Tensile creep of a structural epoxy adhesive: experimental and analytical characterization

Epoxy adhesives are nowadays being extensively used in Civil Engineering applications, mostly in the scope of the rehabilitation of reinforced concrete (RC) structures. In this context, epoxy adhesives are used to provide adequate stress transference from fibre reinforced polymers (FRP) to the surrounding concrete substrate. Most recently, the possibility of using prestressed FRPs bonded with these epoxy adhesives is also being explored in order to maximize the potentialities of this strengthening approach. In this context, the understanding of the long term behaviour of the involved materials becomes essential. Even when non-prestressed FRPs are used a certain amount of stress is permanently applied on the adhesive interface during the serviceability conditions of the strengthened structure, and the creep of the adhesive may cause a continuous variation in the deformational response of the element. In this context, this paper presents a study aiming to experimentally characterize the tensile creep behaviour of an epoxy-based adhesive currently used in the strengthening of concrete structures with carbon FRP (CFRP) systems. To analytically describe the tensile creep behaviour, the modified Burgers model was fitted to the experimental creep curves, and the obtained results revealed that this model is capable of predicting with very good accuracy the long term behaviour of this material up to a sustained stress level of 60% of the adhesive’s tensile strength.

High strain rate constitutive modeling forhistorical structures subjected to blast loading

Doctoral Thesis Civil Engineering

A high order model for piezoelectric rods: an asymptotic approach

Preprint submitted to International Journal of Solids and Structures. ISSN 0020-7683

Implementation and validation of a strain rate dependent anisotropic continuum model for masonry

A newly developed strain rate dependent anisotropic continuum model is proposed for impact and blast applications in masonry. The present model adopted the usual approach of considering different yield criteria in tension and compression. The analysis of unreinforced block work masonry walls subjected to impact is carried out to validate the capability of the model. Comparison of the numerical predictions and test data revealed good agreement. Next, a parametric study is conducted to evaluate the influence of the tensile strengths along the three orthogonal directions and of the wall thickness on the global behavior of masonry walls.

Dynamic interface model for masonry walls subjected to high strain rate out-of-plane loads

The present study proposes a dynamic constitutive material interface model that includes non-associated flow rule and high strain rate effects, implemented in the finite element code ABAQUS as a user subroutine. First, the model capability is validated with numerical simulations of unreinforced block work masonry walls subjected to low velocity impact. The results obtained are compared with field test data and good agreement is found. Subsequently, a comprehensive parametric analysis is accomplished with different joint tensile strengths and cohesion, and wall thickness to evaluate the effect of the parameter variations on the impact response of masonry walls.

A bio-inspired computational model for motion detection

Tese de Doutoramento (Programa Doutoral em Engenharia Biomédica)

An integrated model for simulation of construction phasing of arch concrete dams

Dissertação de mestrado integrado em Civil Engineering

HOXA9 as a key regulator in glioma initiation, aggressiveness and response to therapy

Tese de Doutoramento em Ciências da Saúde

Mecanismos de Fotopercepción No-Visual y Control Circadiano en la Retina Interna de Vertebrados en Condiciones Fisiológicas y en un Modelo Animal de Ceguera. Mechanisms of Non-visual Perception and Circadian Control in the Vertebrate Inner Retina under Physiological Conditions and in Animal Model of Blindness.

La retina juega un rol esencial en el funcionamiento del sistema circadiano de los vertebrados al ser la encargada de sensar las condiciones de iluminación ambiental que ajustan el reloj interno con el fotoperíodo exterior a través de un circuito no-visual. Este circuito es independiente de la vía de formación de imágenes e involucra a las células ganglionares retinianas (CGRs) que proyectan a varias estructuras no-visuales del cerebro; esta vía es la encargada de regular el reflejo pupilar, la sincronización de los ritmos diarios de actividad, el sueño y la supresión de melatonina pineal. La retina contiene además un reloj autónomo que genera ritmos diarios autosostenidos en distintas funciones bioquímicas y fisiológicas, que le confiere la capacidad de predecir el tiempo y anticiparse en su fisiología a los cambios lumínicos a lo largo del ciclo día-noche. Este laboratorio ha demostrado por 1ra vez que las CGRs de pollo poseen osciladores endógenos que generan variaciones diarias en la biosíntesis de fosfolípidos (Guido et al, J Neurochem. 2001; Garbarino et al., J Neurosci Res. 2004a) y de la hormona melatonina con niveles máximos durante el día (Garbarino et al., J Biol Chem 2004b). Aún más, cultivos primarios de CGRs responden a la luz a través de una cascada bioquímica de fototransducción similar a la de invertebrados y que involucra la activación de la enzima fosfolipasa C (PLC) (Contin et al., FASEB J 2006). Estos cultivos fueron obtenidos a estadios embrionarios muy tempranos en dónde solo las CGRs son postmitóticas y mayoritariamente maduras. A estos estadios, los cultivos expresan marcadores de especificación de células ganglionares (pax6, brn3), la proteina Gq y los fotopigmentos melanopsina y criptocromos con gran homología con marcadores descriptos para fotorreceptores rabdoméricos de invertebrados (Contin et al, 2006). Recientemente comenzamos a investigar la percepción de luz en pollos GUCY1*, un modelo de ceguera, en animales que carecen de células fotorreceptoras-conos y bastones-funcionales. Resultados preliminares indicarían que la retina interna, y potencialmente las CGRs de estos animales conservarían la capacidad de responder a la luz regulando el reflejo pupilar y sincronizando los ritmos diarios de alimentación. La convergencia de osciladores y fotopigmentos en la población de CGRs podría contribuir al control temporal de la fisiología del organismo y regulación de funciones no-visuales. Son objetivos de este proyecto: a) Investigar el rol de las CGRs en el sistema circadiano estudiando: i- su habilidad para sintetizar melatonina y, su regulación por luz y dopamina; ii- su capacidad fotorreceptora intrínseca, investigando la presencia de fotopigmentos y componentes de la cascada de fototransducción fundamentalmente la vía de los fosfoinosítidos y la activación de PLC, mediante ensayos moleculares, bioquímicos y farmacológicos; b) Extender estos estudios a cultivos primarios de CGRs inmunopurificadas midiendo la respuesta a la luz sobre la síntesis de melatonina, y los niveles de los mensajeros 2rios Ca2+ y AMP cíclico, la inducción de genes tempranos y la regulación de la actividad NAT, enzima clave en la síntesis de melatonina; y c) Investigar la percepción de luz en pollos GUCY1*(ciegos), sobre distintas funciones no-visuales tales como el reflejo pupilar, la sincronización de los ritmos diarios de alimentación, la síntesis de melatonina y la expresión génica en animales expuestos a estimulación lumínica de distintas intensidades y longitudes de onda. Estos estudios permitirán construir el espectro de acción de la respuesta a la luz en los pollos ciegos a fin de identificar el/los fotopigmentos intervinientes en este fenómeno. Este proyecto profundizará el conocimiento sobre la capacidad fotorreceptora-no visual de la retina interna y particularmente de las CGRs, de la naturaleza de la cascada bioquímica que opera en las mismas y de los mecanismos de regeneración del cromóforo utilizado.

The structural approach of a natrex model on equilibrium exchange rates

Following a general macroeconomic approach, this paper sets a closed micro-founded structural model to determine the long run real exchange rate of a developed economy. In particular, the analysis follows the structure of a Natrex model. The main contribution of this research paper is the development of a solid theoretical framework that analyse in depth the basis of the real exchange rate and the details of the equilibrium dynamics after any shock influencing the steady state. In our case, the intertemporal factors derived from the stock-flow relationship will be particularly determinant. The main results of the paper can be summarised as follows. In first place, a complete well-integrated structural model for long-run real exchange rate determination is developed from first principles. Moreover, within the concrete dynamics of the model, it is found that some convergence restrictions will be necessary. On one hand, for the medium run convergence the sensitivity of the trade balance to changes in real exchange rate should be higher that the correspondent one to the investment decisions. On the other hand, and regarding long-run convergence, it is also necessary both that there exists a negative relationship between investment and capital stock accumulation and that the global saving of the economy depends positively on net foreign debt accumulation. In addition, there are also interesting conclusions about the effects that certain shocks over the exogenous variables of the model have on real exchange rates.

A Multisectorial model of prices: the SAM approach

Social Accounting Matrices (SAM) are normally used to analyse the income generation process. They are also useful, however, for analysing the cost transmission and price formation mechanisms. For price contributions, Roland-Holst and Sancho (1995) used the SAM structure to analyse the price and cost linkages through a representation of the interdependence between activities, households and factors. This paper is a further analysis of the cost transmission mechanisms, in which I add the capital account to the endogenous components of the Roland-Holst and Sancho approach. By doing this I reflect the responses of prices to the exogenous shocks in savings and investment. I also present an additive decomposition of the global price effects into categories of interdependence that isolates the impact on price levels of shocks in the capital account. I use a 1994 Social Accounting Matrix to make an empirical application of the Catalan economy. Keywords: social accounting matrix, cost linkages, price transmission, capital account. JEL Classification: C63, C69, D59.

Non-hyperbolic boundary equilibrium bifurcations in planar Filippov systems: a case study approach

Boundary equilibrium bifurcations in piecewise smooth discontinuous systems are characterized by the collision of an equilibrium point with the discontinuity surface. Generically, these bifurcations are of codimension one, but there are scenarios where the phenomenon can be of higher codimension. Here, the possible collision of a non-hyperbolic equilibrium with the boundary in a two-parameter framework and the nonlinear phenomena associated with such collision are considered. By dealing with planar discontinuous (Filippov) systems, some of such phenomena are pointed out through specific representative cases. A methodology for obtaining the corresponding bi-parametric bifurcation sets is developed.

A musculoskeletal shoulder model based on pseudo-inverse and null-space optimization.

The goal of the present work was assess the feasibility of using a pseudo-inverse and null-space optimization approach in the modeling of the shoulder biomechanics. The method was applied to a simplified musculoskeletal shoulder model. The mechanical system consisted in the arm, and the external forces were the arm weight, 6 scapulo-humeral muscles and the reaction at the glenohumeral joint, which was considered as a spherical joint. The muscle wrapping was considered around the humeral head assumed spherical. The dynamical equations were solved in a Lagrangian approach. The mathematical redundancy of the mechanical system was solved in two steps: a pseudo-inverse optimization to minimize the square of the muscle stress and a null-space optimization to restrict the muscle force to physiological limits. Several movements were simulated. The mathematical and numerical aspects of the constrained redundancy problem were efficiently solved by the proposed method. The prediction of muscle moment arms was consistent with cadaveric measurements and the joint reaction force was consistent with in vivo measurements. This preliminary work demonstrated that the developed algorithm has a great potential for more complex musculoskeletal modeling of the shoulder joint. In particular it could be further applied to a non-spherical joint model, allowing for the natural translation of the humeral head in the glenoid fossa.

The Importance of Graduates for the Scottish Economy: A “Micro-to-Macro” Approach

There have been numerous attempts to assess the overall impact of Higher Education Institutions on regional economies in the UK and elsewhere. There are two disparate approaches focussing on: demand-side effects of HEIs, exerted through universities’ expenditures within the local economy; HEIs’ contribution to the “knowledge economy”. However, neither approach seeks to measure the impact on regional economies that HEIs exert through the enhanced productivity of their graduates. We address this lacuna and explore the system-wide impact of the graduates on the regional economy. An extensive and sophisticated literature suggests that graduates enjoy a significant wage premium, often interpreted as reflecting their greater productivity relative to non-graduates. If this is so there is a clear and direct supply-side impact of HEI activities on regional economies through the employment of their graduates. However, there is some dispute over the extent to which the graduate wage premium reflects innate abilities rather than the impact of higher education per se. We use an HEI-disaggregated computable general equilibrium model of Scotland to estimate the impact of the growing proportion of graduates in the Scottish labour force that is implied by the current participation rate and demographic change, taking the graduate wage premium in Scotland as an indicator of productivity enhancement. We conduct a range of sensitivity analyses to assess the robustness of our results. While the detailed results do, of course, vary with alternative assumptions about future graduate retention rates and the size of the graduate wage premium, for example, they do suggest that the long-term supply-side impacts of HEIs provide a significant boost to regional GDP. Furthermore, the results suggest that the supply-side impacts of HEIs are likely to be more important than the expenditure impacts that are the focus of most “impact” studies.