Erosão e sedimentação no Delta do São Francisco: considerações sobre a interferência dos barramentos no sistema costeiro

The São Francisco river delta is an important sedimentation environment located between the States of Sergipe and Alagoas. Due to a set of factors (physical processes and anthropic interference), a process of coastal erosion is currently happening quickly in their mouth. The sedimentation dynamics and coastal erosion in São Francisco river mouth and the reasons for the process of erosion is occurring quickly were the elements of study in this work. For that, were analyzed rainfall historical data series and river flow, sediment contribution data, to examine aerial photos and satellite images, besides the use of the bibliography on the matter. The analyses made served as a basis to understand how the process is happening and to verify how the anthropic interference is contributing to the occurrence of accelerated erosion on the spot.

Gestão ambiental aplicada a prevenção, controle e recuperação de erosão linear acelerada no município de Ipeúna-SP

The erosion is a natural process of detachment, transport and deposition of soil and rock particles from one place to another. Human activities with no previous planning may accelerate this process, causing several damages to the environment and to society. In order to control the acceleration of these erosion processes caused by humans, prevention and improvement initiatives emerge. Regarding works which interfere directly in some of the natural resources, these initiatives must respect the intrinsic physical properties of the area of interest, if they aim to obtain effective results. Based on this scenario, this work proposes a few methods of accelerated linear erosion prevention, control and recovery in a specific area of the municipal district of Ipeúna (SP). For that matter, this study is based on a method of physiographic compartmentalization of the area, considering and integrating soil, relief, geology and the use and land cover properties of the study area. Plus, a flowchart with general orientations regarding management of eroded areas was produced, focused on the control and recovery of linear erosion. The result demonstrates the importance of careful erosion control, respecting the physical properties of each physiographic unit. The vegetative and mechanical conservationists methods, and the discipline of water flow, have found wide applicability in the study area.

Avaliação das taxas de erosão química da bacia hidrográfica do Ribeirão Monjolo Grande, Ipeúna (SP)

The development of human societies and their activities generate many impacts on the environment and natural resources. The consequence of these problems is a disturbance of the systemic dynamics of Planet Earth. Study these impacts are a way to understand the workings of this system and undertake efforts to prevent minimize and anticipate scenarios caused by environmental impacts. In this sense, from a systemic approach seeks to understand the way how is the interaction of the components of the ecosystems, adopting for this task the hydrographic basin as a natural unit of planning and management in view of the fact all landscape elements (atmosphere, hydrosphere, biosphere and geosphere) interact so that the reflections of human activities can be represented in this unit. Thus, this study aims to quantify chemical erosion rates in the hydrographic basin of Ribeirao Monjolo Grande, Ipeúna (SP), which is relevant to analyze the geomorphological characteristics of the area, which may serve to better exploitation of natural resources

Tecnologias, conceitos e propostas de materiais de construção sustentável do Centro de Vivências da UNESP, Rio Claro/SP

Due to the great impact caused by construction, the university has a major role in the development of alternative projects and studies aimed at sustainable development. This project presents the advantages and importance of building in a sustainable manner from the beginning to end of the Center of Experiences at UNESP, Rio Claro / SP. It will be presented alternative building materials that have high environmental performance and that bring the least negative impacts as possible. Providing a Center of Experiences through a sustainable building is in need of the university to renovate the new trends of society in which the construction is in harmony with the environment in which it is inserted. This sustainable building will serve as a model for students and residents of Rio Claro, since the building itself will serve as a way of learning to the audience goer, as well as for the other campuses of UNESP. Thus, this project will serve as a guide for decision makers facing the huge amount of building materials available in the market

Materiais didáticos para o estudo das aves: ferramenta para a educação ambiental

Exemplos da perturbação do meio ambiente pela ação humana são recorrentes. Frente a isto, fica evidente a necessidade de mudança deste quadro, pois áreas com alto valor ecológico são amplamente afetadas, prejudicando as interações entre animais e plantas, nas quais as aves se destacam, sendo elas um grupo com claro papel na dinâmica de ecossistemas e de fácil identificação. Em vários aspectos, o conhecimento científico pode ser visto como um grande aliado para esta mudança. Visando a formação de cidadãos, a Educação Ambiental mostra-se como um importante meio de conscientização. Neste contexto, este trabalho se dispôs a confeccionar um guia didático e um jogo educativo sobre as aves, destinados a alunos do 7º ano do Ensino Fundamental,, visando propiciar aprendizado durante a observação das mesmas. Os materiais foram propostos a partir de uma lista elaborada no presente estudo, que reuniu nove levantamentos realizados na Fazenda Experimental Edgardia, vinculada à Universidade Estadual Paulista - UNESP, Campus de Botucatu, SP, de 1992 a 2010. Uma primeira versão dos materiais foi confeccionada e avaliada por um grupo de alunos, possibilitando a produção de sua versão final

Estudo da reutilização de materiais reciclados em obras de construção civil

This graduation project aims to study and analyze the reuse of solid waste projects in Civil Construction, checking the different factors such as economic viability, production processes, classification of the main materials, advantages and disadvantages, always seeking to guide themselves according Brazilian legislation establishing criteria for Waste Management of Construction. In addition, points are studied that prevent the expansion of recycling construction waste. It also offers needs improvements to the implementation of recycling to be carried out on a more expressive than current

Avaliação das taxas de erosão química e física na bacia hidrográfica do Ribeirão Jacutinga (SP)

Currently with the growing technological advancement and global, new areas are being devastated, and as a result, the erosion became more frequent causing loss of soil, infiltration capacity of the surface and weathering of rocks. In this way, environmental studies are increasingly frequent to understand the environment in which we live, but also to avoid any degradation of the same and of finite natural resources, which are essential for human life. From this, this work has as main goal, analyzing the rates of chemical and mechanical erosive watershed of Ribeirão Jacutinga, at its mouth, in the city of Rio Claro, supporting environmental studies and sustainable development today. Order to reach these values were measured and total dissolved solids in suspension in the stream during the months from January to July 2012. As results included higher rates of both physical and chemical weathering in the rainy months, especially january

Biodegradação de materiais poliméricos por fungos filamentosos

The use of polymeric materials has grown in recent years due to its high durability features, atoxicity, shaping versatility and environment resistance. However, while these features represent good advantages to several industry sectors, it results in one of the most serious environmental problems of contemporary society: the rising accumulation of these material, mainly due to the inadequate disposal of waste. Meanwhile, in order to minimize this problem, some mitigation techniques comes up (arises), among which the use of biodegradable polymers has been gaining attention. Because of their easily action of microorganisms, such material degrade more rapidly, becoming integrated to nature. Furthermore, due to the fact of biodegradation is a natural process, occurring through the action if micro-organisms in the environment itself, it is considered the “cleaner” alternative found so far to plastic components reincorporation in the nature. Among the micro-organisms capable of biodegradation process are the filamentous fungi. These micro-organisms have many advantages over the others, the major one being the capacity to produce a range of enzymes capable of degrading different materials. In this context, the present review made it possible to see the importance of this process as an agent of environmental preservation, suggest the use of blends to minimize the problems of cost and flexibility of biodegradable polymeric materials, as well as noting the lack of studies related to this subject nowadays

Avaliação mecânica da colagem estrutural entre compósitos poliméricos e materiais metálicos utilizados em dutos petroquímicos

The development of technology for structural composites has as one of its ends form a set of materials that combine high values of mechanical strength and stiffness and low density. Today, companies like Embraer and PETROBRAS and research institutions like NASA, working with these materials with recognized advantages in terms of weight gain, increased performance and low corrosion. We have developed a systematic study to determine the bond strength between composite carbon fiber / epoxy and fiberglass / epoxy laminate both bonded to a carbon steel which are widely used in the petrochemical industry and repair. For morphological evaluation and bonding between materials of different natures, ultrasound analysis, optical microscopy and stereoscopy were performed. To simulate actual conditions, the composites were subjected to conditioning by using heat shock temperatures from -50 to 80 ° C for 1000 cycles for composite carbon fiber / epoxy composites and 2000 cycles for fiberglass / epoxy . The use of composites studied here proved to be efficient to perform repairs in metallic pipes with application petrochemical, as when exposed to sudden changes of temperature (-50 ° to 80 ° C) cycling at 1000 to 2000 times, its mechanical properties (shear and tensile) practically do not change

Bioengenharia no controle de processos erosivos de áreas de hidrelétricas – o caso da PCH Costa Rica (MS)

The crescent increasing demand of the electric power in Brazil has stimulated the implantation of Small Central Hydroelectric Power (SCHP) in several regions of the country. However, the silting up of the reservoirs is one of the main problems faced by hydroelectric power plants and SCHP. In this context, this research aimed evaluate the phenomenology and propose the enforcement of appropriate bioengineering techniques to control the intense erosive process of the hydrographical basin of the “Alto Rio Sucuriú,” that cause silting up of the reservoirs of the SCHP Costa Rica, located in the municipal district of Costa Rica (MS). In order to identify the phenomenology of the main falling in of this basin, a diagnosis of the conditions of the physical environment of the region (climate, geology, pedology, hydrology, and use of the ground) was realized. A surveying was also realized to specify the geometric feature of the falling in using the Total Station of the Ruide brand, series RTS 860R and the geodetic GPS of the Ashtech brand and the data obtained was used on the preparation of the Digital Elevation Model (DEM) of the falling in. Based on this diagnosis an official register of the falling in was done with identification of the different types of present erosion. Due to the advanced erosive stage of the falling in researched, the use of bioengineering techniques could be the best solution considering that the traditional engineering techniques make use of heavy material like concrete, iron and large machines that besides causing higher impact to the natural and esthetic aspects of the environment also require a higher investment of capital. This research establish a great cooperation to the knowledge of the erosive process and of the rehabilitation of the degraded areas with application of bioengineering techniques not only hydrographical basin of “Alto Rio Sucuriú” but also to other basins that show similar situation

A abordagem do voseo em materiais didáticos brasileiros de ensino do espanhol como língua estrangeira

This work discusses the importance of the language varieties in the Spanish language to the process of teaching and learning Spanish as a foreign language (ELE), focusing on the approach, ie, how to deal with the phenomenon voseo in Brazilian textbooks. It presents a brief historical overview on the arising of this language and its implementation in Latin America. From an educational approach that values a good development of communicative competence, it’s driven to a presentation of the Spanish schoolbooks selected by PNLD for the year 2012, as well as an observation of activities that demonstrate the phenomenon called voseo, in other words, the use of the variety of the pronoun vos instead of tú for the treatment of the second person. Given the vast range of Spanish courses as a foreign language for high school students, and the growing interest of young people in learning a second language, this study addresses the importance of developing the communicative competence of a foreign language

Colheita de energia usando dispositivos baseados em materiais piezoelétrico

Recently, research on energy harvesting has increased substantially. Many researchers have concentrated their efforts to find the best configuration for these systems and to optimize their output power. In the process of energy harvesting, the electric energy is obtained by converting mechanics energy created by an environment vibration source by a transducer, for example, a thin piezoceramic film. That vibration source is, for example, a beam suffering some mechanic force able to generate a vibration in it, an oscillating beam is the best properly used example. Different mechanisms of electromechanical coupling have been developed to harvesting devices, and a particular interest has been given to the use of models that transform the mechanical vibration into electrical current using a piezoelectric element. In this paper we propose a model to energy harvesting from vibrations, from an oscillating beam, including non-linearities in the piezoelectric coupling and a non-ideal excitation in the material. From this model, it was developed a system to obtain some results about the harvested power by the material. It was demonstrated that the power captured was influenced by the effect of the nonlinearities of the piezoelectric coupling, modifying the system dynamic behavior

Estudo de casos de seleção dos materiais e processos para a fabricação de fuselagens

This work proposes a study on the materials selections and processes for the manufacture of aircraft and showing a methodology to reduce the manufacturing cost. The DFMA can be understood as a methodology that aims at reducing manufacturing and assembly costs and coupled with the increase of product quality through design simplifications. The most commonly material used in the manufacture of aircraft is aluminum alloys due to these possess great structural strength, good elasticity, and being stainless having a low specific weight (about 1/3 that of steel), reducing the weight of the aircraft. A case study in which an operation in the process of verifying the quality was generating unnecessary costs time / man for the company was also developed. The problem solution was simple, just removing the attachment process. It was found that the DFMA methodology is extremely important for the simplification of processes and projects, contributing to the reduction of manufacturing costs of aircraft

Identificação de áreas de risco na região urbana do município de Guaratinguetá, SP, quanto à ocorrência de inundações e processos erosivos

The city of Guaratinguetá, SP, presents in its history, several instances of property damage and human losses, conditional on the event of flooding and mass movement of soil, resulting from the development of erosion processes. The extent and severity of these events that affect humans and their properties is the result of the illegal occupation of these areas as potential geohazard. Thus, it is of great importance to physical characterization and identification of such areas within the map of the same city as a way to minimize the effects and mitigate the consequences of these events. Thus, this graduate report presents a series of field campaigns, geotechnical laboratory testing, consultation with maps and satellite images, representative of the physical environment, and the city plan as a means conclusive for the delimitation of risk areas with potential for occurrence of erosion and / or flooding on the map representing the urban area of Guaratinguetá, SP. Also featured are the descriptions of the main characteristics of those areas identified as being at risk, along with proposals to avoid or minimize the impact of problems related to flooding and erosion processes on the local population

SIG e álgebra de mapas na elaboração de um mapa de potencial de erosão em áreas de silvicultura

Cette étude visait à générer une carte du potentiel d'érosion pour la Ferme Santa Edwirges, située à Lorena /SP. Les résultats ont etés classifiés en faible, modéré, élève et très élève potentiel d'érosion et la carte obtenue a été comparé par rapport aux autres cartes existantes pour la zone d'étude. La méthodologie proposée se basant sur une application qualitative simple L’équation Universelle de Perte de Sol (USLE ou EUPS), en considérant les parties de l'équation: érodibilité, la topographie et l'utilisation des terres. Les donnés ont etés intégrés par l'algèbre de carte dans l’environnement SIG de ArcGIS. Pour la représentation de chacune de ces parcelles, nous avons utilisé une carte des formations superficielles de la ferme, généré à partir d'une ré-interprétation de la carte géologique, une carte de la pente et une carte d'utilisation des terres, attribuant un poids d’important pour chaque catégorie de ces cartes dans le processus d'érosion et dans l'algèbre proposée. Les résultats obtenus sont compatibles avec les zones identifiées comme les plus critiques sur terrain. La ferme a été identifiée comme de potentiel d'érosion modérée et la partie sud de la ferme le plus critique, suivi du groupe conduit par la zone de cisaillement, par contre les plaines proches des rivières ont eté identifié comme la zone plus stable avec moins de potentiel d'érosionDe la comparaison des résultats de ce travail et d'autres qui ont fait antérieurement dans la zone d’intéresse, qui ont utilisé les paramètres géotechniques dans la représentation de l'érosivité des sols, nous avons pu voir des résultats similaires, en particulier dans les zones à potentiel élevé et faible pour l'érosion. De la discussion et analyse des résultats, la méthodologie proposée à eté validée