A note on the horseshoe confinement model: the Poynting-Robertson effect

In the present work we numerically simulated the motion of particles coorbital to a small satellite under the Poynting-Robertson light drag effect in order to verify the symmetry suggested by Dermott et al. (1979, 1980) on their ring confinement model. The results reveal a more complex scenario, especially for very small particles (micrometer sizes), which present chaotic motion. Despite the complexity of the trajectories the particles remain confined inside the coorbital region. However, the dissipative force caused by the solar radiation also includes the radiation pressure component which can change this configuration. Our results show that the inclusion of the radiation pressure, which is not present in the original confinement model, can destroy the configuration in a time much shorter than the survival time predicted for a dust particle in a horseshoe orbit with a satellite.

Moonlets wandering on a leash-ring

Since the Voyager flybys, embedded moonlets have been proposed to explain some of the surprising structures observed in Saturn's narrow F ring. Experiments conducted with the Cassini spacecraft support this suggestion. Images of the F ring show bright compact spots, and seven occultations of stars by the F ring, monitored by ultraviolet and infrared experiments, revealed nine events of high optical depth. These results point to a large number of such objects, but it is not clear whether they are solid moonlets or rather loose particle aggregates. Subsequent images suggested an irregular motion of these objects so that a determination of their orbits consistent with the F ring failed. Some of these features seem to cross the whole ring. Here we show that these observations are explained by chaos in the F ring driven mainly by the 'shepherd' moons Prometheus and Pandora. It is characterized by a rather short Lyapunov time of about a few hundred orbital periods. Despite this chaotic diffusion, more than 93 per cent of the F-ring bodies remain confined within the F ring because of the shepherding, but also because of a weak radial mobility contrasted by an effective longitudinal diffusion. This chaotic stirring of all bodies involved prevents the formation of 'propellers' typical of moonlets, but their frequent ring crossings explain the multiple radial 'streaks' seen in the F ring. The related 'thermal' motion causes more frequent collisions between all bodies which steadily replenish F-ring dust and allow for ongoing fragmentation and re-accretion processes (ring recycling).

Some comments on the F ring-Prometheus-Pandora environment

The system formed by the F ring and two close satellites, Prometheus and Pandora, has been analysed since the time that Voyager visited the planet Saturn. During the ring plane crossing in 1995 the satellites were found in different positions as predicted by the Voyager data. Besides the mutual effects of Prometheus and Pandora, they are also disturbed by a massive F ring. Showalter et al. [Icarus 100 (1992) 394] proposed that, the core of the ring has a mass which corresponds to a moonlet varying in size from 15 to 70 kin in radius which can prevent the ring from spreading due to dissipative forces, such as Poynting-Robertson drag and collisions. We have divided this work into two parts. Firstly we analysed the secular interactions between Prometheus-Pandora and a massive F ring using the secular theory. Our results show the variation in eccentricity and inclination of the satellites and the F ring taking into account a massive ring corresponding to a moonlet of different sizes. There is also a population of dust particles in the ring in the company of moonlets at different sizes [Icarus 109 (1997) 304]. We also analysed the behaviour of these particles under the effects of the Poynting-Robertson drag and radiation pressure. Our results show that the time scale proposed for a dust particle to leave the ring is much shorter than predicted before even in the presence of a coorbital moonlet. This result does not agree with the confinement model proposed by Dermott et al. [Nature 284 (1980) 309]. In 2004, Cassini mission will perform repeated observations of the whole system, including observations of the satellites and the F ring environment. These data will help us to better understand this system. (C) 2003 COSPAR. Published by Elsevier Ltd. All rights reserved.

Analytic solutions for the Lambda-FRW model

The high precision attained by cosmological data in the last few years has increased the interest in exact solutions. Analytic expressions for solutions in the Standard Model are presented here for all combinations of Lambda = 0, Lambda not equal 0, kappa = 0, and kappa = 0, in the presence and absence of radiation and nonrelativistic matter. The most complete case (here called the Lambda gamma CDM Model) has Lambda not equal 0, kappa not equal 0, and supposes the presence of radiation and dust. It exhibits clearly the recent onset of acceleration. The treatment includes particular models of interest such as the Lambda CDM Model (which includes the cosmological constant plus cold dark matter as source constituents).

Wet deposition of major ions in a rural area impacted by biomass burning emissions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of Intensive Agriculture on Dry Deposition of Aerosol Nutrients

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

On the first nu(6) anti-aligned librating asteroid family of Tina

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aerosol and precipitation chemistry measurements in a remote site in Central Amazonia: the role of biogenic contribution

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The role of Mab as a source for the mu ring of Uranus (Research Note)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

New treatment for frontal sinus hypertrophy

A new treatment of frontal sinus hypertrophy is described. The anterior wall is removed, inverted, and attached again. The resulting depression is filled with bone dust. Details are discussed, and a case is presented.

The Levi-Civita space-time

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comportamento fractal de tracos de fraturas na borda sul do macico granitico de itu, estado de Sao Paulo

Fractal geometry is relevant to understand and explain many natural complex geometries. Using the fractal set concept (fig. 1) many authors have shown that shorelines, landscapes and fractures follow a fractal behaviour. These authors have developed many methods, including the Cantor's Dust Method (CDM) (VELDE et al., 1992), a linear method of analysis adapted for the determination of two-dimensional phenomena. The Itu Granitic Complex (IGC) is a wide granitic body that that crops out at northwest of Cabreuva City, Sao Paulo State (fig. 2) and was affected in its south border by dextral Itu-Jundiuvira Shear Zone (IJSZ) that produced fractures and alignment of feldspars crystals. The different types of fractures (compression, distension and shear) was discriminated from the relationship between them and medium stress ellipsoid of IJSZ (fig. 3). A modified version of CDM was used to study a possible fractal behaviour of the fracture traces in the south border of IGC. The main modification was the use only one direction of analysis (NE/SW). Four parallel profiles were traced with lengths between 9.75km and 12.75km, each one them was divided into six classes of segments (x) with 375m, 500m, 750m, 1.000m, 1.250m and 1.500m. The parameter (N) is provided by he rate between profile length and choiced segment. For each x the number of intervals is counted with at least one event (fracture intersection) which supplied the parameter(n). The n/N rate provide the parameter (p) that represents the relationship between frequency of events and x. And finally the parameters p and x were plotted in a logarithmic graphics (fig. 4) that provide a line with such a declivity (1) which is related to effective dimension (De). In theory, granitics bodies are isotropics and they would have a same fractal dimension in all segments, but the logarithmic graphics (fig. 4) show that fracture traces of IGC has a fractal behaviour in a restrict interval. This fact probably occurs from the passage of a ductil-brittle deformation condition to a more brittle deformation condition of IGC.

Corrosion behavior in graphite refractories impregnated with ZrO 2 and CeO 2 carrying solutions

This paper investigates corrosion behavior in graphite refractory hot metal impregnated with ZrO 2 and CeO 2 carrying solutions used in Blast Furnace hearth, consisting of 50% graphite and 50% anthracite. Corrosions tests were carried out by means of finger test method in an induction furnace, using bar-shaped 30×30×280 mm test specimens and hot metal from CSN#2 Blast Furnace runner. The temperature chosen for this test was 1520°C and sixty-minute isotherm. Upon test completion, test specimens were characterized by their dimensional variation, X-ray diffractometry and Scanning Electronic Microscopy (SEM).

Effectiveness of intraoral suction systems and aspirating tips for evacuation of aluminum oxide particles during use of air-abrasion

Aim: The purpose of this study was to compare the effectiveness of a high-volume evacuation and a conventional intraoral suction system and aspirating tips for capturing aluminum oxide particles during use of an air-abrasion device. Methods: A phantom head was fixed at the dental chair head with secured a metallic device with 5 horizontal shafts, corresponding to operator's clockrelated working positions, and one vertical shaft to simulate the operator's nasal cavity. Petri plates were fixed to the shafts at distances of 20, 40 and 60 cm from the center of the oral cavity of the phantom head to collect the aluminum oxide particles spread over during air abrasion. The dust was aspirated with two types of suction tips used with both suction systems: a conventional saliva ejector and a saliva ejector customized by the adaptation of a 55-mm-diameter funnel. Results: The amount of particles showed that the greatest abrasive particle deposition occurred at a distance of 20 cm from the center of the oral cavity of the phantom head at 9 o'clock operatory position with the conventional saliva ejector attached to high-volume evacuation system. Conclusions: The greatest deposition of aluminum oxide particles occurred at the shortest distance between the operator and the center of the oral cavity, while using the high-volume evacuation system associated to the conventional suction tip.

Some aspects of chicken behavior and welfare

Brazil is the world leader in broiler production and export. It achieved this position mainly to its excellent supply chain structure and climate, which favor poultry and grain production throughout its territory. Although Brazilian egg production is not as important as broiler production, this segment presents great potential of increasing its share in the global market. However, as elsewhere in the world, Brazilian poultry production faces the challenge to balance two elements within its supply chain: cruelty and productivity. The consumers of the European Union (EU) are very concerned with animal welfare issues. In order to increase its share in the European market, and eventually in the world market, Brazilian poultry producers must understand the effects of production systems on poultry welfare, and try to develop systems that are suited for its climate and other production conditions. There is a consensus that the natural behaviors performed by poultry in intensive production systems allow better welfare. This objective of this review is to present scientific research studies that relate different behaviors to chicken welfare. Poultry behavior is a reflex of their welfare status at a particular moment, and it is related to internal (physiological) and external (environmental) factors. Several natural behaviors that favor welfare, as well as undesirable behaviors, may be stimulated by environmental enrichment. The correct interpretation of the behaviors expressed by poultry, including their frequency, duration, and sequence, may be used to estimate their welfare. Animal production is an import sector of Brazilian economy. It significantly contributes to the Gross Domestic Product (GDP), in terms of products destined both to domestic consumption and exports. New technologies applied to products and management practices have been developed for field application, aiming at improving producers' productivity and profitability. In order to comply with the European Union's (EU) guidelines for animal protein production, Brazilian poultry production needs to undergo a process of adaptation. In May, 2007, the EU Commission established its new guidelines for animal welfare in poultry production, pressured by consumer demand. In the EU, there is a growing concern among consumers as to how poultry are reared and slaughtered. European consumers are in the fore front of the demand of high quality products produced with under better welfare conditions, and have spread this concern throughout the world. Beaumont et al. (2010) mentioned that European consumers frequently perceive that standard commercial poultry production has poor animal welfare practices. According to Nääs et al. (2008), Brazilian poultry production today needs to find a balance between cruelty and productivity. In fact, ensuring animal welfare may provide better financial results, as it increases the producer's profit margins and allows maintaining Brazilian chicken export quotas to the EU. França (2008) noted that biological studies that define ethical limits and guidelines for poultry production foster the development of new production practices that may ensure good product quality and productivity without putting bird welfare at risk. Gonyou (1994) states that, when animal welfare started to be studied, the only behavioral factors considered were those related to feeding and reproduction. These first studies used as indicators of animal welfare reduced life expectancy, impaired growth, impaired reproduction, body damage, disease, immunosuppression, adrenal activity, behavior anomalies, and self-narcotization (Broom, 1991). However, current studies evaluate additional indicators, such as natural behaviors, behavioral needs, preferences, behavioral problems, emotional state, cognitive abilities, etc. In the field of ethology, the expression of natural behavior is a frequently used tool used to estimate the welfare of poultry destined to human consumption. According to Bracke & Hopster (2006), natural behavior can be defined as the behavior the animal normaly presents when exposed to conditions similar to its natural habitat. Natural behaviors are pleasurable and promote biological functions that are meaningful to the animal's welfare. The definition of natural behavior, though, does not include the bird's behavior when sick, in flight or during aggression, since these are not considered pleasurable situations. Considering layer behavioral needs in the design of housing facilities optimize their welfare. Mishra et al. (2005) verified that ISA Brown layers spent, during 24 hours, around 97% of the time in the nest, feeding, walking, resting, or dust bathing, and that 57% of these behaviors did not depend on environmental enrichment. It was also observed that hens had preferred behavioral sequences, which included foraging and comfort behaviors, such as wing-stretching and preening. The present review aims at discussing, albeit not exhaustively, scientific research studies on the behavior of Gallusgallus domesticus and its relationship to welfare. The following behaviors are reviewed: feather pecking, scratching, dust bathing, nesting, locomotion activities, and aggressive behaviors. These behaviors are the most frequently observed in commercial broiler, broiler breeder, and layer farming, and therefore, monitoring their incidence may contribute to measure poultry welfare.