Low variation in ribosomal DNA and internal transcribed spacers of the symbiotic fungi of leaf-cutting ants (Attini: Formicidae)

Leaf-cutting ants of the genera Atta and Acromyrmex (tribe Attini) are symbiotic with basidiomycete fungi of the genus Leucoagaricus (tribe Leucocoprineae), which they cultivate on vegetable matter inside their nests. We determined the variation of the 28S, 18S, and 5.8S ribosomal DNA (rDNA) gene loci and the rapidly evolving internal transcribed spacers 1 and 2 (ITS1 and ITS2) of 15 sympatric and allopatric fungi associated with colonies of 11 species of leafcutter ants living up to 2,600 km apart in Brazil. We found that the fungal rDNA and ITS sequences from different species of ants were identical (or nearly identical) to each other, whereas 10 GenBank Leucoagaricus species showed higher ITS variation. Our findings suggest that Atta and Acromyrmex leafcutters living in geographic sites that are very distant from each other cultivate a single fungal species made up of closely related lineages of Leucoagaricus gongylophorus. We discuss the strikingly high similarity in the ITS1 and ITS2 regions of the Atta and Acromyrmex symbiotic L. gongylophorus studied by us, in contrast to the lower similarity displayed by their non-symbiotic counterparts. We suggest that the similarity of our L. gongylophorus isolates is an indication of the recent association of the fungus with these ants, and propose that both the intense lateral transmission of fungal material within leafcutter nests and the selection of more adapted fungal strains are involved in the homogenization of the symbiotic fungal stock.

Design and Material Selection of High-Speed Rotating Electrical Machines

The increasing emphasis on energy efficiency is starting to yield results in the reduction in greenhouse gas emissions; however, the effort is still far from sufficient. Therefore, new technical solutions that will enhance the efficiency of power generation systems are required to maintain the sustainable growth rate, without spoiling the environment. A reduction in greenhouse gas emissions is only possible with new low-carbon technologies, which enable high efficiencies. The role of the rotating electrical machine development is significant in the reduction of global emissions. A high proportion of the produced and consumed electrical energy is related to electrical machines. One of the technical solutions that enables high system efficiency on both the energy production and consumption sides is high-speed electrical machines. This type of electrical machines has a high system overall efficiency, a small footprint, and a high power density compared with conventional machines. Therefore, high-speed electrical machines are favoured by the manufacturers producing, for example, microturbines, compressors, gas compression applications, and air blowers. High-speed machine technology is challenging from the design point of view, and a lot of research is in progress both in academia and industry regarding the solution development. The solid technical basis is of importance in order to make an impact in the industry considering the climate change. This work describes the multidisciplinary design principles and material development in high-speed electrical machines. First, high-speed permanent magnet synchronous machines with six slots, two poles, and tooth-coil windings are discussed in this doctoral dissertation. These machines have unique features, which help in solving rotordynamic problems and reducing the manufacturing costs. Second, the materials for the high-speed machines are discussed in this work. The materials are among the key limiting factors in electrical machines, and to overcome this limit, an in-depth analysis of the material properties and behavior is required. Moreover, high-speed machines are sometimes operating in a harsh environment because they need to be as close as possible to the rotating tool and fully exploit their advantages. This sets extra requirements for the materials applied.

Personality traits and personal values : an investigation into the importance of each in the prediction of behaviour /

Personality traits and personal values are two important domains of individual differences. Traits are enduring and distinguishable patterns of behaviour whereas values are societally taught, stable, individual preferences that guide behaviour in order to reach a specific end state. The purpose of the present study was to investigate the relations between self and peer report within the domains of personality traits and values, to examine the correlations between values and traits, and to explore the amount of incremental validity of traits and values in predicting behaviour. Two hundred and fiftytwo men and women from a university setting completed self and peer reports on three questionnaires. In order to assess personality traits, the HEXACO-PI (Lee & Ashton, 2004) was used to identify levels of 6 major dimensions of personality in participants. To assess values, the Schwartz Value Survey (Schwartz, 1992) was used to identify the importance each participant placed on each of Schwartz's 10 value types. To measure behaviour, a Behavior Scale, created by Bardi and Schwartz (2003), consisting of items designed to measure the frequency of value-expressive behaviour was used. As expected, correlations between self and peer reports for the personality scales were high indicating that personality traits are easily observable to other people. Correlations between self and peer reports for the values and behaviour scales were only moderate, suggesting that some goals, and behaviours expressive of those goals, may not always be observable to others. Consistent with previous research, there were many strong correlations between traits and values. In addition to the similarities with past research, the present study found that the personality factor Honesty-Humility was correlated strongly with values scales (with five correlations exceeding .25). In the prediction of behaviour, it was found that both personahty and values were able to account for significant and similar amounts of variance. Personality outpredicted values for some behaviours, but the opposite was true of other behaviours. Each domain provided incremental validity beyond the other domain. The impUcations for these findings, along with limitations, and possibilities for future research are also discussed.

The nesting biology of Ceratina (Hymenoptera: Apidae) in the Niagara Region : new species, nest site selection and parasitism

One of the most common bee genera in the Niagara Region, the genus Ceratina (Hymenoptera: Apidae) is composed of four species, C. dupla, C. calcarata, the very rare C. strenua, and a previously unknown species provisionally named C. near dupla. The primary goal of this thesis was to investigate how these closely related species coexist with one another in the Niagara ~ee community. The first necessary step was to describe and compare the nesting biologies and life histories of the three most common species, C. dupla, C. calcarata and the new C. near dupla, which was conducted in 2008 via nest collections and pan trapping. Ceratina dupla and C. calcarata were common, each comprising 49% of the population, while C. near dupla was rare, comprising only 2% of the population. Ceratina dupla and C. near dupla both nested more commonly in teasel (Dipsacus sp.) in the sun, occasionally in raspberry (Rubus sp.) in the shade, and never in shady sumac (Rhus sp.), while C. calcarata nested most commonly in raspberry and sumac (shaded) and occasionally in teasel (sunny). Ceratina near dupla differed from both C. dupla and C. calcarata in that it appeared to be partially bivoltine, with some females founding nests very early and then again very late in the season. To examine the interactions and possible competition for nests that may be taking place between C. dupla and C. calcarata, a nest choice experiment was conducted in 2009. This experiment allowed both species to choose among twigs from all three substrates in the sun and in the shade. I then compared the results from 2008 (where bees chose from what was available), to where they nested when given all options (2009 experiment). Both C. dupla and C. calcarata had the same preferences for microhabitat and nest substrate in 2009, that being raspberry and sumac twigs in the sun. As that microhabitat and nest substrate combination is extremely rare in nature, both species must make a choice. In nature Ceratina dupla nests more often in the preferred microhabitat (sun), while C. calcarata nests in the preferred substrate (raspberry). Nesting in the shade also leads to smaller clutch sizes, higher parasitism and lower numbers of live brood in C. calcarata, suggesting that C. dupla may be outcompeting C. calcarata for the sunny nesting sites. The development and host preferences of Ceratina parasitoids were also examined. Ceratina species in Niagara were parasitized by no less than eight species of arthropod. Six of these were wasps from the superfamily Chalcidoidea (Hymenoptera), one was a wasp from the family Ichneumonidae (Hymenoptera) and one was a physogastric mite from the family Pyemotidae (Acari). Parasites shared a wide range of developmental strategies, from ichneumonid larvae that needed to consume multiple Ceratina immatures to complete development, to the species from the Eulophidae (Baryscapus) and Encyrtidae (Coelopencyrtus), in which multiple individuals completed development inside a single Ceratina host. Biological data on parasitoids is scarce in the scientific literature, and this Chapter documents these interactions for future research.

Does the Barro-Gordon Model Explain the Behavior of US Inflation? a Reexamination of the Empirical Evidence

This paper tests the predictions of the Barro-Gordon model using US data on inflation and unemployment. To that end, it constructs a general game-theoretical model with asymmetric preferences that nests the Barro-Gordon model and a version of Cukierman’s model as special cases. Likelihood Ratio tests indicate that the restriction imposed by the Barro-Gordon model is rejected by the data but the one imposed by the version of Cukierman’s model is not. Reduced-form estimates are consistent with the view that the Federal Reserve weights more heavily positive than negative unemployment deviations from the expected natural rate.

Temporary Natural Resource Cartels

We analyze the behavior of a nonrenewable resource cartel that anticipates being forced, at some date in the future, to break-up into an oligopolistic market in which its members will then have to compete as rivals. Under reasonable assumptions about the value function of the individual firms in the oligopolistic equilibrium that follows the break-up, we show that the cartel will then produce more over the same interval of time than it would if there were no threat of dissolution, and that its rate of extraction is a decreasing function of the cartel's life; that there are circumstances under which the cartel will attach a negative marginal value to the resource stocks, in which case the rate of depletion will be increasing over time during the cartel phase; that, for a given date of dissolution, the equilibrium stocks allocated to the post-cartel phase will increase as a function of the total initial stocks, whereas those allocated to the cartel phase will increase at first, but begin decreasing beyond some level of the total initial stocks.

Traits psychopathiques et délinquance autorapportée chez des adolescents suivis en Centre jeunesse

Cette thèse porte sur les traits de personnalité associés aux comportements délinquants. De façon plus spécifique, elle s’intéresse à la contribution des traits de personnalité psychopathiques évalués à l’adolescence pour prédire les conduites délinquantes au début de l’âge adulte, lorsque sont également considérés des indices comportementaux. Elle s’inscrit dans le cadre d’une étude longitudinale plus large destinée à décrire les adolescents des Centres jeunesse du Québec. Aux fins de la thèse, un sous-groupe de jeunes, de sexe masculin, a été sélectionné : ces jeunes présentent un trouble des conduites ou ont manifesté des comportements délinquants au cours de l’adolescence. Cette sélection vise à cerner les adolescents les plus susceptibles de présenter des traits psychopathiques, eu égard à la faible prévalence du trouble dans la population générale. Quarante-huit adolescents ont accepté de participer à l'entrevue utilisant la PCL-SV (Psychopathy Checklist Screening Version). Un premier volet de la thèse valide, au Québec, une version française d’une mesure de la psychopathie adaptée à l'adolescence, la PCL-SV. Les indices de fidélité et de validité sont satisfaisants et comparables à ce qui est rapporté avec d’autres versions de la PCL auprès d’adolescents et d’adultes. Les résultats appuient la pertinence de son utilisation auprès des adolescents. Un second volet du projet porte sur la contribution d’une mesure des traits psychopathiques à l’adolescence à la prédiction des conduites délinquantes au début de l’âge adulte. Les traits psychopathiques, tels qu’évalués à l’aide de la PCL-SV, sont un apport significatif aux indices de comportements délinquants dans la prédiction des conduites délinquantes autorapportées deux ans plus tard. Finalement, un dernier volet explore une approche dimensionnelle dans la conceptualisation de la psychopathie, sous l’angle d’un modèle général de la personnalité : le Modèle à cinq facteurs (MCF). Ce volet porte sur la capacité de ce modèle, alternative au modèle catégoriel, à distinguer des jeunes au plan de la gravité de leur délinquance. Les jeunes présentant une délinquance distinctive ont une plus forte propension à rechercher les sensations fortes que ceux dont la délinquance est générale. Les résultats mettent en lumière l’importance d’une composante d’impulsivité comme élément caractéristique d’un sous-groupe de jeunes présentant une délinquance distinctive. L’étude appuie l’utilisation d’un modèle général de la personnalité pour cerner des traits associés à la psychopathie, permettant ainsi d’identifier un noyau dur de délinquants. L’ensemble du projet permet d’établir la valeur ajoutée d’une mesure des traits psychopathiques à l’adolescence pour la prédiction des conduites délinquantes. Il met en lumière l’importance d’une composante d’impulsivité chez les jeunes impliqués dans une délinquance distinctive. C’est l’une des rares études longitudinales s’intéressant à la délinquance autorapportée et à la psychopathie sous l’angle des facettes du MCF chez des adolescents. Il y a une telle hétérogénéité parmi les jeunes délinquants qu’une mesure valide de la psychopathie à l’adolescence permettra une identification plus fiable des jeunes susceptibles de poursuivre leur trajectoire criminelle à l’âge adulte. Les implications cliniques des résultats et les recommandations pour des recherches futures sont reprises dans la conclusion de l’ouvrage.

Effect of curing temperature , fibre loading and bonding agent on the equilibrium swelling of isora-natural rubbercomposites

Isora fibre-reinforced natural rubber (NR) composites were cured at 80, 100, 120 and 150°C using a low temperature curing accelerator system. Composites were also prepared using a conventional accelerator system and cured at 150°C. The swelling behavior of these composites at varying fibre loadings was studied in toluene and hexane. Results show that the uptake of solvent and volume fraction of rubber due to swelling was lower for the low temperature cured vulcanizates which is an indication of the better fibre/rubber adhesion. The uptake of aromatic solvent was higher than that of aliphatic solvent, for all the composites. As the fibre content increased, the solvent uptake decreased, due to the superior solvent resistance of the fibre and good fibre-rubber interactions. The bonding agent improved the swelling resistance of the composites due to the strong interfacial adhesion. Due to the improved adhesion between the fibre and rubber, the ratio of the change in volume fraction of rubber due to swelling to the volume fraction of rubber in the dry sample (V,) was found to decrease in the presence of bonding agent. At a fixed fibre loading, the alkali treated fibre composite showed a lower percentage swelling than untreated one for both systems showing superior rubber-fibre interactions.

Synthesis and Characterisation of Thermoplastic Ionomers based on Natural Rubber

Chemically modified novel thermo-reversible zinc sulphonated ionomers based on natural rubber (NR), radiation induced styrene grafted natural rubber (RI-SGNR), and chemically induced styrene grafted natural rubber (CI-SGNR) were synthesized using acetyl sulphate/zinc acetate reagent system. Evidence for the attachment of sulphonate groups has been furnished by FTIR spectra. which was supplanted by FTNMR results. Estimation of the zinc sulphonate group was done using spectroscopic techniques such as XRFS and ICPAES. The TGA results prove improvement in the therrno-oxidative stability of the modified natural rubber. Both DSC and DMTA studies show that the incorporation of the ionic groups affect the thermal transition of the base polymer. Retention of the improved physical properties of the novel ionomers even after three repeated cycles of mastication and molding at 120 degree C may be considered as the evidence for the reprocessabiJity of the ionomer. Effect of both particulate (carbon black. silica & zinc stearate) and fibrous fillers (nylon & glass) on the properties of the radiation induced styrene grafted natural rubber ionomer has been evaluated. Incorporation of HAF carbon black results in maximum improvement in physical properties. Silica reinforces the backbone chain and weakens the ionic associations. Zinc stearate plays the dual role of reinforcement and ptasticization. The nylon and glass filled lonorner compounds show good improvement in the physical properties in comparison with the neat ionomer. Dispersion and adhesion of the fillers in the ionomer matrix has been amply supported by their SEM micrographs. Microwave probing of the electrical behavior of the 26.5 ZnSRISGNR ionomer reveals that the maximum relative complex conductivity and the complex permittivity appear at the frequency of 2.6 GHz. The complex conductivity of the base polymer increases from 1.8x 10.12 S/cm to 3.3xlO·4 S/cm. Influence of fillers on the dielectric constant and conductivity of the new ionic thermoplastic elastomer has been studied. The ionomer I nylon compound shows the highest microwave conductivity. Use of the 26.5 ZnS-RISGNR ionomer as a compatibilizer for obtaining the technologically compatible blends from the immiscible SBR/NBR system has been verified. The heat fugitive ionic cross-linked natural rubber may be, therefore, useful as an alternative to vulcanized rubber and thermoplastic elastomer

Molecular breakdown of different forms of natural rubber and its influence on properties of their mixes and vulcanizates

The forms of natural rubber studied were sheet [RSS 4 and RSS 5], ISNR 20 and EBC. In the case of the latter two forms samples from estate and nonestate sectors were included. The samples were collected from different locations at specified intervals, for a particular period. The effect of the extent of mastication on raw rubber properties as well as the properties of the compounds and vulcanizates also studied. The consistency in raw rubber properties and breakdown behavior of skim rubber were studied by collecting samples periodically from selected processing units. The effect of incorporation of skim with ISNR 20 has also been investigated

Behavior of geopolymer concrete exposed to elevated temperatures

The research in the area of geopolymer is gaining momentum during the past 20 years. Studies confirm that geopolymer concrete has good compressive strength, tensile strength, flexural strength, modulus of elasticity and durability. These properties are comparable with OPC concrete.There are many occasions where concrete is exposed to elevated temperatures like fire exposure from thermal processor, exposure from furnaces, nuclear exposure, etc.. In such cases, understanding of the behaviour of concrete and structural members exposed to elevated temperatures is vital. Even though many research reports are available about the behaviour of OPC concrete at elevated temperatures, there is limited information available about the behaviour of geopolymer concrete after exposure to elevated temperatures. A preliminary study was carried out for the selection of a mix proportion. The important variable considered in the present study include alkali/fly ash ratio, percentage of total aggregate content, fine aggregate to total aggregate ratio, molarity of sodium hydroxide, sodium silicate to sodium hydroxide ratio, curing temperature and curing period. Influence of different variables on engineering properties of geopolymer concrete was investigated. The study on interface shear strength of reinforced and unreinforced geopolymer concrete as well as OPC concrete was also carried out. Engineering properties of fly ash based geopolymer concrete after exposure to elevated temperatures (ambient to 800 °C) were studied and the corresponding results were compared with those of conventional concrete. Scanning Electron Microscope analysis, Fourier Transform Infrared analysis, X-ray powder Diffractometer analysis and Thermogravimetric analysis of geopolymer mortar or paste at ambient temperature and after exposure to elevated temperature were also carried out in the present research work. Experimental study was conducted on geopolymer concrete beams after exposure to elevated temperatures (ambient to 800 °C). Load deflection characteristics, ductility and moment-curvature behaviour of the geopolymer concrete beams after exposure to elevated temperatures were investigated. Based on the present study, major conclusions derived could be summarized as follows. There is a definite proportion for various ingredients to achieve maximum strength properties. Geopolymer concrete with total aggregate content of 70% by volume, ratio of fine aggregate to total aggregate of 0.35, NaOH molarity 10, Na2SiO3/NaOH ratio of 2.5 and alkali to fly ash ratio of 0.55 gave maximum compressive strength in the present study. An early strength development in geopolymer concrete could be achieved by the proper selection of curing temperature and the period of curing. With 24 hours of curing at 100 °C, 96.4% of the 28th day cube compressive strength could be achieved in 7 days in the present study. The interface shear strength of geopolymer concrete is lower to that of OPC concrete. Compared to OPC concrete, a reduction in the interface shear strength by 33% and 29% was observed for unreinforced and reinforced geopolymer specimens respectively. The interface shear strength of geopolymer concrete is lower than ordinary Portland cement concrete. The interface shear strength of geopolymer concrete can be approximately estimated as 50% of the value obtained based on the available equations for the calculation of interface shear strength of ordinary portland cement concrete (method used in Mattock and ACI). Fly ash based geopolymer concrete undergoes a high rate of strength loss (compressive strength, tensile strength and modulus of elasticity) during its early heating period (up to 200 °C) compared to OPC concrete. At a temperature exposure beyond 600 °C, the unreacted crystalline materials in geopolymer concrete get transformed into amorphous state and undergo polymerization. As a result, there is no further strength loss (compressive strength, tensile strength and modulus of elasticity) in geopolymer concrete, whereas, OPC concrete continues to lose its strength properties at a faster rate beyond a temperature exposure of 600 °C. At present no equation is available to predict the strength properties of geopolymer concrete after exposure to elevated temperatures. Based on the study carried out, new equations have been proposed to predict the residual strengths (cube compressive strength, split tensile strength and modulus of elasticity) of geopolymer concrete after exposure to elevated temperatures (upto 800 °C). These equations could be used for material modelling until better refined equations are available. Compared to OPC concrete, geopolymer concrete shows better resistance against surface cracking when exposed to elevated temperatures. In the present study, while OPC concrete started developing cracks at 400 °C, geopolymer concrete did not show any visible cracks up to 600 °C and developed only minor cracks at an exposure temperatureof 800 °C. Geopolymer concrete beams develop crack at an early load stages if they are exposed to elevated temperatures. Even though the material strength of the geopolymer concrete does not decrease beyond 600 °C, the flexural strength of corresponding beam reduces rapidly after 600 °C temperature exposure, primarily due to the rapid loss of the strength of steel. With increase in temperature, the curvature at yield point of geopolymer concrete beam increases and thereby the ductility reduces. In the present study, compared to the ductility at ambient temperature, the ductility of geopolymer concrete beams reduces by 63.8% at 800 °C temperature exposure. Appropriate equations have been proposed to predict the service load crack width of geopolymer concrete beam exposed to elevated temperatures. These equations could be used to limit the service load on geopolymer concrete beams exposed to elevated temperatures (up to 800 °C) for a predefined crack width (between 0.1mm and 0.3 mm) or vice versa. The moment-curvature relationship of geopolymer concrete beams at ambient temperature is similar to that of RCC beams and this could be predicted using strain compatibility approach Once exposed to an elevated temperature, the strain compatibility approach underestimates the curvature of geopolymer concrete beams between the first cracking and yielding point.

Institutions, Behavior and Evolution

The three articles constituting this thesis are for reasons of content or method related to the following three fields in economics: Behavioral Economics, Evolutionary Game Theory and Formal Institutional Economics. A core element of these fields is the concept of individual preferences. Preferences are of central importance for the conceptional framework to analyze human behavior. They form the foundation for the theory of rational choice which is defined by the determination of the choice set and the selection of the most preferred alternative according to some consistency requirements. The theory of rational choice is based on a very simplified description of the problem of choice (object function and constraints). However, that choices depend on many more factors is for instance propagated by psychological theories and is supported by many empirical and experimental studies. This thesis adds to a better understanding of individual behavior to the extent that the evolution of certain characteristics of preferences and their consequences on human behavior forms the overarching theme of the dissertation. The long-term effect of evolutionary forces on a particular characteristic of importance in the theoretical, empirical and experimental economic literature, the concept of inequality aversion, is subject of the article “The evolution of inequality aversion in a simplified game of life” (Chapter 4). The contribution of the article is the overcoming of a restriction of former approaches to analyze the evolution of preferences in very simple environments. By classifying human interaction into three central economic games, the article provides a first step towards a simplified and sufficiently complete description of the interaction environment. Within such an environment the article characterizes the evolutionary stable preference distribution. One result shows, that the interaction of the aforementioned three classes can stabilize a preference of inequality aversion in the subpopulation which is favored in the problem of redistribution. The two remaining articles are concerned with social norms, which dissemination is determined by medium-run forces of cultural evolution. The article “The impact of market innovations on the evolution of social norms: the sustainability case.“ (Chapter 2) studies the interrelation between product innovations which are relevant from a sustainability perspective and an according social norm in consumption. This relation is based on a conformity bias in consumption and the attempt to avoid cognitive dissonances resulting from non-compliant consumption. Among others, it is shown that a conformity bias on the consumption side can lead to multiple equilibria on the side of norm adoption. The article “Evolution of cooperation in social dilemmas: signaling internalized norms.” (Chapter 3) studies the emergence of cooperation in social dilemmas based on the signaling of social norms. The article provides a potential explanation of cooperative behavior, which does not rely on the assumption of structured populations or on the unmotivated ability of social norms to restrict individual actions or strategy spaces. A comprehensive result of the single articles is the explanation of the phenomenon of partial norm adaption or dissemination of preferences. The plurality of the applied approaches with respect to the proximity to the rational choice approach and regarding the underlying evolutionary mechanics is a particular strength of the thesis. It shows the equality of these approaches in their potential to explain the phenomenon of cooperation in environments that provide material incentives for defective behavior. This also points to the need of a unified framework considering the biological and cultural coevolution of preference patterns.

Interaction and Intelligent Behavior

We introduce basic behaviors as primitives for control and learning in situated, embodied agents interacting in complex domains. We propose methods for selecting, formally specifying, algorithmically implementing, empirically evaluating, and combining behaviors from a basic set. We also introduce a general methodology for automatically constructing higher--level behaviors by learning to select from this set. Based on a formulation of reinforcement learning using conditions, behaviors, and shaped reinforcement, out approach makes behavior selection learnable in noisy, uncertain environments with stochastic dynamics. All described ideas are validated with groups of up to 20 mobile robots performing safe--wandering, following, aggregation, dispersion, homing, flocking, foraging, and learning to forage.

Thermal Noise Behavior of the Bridge Circuit

This paper considers a connection between the deterministic and noisy behavior of nonlinear networks. Specifically, a particular bridge circuit is examined which has two possibly nonlinear energy storage elements. By proper choice of the constitutive relations for the network elements, the deterministic terminal behavior reduces to that of a single linear resistor. This reduction of the deterministic terminal behavior, in which a natural frequency of a linear circuit does not appear in the driving-point impedance, has been shown in classical circuit theory books (e.g. [1, 2]). The paper shows that, in addition to the reduction of the deterministic behavior, the thermal noise at the terminals of the network, arising from the usual Nyquist-Johnson noise model associated with each resistor in the network, is also exactly that of a single linear resistor. While this result for the linear time-invariant (LTI) case is a direct consequence of a well-known result for RLC circuits, the nonlinear result is novel. We show that the terminal noise current is precisely that predicted by the Nyquist-Johnson model for R if the driving voltage is zero or constant, but not if the driving voltage is time-dependent or the inductor and capacitor are time-varying

La sabiduría como competencia gerencial

Aunque el concepto de sabiduría ha sido ampliamente estudiado por expertos de áreas como la filosofía, la religión y la psicología, aún enfrenta limitaciones en cuanto a su definición y evaluación. Por esto, el presente trabajo tiene como objetivo, formular una definición del concepto de sabiduría que permita realizar una propuesta de evaluación del concepto como competencia en los gerentes. Para esto, se realizó un análisis documental de tipo cualitativo. De esta manera, se analizaron diversos textos sobre la historia, las definiciones y las metodologías para evaluar tanto la sabiduría como las competencias; diferenciando la sabiduría de otros constructos y analizando la diferencia entre las competencias generales y las gerenciales para posteriormente, definir la sabiduría como una competencia gerencial. Como resultado de este análisis se generó un prototipo de prueba denominado SAPIENS-O, a través del cuál se busca evaluar la sabiduría como competencia gerencial. Como alcances del instrumento se pueden identificar la posibilidad de medir la sabiduría como competencia en los gerentes, la posibilidad de dar un nuevo panorama a las dificultades teóricas y empíricas sobre la sabiduría y la posibilidad de facilitar el estudio de la sabiduría en ambientes reales, más específicamente en ambientes organizacionales.