Meta-models, environment and layers: agent-oriented engineering of complex systems

Traditional software engineering approaches and metaphors fall short when applied to areas of growing relevance such as electronic commerce, enterprise resource planning, and mobile computing: such areas, in fact, generally call for open architectures that may evolve dynamically over time so as to accommodate new components and meet new requirements. This is probably one of the main reasons that the agent metaphor and the agent-oriented paradigm are gaining momentum in these areas. This thesis deals with the engineering of complex software systems in terms of the agent paradigm. This paradigm is based on the notions of agent and systems of interacting agents as fundamental abstractions for designing, developing and managing at runtime typically distributed software systems. However, today the engineer often works with technologies that do not support the abstractions used in the design of the systems. For this reason the research on methodologies becomes the basic point in the scientific activity. Currently most agent-oriented methodologies are supported by small teams of academic researchers, and as a result, most of them are in an early stage and still in the first context of mostly \academic" approaches for agent-oriented systems development. Moreover, such methodologies are not well documented and very often defined and presented only by focusing on specific aspects of the methodology. The role played by meta- models becomes fundamental for comparing and evaluating the methodologies. In fact a meta-model specifies the concepts, rules and relationships used to define methodologies. Although it is possible to describe a methodology without an explicit meta-model, formalising the underpinning ideas of the methodology in question is valuable when checking its consistency or planning extensions or modifications. A good meta-model must address all the different aspects of a methodology, i.e. the process to be followed, the work products to be generated and those responsible for making all this happen. In turn, specifying the work products that must be developed implies dening the basic modelling building blocks from which they are built. As a building block, the agent abstraction alone is not enough to fully model all the aspects related to multi-agent systems in a natural way. In particular, different perspectives exist on the role that environment plays within agent systems: however, it is clear at least that all non-agent elements of a multi-agent system are typically considered to be part of the multi-agent system environment. The key role of environment as a first-class abstraction in the engineering of multi-agent system is today generally acknowledged in the multi-agent system community, so environment should be explicitly accounted for in the engineering of multi-agent system, working as a new design dimension for agent-oriented methodologies. At least two main ingredients shape the environment: environment abstractions - entities of the environment encapsulating some functions -, and topology abstractions - entities of environment that represent the (either logical or physical) spatial structure. In addition, the engineering of non-trivial multi-agent systems requires principles and mechanisms for supporting the management of the system representation complexity. These principles lead to the adoption of a multi-layered description, which could be used by designers to provide different levels of abstraction over multi-agent systems. The research in these fields has lead to the formulation of a new version of the SODA methodology where environment abstractions and layering principles are exploited for en- gineering multi-agent systems.

Copper(I) phenanthroline complexes and supramolecular systems containing fullerenes: Photophysics, photochemistry and potential applications in sustainable energy technologies.

Chemistry can contribute, in many different ways to solve the challenges we are facing to modify our inefficient and fossil-fuel based energy system. The present work was motivated by the search for efficient photoactive materials to be employed in the context of the energy problem: materials to be utilized in energy efficient devices and in the production of renewable electricity and fuels. We presented a new class of copper complexes, that could find application in lighting techhnologies, by serving as luminescent materials in LEC, OLED, WOLED devices. These technologies may provide substantial energy savings in the lighting sector. Moreover, recently, copper complexes have been used as light harvesting compounds in dye sensitized photoelectrochemical solar cells, which offer a viable alternative to silicon-based photovoltaic technologies. We presented also a few supramolecular systems containing fullerene, e.g. dendrimers, dyads and triads.The most complex among these arrays, which contain porphyrin moieties, are presented in the final chapter. They undergo photoinduced energy- and electron transfer processes also with long-lived charge separated states, i.e. the fundamental processes to power artificial photosynthetic systems.

Paesaggi agrari. Nuove prospettive per i sistemi territoriali: agricoltura ecologica, saperi tradizionali, scambio locale

Il paesaggio, e così anche il paesaggio agrario, può essere considerato come segno del rapporto uomo/natura, come costrutto storico che testimonia il succedersi delle diverse civilizzazioni che l'hanno generato, ma anche come spazio per l'immaginazione territoriale, come progetto per il futuro del territorio. In questo lavoro si trattano le relazioni tra questa visione del paesaggio e le forme di produzione e consumo dei prodotti agricoli, nell'ambito delle trasformazioni che l'ambito rurale sta subendo a partire dagli ultimi decenni, tra pressione dell'urbano, da un lato, e abbandono e crisi dell'agricoltura, dall'altro. Particolare attenzione è riservata a quelle esperienze che, attraverso la produzione biologica e lo scambio locale, esprimono un nuovo progetto di territorio, che prende avvio dal contesto rurale ma che pervade anche le città, proponendo anche nuove relazioni tra città e campagna. Nelle reti della filiera corta e dell'economia solidale che si concretizzano soprattutto come esperienze “dal basso”, di autogestione e partecipazione, si diffondono insieme prodotti e valori. In quest'ottica la sostenibilità ambientale non appare più come una fonte di limitazioni e esternalità negative, per dirla con il linguaggio dell'economia, ma diventa un valore aggiunto di appartenenza collettiva (equilibri ecologici, paesaggio) e un'occasione per nuove relazioni sociali e territoriali.

Thermochronologic and geodynamic evolution of the Pontides: Sakarya terrane (Karakaya Complex) and Istanbul terrane, Turkey.

An integrated array of analytical methods -including clay mineralogy, vitrinite reflectance, Raman spectroscopy on carbonaceous material, and apatite fission-track analysis- was employed to constrain the thermal and thermochronological evolution of selected portions of the Pontides of northern Turkey. (1) A multimethod investigation was applied for the first time to characterise the thermal history of the Karakaya Complex, a Permo-Triassic subduction-accretion complex cropping out throughout the Sakarya Zone. The results indicate two different thermal regimes: the Lower Karakaya Complex (Nilüfer Unit) -mostly made of metabasite and marble- suffered peak temperatures of 300-500°C (greenschist facies); the Upper Karakaya Complex (Hodul and the Orhanlar Units) –mostly made of greywacke and arkose- yielded heterogeneous peak temperatures (125-376°C), possibly the result of different degree of involvement of the units in the complex dynamic processes of the accretionary wedge. Contrary to common belief, the results of this study indicate that the entire Karakaya Complex suffered metamorphic conditions. Moreover, a good degree of correlation among the results of these methods demonstrate that Raman spectroscopy on carbonaceous material can be applied successfully to temperature ranges of 200-330°C, thus extending the application of this method from higher grade metamorphic contexts to lower grade metamorphic conditions. (2) Apatite fission-track analysis was applied to the Sakarya and the İstanbul Zones in order to constrain the exhumation history and timing of amalgamation of these two exotic terranes. AFT ages from the İstanbul and Sakarya terranes recorded three distinct episodes of exhumation related to the complex tectonic evolution of the Pontides. (i) Paleocene - early Eocene ages (62.3-50.3 Ma) reflect the closure of the İzmir-Ankara ocean and the ensuing collision between the Sakarya terrane and the Anatolide-Tauride Block. (ii) Late Eocene - earliest Oligocene (43.5-32.3 Ma) ages reflect renewed tectonic activity along the İzmir-Ankara. (iii) Late Oligocene- Early Miocene ages reflect the onset and development of the northern Aegean extension. The consistency of AFT ages, both north and south of the tectonic contact between the İstanbul and Sakarya terranes, suggest that such terranes were amalgamated in pre-Cenozoic times. (3) Fission-track analysis was also applied to rock samples from the Marmara region, in an attempt to constrain the inception and development of the North Anatolian Fault system in the region. The results agree with those from the central Pontides. The youngest AFT ages (Late Oligocene - early Miocene) were recorded in the western portion of the Marmara Sea region and reflect the onset and development of northern Aegean extension. Fission-track data from the eastern Marmara Sea region indicate rapid Early Eocene exhumation induced by the development of the İzmir-Ankara orogenic wedge. Thermochronological data along the trace of the Ganos Fault –a segment of the North Anatolian Fault system- indicate the presence of a tectonic discontinuity active by Late Oligocene time, i.e. well before the arrival of the North Anatolian Fault system in the area. The integration of thermochronologic data with preexisting structural data point to the existence of a system of major E-W-trending structural discontinuities active at least from the Late Oligocene. In the Early Pliocene, inception of the present-day North Anatolian Fault system in the Marmara region occurred by reactivation of these older tectonic structures. 


Bedeutung N- und C-terminaler Aminosäuren für die Monomer- und Dimerbildung von Lichtsammelproteinen des Photosystems I

Der LHCI-730 ist ein heterodimerer, Chlorophyll a/b-bindender Lichtsammelkomplex (LHC) des Photosystem I in höheren Pflanzen. Mit Hilfe rekombinanter, modifizierter Proteine wurde untersucht, welche terminalen Bereiche der Untereinheiten Lhca1 und Lhca4 für die Bildung von monomeren und dimeren Lichtsammelproteinen relevant sind. Durch PCR-Mutagenese modifizierte Apoproteine wurden in vitro mit Gesamtpigmentextrakt rekonstituiert und auf ihre Fähigkeit mono- bzw. dimere LHCs zu bilden untersucht.Für die Monomerbildung sind der extrinsische N-Terminus und die der amphipathischen vierten Helix folgenden Aminosäuren beider Proteine für die Faltung stabiler monomerer Pigmentproteinkomplexe nicht notwendig. Die Aminosäuren, mit deren Deletion die Monomerbildung an N- und C-Terminus verhindert wurde, verfügten über geladene (Glu, Asp), aromatische (Trp) oder neutrale Seitenketten (Leu).Die Untersuchungen zur Dimerbildung des LHCI-730 zeigten, daß am N-Terminus des Lhca1 nur bis zu einer Entfernung von drei Aminosäuren (Trp) eine Assemblierung der Untereinheiten möglich ist. Nur Phe (anstatt Trp) war in Substitutionsexperimenten im Vollängenprotein in der Lage, Dimere zu bilden. Das Ausbleiben der Dimerbildung der bis einschließlich zum Trp-39 und Ile-168 verkürzten Deletionsmutanten des Lhca4 ist vermutlich auf die Instabilität dieser Lhca4-Mutanten zurückzuführen. Die Deletion von Trp-185 am C-Terminus des Lhca1 führt zu einem Ausbleiben der Dimerbildung, die aber offensichtlich durch weitere, zuvor schon deletierte Aminosäuren beeinträchtigt wurde.

Complex higher spins, Weyl invariance and tractors

In this thesis work I analyze higher spin field theories from a first quantized perspective, finding in particular new equations describing complex higher spin fields on Kaehler manifolds. They are studied by means of worldline path integrals and canonical quantization, in the framework of supersymmetric spinning particle theories, in order to investigate their quantum properties both in flat and curved backgrounds. For instance, by quantizing a spinning particle with one complex extended supersymmetry, I describe quantum massless (p,0)-forms and find a worldline representation for their effective action on a Kaehler background, as well as exact duality relations. Interesting results are found also in the definition of the functional integral for the so called O(N) spinning particles, that will allow to study real higher spins on curved spaces. In the second part, I study Weyl invariant field theories by using a particular mathematical framework known as tractor calculus, that enable to maintain at each step manifest Weyl covariance.

Untersuchung der Pigment- und Proteinzusammensetzung der peripheren Lichtsammelantenne des Photosystem I

Die Lichtsammelantenne des PSI (LHCI) ist hinsichtlich ihrer Protein- und Pigmentzusammensetzung weniger gut untersucht als die des PSII. Im Rahmen dieser Arbeit wurde deshalb zunächst die Isolation von nativen LHCI-Subkomplexen optimiert und deren Pigmentzusammensetzung untersucht. Zusätzlich wurde die Pigmentbindung analysiert sowie das Pigment/Protein-Verhältnis bestimmt. Die Analyse der Proteinzusammensetzung des LHCI erfolgte mittels einer Kombination aus ein- oder zweidimensionaler Gelelektrophorese mit Westernblotanalysen mit Lhca-Protein-spezifischen Antikörpern und massenspektrometrischen Untersuchungen. Dabei stellte sich heraus, dass der LHCI mehr Proteine bzw. Proteinisoformen enthält als bisher vermutet. So gelang durch die massenspektrometrischen Untersuchungen die Identifizierung zweier bisher noch nicht nachgewiesener Lhca-Proteine. Bei diesen handelt es sich um eine Isoform des Lhca4 und ein zusätzliches Lhca-Protein, das Tomaten-Homolog des Lhca5 von Arabidopsis thaliana. Außerdem wurden in 1D-Gelen Isoformen von Lhca-Proteinen mit unterschiedlichem elektrophoretischen Verhalten beobachtet. In 2D-Gelen trat zusätzlich eine große Anzahl an Isoformen mit unterschiedlichen isoelektrischen Punkten auf. Es ist zu vermuten, dass zumindest ein Teil dieser Isoformen physiologischen Ursprungs ist, und z.B. durch differentielle Prozessierung oder posttranslationale Modifikationen verursacht wird, wenn auch die Spotvielfalt in 2D-Gelen wohl eher auf die Probenaufbereitung zurückzuführen ist. Mittels in vitro-Rekonstitution mit anschließenden biochemischen Untersuchungen und Fluoreszenzmessungen wurde nachgewiesen, dass Lhca5 ein funktioneller LHC mit spezifischen Pigmentbindungseigenschaften ist. Außerdem zeigten in vitro-Dimerisierungsexperimente eine Interaktion zwischen Lhca1 und Lhca5, wodurch dessen Zugehörigkeit zur Antenne des PSI gestützt wird. In vitro-Dimerisierungsexperimente mit Lhca2 und Lhca3 führten dagegen nicht zur Bildung von Dimeren. Dies zeigt, dass die Interaktion in potentiellen Homo- oder Heterodimeren aus Lhca2 und/oder Lhca3 schwächer ist als die zwischen Lhca1 und Lhca4 oder Lhca5. Die beobachtete Proteinheterogenität deutet daraufhin, dass die Antenne des PSI eine komplexere Zusammensetzung hat als bisher angenommen. Für die Integration „neuer“ LHC in den PSI-LHCI-Holokomplex werden zwei Modelle vorgeschlagen: geht man von einer festen Anzahl von LHCI-Monomeren aus, so kann sie durch den Austausch einzelner LHC-Monomere erreicht werden. Als zweites Szenario ist die Bindung zusätzlicher LHC vorstellbar, die entweder indirekt über bereits vorhandene LHC oder direkt über PSI-Kernuntereinheiten mit dem PSI interagieren. In Hinblick auf die Pigmentbindung der nativen LHCI-Subfraktionen konnte gezeigt werden, dass sie Pigmente in einer spezifischen Stöchiometrie und Anzahl binden, und sich vom LHCIIb vor allem durch eine verstärkte Bindung von Chlorophyll a, eine geringere Anzahl von Carotinoiden und die Bindung von ß-Carotin an Stelle von Neoxanthin unterscheiden. Der Vergleich von nativem LHCI mit rekonstituierten Lhca-Proteinen ergab, dass Lhca-Proteine Pigmente in einer spezifischen Stöchiometrie binden, und dass sie Carotinoidbindungsstellen mit flexiblen Bindungseigenschaften besitzen. Auch über die Umwandlung des an die einzelnen Lhca-Proteine gebundenen Violaxanthins (Vio) im Xanthophyllzyklus war nur wenig bekannt. Deshalb wurden mit Hilfe eines in vitro-Deepoxidationssystems sowohl native als auch rekonstituierte LHCI hinsichtlich ihrer Deepoxidationseigenschaften untersucht und der Deepoxidationsgrad von in vivo deepoxidierten Pigment-Protein-Komplexen bestimmt. Aus den Deepoxidationsexperimenten konnte abgeleitet werden, dass in den verschiedenen Lhca-Proteinen unterschiedliche Carotinoidbindungsstellen besetzt sind. Außerdem bestätigten diese Experimente, dass der Xanthophyllzyklus auch im LHCI auftritt, wobei jedoch ein niedrigerer Deepoxidationsgrad erreicht wird als bei LHCII. Dies konnte durch in vitro-Deepoxidationsversuchen auf eine geringere Deepoxidierbarkeit des von Lhca1 und Lhca2 gebundenen Vio zurückgeführt werden. Damit scheint Vio in diesen Lhca-Proteinen eher eine strukturelle Rolle zu übernehmen. Eine photoprotektive Funktion von Zeaxanthin im PSI wäre folglich auf Lhca3 und Lhca4 beschränkt. Damit enthält jede LHCI-Subfraktion ein LHC-Monomer mit langwelliger Fluoreszenz, das möglicherweise am Lichtschutz beteiligt ist. Insgesamt zeigten die Untersuchungen der Pigmentbindung, der Deepoxidierung und der Fluoreszenzeigenschaften, dass sich die verschiedenen Lhca-Proteine in einem oder mehreren dieser Parameter unterscheiden. Dies lässt vermuten, dass schon durch leichte Veränderungen in der Proteinzusammensetzung des LHCI eine Anpassung an unterschiedliche Licht-verhältnisse erreicht werden kann.

I progetti di Oswald Mathias Ungers per la città di Treviri. Questioni di composizione architettonica

Abstract This PhD thesis focuses on two projects carried out by Oswald Mathias Ungers in the city of Trier. More specifi cally, this study focuses on the relationship between composition principles, architectural forms, historical context and the nature of the city where these buildings have been built. The works carried out by Ungers in Trier are unique experiences - if taken in this master’s works context - and each one of them refl ects - in its specifi c project and architectural composition theme - the results - in terms of design - of a complex research on the fundamentals of architecture carried out by Ungers in more than fi ve decades of his activity. The theoretical and compositional experiment aspect is one of the main subjects to defi ne these buildings in terms of architecture. This aspect is so crucial that it is possible to consider them as an example of radical and specifi c experiences, referred to a specifi c place and based on a specifi c theoretical corpus. More specifi cally, this study focuses on the design activity carried out by Ungers in this city, mainly between the 80s and 90s and in the fi rst decade of the 21st century. It puts forward an interpretation that does not only defi ne the essential features, elements and questions lying behind these two architectures, but fi rst and foremost analyzes the theoretical, methodological and compositional relationship between Ungers and Trier, his adopted city. An increasingly closer relationship between the architect and his city highlights the wider relationship network established between the place and the projects carried out by Ungers in this city and makes it possible to understand the importance of Trier in the work of this architect, in his education and in his way to see, think and make architecture. The projects analyzed - the Thermen am Forum Museum (1988-1996) and the Kaiserthermen entrance hall (2003-2007) - were analyzed in terms of their architectural composition in an attempt to highlight the poetry of these architectures and to fi nd out their progressive, rational - and therefore transmissible - character. This study is an attempt to assess and unveil the compositional themes characterizing these projects while detecting the compositional principles lying behind the works and verifying the design process through which such principles were translated into architecture. Looking at these works as architectural composition examples makes it possible to clarify Ungers’ hermeneutic relationship established with the city’s history and structure. More specifi cally, the main subject of this thesis is the relationship between the architect, his city and history in the architectural solutions offered by two exemplary case studies, which were both built and placed in the historical city center of Trier and both connected with the ancient core of the city. The Thermen am Forum Museum and the Kaiserthermen entrance hall projects are - though being developed at different times of Ungers’ architectural life and though being extremely different in terms of approach to their context, due to their architectural image - two works that can be compared with the historical heritage of the city and this makes them ideal examples of the relationship between architectural forms, history and environment.

The stratigraphic record of the quaternary sea level fluctuations and the impact of the post-glacial sea level rise (Termination I) in the Adriatic basin (Mediterranean sea)

The modern stratigraphy of clastic continental margins is the result of the interaction between several geological processes acting on different time scales, among which sea level oscillations, sediment supply fluctuations and local tectonics are the main mechanisms. During the past three years my PhD was focused on understanding the impact of each of these process in the deposition of the central and northern Adriatic sedimentary successions, with the aim of reconstructing and quantifying the Late Quaternary eustatic fluctuations. In the last few decades, several Authors tried to quantify past eustatic fluctuations through the analysis of direct sea level indicators, among which drowned barrier-island deposits or coral reefs, or indirect methods, such as Oxygen isotope ratios (δ18O) or modeling simulations. Sea level curves, obtained from direct sea level indicators, record a composite signal, formed by the contribution of the global eustatic change and regional factors, as tectonic processes or glacial-isostatic rebound effects: the eustatic signal has to be obtained by removing the contribution of these other mechanisms. To obtain the most realistic sea level reconstructions it is important to quantify the tectonic regime of the central Adriatic margin. This result has been achieved integrating a numerical approach with the analysis of high-resolution seismic profiles. In detail, the subsidence trend obtained from the geohistory analysis and the backstripping of the borehole PRAD1.2 (the borehole PRAD1.2 is a 71 m continuous borehole drilled in -185 m of water depth, south of the Mid Adriatic Deep - MAD - during the European Project PROMESS 1, Profile Across Mediterranean Sedimentary Systems, Part 1), has been confirmed by the analysis of lowstand paleoshorelines and by benthic foraminifera associations investigated through the borehole. This work showed an evolution from inner-shelf environment, during Marine Isotopic Stage (MIS) 10, to upper-slope conditions, during MIS 2. Once the tectonic regime of the central Adriatic margin has been constrained, it is possible to investigate the impact of sea level and sediment supply fluctuations on the deposition of the Late Pleistocene-Holocene transgressive deposits. The Adriatic transgressive record (TST - Transgressive Systems Tract) is formed by three correlative sedimentary bodies, deposited in less then 14 kyr since the Last Glacial Maximum (LGM); in particular: along the central Adriatic shelf and in the adjacent slope basin the TST is formed by marine units, while along the northern Adriatic shelf the TST is represented by costal deposits in a backstepping configuration. The central Adriatic margin, characterized by a thick transgressive sedimentary succession, is the ideal site to investigate the impact of late Pleistocene climatic and eustatic fluctuations, among which Meltwater Pulses 1A and 1B and the Younger Dryas cold event. The central Adriatic TST is formed by a tripartite deposit bounded by two regional unconformities. In particular, the middle TST unit includes two prograding wedges, deposited in the interval between the two Meltwater Pulse events, as highlighted by several 14C age estimates, and likely recorded the Younger Dryas cold interval. Modeling simulations, obtained with the two coupled models HydroTrend 3.0 and 2D-Sedflux 1.0C (developed by the Community Surface Dynamics Modeling System - CSDMS), integrated by the analysis of high resolution seismic profiles and core samples, indicate that: 1 - the prograding middle TST unit, deposited during the Younger Dryas, was formed as a consequence of an increase in sediment flux, likely connected to a decline in vegetation cover in the catchment area due to the establishment of sub glacial arid conditions; 2 - the two-stage prograding geometry was the consequence of a sea level still-stand (or possibly a fall) during the Younger Dryas event. The northern Adriatic margin, characterized by a broad and gentle shelf (350 km wide with a low angle plunge of 0.02° to the SE), is the ideal site to quantify the timing of each steps of the post LGM sea level rise. The modern shelf is characterized by sandy deposits of barrier-island systems in a backstepping configuration, showing younger ages at progressively shallower depths, which recorded the step-wise nature of the last sea level rise. The age-depth model, obtained by dated samples of basal peat layers, is in good agreement with previous published sea level curves, and highlights the post-glacial eustatic trend. The interval corresponding to the Younger Dyas cold reversal, instead, is more complex: two coeval coastal deposits characterize the northern Adriatic shelf at very different water depths. Several explanations and different models can be attempted to explain this conundrum, but the problem remains still unsolved.

Migration strategies from IPv4 to IPv6 in a complex service provider environment

Progettazione ed implementazione di una strategia di migrazione da IPv4 a IPv6 in una realtà complessa come quella del consorzio interuniversitario CINECA. Sono stati presi in considerazione sia i livelli di rete e trasporto, sia il livello applicativo, cercando di fornire una visione completa delle problematiche incontrate. La strategia di migrazione scelta comprende le scelte tecniche fino ad ora implementate dal CINECA e i successivi passi che verranno intrapresi in futuro.

Celti e Reti tra V e I sec. a.C. Oggetti tipo LaTène all'interno della cerchia culturale Fritzens-Sanzeno (arco alpino centro-orientale)

The study of the objects LaTène type found in middle-eastern alpine region (Trentino Alto Adige-Südtirol, Engadina, North Tirol, Voralberg and Villach basin) is aimed to a better comprehension of the complex net of relationships established among the Celts, settled both in the central Europe territories and, since the IV century b.C., in the Po Plain, and the local populations. The ancient authors, who called the inhabitants of this area Raeti, propose for this territory the usual pattern according to which, the population of a region was formed consequently to a migration or was caused by the hunting of pre-existing peoples. The archaeologists, in the last thirty years, recognized a cultural facies typical of the middle-eastern alpine territory during the second Iron Age, and defined that as Fritzens-Sanzeno culture (from the sites of Fritzens, Inn valley, and Sanzeno, Non Valley). The so-called Fritzens-Sanzeno culture spread out without breaks from the material culture of the final Bronze Age and the first Iron Age. This local substratum, characterized by a ceramic repertoire strongly standardized, by peculiar architectural solutions and by a particular typology of rural sacred places (Brandopferplätze), accepted, above all during the second Iron Age, the strong influences coming from the Etruscan world and from the Celtic one (evident in the presence of objects of ornament, of glass artefacts, of elements of the weaponry and of coins). The objects LaTène type become, with different degrees of reliability, important markers of the relationships existing between the Celts and the Raeti, although the ways of interaction (cultural influence, people's movements, commercial exchanges, gifts among élites etc.) is not still clear. The revision of published data and the study of unpublished materials allows to define a rich and articulated picture both to chronological level and to territorial one.

Work and Family: a complex interplay. An Italian application of the DISC Model on health care workers

The present thesis investigates the issue of work-family conflict and facilitation in a sanitarian contest, using the DISC Model (De Jonge and Dormann, 2003, 2006). The general aim has been declined in two empirical studies reported in this dissertation chapters. Chapter 1 reporting the psychometric properties of the Demand-Induced Strain Compensation Questionnaire. Although the empirical evidence on the DISC Model has received a fair amount of attention in literature both for the theoretical principles and for the instrument developed to display them (DISQ; De Jonge, Dormann, Van Vegchel, Von Nordheim, Dollard, Cotton and Van den Tooren, 2007) there are no studies based solely on psychometric investigation of the instrument. In addition, no previous studies have ever used the DISC as a model or measurement instrument in an Italian context. Thus the first chapter of the present dissertation was based on psychometric investigation of the DISQ. Chapter 2 reporting a longitudinal study contribution. The purpose was to examine, using the DISC model, the relationship between emotional job characteristics, work-family interface and emotional exhaustion among a health care population. We started testing the Triple Match Principle of the DISC Model using solely the emotional dimension of the strain-stress process (i.e. emotional demands, emotional resources and emotional exhaustion). Then we investigated the mediator role played by w-f conflict and w-f facilitation in relation to emotional job characteristics and emotional exhaustion. Finally we compared the mediator model across workers involved in chronic illness home demands and workers who are not involved. Finally, a general conclusion, integrated and discussed the main findings of the studies reported in this dissertation.

Le società pubbliche a partecipazione regionale e locale operanti nei settori dei servizi pubblici locali e dei servizi “strumentali” e quelle con scopo lucrativo: la recente evoluzione legislativa, gli ambiti di attività ed i relativi limiti, le prospettive future.

Con la prima parte, si intende fornire un quadro pressoché esaustivo delle principali disposizioni in materia di società a partecipazione pubblica regionale e locale operanti nel campo dei servizi pubblici locali e della loro interpretazione giurisprudenziale e dottrinale, prendendo le mosse dagli ultimi interventi legislativo. Nella seconda parte, si affronta, invece, il tema dei limiti legislativi alla capacità di azione delle società a partecipazione pubblica e dei connessi dubbi interpretativi, anche alla luce degli orientamenti giurisprudenziali e dottrinali. In particolare, l’analisi riguarda l’art. 13 del decreto”Bersani” e il comma 9 dell’art. 23 bis (ora pedissequamente trasfuso nel comma 33 dell’art. 4 del d.l. n. 138/2011), ossia le principali disposizioni che definiscono, rispettivamente, la capacità di azione delle società (a partecipazione pubblica) strumentali e di quelle operanti nel campo dei servizi pubblici locali titolari di affidamenti diretti (assentiti con modalità diverse dall’evidenza pubblica). Vengono forniti cenni di inquadramento in relazione al cd. procedimento di riordino delle partecipazioni societarie pubbliche previsto dalla legge finanziaria del 2008 (art. 3, commi 27 – 32). Dal combinato disposto delle suddette norme, così come interpretate dalla giurisprudenza costituzionale ed amministrativa, si ricavano, poi, utili indicazioni in ordine alla possibilità, per gli enti pubblici territoriali, di costituire società con scopo meramente lucrativo (ossia, soggetti societari privi del rapporto di strumentalità con gli enti costituenti o partecipanti, chiamati ad operare, in regime di concorrenza, in settori completamente liberalizzati) e società cd. multiutilities (aventi oggetto sociale complesso, la cui attività si estrinseca tanto nel campo dei servizi strumentali, quanto in quello dei servizi pubblici locali), nonché in relazione alla disciplina applicabile all’attività di detti soggetti societari. La finalità ultima del contributo consiste nell'individuazione delle linee guida finalizzate alla classificazione delle società pubbliche in funzione della loro attività.

Analysis of the influence of epitope flanking regions on MHC class I restricted antigen presentation

Peptides presented by MHC class I molecules for CTL recognition are derived mainly from cytosolic proteins. For antigen presentation on the cell surface, epitopes require correct processing by cytosolic and ER proteases, efficient TAP transport and MHC class I binding affinity. The efficiency of epitope generation depends not only on the epitope itself, but also on its flanking regions. In this project, the influence of the C-terminal region of the model epitope SIINFEKL (S8L) from chicken ovalbumin (aa 257-264) on antigen processing has been investigated. S8L is a well characterized epitope presented on the murine MHC class I molecule, H-2Kb. The Flp-In 293Kb cell line was transfected with different constructs each enabling the expression of the S8L sequence with different defined C-terminal flanking regions. The constructs differed at the two first C-terminal positions after the S8L epitope, so called P1’ and P2’. At these sites, all 20 amino acids were exchanged consecutively and tested for their influence on H-2Kb/S8L presentation on the cell surface of the Flp-In 293Kb cells. The detection of this complex was performed by immunostaining and flow cytometry. The prevailing assumption is that proteasomal cleavages are exclusively responsible for the generation of the final C-termini of CTL epitopes. Nevertheless, recent publications showed that TPPII (tripeptidyl peptidase II) is required for the generation of the correct C-terminus of the HLA-A3-restricted HIV epitope Nef(73-82). With this background, the dependence of the S8L generation on proteasomal cleavage of the designed constructs was characterized using proteasomal inhibitors. The results obtained indicate that it is crucial for proteasomal cleavage, which amino acid is flanking the C-terminus of an epitope. Furthermore, partially proteasome independent S8L generation from specific S8L-precursor peptides was observed. Hence, the possibility of other existing endo- or carboxy-peptidases in the cytosol that could be involved in the correct trimming of the C-terminus of antigenic peptides for MHC class I presentation was investigated, performing specific knockdowns and using inhibitors against the target peptidases. In parallel, a purification strategy to identify the novel peptidase was established. The purified peaks showing an endopeptidase activity were further analyzed by mass spectrometry and some potential peptidases (like e.g. Lon) were identified, which have to be further characterized.

Monitoring Complex Processes to Verify System Conformance: A Declarative Rule-Based Framework

Over the last 60 years, computers and software have favoured incredible advancements in every field. Nowadays, however, these systems are so complicated that it is difficult – if not challenging – to understand whether they meet some requirement or are able to show some desired behaviour or property. This dissertation introduces a Just-In-Time (JIT) a posteriori approach to perform the conformance check to identify any deviation from the desired behaviour as soon as possible, and possibly apply some corrections. The declarative framework that implements our approach – entirely developed on the promising open source forward-chaining Production Rule System (PRS) named Drools – consists of three components: 1. a monitoring module based on a novel, efficient implementation of Event Calculus (EC), 2. a general purpose hybrid reasoning module (the first of its genre) merging temporal, semantic, fuzzy and rule-based reasoning, 3. a logic formalism based on the concept of expectations introducing Event-Condition-Expectation rules (ECE-rules) to assess the global conformance of a system. The framework is also accompanied by an optional module that provides Probabilistic Inductive Logic Programming (PILP). By shifting the conformance check from after execution to just in time, this approach combines the advantages of many a posteriori and a priori methods proposed in literature. Quite remarkably, if the corrective actions are explicitly given, the reactive nature of this methodology allows to reconcile any deviations from the desired behaviour as soon as it is detected. In conclusion, the proposed methodology brings some advancements to solve the problem of the conformance checking, helping to fill the gap between humans and the increasingly complex technology.