Modelling head loss along emitting pipes using dimensional analysis

Local head losses must be considered in estimating properly the maximum length of drip irrigation laterals. The aim of this work was to develop a model based on dimensional analysis for calculating head loss along laterals accounting for in-line drippers. Several measurements were performed with 12 models of emitters to obtain the experimental data required for developing and assessing the model. Based on the Camargo & Sentelhas coefficient, the model presented an excellent result in terms of precision and accuracy on estimating head loss. The deviation between estimated and observed values of head loss increased according to the head loss and the maximum deviation reached 0.17 m. The maximum relative error was 33.75% and only 15% of the data set presented relative errors higher than 20%. Neglecting local head losses incurred a higher than estimated maximum lateral length of 19.48% for pressure-compensating drippers and 16.48% for non pressure-compensating drippers.

SOCIAL MEDIA IN INTERNATIONAL BRAND COMMUNICATION OF SMES - A multiple case study of small Finnish design-intensive companies

Social media is a rather new phenomenon which has revolutionised the world of online communication. However, academic research on how companies can benefit from social media is lacking. The research objective of this thesis was to examine the use of social media in international brand communication of small Finnish design-intensive companies. Therefore, this research contributes also to the research gap in SME branding. The focus was on communication targeted at consumers. The research was carried out as a mixed methods research employing the questionnaire and multiple case study methods. The questionnaire was used to gather preliminary information on Finnish design-intensive companies and to provide an eligible list of companies for deeper examination. Then, four case companies were studied in more depth. The empirical evidence of the case companies was mainly gathered through theme interviews. The results of the questionnaire shed light on the internationalisation of small Finnish designintensive companies. On average, the companies had internationalised rather quickly after they had been founded. However, the share of exports was rather low in most of the companies. The results revealed also that social media was already used widely in the exporting companies and the use can be expected to grow in future. The findings of the multiple case study suggest that branding activities in small Finnish designintensive companies are constrained by limited resources and skills. In addition, the branding activities are strongly guided by the vision and values of the entrepreneur(s) rather than extensive marketing research. The brand structure was simple in all case companies and they aimed at having a standardised brand image across markets. However, all case companies had faced a need for some adaptation of their international brand communication. Internationally important brand communication channels were international fairs, the internet, word-of-mouth and social media. Social media offered a cost-effective brand communication channel for the case companies. It was used for various purposes, such as creating brand awareness and affecting how the brand is perceived. The entrepreneurs found the use of social media to be rather easy and the case companies had not faced any major challenges. However, the companies had recognised that communication in social media requires consistency and planning. The planning was rather informal and stayed on a general level. Overall, the utilisation of social media in the case companies was limited by a lack of resources. It seemed to affect especially the follow-up of brand communication in social media which stayed rather superficial.

Do induced twin pregnancies influence the obstetric and neonatal results of multiple births born before 32 weeks? Comparison to spontaneous gestation

PURPOSE: To compare obstetric outcomes of induced preterm twin births (under 32 weeks gestation) with those spontaneously conceived. METHODS: Prospective study of twin pregnancies (25 induced and 157 spontaneously conceived) developed over a period of 16 years in a tertiary obstetric center. Demographic factors, obstetric complications, gestational age at delivery, mode of delivery, birth weight and immediate newborn outcome were compared. RESULTS: The analysis of obstetrical complications concerning urinary or other infections, hypertensive disorders of pregnancy, gestational diabetes, fetal malformations, intrauterine fetal death, intrauterine growth restriction and intrauterine discordant growth reveal no significant statistical differences between the two groups. First trimester bleeding was higher in the induced group (24 versus 8.3%, p=0.029). The cesarean delivery rate was 52.2% in spontaneous gestations and 64% in induced gestations. Gestational age at delivery, birth weight, Apgar scores at first and fifth minutes, admissions to Neonatal Intensive Care Unit and puerperal complications show no statistically significant differences between the two groups. These results were independent of chorionicity and induction method. CONCLUSION: The mode of conception did not influence obstetric and neonatal outcomes. Although induced pregnancies have higher risk of first trimester bleeding, significant differences were not observed regarding other obstetric and puerperal complications and neonatal results.

Magnetic Resocance Imaging Methods in the Follow-up of Multiple Sclerosis and in Farby Disease

Multiple sclerosis (MS) is a chronic immune-mediated inflammatory disorder of the central nervous system. MS is the most common disabling central nervous system (CNS) disease of young adults in the Western world. In Finland, the prevalence of MS ranges between 1/1000 and 2/1000 in different areas. Fabry disease (FD) is a rare hereditary metabolic disease due to mutation in a single gene coding α-galactosidase A (alpha-gal A) enzyme. It leads to multi-organ pathology, including cerebrovascular disease. Currently there are 44 patients with diagnosed FD in Finland. Magnetic resonance imaging (MRI) is commonly used in the diagnostics and follow-up of these diseases. The disease activity can be demonstrated by occurrence of new or Gadolinium (Gd)-enhancing lesions in routine studies. Diffusion-weighted imaging (DWI) and diffusion tensor imaging (DTI) are advanced MR sequences which can reveal pathologies in brain regions which appear normal on conventional MR images in several CNS diseases. The main focus in this study was to reveal whether whole brain apparent diffusion coefficient (ADC) analysis can be used to demonstrate MS disease activity. MS patients were investigated before and after delivery and before and after initiation of diseasemodifying treatment (DMT). In FD, DTI was used to reveal possible microstructural alterations at early timepoints when excessive signs of cerebrovascular disease are not yet visible in conventional MR sequences. Our clinical and MRI findings at 1.5T indicated that post-partum activation of the disease is an early and common phenomenon amongst mothers with MS. MRI seems to be a more sensitive method for assessing MS disease activity than the recording of relapses. However, whole brain ADC histogram analysis is of limited value in the follow-up of inflammatory conditions in a pregnancy-related setting because the pregnancy-related physiological effects on ADC overwhelm the alterations in ADC associated with MS pathology in brain tissue areas which appear normal on conventional MRI sequences. DTI reveals signs of microstructural damage in brain white matter of FD patients before excessive white matter lesion load can be observed on conventional MR scans. DTI could offer a valuable tool for monitoring the possible effects of enzyme replacement therapy in FD.

Product placement on personal blogs: a multiple case study from companies’ perspective

As traditional advertising is losing its value in corporations’ marketing, new and growing social media marketing channels are increasing their importance. The growing interest in the media and the lack of research on the subject create a clear need for this study. The objectives are to increase understanding about product placement in personal blogs and examine the benefits as well as the downsides created by this marketing channel and present the requirements for success. The study also takes a stand on what kind of things a successful product placement strategy in personal blogs includes and what points should be considered when creating a strategy. The study’s empirical part consists of seven thematic interviews with case companies’ representatives and one agent. The study’s personal blogs were delimited to consist only lifestyle and fashion blogs. The results show that product placement on personal lifestyle and fashion blogs is a strongly growing marketing channel and it is best suited to reach young women. It is also a very good channel to change and improve brand image. Via personal blogs it is possible to reach a large number of consumers with a very cost-efficient manner. Thus utilizing the channel is suitable for all companies regardless of the size of the marketing budget. Of course, companies have to consider the suitability of their product to the themes of blogs. Executing a successful campaign in this media requires good relationship management skills and understanding of this particular media as the final content is not in advertiser’s hands. As a marketing channel, personal blogs differ highly from traditional marketing channels because of their constantly changing nature and multidirectional quality where several parties are in interaction.

Multiple scales analysis of nonlinear oscillations of a portal frame foundation for several machines

An analytical study of the nonlinear vibrations of a multiple machines portal frame foundation is presented. Two unbalanced rotating machines are considered, none of them resonant with the lower natural frequencies of the supporting structure. Their combined frequencies is set in such a way as to excite, due to nonlinear behavior of the frame, either the first anti-symmetrical mode (sway) or the first symmetrical mode. The physical and geometrical characteristics of the frame are chosen to tune the natural frequencies of these two modes into a 1:2 internal resonance. The problem is reduced to a two degrees of freedom model and its nonlinear equations of motions are derived via a Lagrangian approach. Asymptotic perturbation solutions of these equations are obtained via the Multiple Scales Method.

Two-Phase (Solid-Liquid) Flow in Inclined Pipes

This paper presents an experimental research about the behavior of two-phase flows in inclined pipes. The inclination angle varied from 5° to 45° and the slurry solid concentration varied up to 15%. It was concluded that the head losses of the downward sloping pipe flow are always lower than the head losses of the horizontal flow and these are always lower than the head losses of the upward sloping pipe flow, regardless the concentration and inclination angle. It was possible to develop empirical equations to calculate the head losses of the horizontal flow and the upward and downward sloping pipe flows.

Multiple resistance of Conyza sumatrensis to Chlorimuron­ethyl and to Glyphosate

Weed resistance to herbicides has been a major issue in Brazil, mainly due to the inefficiency of the herbicides used in no-till areas and to the high cost of these herbicide treatments. Failures in controlling the weed Conyza have been reported in Western and Northern grain crop areas in Paraná (Brazil). This work aimed to evaluate the potential occurrence of C. sumatrensis biotypes resistant to the herbicides chlorimuron-ethyl and glyphosate. Experiments were carried out under greenhouse conditions with four biotypes (Cascavel-2, Toledo-4, Tupãssi-6, and Assis Chateaubriand-7) possibly resistant to, as well as a population considered susceptible to chlorimuron-ethyl and glyphosate. To obtain dose-response curves, eight herbicide doses of chlorimuron-ethyl (0, 2.5, 5, 10, 20, 40, 80 and 160 g ha-1) and glyphosate (0, 90, 180, 360, 720, 1,440, 2,880 and 5,760 g e.a. ha-1) were applied and weed control and shoot biomass evaluations were made. Results provided evidence that two biotypes (Cascavel-2 and Tupãssi-6) were resistant to glyphosate and four biotypes (Cascavel-2, Toledo-4, Tupãssi-6 and Assis Chateaubriand-7) were resistant to chlorimuron­ethyl. Multiple resistance to glyphosate and chlorimuron was confirmed for biotypes Cascavel­2 and Tupãssi 6. This is the first report on multiple resistance in Conyza sumatrensis, worldwide.

MULTIPLE RESISTANCE OF Sagittaria montevidensis BIOTYPES TO ACETOLACTATE SYNTHASE AND PHOTOSYSTEM II INHIBITING HERBICIDES

ABSTRACT The objective of this research was to evaluate the occurance of multiple resistance of Sagittaria montevidensis (SAGMO) biotypes to acetolactate synthase (ALS) and photosystem II (PSII) inhibiting herbicides through dose-response experiments. The experiment was conducted in a greenhouse from October 2012 to March 2013, in Pelotas, RS. The experimental design was completely randomized, with four replications. Treatments were arranged in a triple factorial design: two biotypes of S. montevidensis(SAGMO 35 - susceptible to herbicides and SAGMO 32 - suspected to be multiple resistance to ALS and PSII inhibiting herbicides), four herbicides (penoxsulam, (imazethapyr+imazapic), bentazon and saflufenacil) and 8 rates of these herbicides (1/32x, 1/16x, 1/8x, 1/4x, 1/2x, 0x, 1x, 2x, 4x, 8x, 16x, 32x and 64x). SAGMO 32 biotype presented high levels of resistance to penoxsulam, (imazethapyr+imazapic) and bentazon. For a 50% reduction in dry matter of the resistant biotype rate of 138 and 2.46 times higher than the label required for the susceptible biotype of the herbicides (imazethapyr+imazapic) and bentazon, respectively, are required. Saflufenacil may be used successfully to controlSagittaria montevidensis resistant in irrigated rice.

When Metadata Collides: Lessons on Combining Records from Multiple Repository Systems.

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Multiple forms of cotyledonary b-galactosidases from Vigna unguiculata quiescent seeds

Cotyledonary b-galactosidases were isolated and partially purified from Pitiúba cowpea (Vigna unguiculata (L.) Walp.) quiescent seeds. The purification steps consisted of precipitation of the crude extract with ammonium sulphate in the range of 20-60% saturation, acid precipitation, DEAE-Sephadex ion-exchange chromatography and Lactosyl-Sepharose affinity chromatography. This purification process gave rise to three b-galactosidases-rich fractions: b-gal I, b-gal II and b-gal III, which were purified about 5, 509, and 62 fold, respectively. They reached maximal enzyme activity at different pH ranges: 3.5-4.5 for b-gal I, 3.0-3.5 for b-gal II, and 3.0-4.0 for b-gal III. Their maximal activities were reached when the temperature of the assay medium was 60° C, and preincubation of the enzymes at different temperatures has shown that they were heat-stable up to 50° C. There were no significant differences among the partially purified enzymes as far as their response to the different effectors tested, except for Mn2+ and EDTA, which affected differently b-gal I, b-gal II, and b-gal III. They were slightly affected by Mg2+, Ca2+, Zn2+, Co2+, tartarate, molybdate, glucose, and lactose, strongly inhibited by Cu2+ and galactose, and inactivated by Hg2+. These chemical and physical properties are similar to the ones found for other plant b-galactosidases. Although through this process of purification three isoforms of this enzyme were obtained, isoelectric focusing in polyacrylamide slab gel of these enzyme-proteins suggest that cotyledons of Pitiúba cowpea quiescent seeds possess four isoforms of b-galactosidases.

Multiple dormancy and maternal effect on Miconia ferruginata (Melastomataceae) seed germination, Serra de Caldas Novas, Goiás, Brazil

Species with mostly asexual reproduction are interesting subjects for germination studies since variation would be more easily linked to environmental factors. Miconia ferruginata DC. is an apomictic treelet in Brazilian cerrado areas on rocky outcrops. Germination of seeds collected from individuals occurring in the Serra de Caldas Novas State Park, Goiás, was studied in three experiments under controlled conditions. Germination characteristics differed among individuals and were correlated with altitude and soil Al content. Seeds from plants growing at lower altitudes, with lower soil aluminium content, presented malformed seeds with absence of embryo which rendered lower, but better synchronized germination. The nested analysis showed that from the total variance, 78.14% for germinability, 54.56% for uncertainty of the germination process, and 68.30% for the quantity of seeds without embryo was attributed to the altitudinal effect. Individuals nested within altitude contributed up to 16.93% for the total variance. It means that there is low variability among individuals of the same altitude and high variability among individuals from different points of the slope, making clear that for the studied population the environmental effect is stronger than the genetic component to determine the seed quality. The testa of the seeds provides a mechanical dormancy which seems to be associated also with phenolic compounds, which help to disperse germination through time. Photoblastism was also registered for seeds of this species.