation, financing and organisational activities, and pricing behaviour. Data consists of a representative sample (at the country level for the manufacturing industry) of almost 15,000 surveyed firms (above 10 employees) in seven European economies (Germany, France, Italy, Spain, United Kingdom, Austria, Hungary). Data was collected in 2010, covering the years from 2007 to 2009. Special questions related to the behaviour of firms during the crisis were also included in the survey. • We illustrate the construction and usage of the dataset, capitalising on the experience of researchers who have exploited the data within the EFIGE project. Importantly, the document also reports a comprehensive set of validation measures that have been used to assess the comparability of the survey data with official statistics. A set of descriptive statistics describing the EFIGE variables within (and across) countries and industries is also provided.

Trends and gaps in the academic literature on EU labour migration policies. CEPS Paper in Liberty and Security No. 50/December 2012

This paper provides an overview of the ‘state of the art’ in the academic literature on EU labour migration policies. It forms part of the research agenda of Work Package 18 of the NEUJOBS project, which aims at reviewing legislation and practices regarding the labour market inclusion and protection of rights of different categories of foreign workers in European labour markets. Accordingly, particular attention is paid to the works of scholars who evaluate the status of rights of third-country national workers in relation to labour market access, employment security, social integration, etc., in European legislation on labour immigration. More specifically, the review has selected those scholarly works that focus specifically on analysing the manner in which policy-makers have addressed the granting of rights to non-EU migrant workers, and the manner in which policy agendas – through the relevant political and institutional dynamics – have found their translation in the legislation adopted. This paper consists of two core parts. In the first section, it reviews the works of scholars who have touched on these research questions with respect to the internal dimensions of EU labour migration policies. The second section does the same for the external dimensions of these policies. Both sections start off by analysing the main trends in the literature that reviews these questions for the internal and external dimensions of European migration policies as a whole, and then move on to how these ‘trends’ can (or cannot) be found translated in scholarly writings on labour migration policies more specifically. In the final section, the paper concludes by summarising the main trends and gaps in the literature reviewed, and indicates avenues for further research.

Perceptions of the impacts of genetically modified cotton varieties: a case study of the cotton industry in Gujarat, India

The paper reports the findings of a study designed to consider the impact of the adoption of Bt cotton on markets, businesses, and institutional arrangements in India. Given that evidence to date suggests that widespread adoption of Bt cotton by farmers is likely to increase production, this study aims to assess possible implications for markets (access to inputs, prices of inputs and outputs, etc.) and local industries and to identify potential winners and losers. The results suggest that there are impacts on the cotton industry following from the release of Bt hybrids, and so far the impacts are most noticeable "upstream" (i.e., the input suppliers), where companies are rapidly moving away from the sale of bollworm insecticide and attempting to sell Bt seeds. Seed companies are looking for partnerships with Monsanto, the owner of the Bt gene. One reason that companies are keen to move away from insecticide is so they can avoid the need for credit supply to their customers. Seed purchase is not normally through credit, whereas insecticide purchase is. Issues for companies "downstream" (gins, textile manufacturers) relate more to the better quality of Bt cotton and the need for adequate segregation of Bt and non-Bt cotton.

Autopoietic organization of firm: an illustration for the construction industry

Generally poor productivity, delays, low profitability and exceeded budgets are Common problems in modern construction management, however it seems that a basic obstacle lies far deeper in the understanding of a firm's fundamental mission, its existence. The main objective of this paper therefore is to examine the operational living of a construction firm and by doing that to reveal the key problem or the solution for a construction firm - its organization. A firm as a social system in which interactions between its constitutive components (employees) are surordinated to its maintenance (keeping a system alive) is an autopoietic social system. Two domains of external perturbations are uncovered to which a construction firm has to adapt (market driven and project driven perturbations). Constructed conceptual model of an autopoietic organization is based upon two necessary and sufficient operational domains that a firm has to create in order to become an autopoietic, adaptive social system. The first one is a domain of interactions between employees and other operationally external systems, which is representing an idea-generating domain of interactions. The second is employee's autonomous operational domain, which embodies employee's autonomy and individuality and represents a necessary condition for the establishment of an idea-generating domain. Finally, it is recognized that interactions within these four domains keep a construction firm alive.

Input usage, output mix and industry deregulation: an analysis of the Australian dairy manufacturing industry

In this paper we estimate a Translog output distance function for a balanced panel of state level data for the Australian dairy processing sector. We estimate a fixed effects specification employing Bayesian methods, with and without the imposition of monotonicity and curvature restrictions. Our results indicate that Tasmania and Victoria are the most technically efficient states with New South Wales being the least efficient. The imposition of theoretical restrictions marginally affects the results especially with respect to estimates of technical change and industry deregulation. Importantly, our bias estimates show changes in both input use and output mix that result from deregulation. Specifically, we find that deregulation has positively biased the production of butter, cheese and powders.

Abatement of mercury pollution in the small-scale gold mining industry: Restructuring the policy and research agendas

This paper critiques contemporary research and policy approaches taken toward the analysis and abatement of mercury pollution in the small-scale gold mining sector. Unmonitored releases of mercury from gold amalgamation have caused considerable environmental contamination and human health complications in rural reaches of sub-Saharan Africa, Latin America and Asia. Whilst these problems have caught the attention of the scientific community over the past 15-20 years, the research that has since been undertaken has failed to identify appropriate mitigation measures, and has done little to advance understanding of why contamination persists. Moreover, the strategies used to educate operators about the impacts of acute mercury exposure, and the technologies implemented to prevent farther pollution, have been marginally effective at best. The mercury pollution problem will not be resolved until governments and donor agencies commit to carrying out research aimed at improving understanding of the dynamics of small scale gold mining communities. Acquisition of this knowledge is the key to designing and implementing appropriate support and abatement measures. (c) 2005 Elsevier B.V. All rights reserved.

Alternatives to cyanide in the gold mining industry: what prospects for the future

This paper reviews a series of alternative lixiviant systems for the recovery of gold from ores and concentrates. For over 100 years, cyanide has been the leach reagent of choice in gold mining because of its high gold recoveries, robustness and relatively low costs. The environmental damages resulting from its mismanagement, however, have initiated widespread research aimed at identifying and developing less toxic leaching agents. The most widely-researched alternative lixiviants for gold ores are examined in this paper, but it is evident that none has yet made any significant inroad into the dominant position of cyanide as the reagent of choice at the vast majority of gold mines worldwide. (c) 2005 Published by Elsevier Ltd.

Implications of recent Australian wheat industry developments for overseas and domestic prices

This study is motivated by the proposition that the objectives of the AWB Ltd have changed since semi-privatisation of the Australian Wheat Board under the Wheat Marketing Act, 1989. Conceptualising this change of objectives as a shift from revenue maximization to profit maximization, this study examines the impact of such a change on the pricing policies of a multi-market price-setting firm. More specifically, this paper investigates, using two hypothetical objective functions, a risk averse AWB�s price-setting behaviour in an �overseas� and a �domestic� market in response to recent wheat industry developments. In the analysis these developments manifest themselves as differing price elasticities, differing transport costs and uncertain demand functions, and their implications particularly for the prices paid by domestic consumers are explored.

Plant variety protection in developing countries: A view from the private seed industry in India

Many developing countries are currently engaged in designing and implementing plant variety protection systems. Encouraging private investment in plant breeding is the key rationale for extending intellectual property rights to plant varieties. However, the design of plant variety protection systems in developing countries has been dominated by concerns regarding the inequities of a plant variety protection system, especially the imbalance in the reward structure between plant breeders and farmers. The private seed industry, a key stakeholder in plant variety protection, appears to be playing only a peripheral role in the design of the intellectual property rights regime. This paper explores the potential response of the private seed industry in India to plant variety protection legislation based on a survey of major plant breeding companies. The survey finds that the private seed industry in India is generally unenthusiastic about the legislation and plant variety protection is likely to have only a very limited impact on their research profile and expenditures on plant breeding. Measures designed to curb the 'excessive' profits of breeders, farmers' rights provisions and poor prospects for enforcement of rights are seen to be seriously diluting breeders' rights, leaving few incentives for innovation. If the fundamental objective of plant variety protection is to stimulate private investment in plant breeding, then developing countries need to seriously address the question of improving appropriability of returns from investment.

Measuring construction industry competitiveness: A holistic approach

The link between competitiveness and sustained prosperity of a nation, industry or firm, is a well established argument and serves as the basis for making policy decisions and directing strategic change. The importance of construction industry competitiveness is currently receiving considerable attention from countries such as Finland, Sweden and the UK. This paper critically reviews the existing measures of competitiveness, challenges productivity and profitability as the dominant measures of construction industry competitiveness and introduces a more holistic set of measures that addresses the needs of investors, employees, clients and overall society. The research also reports upon the application of this more holistic set of measures for measuring competitiveness and presents results for the Swedish construction industry. The paper principally sets out to present the preliminary findings of an ongoing research project, which will eventually compare the competitiveness of the Swedish construction industry with that of Finland and the UK.

Contextual prerequisites for the application of ILS principles to the building services industry

Purpose – This paper proposes assessing the context within which integrated logistic support (ILS) can be implemented for whole life performance of building services systems. Design/methodology/approach – The use of ILS within a through-life business model (TLBM) is a better framework to achieve a well-designed, constructed and managed product. However, for ILS to be implemented in a TLBM for building services systems, the practices, tools and techniques need certain contextual prerequisites tailored to suit the construction industry. These contextual prerequisites are discussed. Findings – The case studies conducted reinforced the contextual importance of prime contracting, partnering and team collaboration for the application of ILS techniques. The lack of data was a major hindrance to the full realisation of ILS techniques within the case studies. Originality/value – The paper concludes with the recognition of the value of these contextual prerequisites for the use of ILS techniques within the building industry.

Intelligent wireless web services: context-aware computing in construction-logistics supply chain

The construction industry has incurred a considerable amount of waste as a result of poor logistics supply chain network management. Therefore, managing logistics in the construction industry is critical. An effective logistic system ensures delivery of the right products and services to the right players at the right time while minimising costs and rewarding all sectors based on value added to the supply chain. This paper reports on an on-going research study on the concept of context-aware services delivery in the construction project supply chain logistics. As part of the emerging wireless technologies, an Intelligent Wireless Web (IWW) using context-aware computing capability represents the next generation ICT application to construction-logistics management. This intelligent system has the potential of serving and improving the construction logistics through access to context-specific data, information and services. Existing mobile communication deployments in the construction industry rely on static modes of information delivery and do not take into account the worker’s changing context and dynamic project conditions. The major problems in these applications are lack of context-specificity in the distribution of information, services and other project resources, and lack of cohesion with the existing desktop based ICT infrastructure. The research works focus on identifying the context dimension such as user context, environmental context and project context, selection of technologies to capture context-parameters such wireless sensors and RFID, selection of supporting technologies such as wireless communication, Semantic Web, Web Services, agents, etc. The process of integration of Context-Aware Computing and Web-Services to facilitate the creation of intelligent collaboration environment for managing construction logistics will take into account all the necessary critical parameters such as storage, transportation, distribution, assembly, etc. within off and on-site project.