1000 resultados para ODP
Resumo:
Cool tropical sea surface temperatures (SSTs) are reported for warm Paleogene greenhouse climates based on the d18O of planktonic foraminiferal tests. These results are difficult to reconcile with models of greenhouse gas-forced climate. It has been suggested that this "cool tropics paradox" arises from postdepositional alteration of foraminiferal calcite, yielding erroneously high d18O values. Recrystallization of foraminiferal tests is cryptic and difficult to quantify, and the compilation of robust d18O records from moderately altered material remains challenging. Scanning electron microscopy of planktonic foraminiferal chamber-wall cross sections reveals that the basal area of muricae, pustular outgrowths on the chamber walls of species belonging to the genus Morozovella, contain no mural pores and may be less susceptible to postdepositional alteration. We analyzed the d18O in muricae bases of morozovellids from the central Pacific (Ocean Drilling Program Site 865) by ion microprobe using 10 ?m pits with an analytical reproducibility of ±0.34 per mil (2 standard deviations). In situ measurements of d18O in these domains yield consistently lower values than those published for conventional multispecimen analyses. Assuming that the original d18O is largely preserved in the basal areas of muricae, this new d18O record indicates Early Paleogene (~49-56 Ma) tropical SSTs in the central Pacific were 4°-8°C higher than inferred from the previously published d18O record and that SSTs reached at least ~33°C during the Paleocene-Eocene thermal maximum. This study demonstrates the utility of ion microprobe analysis for generating more reliable paleoclimate records from moderately altered foraminiferal tests preserved in deep-sea sediments.
Resumo:
Middle Eocene to Late Oligocene sediments from near the crest (Site 689B, water depth 2080 m) and flank (water depth 2914 m) of the Maud Rise (62°S) have been investigated by coarse fraction analysis and have revealed the following: (1) The middle Eocene (50-40 Ma) was a period of pure carbonate sedimentation, with good preservation of carbonate microfossils. No opal > 40 µm is present. (2) In the late Eocene (40-36.5 Ma) opal fossils (mainly radiolaria, and some diatoms > 40 µm) appeared for the first time. Three maxima in opal sedimentation (Eocene/Oligocene boundary, middle early Oligocene and early/late Oligocene boundary) are separated by increases in carbonate sedimentation. The dissolution of carbonate fossils is strong in the opal-rich layers. Opal sedimentation is attributed to cooling and probably more vigorous atmospheric circulation and increased upwelling. (3) Carbonate dissolution increased with water depth in the Oligocene, whereas in the middle Eocene excellent carbonate preservation in the deeper Site 690B and stronger dissolution in the shallower Site 689B is attributed to different bottom-water characteristics. The middle Eocene bottom water probably was formed by strong evaporation at low latitudes, whereas by the earliest Oligocene formation of Antarctic Bottom Water (AABW) had set in. (4) Current influence, not on top but on the flank of the Maud Rise, could be recorded by means of larger grain sizes of benthonic and planktonic microfossils. (5) Ice-rafted debris was not found. Quartz and other minerals are very rare and not larger than 125 µm and may have been supplied by ice as well as by wind or by deep currents. Mica contents were up to 10 times higher in the middle Eocene on the flank compared to on the crest of the Maud Rise, indicating deep current supply.
Resumo:
We use Nomarski differential interference contrast imaging to reveal the wealth of complex detail in plagioclase zoning for selected samples from Sites 834, 839, and 841. All sites contain some plagioclase with the very complex internal core zoning, convolute zoning, or very fine-scale euhedral oscillatory zoning of the sort generally considered typical of island-arc volcanic rocks. Plagioclase with contrasted zoning styles may coexist within a single lithologic unit or even within a single thin section. Especially notable is the presence of scattered plagioclase phenocrysts with complex zoning throughout Unit 7 in Hole 834B, which in other respects is relatively uniform in composition and appears to have had little or no differential sorting of crystals and liquid. Although our study is by no means comprehensive, it is sufficient to indicate that magmatic conditions have been variable during crystallization of these rocks, and mixing or at least minor contamination may be required to explain some of the relations observed. By analogy with experimental studies, it is possible that variations in water content, either over time or within different parts of a chamber or conduit system, have contributed to the observed contrasts in zoning.
Resumo:
A knowledge of rock stress is fundamental for improving our understanding of oceanic crustal mechanisms and lithospheric dynamic processes. However, direct measurements of stress in the deep oceans, and in particular stress magnitudes, have proved to be technically difficult. Anelastic strain recovery measurements were conducted on 15 basalt core samples from Sites 765 and 766 during Leg 123. Three sets of experiments were performed: anelastic strain recovery monitoring, dynamic elastic property measurements, and thermal azimuthal anisotropy observations. In addition, a range of other tests and observations were recorded to characterize each of the samples. One common feature of the experimental results and observations is that apparently no consistent orientation trend exists, either between the different measurements on each core sample or between the same sets of measurements on the various core samples. However, some evidence of correspondence between velocity anisotropy and anelastic strain recovery exists, but this is not consistent for all the core samples investigated. Thermal azimuthal anisotropy observations, although showing no conclusive correlations with the other results, were of significant interest in that they clearly exhibited anisotropic behavior. The apparent reproducibility of this behavior may point toward the possibility of rocks that retain a "memory" of their stress history, which could be exploited to derive stress orientations from archived core. Anelastic strain recovery is a relatively new technique. Because use of the method has extended to a wider range of rock types, the literature has begun to include examples of rocks that contracted with time. Strong circumstantial evidence exists to suggest that core-sample contractions result from the slow diffusion of pore fluids from a preexisting microcrack structure that permits the rock to deflate at a greater rate than the expansion caused by anelastic strain recovery. Both expansions and contractions of the Leg 123 cores were observed. The basalt cores have clearly been intersected by an abundance of preexisting fractures, some of which pass right through the samples, but many are intercepted or terminate within the rock matrix. Thus, the behavior of the core samples will be influenced not only by the properties of the rock matrix between the fractures, but also by how these macro- and micro-scale fractures mutually interact. The strain-recovery curves recorded during Leg 123 for each of the 15 basalt core samples may reflect the result of two competing time dependent processes: anelastic strain recovery and pore pressure recovery. Were these the only two processes to influence the gauge responses, then one might expect that given the additional information required, established theoretical models might be used to determine consistent stress orientations and reliable stress magnitudes. However, superimposed upon these competing processes is their respective interaction with the preexisting fractures that intersect each core. Evidence from our experiments and observations suggests that these fractures have a dominating influence on the characteristics of the recovery curves and that their effects are complex.
Resumo:
The occurrences of ten datum events for the Quaternary and top Pliocene nannofossils are identified at nine Leg 115 sites. A quantitative investigation of Paleogene nannofossils in 470 samples selected from 11 holes at 9 sites yielded 197 taxa, including one new species and 10 unidentified taxa that are likely to be new species. Regional differences in the timing of some biostratigraphically important events are recognized, and a set of datum events useful for biostratigra- phy in the tropical Indian Ocean is presented. Biogeographical differences are minor for Paleogene cores from the tropical sites (Sites 707-716); however, the Quaternary and late early Oligocene floras observed at the two subtropical sites (Sites 705 and 706) differ significantly from the corresponding floras of the tropical sites. Bathymetrically controlled dissolution is recognized by the reduction of species diversity in the Paleogene flora. Selective dissolution of nannofossils is also evidenced by the percentage reduction of three holococcolith taxa, Lanternithus minutus, Zygrhablithus bijugatus, and Holococcolith type A as well as by the increase of Coccolithus pelagicusand Cribrocentrum reticulatumin the deeper sites.
Resumo:
Calcareous nannofossil and planktic foraminiferal assemblages from ODP Hole 1210A in the northwestern Pacific Ocean were used to reconstruct surface-water conditions for the past 500 kyr. Stratigraphic control was provided by calcareous nannofossil events that are thought to be synchronous over a broad range of latitudes. Calcareous nannofossil and planktic foraminiferal assemblages and abundance patterns indicate the unlikelihood of long term (Milankovitch-scale) latitudinal shifts of the Kuroshio Extension over the last 500 kyr and illustrate two successive surface water-mass states, one that prevailed prior to 300 ka and one that existed after 300 ka. The relative abundance of very small placoliths and the absolute abundance of the upper photic zone (UPZ) coccolith species decrease abruptly at approximately 300 ka. The relative abundance of the lower photic zone (LPZ) species Florisphaera profunda greatly increases at the same time, although intervals during which the relative abundance of this taxon is very low or absent also occur prior to 300 ka. The absolute abundance of planktic foraminifera gradually increased after the 300-ka boundary, including peaks of Globoconella inflata. These assemblage and abundance changes suggest significant modifications to the surface water-mass structure. Surface water was weakly stratified prior to 300 ka, but alternated between intensely stratified and vertically mixed after 300 ka. Changes in the surface water-mass structure suggest an intensification of the East Asian summer and winter monsoon after 300 ka.
Resumo:
Other than halite diagenesis and organic matter degradation, Cl- and Br- are considered to be conservative in marine pore fluids. Consequently, Br-/Cl- ratios should remain constant during most diagenetic reactions. Nonetheless, Br-/Cl- molar ratios decrease to 0.00127 (~18% less than seawater value) in pore fluids from Site 833 in the Aoba Basin of the New Hebrides convergent margin despite the lack of halite diagenesis and little organic matter. Sediment at this site is largely volcanic ash, which becomes hydrated with depth as it converts to clay and zeolite minerals. These hydration reactions remove sufficient water to increase the concentrations of most solutes including Cl- and Br-. The resulting concentration gradients drive diffusion, but calculations indicate that diffusion does not decrease the Br-/Cl- ratio. Some Cl- may be leached from the ash, but insufficient amounts are available to cause the observed decrease in Br-/Cl- ratio. The limited source of Cl- suggests that proportionately more Br- than Cl- is lost from the fluids to the diagenetic solids. Similar nonconservative behavior of Cl- and Br- may occur during fluid circulation at ridge crests and flanks, thereby influencing the halide distribution in the crust.
Resumo:
Sediments recovered during Ocean Drilling Program (ODP) Leg 123 from the Argo Abyssal Plain (AAP) consist largely of turbidites derived from the adjacent Australian continental margin. The oldest abundant turbidites are Valanginian-Aptian in age and have a mixed (smarl) composition; they contain subequal amounts of calcareous and siliceous biogenic components, as well as clay and lesser quartz. Most are thin-bedded, fine sand- to mud-sized, and best described by Stow and Piper's model (1984) for fine-grained biogenic turbidites. Thicker (to 3 m), coarser-grained (medium-to-coarse sand-sized) turbidites fit Bouma's model (1962) for sandy turbidites; these generally are base-cut-out (BCDE, BDE) sequences, with B-division parallel lamination as the dominant structure. Parallel laminae most commonly concentrate quartz and/or calcispheres vs. lithic clasts or clay, but distinctive millimeter- to centimeter-thick, radiolarian-rich laminae occur in both fine- and coarse-grained Valanginian-Hauterivian turbidites. AAP turbidites were derived from relatively deep parts of the continental margin (outer shelf, slope, or rise) that lay below the photic zone, but above the calcite compensation depth (CCD). Biogenic components are largely pelagic (calcispheres, foraminifers, radiolarians, nannofossils); lesser benthic foraminifers are characteristic of deep-water (abyssal to bathyal) environments. Abundant nonbiogenic components are mostly clay and clay clasts; smectite is the dominant clay species, and indicates a volcanogenic provenance, most likely the Triassic-Jurassic volcanic suite exposed along the northern Exmouth Plateau. Lower Cretaceous smarl turbidites were generated during eustatic lowstands and may have reached the abyssal plain via Swan Canyon, a submarine canyon thought to have formed during the Late Jurassic. In contrast to younger AAP turbidites, however, Lower Cretaceous turbidites are relatively fine-grained and do not contain notably older reworked fossils. Early in its history, the northwest Australian margin provided mainly contemporaneous slope sediment to the AAP; marginal basins adjacent to the continent trapped most terrigenous detritus, and pronounced canyon incisement did not occur until Late Cretaceous and, especially, Cenozoic time.