Performance of a New One-step Multi-mode Adhesive on Etched vs Non-etched Enamel on Bond Strength and Interfacial Morphology

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Model updating of the non-linear vibrating structures through Volterra series and proper orthogonal decomposition

Classical procedures for model updating in non-linear mechanical systems based on vibration data can fail because the common linear metrics are not sensitive for non-linear behavior caused by gaps, backlash, bolts, joints, materials, etc. Several strategies were proposed in the literature in order to allow a correct representative model of non-linear structures. The present paper evaluates the performance of two approaches based on different objective functions. The first one is a time domain methodology based on the proper orthogonal decomposition constructed from the output time histories. The second approach uses objective functions with multiples convolutions described by the first and second order discrete-time Volterra kernels. In order to discuss the results, a benchmark of a clamped-clamped beam with an pre-applied static load is simulated and updated using proper orthogonal decomposition and Volterra Series. The comparisons and discussions of the results show the practical applicability and drawbacks of both approaches.

A BOUNDARY ELEMENT FORMULATION FOR MASONRY WALLS: NON-LINEAR ANALYSIS

In this work, a non-linear Boundary Element Method (BEM) formulation with damage model is extended for numerical simulation of structural masonry walls in 2D stress analysis. The formulation is reoriented to analyse structural masonry, the component materials of which, clay bricks and mortar, are considered as damaged materials. Also considered are the internal variables and cell discretization of the domain. A damage model is used to represent the material behaviour and the domain discretization is also proposed and discussed. The paper presents the numerical parameters of the damage model for the material properties of the masonry components, clay bricks and mortar. Some examples are shown to validate the formulation.

Peat humic substances enriched with nutrients for agricultural applications: competion between nutrients and non-essential metals present in tropical soils

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Antifungal activity of extracts and isolated compounds from Buchenavia tomentosa on Candida albicans and non-albicans

Aim: This study aimed to evaluate the antifungal activity of Buchenavia tomentosa extract and bioactive compounds on six Candida species. Materials & methods: The antimicrobial activity of extract was evaluated using standard strains and clinical isolates. Cytotoxicity was tested in order to evaluate cell damage caused by the extract. Extract was chemically characterized and the antifungal activity of its compounds was evaluated. Results: Extract showed antifungal activity on Candida species. Candida non-albicans were more susceptible than Candida albicans. Low cytotoxicity for extract was observed. The isolated compounds presented antifungal activity at least against one Candida spp. and all compounds presented antifungal effect on Candida glabrata. Conclusion: Extracts from Buchenavia tomentosa showed promising antifungal activity on Candida species with low cytotoxicity. Gallic acid, corilagin and ellagic acid showed promising inhibitory activity on Candida glabrata.

Non-conventional cement-based composites reinforced with vegetable fibers: a review of strategies to improve durability

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Perception of brazilian citizens about Darwinism and the (Non) Influence of God in the evolutionary process

The current context is unique in relation to the teaching of evolution in Brazil and the population's perception of evolution. On the one hand, it is said often about Darwinism in various media, especially due to the relatively recent commemoration of the two hundred years of the birth of Charles Darwin and one hundred and fifty years of the launch of the book The Origin of Species. On the other hand, it is clear, in recent years, a timid movement, more worryingly, in favor of equitable approach of creationist and evolutionist theories in the classroom. This article is a part of a research whose goal is to raise the design that Brazilian respondents have about the Darwinian view (which disregards the divine influence in the evolution of the species). The instrument used for data collection is a questionnaire, type Likert scale, which consists of a series of statements in which respondents must express their degree of agreement or disagreement with each statement. In this study, we present the results of the statement. "The thought of Darwin, which does not consider God as a participant in the process of evolution, is...". Analysis correlated with data on religion and education of the respondents are also held. The results point to a tendency of respondents not to accept the Darwinian view that disregards God's interference in the evolutionary process. The data also show that respondents' choices are influenced by religion and education. The frequency of responses that tend to accept the Darwinian view (which disregards the divine participation in the evolution of the species) is higher among respondents with higher levels of education. Adherents to religions "evangelical" tend to deny this view more often than followers of other religions. Given the potential risks of inserting creationist approaches in school education, it is necessary a discussion of the possible impacts of this rejection of Darwin's thinking (which does not consider God as a participant in the evolutionary process), indicated here, in the teaching of evolution. This work was supported by FAPEMIG.

Clinical evaluation of a composite resin and a resin-modified glass-ionomer cement in non -carious cervical lesions: one year result

Objectives: The objective of this study was to evaluate the clinical performance of 124 non-carious cervical lesion restorations at 12 months. Materials And Methods: Three study groups were formed according to the material and technique used. All teeth received 37% phosphoric acid etching in enamel and dentin. The teeth of Group I received the conventional adhesive system Scotch Bond Multi Purpose, followed by resin composite Filtek Z350; teeth of Group II were restored with resin-modified glass-ionomer cement Fuji II LC; teeth of Group III were restored with the same resin-modified glass-ionomer cement however, before it was inserted, 2 coats of primer of the Scotch Bond Multi Purpose adhesive system were applied to dentinal tissue. The teeth were evaluated by 2 examiners with regard to the factors of retention, marginal adaptation, marginal discoloration, color alteration, presence of marginal caries lesion, anatomic shape, and sensitivity. Results: Application of the Kruskal-Wallis test showed no statistically significant difference for anatomic shape, marginal discoloration, color alteration, caries lesion, marginal adaptation, and sensitivity among the three study groups, but the variable retention presented statistically significant difference at 12 months, with Group III presenting a behavior superior to that of Group II but similar to that of Group I. Conclusion: The analyzed restorations of non-carious cervical lesions presented a good clinical performance at 12 months.

Acute and subchronic antihyperglycemic activities of bowdichia virgilioides roots in non diabetic and diabetic rats

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Compressed Air, Wooden Clappers, and Other Non-Traditional Methods for Dispersing European Starlings from an Urban Roost

During autumn 2003, several thousand European starlings (Sturnus vulgaris) began roosting on exposed I-beams in a newly constructed, decorative glass canopy that covered the passenger pick-up area at the terminal building for Cleveland Hopkins International Airport, Ohio. The use of lethal control or conventional dispersal techniques, such as pyrotechnics and fire hoses, were not feasible in the airport terminal area. The design and aesthetics of the structure precluded the use of netting and other exclusion materials. In January 2004, an attempt was made to disperse the birds using recorded predator and distress calls broadcast from speakers installed in the structure. This technique failed to disperse the birds. In February 2004, we developed a technique using compressed air to physically and audibly harass the birds. We used a trailer-mounted commercial air compressor producing 185 cubic feet per minute of air at 100 pounds per square inch pressure and a 20-foot long, 1-inch diameter PVC pipe attached to the outlet hose. One person slowly (< 5 mph) drove a pick-up truck through the airport terminal at dusk while the second person sat on a bench in the truck bed and directed the compressed air from the pipe into the canopy to harass starlings attempting to enter the roost site. After 5 consecutive nights of compressed-air harassment, virtually no starlings attempted to roost in the canopy. Once familiar with the physical effects of the compressed air, the birds dispersed at the sound of the air. Only occasional harassment at dusk was needed through the remainder of the winter to keep the canopy free of starlings. Similar harassment with the compressor was conducted successfully in autumn 2004 with the addition of a modified leaf blower, wooden clappers, and laser. In conclusion, we found compressed air to be a safe, unobtrusive, and effective method for dispersing starlings from an urban roost site. This technique would likely be applicable for other urban-roosting species such as crows, house sparrows, and blackbirds.

Saccharification of Brazilian sisal pulp: evaluating the impact of mercerization on non-hydrolyzed pulp and hydrolysis products

Cultivation of sisal, a plant with a short growth cycle, is highly productive in Brazil. This work is part of extensive research in which sisal is valued. In these studies, sisal fibers are used in the preparation of bio-based composites and in the derivatization of the pulp, including posterior preparation of films. This study aimed to examine the use of sisal pulp in the production of bioethanol, which can potentially be a high efficiency process because of the cellulose content of this fiber. A previous paper addressed the hydrolysis of sisal pulp using sulfuric acid as a catalyst. In the present study, the influence of the mercerization process on the acid hydrolysis of sisal pulp was evaluated. Mercerization was achieved in a 20% wt NaOH solution, and the cellulosic pulp was suspended and vigorously mixed for 1, 2 and 3 h, at 50 A degrees C. The previously characterized mercerized pulps were hydrolyzed (100 A degrees C, 30% H2SO4, v/v), and the results are compared with those obtained for unmercerized pulp (described in a companion paper). The starting sample was characterized by viscometry, alpha-cellulose content, crystallinity index and scanning electron microscopy. During the reactions, aliquots were withdrawn, and the liquor was analyzed by HPLC. The residual pulps (non-hydrolyzed) were also characterized by the techniques described for the initial sample. The results revealed that pretreatment decreases the polyoses content as well as causes a decrease of up to 23% in the crystallinity and up to 21% in the average molar mass of cellulose after 3 h of mercerization. The mercerization process proved to be very important to achieve the final target. Under the same reaction conditions (30% and 100 A degrees C, 6 h), the hydrolysis of mercerized pulp generated yields of up to 50% more glucose. The results of this paper will be compared with the results of subsequent studies obtained using other acids, and enzymes, as catalysts.

Percolated non-Newtonian flow for silicone obtained from exfoliated bioinorganic layered double hydroxide intercalated with amino acid

A simple and scalable procedure was used to obtain thin, stable, homogeneous, and easy-to-handle films composed of silicone derived from dimethicones containing dispersed hydrotalcite-type materials previously organo-modified with amino acids. The absence of the typical X-ray pattern of the bioinorganic LDH filler suggested an exfoliation process that was further indirectly evidenced by a drastic change in the rheological behavior, which turned from a quasi-Newtonian behavior for the silicone free of LDH filler to an extensive developed gel-like structure for the nanocomposite derivatives. Visualized by the shear-thinning exponent of the complex viscosity in the low-frequency range, the percolation threshold was evident for filler loading as low as <5 w/W%, suggesting the presence of a largely developed interface between the filler and the polymer. The increase of more than one order of magnitude in viscosity was explained by the rather strong attrition phenomenon between the tethered amino acid anions and the silicone chains. UVB radiation absorption profiles make such bioinorganic polymer nanocomposites potentially applicable in skin protection. Thermo-gravimetric analysis revealed significant improvement in the thermal stability, especially in the final step of the polymer combustion, thus underlining the role of the hybrid material as a thermal retardant agent. (C) 2011 Elsevier B.V. All rights reserved.

Effective Properties Evaluation for Smart Composite Materials

The purpose of this article is to present a method which consists in the development of unit cell numerical models for smart composite materials with piezoelectric fibers made of PZT embedded in a non-piezoelectric matrix (epoxy resin). This method evaluates a globally homogeneous medium equivalent to the original composite, using a representative volume element (RVE). The suitable boundary conditions allow the simulation of all modes of the overall deformation arising from any arbitrary combination of mechanical and electrical loading. In the first instance, the unit cell is applied to predict the effective material coefficients of the transversely isotropic piezoelectric composite with circular cross section fibers. The numerical results are compared to other methods reported in the literature and also to results previously published, in order to evaluate the method proposal. In the second step, the method is applied to calculate the equivalent properties for smart composite materials with square cross section fibers. Results of comparison between different combinations of circular and square fiber geometries, observing the influence of the boundary conditions and arrangements are presented.

Leukocytes from wheezing infants release lower amounts of IL-12 and IFN-gamma compared to non-wheezing infants

Objective This study investigated environmental endotoxin exposure during early life, sensitization to aeroallergens, the production of cytokines by LPS-stimulated leukocytes, and the development of a wheezing phenotype in a prospective cohort of infants with high risk of developing allergic diseases. Materials and Methods Eighty-four infants were followed from birth until 30 months of age. We assessed endotoxin concentration in house dust of their homes during the first 6 months of life. At age 30 months they were clinically evaluated to determine the development of wheezing and other clinical events, were skin prick tested, and had blood samples collected for the evaluation of cytokine release by LPS-stimulated peripheral blood mononuclear cells (PBMC). Results The level of endotoxin exposure during early life was not associated with development of a wheezing phenotype. On the other hand a higher incidence of respiratory infections occurred among recurrent wheezing (RW) infants. PBMC from RW children exposed to higher levels of environmental endotoxin (above 50?EU/mg) released less Interleukin (IL)-12p70 and IFN-? compared to the non-RW group. TNF-a, IL-10, IL-4, IL-5, and IL17 production by LPS-stimulated PBMC from RW and non-RW children was equivalent in both groups of environmental endotoxin exposure. Conclusion In this prospective cohort of infants with high risk of developing allergic diseases we observed that RW and non-RW children were exposed to similar levels of endotoxin early in life. LPS-stimulated PBMC from RW infants exposed to higher levels of endotoxin released significantly less IL-12 and IFN-? compared to non-RW infants. Pediatr Pulmonol. 2012. 47:10541060. (C) 2012 Wiley Periodicals, Inc.

Further results in J and CTOD estimation procedures for SE(T) fracture specimens - Part I: Homogeneous materials

This study provides further developments of the evaluation procedure for J and CTOD in SE(T) fracture specimens based on plastic eta-factors and load separation analysis. Non-linear finite element analyses for plane-strain and 3-D models provide the relationship between plastic work and crack driving forces which define the eta-values. Further analyses based on the load separation method define alternative eta-values for the analyzed specimen configurations. Overall, the present results provide improved estimation equations for J and CTOD as a function of loading condition (pin load vs. clamp ends), crack geometry and strain hardening properties. (C) 2011 Elsevier Ltd. All rights reserved.