On the applicability of joint inversion of gravity and resistivity data to the study of a tectonic sedimentary basin in Northern Portugal

The Chaves basin is a pull-apart tectonic depression implanted on granites, schists, and graywackes, and filled with a sedimentary sequence of variable thickness. It is a rather complex structure, as it includes an intricate network of faults and hydrogeological systems. The topography of the basement of the Chaves basin still remains unclear, as no drill hole has ever intersected the bottom of the sediments, and resistivity surveys suffer from severe equivalence issues resulting from the geological setting. In this work, a joint inversion approach of 1D resistivity and gravity data designed for layered environments is used to combine the consistent spatial distribution of the gravity data with the depth sensitivity of the resistivity data. A comparison between the results from the inversion of each data set individually and the results from the joint inversion show that although the joint inversion has more difficulty adjusting to the observed data, it provides more realistic and geologically meaningful models than the ones calculated by the inversion of each data set individually. This work provides a contribution for a better understanding of the Chaves basin, while using the opportunity to study further both the advantages and difficulties comprising the application of the method of joint inversion of gravity and resistivity data.

HEAD LICE IN HAIR SAMPLES FROM YOUTHS, ADULTS AND THE ELDERLY IN MANAUS, AMAZONAS STATE, BRAZIL

A study of head lice infestations among young people, adults and elderly individuals was conducted from August 2010 to July 2013 in Manaus, AM, Northern Brazil. Hair samples collected from 1,860 individuals in 18 barber shops and beauty parlors were examined for the ectoparasite. The occurrence of pediculosis and its association with factors, such as sex, age, ethnicity, hair characteristics and the socioeconomic profile of salon customers, salon location and seasonal variation were determined. The overall occurrence rate was 2.84%. Occurrence was higher in hair samples from non-blacks and the elderly. Higher occurrence was also observed during kindergarten, elementary and junior education school holidays. The results indicate that the occurrence of head lice among young people, adults and the elderly in Manaus is relatively low compared to that determined in children and in other regions of the country. After children, the elderly were the most affected. The study also indicated the need to adopt additional procedures to improve surveys among the population with low or no purchasing power, which is usually the most affected by this ectoparasitic disease.

Influence of the molecular weight in mechanical properties and degradation kinetics of chitosan inverted colloidal crystals

Tissue engineering arises from the need to regenerate organs and tissues, requiring the development of scaffolds, which can provide an optimum environment for tissue growth. In this work, chitosan with different molecular weights was used to develop biodegradable 3D inverted colloidal crystals (ICC) structures for bone regeneration, exhibiting uniform pore size and interconnected network. Moreover, in vitro tests were conducted by studying the influence of the molecular weight in the degradation kinetics and mechanical properties. The production of ICC included four major stages: fabrication of microspheres; assembly into a cohesive structure, polymeric solution infiltration and microsphere removal. Chitosan’s degree of deacetylation was determined by infrared spectroscopy and molecular weight was obtained via capillary viscometry. In order to understand the effect of the molecular weight in ICC structures, the mass loss and mechanical properties were analyzed after degradation with lysozyme. Structure morphology observation before and after degradation was performed by scanning electron microscopy. Cellular adhesion and proliferation tests were carried out to evaluate ICC in vitro response. Overall, medium molecular weight ICC revealed the best balance in terms of mechanical properties, degradation rate, morphology and biological behaviour.

Characterization tests for insulation boards made from corn cob and natural glues

In recent years there has been a growing interest in developing news solutions for more ecologic and efficient construction, including natural, renewable and local materials, thus contributing in the search for more efficient, economic and environmentally friendly construction. Several authors have assessed the possibility of using various agricultural sub products or wastes, as part of the effort of the scientific community to find alternative and more ecologic construction materials. Corn cob is an agricultural waste from a very important worldwide crop. Natural glues are made from natural materials, non-mineral, that can be used as such or after some modifications to achieve the behaviour and performance required. Two examples of these natural glues are casein and wheat flour-based glues that were used in the present study. Boards with different compositions were manufactured, having as variables the type of glue, the dimension of the corn cob particles and the features of the pressing process. The tests boards were characterized with physical and mechanical tests, such as thermal conductivity (λ) with a ISOMET 2104 and 60 mm diameter contact probe, density (ρ) based on EN 1602:2013, surface hardness (SH) with a PCE Shore A durometer, surface resistance (SR) with a PROCEQ PT pendular sclerometer, bending behaviour (σ) based on EN 12089:2013, compression behaviour (σ10) based on EN 826:2013 and resilience (R) based on EN 1094-1:2008, with a Zwick Rowell bending equipment with 2 kN and 50 kN load cells (Fig. 1), dynamic modulus of elasticity (Ed) with a Zeus Resonance Meter equipment (Fig. 5) based on NP EN 14146:2006 and water vapour permeability (δ) based on EN 12086:2013. The various boards produced were characterized according to the tests and the ones with the best results were C8_c8 (casein glue, grain size 2,38-4,76 mm, cold pressing for 8 hours), C8_c4 (casein glue, grain size 2,38-4,76 mm, cold pressing for 4 hours), F8_h0.5 (wheat flour glue, grain size 2,38-4,76 mm, hot pressing for 0,5 hours), FEV8_h0.5 (wheat flour, egg white and vinegar glue, grain size 2,38-4,76 mm, hot pressing for 0,5 hours) and FEVH68_c4 (wheat flour, egg white, vinegar and 6 g of sodium hydroxide glue, grain size 2,38-4,76 mm, cold pressing for 4 hours). Taking into account the various boards produced and respective test results the type of glue and the pressure and pressing time are very important factors which strongly influence the final product. The results obtained confirmed the initial hypotheses that these boards have potential as a thermal and, eventually, acoustic insulation material, to use as coating or intermediate layer on walls, floors or false ceilings. This type of board has a high mechanical resistance when compared with traditional insulating materials.The integrity of these boards seems to be maintained even in higher humidity environments. However, due to biological susceptibility and sensitivity to water, they would be more adequate for application in dry interior conditions.

Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on carbonate stones

In the context of this dissertation several studies were developed resulting in submission and publication “Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on calcareous stones” to Journal of Cultural Heritage. (http://dx.doi.org/10.101 /j.culher.2014.10.004)

Mechanical vs. electrical hysteresis of carbon nanotube/styrene-butadiene-styrene composites and their influence in the electromechanical response

The interesting properties of thermoplastics elastomers can be combined with carbon nanotubes (CNT) for the development of large strain piezoresistive composites for sensor applications. Piezoresistive properties of the composites depend on CNT content, with the gauge factor increasing for concentrations around the percolation threshold, mechanical and electrical hysteresis. The SBS copolymer composition (butadiene/styrene ratio) influences the mechanical and electrical hysteresis of composites and, therefore, the piezoresistive response. This work reports on the electrical and mechanical response of CNT/SBS composites with 4%wt nanofiller content, due to the larger electromechanical response. C401 and C540 SBS copolymers with 80% and 60% butadiene content, respectively have been selected. The copolymer with larger amount of soft phase (C401) shows a rubber-like mechanical behavior, with mechanical hysteresis increasing linearly with strain until 100% strain. The copolymer with the larger amount of hard phase (C540) just shows rubber-like behavior for low strains. The piezoresistive sensibility is similar for both composites for low strains, with a GF≈ 5 for 5% strain. The electrical hysteresis shows opposite behavior than the mechanical hysteresis, increasing with strain for both composites, but with higher increase for softer copolymer, C401. The GF increases with increasing strain, but this increase is larger for composites with lower amounts of soft phase due to the distinct initial modulus and deformation of the soft and hard phases of the copolymer. The soft phase shows larger strain under a given stress than the harder phase and the conductive pathway rearrangements in the composites are different for both phases, the harder copolymer (C540) showing higher piezoresistive sensibility, GF≈ 18, for 20% strain.

Structural, mechanical and piezoelectric properties of polycrystalline AlN films sputtered on titanium bottom electrodes

Polycrystalline AlN coatings deposited on Ti-electrodes films were sputtered by using nitrogen both as reactive gas and sputtering gas, in order to obtain high purity coatings with appropriate properties to be further integrated into wear resistance coatings as a piezoelectric monitoring wear sensor. The chemical composition, the structure and the morphology of the films were investigated by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy and atomic force microscopy techniques. These measurements show the formation of highly (101), (102) and (103) oriented AlN films with good piezoelectric and mechanical properties suitable for applications in electronic devices. Through the use of lower nitrogen flow a densification of the AlN coating occurs in the microstructure, with an improvement of the crystallinity along with the increase of the hardness. Thermal stability of aluminum nitride coatings at high temperature was also examined. It was found an improvement of the piezoelectric properties of the highly (10x) oriented AlN films which became c-axis (002) oriented after annealing. The mechanical behavior after heat treatment shows an important enhancement of the surface hardness and Young’s modulus, which decrease rapidly with the increase of the indentation depth until approach constant values close to the substrate properties after annealing. Thus, thermal annealing energy promotes not only the rearrangement of Al–N network, but also the occurrence of a nitriding process of unsaturated Al atoms which cause a surface hardening of the film.

Mechanical, fatigue and wear properties of sintered Carbon Nanotube-based functionally graded materials

Tese de Doutoramento Engenharia Mecânica

The Expenditure Impacts of Individual Higher Education Institutions (HEIs) and their Students on the Northern Irish Economy: Homogeneity or Heterogeneity?

This paper replicates the analysis of Scottish HEIs in Hermannsson et al (2010a) for the case of Northern Ireland in order to provide a self-contained analysis that is readily accessible by those whose primary concern is with the regional impacts of Northern-Irish HEIs. When we treat each of the four Higher Education Institutions (HEIs) that existed in Northern Ireland in 2006 as separate sectors in conventional input-output analysis, their expenditure impacts per unit of final demand appear rather homogenous, with the apparent heterogeneity of their overall impacts being primarily driven by scale. However, a disaggregation of their income by source reveals considerable variation in their dependence upon funding from the devolved Assembly and their ability to draw in income/funding from external sources. Acknowledging the binding budget constraint of the Northern Ireland Assembly and deriving balanced expenditure multipliers reveals large differences in the netexpenditure impact of HEIs upon the Northern Irish economy, with the source of variation being the origin of income. Applying a novel treatment of student expenditure impacts, identifying the amount of exogenous spending per student, modifies the heterogeneity of the overall expenditure impacts. On balance this suggests that the impacts of impending budget cut-backs will be quite different by institution depending on their sensitivity to public funding. However, predicting the outcome of budget cutbacks at the margin is problematic for reasons that we identify.

The longitudinal association between social functioning and theory of mind in first episode psychosis

Introduction. There is some cross-sectional evidence that theory of mind ability is associated with social functioning in those with psychosis but the direction of this relationship is unknown. This study investigates the longitudinal association between both theory of mind and psychotic symptoms and social functioning outcome in first-episode psychosis. Methods. Fifty-four people with first-episode psychosis were followed up at 6 and 12 months. Random effects regression models were used to estimate the stability of theory of mind over time and the association between baseline theory of mind and psychotic symptoms and social functioning outcome. Results. Neither baseline theory of mind ability (regression coefficients: Hinting test 1.07 95% CI 0.74, 2.88; Visual Cartoon test 2.91 95% CI 7.32, 1.51) nor baseline symptoms (regression coefficients: positive symptoms 0.04 95% CI 1.24, 1.16; selected negative symptoms 0.15 95% CI 2.63, 2.32) were associated with social functioning outcome. There was evidence that theory of mind ability was stable over time, (regression coefficients: Hinting test 5.92 95% CI 6.66, 8.92; Visual Cartoon test score 0.13 95% CI 0.17, 0.44). Conclusions. Neither baseline theory of mind ability nor psychotic symptoms are associated with social functioning outcome. Further longitudinal work is needed to understand the origin of social functioning deficits in psychosis.

The trouble with suicide. Mental health, suicide and the Northern Ireland conflict: a review of the evidence.

Section 1: The Social Basis of Mental Well-being Section 2: Mental Illness, Conflicts and Disasters Section 3: Northern Ireland, Conflict and Mental Health Section 4: Mental Health and Suicide Section 5: Suicide: Patterns and Trends Section 6: The Social Characteristics of Suicides in Northern Ireland Section 7: Explaining Suicide Trends Section 8: Suicide and Transition to Peace Section 9: ConclusionThis resource was contributed by The National Documentation Centre on Drug Use.

Census 2011 Ireland and Northern Ireland: Key findings

Following publication of the individual Census 2011 results from the Republic of Ireland (ROI) and Northern Ireland (NI), the Central Statistics Office and Northern Ireland Statistics and Research Agency have teamed up to produce a comparative report, Census 2011 Ireland and Northern Ireland. The report presents comparative analysis in a��range of areas including demographics, households, place of birth, religion, health, housing and��travel. Some key findings relevant to ageing and older people across the island of Ireland are summarised in this document:��Census 2011 Ireland and Northern Ireland: Key findings

Prevalence and genotyping of hepatitis C virus in blood donors in the state of Pará, Northern Brazil

Given the scarcity of epidemiological information on hepatitis C virus (HCV) infection in Northern Brazil, we determined the prevalence and genotypic frequency in blood donors in the state of Pará (PA). Blood samples from all of the blood donors at the Fundação HEMOPA (blood bank of PA) from 2004-2006 were screened for the presence of antibodies to anti-HCV and samples seroreactive to anti-HCV were further tested for HCV RNA using real-time PCR. In total, 116 HCV-RNA samples were genotyped, based on maximum likelihood phylogenetic analyses, using BioEdit, Modelgenerator, PHYML and FigTree software. The population consisted of 242,726 volunteers who donated blood from 2004-2006; the most common subgroup was males between the ages of 18-29 years old (37.30%). Within the whole group, 1,112 blood donors (0.46%) had indeterminate or positive serology; among these, 28.78% were males whose ages ranged from 18-29 years. A diagnosis of chronic HCV infection was confirmed for 304 donors (60.20% males; 66.45% were 30-49 years old), resulting in a prevalence of HCV RNA in 0.13% of the samples (304 of 242,726). HCV genotyping revealed a high frequency of genotype 1 (108/116) followed by genotype 3 (8/116). This study found HCV infection to be relatively infrequent in PA; genotype 1 was most commonly isolated. This information can help guide prevention and control policies aimed at efficient diagnosis and control measures.

Exposure of free-ranging wild carnivores, horses and domestic dogs to Leptospira spp in the northern Pantanal, Brazil

Leptospirosis is a zoonotic disease affecting most mammals and is distributed throughout the world. Several species of domestic and wild animals may act as reservoirs for this disease. The purpose of this study was to assess the exposure of free-ranging wild carnivores, horses and domestic dogs on a private reserve located in the northern Pantanal (Brazil) and the surrounding areas to Leptospira spp from 2002-2006, 75 free-ranging wild carnivores were captured in the Pantanal and serum samples were collected. In addition, samples from 103 domestic dogs and 23 horses in the region were collected. Serum samples were tested for the presence of Leptospira antibodies using the microscopic agglutination test. Thirty-two wild carnivores (42.7%) were considered positive with titres > 100, and 18 domestic dogs (17.5%) and 20 horses (74.1%) were also found to be positive. Our study showed that horses, dogs and several species of free-ranging wild carnivores have been exposed to Leptospira spp in the Pantanal, suggesting that the peculiar characteristics of this biome, such as high temperatures and an extended period of flooding, may favour bacterial persistence and transmission. In this region, wild carnivores and horses seem to be important hosts for the epidemiology of Leptospira species.

Association between HIV status and HIV knowledge in the population attending Non-Governmental Organizations to perform the rapid HIV test in Catalonia

Human Immunodeficiency Virus continues to be a pandemic. Spain is one of the European countries with the highest incidence of HIV. Within Catalonia, Spain many projects have been implemented with the intention of improving HIV knowledge and lowering the incidence. HIV knowledge is also known to have a positive effect on lowering stigma and discrimination of the people living with HIV. However, few studies study the distribution of HIV knowledge and its association to HIV status, age, sex, geographical zone of origin and level of education within the same study. Objectives: To identify if HIV knowledge is associated with HIV status, age, sex, geographical zone of origin and level of education. Method: Quantitative, cross-sectional, centre-based study comprising of people receiving an HIV test in Catalonia, Spain. Data will be collected from the 11 HIV Non-Governmental Organisations in Catalonia, Spain. The Brief HIV Knowledge Scale will be used to assess HIV knowledge; information from the HIV test session will be used to assess HIV status, age, sex, geographic zone of origin and level of education. The association between HIV knowledge and the afore mentioned variables will then be calculated.