Corrosion of stainless steel components in seawater reverse osmosis desalination plants-investigations on adapted internal cathodic protection

Stainless steel is widely used in seawater reverse osmosis units (SWRO) for both good mechanical and corrosion resistance properties. However, many corrosion failures of stainless steel in SWRO desalination units have been reported. These failures may often be attributed to un-adapted stainless steel grade selection and/or to the particular aggressive seawater conditions in "warm" regions (high ambient temperature, severe biofouling, etc.). Cathodic protection (CP) is a well-known efficient system to prevent corrosion of metallic materials in seawater. It is successfully used in the oil and gas industry to protect carbon steel structures exposed in open-sea. However, the specific service conditions of SWRO units may seriously affect the efficiency of such anti-corrosion system (high flow rates, large stainless steel surfaces affected by biofouling, confinement limiting protective cathodic current flow, etc.). Hence, CP in SWRO units should be considered with special care and modeling appears as useful tool to assess an appropriate CP design. However, there is a clear lack of CP data that could be transposed to SWRO service conditions (i.e. stainless steel, effect of biofouling, high flow rate, etc.). From this background a Join Industry Program was initiated including laboratory exposures, field measurements in a full scale SWRO desalination plant, and modeling work using PROCOR software. The present paper reviews the main parameters affecting corrosion of stainless steel alloys in seawater reverse osmosis units. CP on specific stainless steel devices was investigated in order to assess its actual efficiency for SWRO units. Severe environmental conditions were intentionally used to promote corrosion on the tested stainless steel products in order to evaluate the efficiency of CP. The study includes a modeling work aiming at predicting and designing adapted CP protection to modeled stainless steel units. An excellent correlation between modeling work and field measurements was found.

Evaluación fisicoquímica y microbiológica del agua potable de la planta potabilizadora del cantón Chordeleg

tratamiento debe ser evaluado y controlado periódicamente, para garantizar su calidad para el consumo humano. El objetivo principal del presente estudio fue evaluar mediante un estudio físico-químico y microbiológico el Sistema de Calidad y Tratamiento del Agua que se efectúa en la Planta Potabilizadora del cantón Chordeleg. Se realizó un estudio no experimental, de campo, descriptivo y de corte no longitudinal. Para el análisis físico-químico se evaluaron 176 muestras en las 8 semanas, realizando 1 muestreo al día. En cada muestreo se realizó el análisis de 11 muestras que corresponden: 2 muestra de agua cruda, 2 muestras de agua pre-filtrada, 6 muestras de agua filtrada y 1 muestra de agua tratada realizándose un total de 22 muestras a la semana, en los cuales se determinó los parámetros físico-químicos: temperatura, sólidos totales disueltos, turbiedad y color, pH, dureza, alcalinidad, hierro, sulfato, nitritos, nitratos y cloro libre residual; parámetros microbiológicos: Coliformes totales y fecales. Los resultados obtenidos en las pruebas realizadas, mediante el análisis estadístico demostraron que los parámetros fisicoquímicos cumplen con lo establecido en la norma INEN 1108-2014, mientras que en los parámetros microbiológicos se estableció que los Coliformes fecales se encuentran dentro del rango establecido por la norma INEN 1108-2014 y los Coliformes totales fuera de lo establecido por la OMS(ausencia).

Ação de anestésicos gerais em canais iônicos

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Biológicas, Departamento de Biologia Molecular, 2016.

Assessment of naproxen adsorption on bone char in aqueous solutions using batch and fixed-bed processes

An integrated analysis of naproxen adsorption on bone char in batch and packed-bed column conditions has been performed. Kinetic, thermodynamic and breakthrough parameters have been calculated using adsorption models and artificial neural networks. Results show that naproxen removal using bone char in batch conditions is a feasible and effective process, which could involve electrostatic and non-electrostatic interactions depending mainly on pH conditions. However, the application of packed-bed column for naproxen adsorption on bone char is not effective for the treatment of diluted solutions due to the low degree of adsorbent utilization (below 4%) at tested operating conditions. The proposed mechanism for naproxen removal using bone char could include a complexation process via phosphate and naproxen, hydrogen bonding and the possibility of hydrophobic interactions via π–π electron. This study highlights the relevance of performing an integrated analysis of adsorbent effectiveness in batch and dynamic conditions to establish the best process configuration for the removal of emerging water pollutants such as pharmaceuticals.

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Projeto, construção e análise de um prototipo vibracional em escala de bancada aplicável ao tratamento de água de produção de petróleo bruto, mediante inovadora operação híbrida de adsorção e auto-flotação

A self-flotator vibrational prototype electromechanical drive for treatment of oil and water emulsion or like emulsion is presented and evaluated. Oil production and refining to obtain derivatives is carried out under arrangements technically referred to as on-shore and off-shore, ie, on the continent and in the sea. In Brazil 80 % of the petroleum production is taken at sea and area of deployment and it cost scale are worrisome. It is associated, oily water production on a large scale, carrier 95% of the potential pollutant of activity whose final destination is the environment medium, terrestrial or maritime. Although diversified set of techniques and water treatment systems are in use or research, we propose an innovative system that operates in a sustainable way without chemical additives, for the good of the ecosystem. Labyrinth adsor-bent is used in metal spirals, and laboratory scale flow. Equipment and process patents are claimed. Treatments were performed at different flow rates and bands often monitored with control systems, some built, other bought for this purpose. Measurements of the levels of oil and grease (OGC) of efluents treaty remained within the range of legal framework under test conditions. Adsorbents were weighed before and after treatment for obtaining oil impregna-tion, the performance goal of vibratory action and treatment as a whole. Treatment technolo-gies in course are referenced, to compare performance, qualitatively and quantitatively. The vibration energy consumption is faced with and without conventional flotation and self-flotation. There are good prospects for the proposed, especially in reducing the residence time, by capillary action system. The impregnation dimensionless parameter was created and confronted with consecrated dimensionless parameters, on the vibrational version, such as Weber number and Froude number in quadratic form, referred to as vibrational criticality. Re-sults suggest limits to the vibration intensity

Effect of gamma-irradiation on total organic carbon and trihalomethane formation potential

This research was conducted to study the use of radiation in water treatment as an alternative to chlorination which has caused health concerns due to the formation of harmful disinfection by-products. Groundwater solutions from the Biscayne aquifer were radiated with Cobalt-60 gamma radiation and studied for changes in dissolved organic carbon (DOC), UV absorbance at 254 nm (UV254), fluorescence and trihalomethane formation potential (THMFP). Molecular fractionations were conducted by ultrafiltration. Effect of the combination of radiation/peroxide was studied for DOC and UV254. Radiation showed significant removal in DOC and THMFP. Similar results were seen in the fluorescence and UV absorbance experiments. Radiation/peroxide did not improve the DOC removal. Radiation of the groundwater samples broke the larger molecular weight fractions in to smaller fractions.

Kinetic analysis of metal uptake by dry and gel alginate particles

The kinetics of metal uptake by gel and dry calcium alginate beads was analysed using solutions of copper or lead ions. Gel beads sorbed metal ions faster than the dry ones and larger diffusivities of metal ions were calculated for gel beads: approximately 10−4 cm2/min vs. 10−6 cm2/min for dry beads. In accordance, scanning electron microscopy and nitrogen adsorption data revealed a low porosity of dry alginate particles. However, dry beads showed higher sorption capacities and a mechanical stability more suitable for large-scale use. Two sorption models were fitted to the kinetic results: the Lagergren pseudo-first order and the Ho and McKay pseudo-second order equations. The former was found to be the most adequate to model metal uptake by dry alginate beads and kinetic constants in the orders of 10−3 and 10−2 min−1 were obtained for lead solutions with concentrations up to 100 g/m3. The pseudo-first order model was also found to be valid to describe biosorbent operation with a real wastewater indicating that it can be used to design processes of metal sorption with alginate-based materials.

Evaluation of dry protonated calcium alginate beads for biosorption applications and studies of lead uptake

Alginate polysaccharide is a promising biosorbent for metal uptake. Dry protonated calcium alginate beads for biosorption applications were prepared, briefly characterized and tested for lead uptake. Several advantages of this biosorbent are reported and discussed in comparison with other alginate-based sorbents. The alginate beads contained 4.7 mmol/g of COOH groups, which suffered hydrolysis near pH 4. The Weber and Morris model, applied to kinetic results of lead uptake, showed that intraparticle diffusion was the rate-controlling step in lead sorption by dry alginate beads. Equilibrium experiments were performed and the data were fitted with different isotherm models. The Langmuir equation was the most adequate to model lead sorption. The maximum uptake capacity (qmax) was estimated as 339 mg/g and the Langmuir constant (b) as 0.84 l/mg. These values were compared with that of other sorbents found in the literature, indicating that dry protonated calcium alginate beads are among the best biosorbents for the treatment and recovery of heavy metals from aqueous streams.

Evaluation of dry protonated calcium alginate beads for biosorption applications and studies of lead uptake

Alginate polysaccharide is a promising biosorbent for metal uptake. Dry protonated calcium alginate beads for biosorption applications were prepared, briefly characterized and tested for lead uptake. Several advantages of this biosorbent are reported and discussed in comparison with other alginate-based sorbents. The alginate beads contained 4.7 mmol/g of COOH groups, which suffered hydrolysis near pH 4. The Weber and Morris model, applied to kinetic results of lead uptake, showed that intraparticle diffusion was the rate-controlling step in lead sorption by dry alginate beads. Equilibrium experiments were performed and the data were fitted with different isotherm models. The Langmuir equation was the most adequate to model lead sorption. The maximum uptake capacity (qmax) was estimated as 339 mg/g and the Langmuir constant (b) as 0.84 l/mg. These values were compared with that of other sorbents found in the literature, indicating that dry protonated calcium alginate beads are among the best biosorbents for the treatment and recovery of heavy metals from aqueous streams.

A comparative study of alginate beads and an ion-exchange resin for the removal of heavy metals from a metal plating effluent

The capacity of dry protonated calcium alginate beads to sorb metals from an industrial effluent was studied and compared with a commercial ion-exchange resin (Lewatit TP 207). Both sorbents decreased zinc, nickel, iron and calcium concentrations in the effluent, and released sodium during treatment. Alginate beads removed lower amounts of heavy metals than the resin, but exhibited faster uptake kinetics. Zinc desorption from the sorbents was achieved in 30 minutes using 0.1 M HCl or 0.1 M H(2)SO(4). Desorption ratios with these acids varied between 90 and 100% for alginate, and 98 to 100% for the ion-exchange resin. Reusability tests with HCl showed that alginate beads can stand acid desorption and recover binding capacity. Overall, the comparison of dry protonated alginate beads with the resin supports the potential of the biosorbent for the treatment of industrial effluents.

Asociación entre factores socioeconómicos y hábitos de limpieza en gestantes de Usaquén y Kennedy de la ciudad de Bogotá

Introducción: Actualmente existe un reconocimiento creciente de que el hogar desempeña un papel importante en varias cuestiones de higiene y salud pública. El ambiente del hogar ha sido implicado como una fuente importante de propagación de enfermedades infecciosas, y la intervención de las medidas de higiene, implican una reducción de la incidencia, especialmente en los países menos desarrollados y en poblaciones vulnerables como las gestantes. Objetivo: Evaluar la asociación entre la práctica de hábitos higiénicos de las gestantes estrato 1 y 2 de las localidades de Usaquén y Kennedy en relación a sus factores socioeconómicos. Métodos: Estudio Analítico de Corte transversal. Se realizó en las gestantes de los estratos 1 y 2 de las localidades de Usaquén y Kennedy en la ciudad de Bogotá. Se recolectaron datos referentes a factores socioeconómicos y hábitos de higiene de 141 gestantes a través de la aplicación de una encuesta. Los datos obtenidos de las variables de interés fueron procesados a través de análisis multivariado y regresión logística paramétrica y no paramétrica, con el fin de establecer si existía asociación o no entre las mismas. Resultados: Existe asociación entre el número de Nacidos vivos y la presencia de plagas (p=0.034 y Coeficiente de correlación: -1.253). Así mismo se encontró asociación habitar en cuartos rentados y la limpieza de casa general (p=0.008 y Coeficiente de correlación: 0.480). Existe una asociación entre la variable edad y el lavado de frutas (p=0.041 y Coeficiente de correlación: 0.384). Conclusiones: Existe relación entre los hábitos higiénicos y los factores socioeconómicos de las gestantes estudiadas. Existe un mayor hábito de lavado de frutas antes de ser consumidas en gestantes de mayor edad. Adicional a esto se evidencia a mayor número de hijos hay menor presencia de plagas en el hogar y mayor limpieza del hogar. Solo en un pequeño porcentaje de los hogares se evidencio una óptima limpieza, por lo cual se deben plantear más políticas para mejorar la higiene de los mismos ya que los datos reportados permanecen subóptimos en la población seleccionada.

APUNTES PARA UN ESTUDIO DE IMPACTO DEL TURISMO EN EL AMBIENTE: EL CASO DE MONTEZUMA, PUNTARENAS

Este artículo desarrolla el diagnostico de los impactos del turismo en el ambiente, en Montezuma, Puntarenas. Se evaluó los efectos de la actividad turísticas en los recursos hídricos, fauna, vegetación y tenencia de la tierra, encontrando que el desarrollo de la actividad, en Montezuma, ha sido sin ninguna planificación y ha venido a alterar la cotidianidad de este pueblo. Aunque se han presentado algunos efectos positivos como son el nacimiento  de una conciencia ambiental entre los diversos grupos de la comunidad, se han desarrollado varios problemas ambientales que están íntimamente ligados a la falta de planificación.Este problema es la alta contaminación del agua, porque no existen sistemas de tratamiento de la misma, además que los antes responsables no supervisan el tratamiento de las aguas tanto potables como servidas en las instalaciones turísticas, las cuales aumentaron aceleradamente durante los últimos cinco años. Por otro lado, se han presentado cambios en el paisaje, han introducido especies exóticas que alteran las condiciones naturales del medio. En cuanto a la tenencia de la tierra en la zona marítima terrestre, ésta se encuentra bajo el dominio de los extranjeros, los costarricenses tienen más números de concesiones pero los extranjeros tienen más superficie (69%). Todos los efectos negativos de turismo en Montezuma, se relaciona con la falta de planificación, por lo que resulta urgente realizar una estrategia de turismo sustentable para el área.ABSTRACTS This article diagnosed the tourism impacts on the environment, in Montezuma, Puntarenas. It e evaluated the effects of tourism in water, wildlife, vegetation and land tenure. It found that tourism in Montezuma have been without planning and it altered the routine life of this town, Even there have been some positive effects like increasing of environmental education, there have been several problems that are very related to the planning lack. Those problems are high water pollution because there is not any system to treat water and also none monitored the water treatment in the hotels, even those increased very fast during the last five years. Changing in the landscape are provoking to loose species even plants or animal, due they have used exotic species in the new hotel. The land tenure in the marine terrestrial zone is controled by foreigners, Costa Ricans have more numbers of concessions but foreigners have more surface (More 69%). Because, all the negative effects of tourism in Montezuma, are related to lack of planning, it is urgent to carry out a management plan for a sustainable tourism in this place.

Caracterización molecular por patrones electroforéticos de isoenzimas esterasas en Lemna aequinoctialis y Lemna valdiviana (lemnaceae) de Costa Rica (ING)

The Lemnaceae family lacks morphologic and anatomical characteristics with comparative aims and for that reason the molecular studies has been necessary a differentiation. In Costa Rica there are two species of Lemna: Lemna aequinoctialis and Lemna valdiviana. With the objective of a molecular characterization and differentiation of both species were extracted isoenzymes esterases. The study was carried out in the Molecular Genetics Laboratory of the School of Biological Sciences at Universidad Nacional, Heredia, Costa Rica. The technical electrophoresis in gel of polyacrylamida SDS-PAGE was used. It was difference in the pattern of isoenzymes between both species. According to previous molecular studies based on morphology and anatomy, flavonoides, isoenzymes, and DNA sequences of certain genes both species are very different; in addition they belong to different monophyletics groups. On the other hand, the importance of this molecular characterization is its possible use in water treatment, because the esterases have had important in the bioremediation. Also, species of the Lemnaceae family are used in the water treatment like bioremediation.