Milk intake and the risk of type 2 diabetes mellitus, hypertension and prostate cancer

Milk intake is widely recommended for a healthy diet. Recent evidences suggest that milk/dairy products are associated with a lower risk of type 2 diabetes and hypertension. On the other hand, high calcium intake has been associated with a higher risk of prostate cancer. The calcium and vitamin D content in dairy foods could have beneficial effects on glucose metabolism and renin/angiotensin system as well regulates body weight. The association between high dairy/calcium consumption and prostate cancer risk are related to the presence of estrogens and insulin like growth factor (IGF-I) in milk. Based on the current evidence, it is possible that milk/dairy products, when consumed in adequate amounts and mainly with reduced fat content, has a beneficial effect on the prevention of hypertension and diabetes. Its potential role in the pathogenesis of prostate cancer is not well supported and requires additional study.

Efeito da inclusão de diferentes fontes lipídicas e óleo mineral na dieta sobre a digestibilidade dos nutrientes e os níveis plasmáticos de gordura em equinos

Objetivou-se avaliar os efeitos da inclusão de gordura de origem animal ou vegetal e de óleo mineral sobre a aceitabilidade, a digestibilidade dos nutrientes e as concentrações plasmáticas de triglicérides e colesterol em equinos. Utilizaram-se quatro potros de 13 a 16 meses de idade recebendo dieta contendo feno de gramínea e concentrado, em delineamento quadrado latino, analisado por contrastes ortogonais. A aceitabilidade não foi influenciada pela quantidade nem pelo tipo de óleo adicionado às dietas. Os menores valores de digestibilidade de matéria seca (MS), matéria orgânica (MO) e extrato etéreo (EE) foram observados para as dietas acrescidas de óleo mineral (58,90; 60,29 e 32,02%) em comparação à dieta controle, cujos valores foram de 62,58; 64,41 e 77,72%. O coeficiente de digestibilidade do EE obtido com a dieta com óleo mineral foi menor (32,02%) que o obtido para as dietas com gordura animal (90,26%) e gordura vegetal (86,47%). A dieta com óleo mineral reduziu a concentração de HDL-C (68,75 mg/dL) em relação à dieta controle (76,00 mg/dL). A adição de fontes lipídicas e óleo mineral não influencia na aceitabilidade da dieta por equinos. O óleo vegetal não se diferencia da gordura animal quanto à digestibilidade dos nutrientes, no entanto, essas fontes de lipídios afetam a digestibilidade do extrato etéreo. A adição de óleo mineral reduz os níveis plasmáticos de HDL-C, ao passo que a adição de gordura animal e gordura vegetal não altera as concentrações plasmáticas de colesterol.

Deficiência de vitamina A em pré-escolares da cidade do Recife, Nordeste do Brasil

RESUMO. O objetivo deste estudo foi avaliar a prevalência de deficiência de vitamina A (DVA) em pré-escolares da cidade do Recife, Nordeste Brasileiro. A amostra foi composta por 344 crianças, de 24 a 60 meses, de ambos os sexos, em 18 creches públicas da cidade do Recife, em 2007. O estado nutricional de vitamina A foi avaliado pelos indicadores bioquímico (retinol sérico) e dietético (inquérito de consumo alimentar) e o status pondo-estatural através dos índices antropométricos peso/idade (P/I), altura/idade (A/I) e peso/altura (P/A). A prevalência de níveis de retinol sérico baixos (<0,70μmol/L) foi de 7,7 por cento (IC 95 por cento 4,88 – 11,81), caracterizando a DVA como problema de saúde pública do tipo leve, segundo critérios da Organização Mundial de Saúde. Por outro lado, 29,6 por cento (IC 95 por cento 24,22 – 35,63) das crianças apresentaram níveis aceitáveis ou marginais (0,70 a 1,04μmol/L) de retinol. Em relação ao consumo de vitamina A, os valores abaixo da EAR (Estimated Average Requirement), de 210μg/dia para crianças de 24 a 47 meses e de 275μg/dia para crianças de 48 a 96 meses de idade foi de 8,1 por cento e 21,3 por cento, respectivamente. As prevalências de déficits antropométricos (<-2 escores –Z) nos pré-escolares foram de 2,5 por cento para o indicador P/I, de 8,6 por cento quanto ao A/I e de 1,5 por cento em relação ao P/A. Os dados acima evidenciam a importância da institucionalização para o adequado estado nutricional das crianças e manutenção dos estoques adequados de vitamina A. Todavia, são necessários mais estudos enfocando pré-escolares não institucionalizados, ou seja, crianças que vivem fora do ambiente privilegiado das creches

Effect of glutamate and inosinate on sensory and instrumental texture of extruded products

Expanded products have been developed by extrusion of non-conventional highly nutritious raw materials such as amaranth and chickpea blended with bovine lung. As sensory acceptance of these snacks is restricted, this study aimed at improving their texture, through the addition of monosodium glutamate (MSG) and disodium inosinate (IMP) flavor enhancers to the feeding material, or to the flavor added after the extrusion. Sensory and mechanical analyses showed that both enhancers affected texture, assessed by sensory and instrumental methods. Addition of IMP together with MSG to the chickpea-based snacks presented the best results. This beneficial effect was not observed in the amaranth-based snack, suggesting that IMP and MSG can favorably impact texture of extruded products depending on the amount and type of protein present

Diferenciais de cárie dentária entre os índios Xavante de Mato Grosso, Brasil

O objetivo do estudo foi avaliar níveis de experiência de cárie entre subgrupos Xavante que vivem em diferentes Terras Indígenas (T.I.) no Estado de Mato Grosso, Brasil, a fim de investigar a presença de desigualdades no interior de uma mesma etnia indígena. Os dados foram coletados através de um censo de saúde bucal realizados em 2004. Das sete T.I. Xavante existentes, foram investigadas quatro (Pimentel Barbosa, Sangradouro, Areões e Marechal Rondon), nas quais foram selecionadas a maior aldeia de cada. Foram adotados os critérios preconizados pela Organização Mundial da Saúde, e utilizado o índice CPOS. Para mensurar as diferenças entre as T.I. foi estimada a razão de prevalência (RP) por meio de análise de regressão de Poisson, efetuada na faixa etária entre 6 e 34 anos para cada sexo, incluindo a idade como covariável. Nesta faixa etária, as perdas variaram entre 26 a 30 por cento. Pimentel Barbosa foi considerada como referência para comparações por apresentar menor prevalência de cárie em todas as faixas etárias analisadas. A maior disparidade foi notada entre as T.I. Pimentel Barbosa e Sangradouro, tanto em homens (RP 2,68- IC95 por cento 2,41 a 2,97) como em mulheres (RP 2,03- IC95 por cento 1,85 a 2,23). A RP do componente obturado em Areões e Marechal Rondon (diferença relativa a Pimentel Barbosa) é muito pequena em relação à carga de doença total nestas T.I., indicando menor presença de serviço odontológico restaurador. Conclui-se que a transição em saúde bucal não é homogênea entre os Xavante e que as diferenças podem estar associadas a particularidades do processo histórico de interação com a sociedade não-indígena (Continua) (Continuação) Determinantes locais e regionais, incluindo fatores demográficos, características econômicas e sócio-culturais específicas, acesso e utilização de serviços de saúde, podem ter determinado as desigualdades de ataque de cárie observadas entre os Xavante

Tendências da produção científica em odontologia no Brasil

Objetivo. Descrever a tendência da produção científica odontológica no Brasil, destacando-se a área de saúde bucal coletiva, nos primeiros anos do século XXI. Métodos. Os resumos de trabalhos apresentados nas reuniões da Sociedade Brasileira de Pesquisa Odontológica (SBPqO) de 2001 a 2006 foram avaliados em termos do seu desenho metodológico (estudo agregado ou individuado; estudo observacional ou de intervenção ; estudo transversal ou longitudinal), natureza geral (revisões bibliográficas, estudos com seres humanos ou pesquisas laboratoriais) e enquadramento em uma das 19 especialidades reconhecidas pelo Conselho Federal de Odontologia (CFO). Dos 10406 trabalhos apresentados nesse período, foram lidos 5203 (50,0% do total). Resultados. Quanto ao desenho metodológico, 87,5% dos resumos eram do tipo operativo individuado e 12,5% do tipo agregado. Na classificação da natureza geral da pesquisa, 41,7% dos resumos tratavam de estudos com seres humanos. Os resumos restantes ( 58,3%) tratavam de pesquisas laboratorais in vitro (31,1%), pesquisas laboratoriais in vivo (23,6%) e revisões bibliográficas (3,6%). Com relação às áreas de conhecimento do CFO, apenas cinco atingiram percentuais de ocorrência superiores a 10,0%: dentística, periodontia, endodontia, odontopediatria e saúde coletiva. Conclusões. A produção científica odontológica brasileira no período de 2001 a 2006 foi equilibrada, com crescente interesse na área de saúde bucal coletiva

Saúde bucal e cuidado odontológico: representações sociais de mães usuárias de um serviço público de saúde

Objetivo: identificar as representações sociais de mães de crianças da faixa etária de zero a cinco anos de idade do Núcleo de Saúde da Família IV, em Ribeirão Preto-SP, procurando saber o que pensam sobre saúde bucal e tratamento odontológico. Método: trata-se de pesquisa qualitativa, sendo utilizada a entrevista semi-estruturada para a coleta dos dados e a análise de conteúdo. Resultados: constatou-se grande dificuldade das mães em se expressar a respeito do que é, para elas, saúde. Para essas mães a saúde bucal está relacionada com normas de higiene e dietéticas e também com a ida ao dentista, restringindo-se na preocupação com a estética e pouco com a função. Já em relação ao tratamento odontológico, a grande maioria demonstrou apresentar medo, causado pela sua experiência anterior com o tratamento. A assistência particular está associada à pontualidade e ao atendimento da maneira desejada enquanto o tratamento oferecido pelo setor público à demora e à falta de equipamentos e materiais. A humanização no atendimento e competência do profissional emergiram como dois aspectos importantes, e podem estar determinando a decisão de ir ou não ao dentista. Conclusões: A expressão saúde bucal foi associada à assistência odontológica. O atendimento pelo setor privado foi referido como o que mais se aproxima do tipo ideal de assistência odontológica

Emergence of carbapenem-resistant Escherichia coli producing CMY-2-type AmpC 'beta'-lactamase in Brazil

FAPESP and CNPq

Changes in Glucose and Glutamine Lymphocyte Metabolisms Induced by Type I Interferon alpha

In lymphocytes (LY), the well-documented antiproliferative effects of IFN-alpha are associated with inhibition of protein synthesis, decreased amino acid incorporation, and cell cycle arrest. However, the effects of this cytokine on the metabolism of glucose and glutamine in these cells have not been well investigated. Thus, mesenteric and spleen LY of male Wistar rats were cultured in the presence or absence of IFN-alpha, and the changes on glucose and glutamine metabolisms were investigated. The reduced proliferation of mesenteric LY was accompanied by a reduction in glucose total consumption (35%), aerobic glucose metabolism (55%), maximal activity of glucose-6-phosphate dehydrogenase (49%), citrate synthase activity (34%), total glutamine consumption (30%), aerobic glutamine consumption (20.3%) and glutaminase activity (56%). In LY isolated from spleen, IFN alpha also reduced the proliferation and impaired metabolism. These data demonstrate that in LY, the antiproliferative effects of IFN alpha are associated with a reduction in glucose and glutamine metabolisms.

The burden of physical activity on type 2 diabetes public healthcare expenditures among adults: a retrospective study

Background: Determinants of public healthcare expenditures in type 2 diabetics are not well investigated in developing nations and, therefore, it is not clear if higher physical activity decreases healthcare costs. The purpose of this study was to analyze the relationship between physical activity and the expenditures in public healthcare on type 2 diabetes mellitus treatment. Methods: Cross-sectional study carried out in Brazil. A total of 121 type 2 diabetics attended to in two Basic Healthcare Units were evaluated. Public healthcare expenditures in the last year were estimated using a specific standard table. Also evaluated were: socio-demographic variables; chronological age; exogenous insulin use; smoking habits; fasting glucose test; diabetic neuropathy and anthropometric measures. Habitual physical activity was assessed by questionnaire. Results: Age (r = 0.20; p = 0.023), body mass index (r = 0.33; p = 0.001) and waist-to-hip ratio (r = 0.20; p = 0.025) were positively related to expenditures on medication for the treatment of diseases other than diabetes. Insulin use was associated with increased expenditures. Higher physical activity was associated with lower expenditure, provided medication for treatment of diseases other than diabetes (OR = 0.19; p = 0.007) and medical consultations (OR = 0.26; p = 0.029). Conclusions: Type 2 diabetics with higher enrollment in physical activity presented consistently lower healthcare expenditures for the public healthcare system.

Study of calcium oxalate monohydrate of kidney stones by X-ray diffraction

X-ray powder diffraction was used to study the phase composition of human renal calculi. The stones were collected from 56 donors in Vitoria, Espirito Santo state, southeastern Brazil. An XRD phase quantification revealed that 61% of the studied renal stones were composed exclusively of calcium oxalate [34% formed only by calcium oxalate rnonohydrate (COM) and 27% presents both monohydrate and dihydratate calcium oxalate]. The 39% multi-composed calculi have various other phases such as uric acid and calcium phosphate. Rietveld refinement of XRD data of one apparent monophasic (COM) renal calculus revealed the presence of a small amount of hydroxyapatite. The presence of this second phase and the morphology of the stone (ellipsoidal) indicated that this calculus can be classified as non-papillary type and its nucleation process developed in closed kidney cavities. In order to show some advantages of the X-ray powder diffraction technique, a study of the phase transformation of monohydrate calcium oxalate into calcium carbonate (CaCO(3)) was carried out by annealing of a monophasic COM calculi at 200, 300, and 400 degrees C for 48 h in a N(2) gas atmosphere. The results of the XRD for the heat treated samples is ill good agreement with the thermogravimetric analysis found in the literature and shows that X-ray powder diffraction can be used as a suitable technique to study the composition and phase diagram of renal calculi. (C) 2008 International Centre for Diffraction Data.

Evaluation technique for determining wheel performance in the grinding of aerospace materials

Nickel-based super alloys are used in a variety of applications in which high-temperature strength and resistance to creep, corrosion, and oxidation are required, such as in aircraft gas turbines, combustion chambers, and automotive engine valves. The properties that make these materials suitable for these applications also make them difficult to grind. Grinding systems for such materials are often built around vitrified cBN (cubic boron nitride) wheels to realize maximum productivity and minimum cost per part. Conditions that yield the most economical combination of stock removal rate and wheel wear are key to the successful implementation of the grinding system. Identifying the transition point for excessive wheel wear is important. The aim of this study is to compare the performance of different cBN wheels when grinding difficult-to-grind (DTG) materials by determining the 'wheel wear characteristic curve', which correlates the G-ratio to the calculated tangential force per abrasive grain. With the proposed methodology, a threshold force per grit above which the wheel wear rate increases rapidly can be quickly identified. A comparison of performance for two abrasive product formulations in the grinding of three materials is presented. The obtained results can be applied for the development of grinding applications for DTG materials.

Tool wear aspects when applying high-speed tapping on grey cast iron

Tool wear is a very important subject affecting the economics of machining, especially in tapping, since it is one of the last operations to be performed within most operation sequences. In the present study, some aspects of tapping such as the mechanisms and types of wear were investigated in taps working at conventional and high-speed cutting (HSC). Additionally, different types of coatings and cooling /lubrication conditions were used. The tapping operation (M8 x 1.25) was performed in through holes with two cutting speeds (30 and 60 m/min) in grey cast iron GG25. Lubrication conditions tested were dry and with minimal quantity of lubricant. Tap materials were manufactured by powder metallurgy and coated with (TiAl)N and with TiCN. A go-non-go gauge criterion was used to assess tool life. The wear and surface aspects of the tools and workpiece were evaluated by scanning electron microscopy and energy dissipation spectroscopy. Torque signals were also measured during the tests. The main wear mechanism observed was adhesion, although some abrasion and diffusion may also have occurred, and the main type of wear was flank wear. The adhesion of workpiece material on the tool was the main and decisive factor ending tool life. Tool coatings proved to be an efficient way to minimize adhesion. Torque signals followed the same pattern as the flank wear and no significant change was observed when the cutting speed was increased.

Analysis of the tip roundness effects on the micro- and macroindentation response of elastic-plastic materials

In this work, the effects of indenter tip roundness oil the load-depth indentation curves were analyzed using finite element modeling. The tip roundness level was Studied based on the ratio between tip radius and maximum penetration depth (R/h(max)), which varied from 0.02 to 1. The proportional Curvature constant (C), the exponent of depth during loading (alpha), the initial unloading slope (S), the correction factor (beta), the level of piling-up or sinking-in (h(c)/h(max)), and the ratio h(max)/h(f) are shown to be strongly influenced by the ratio R/h(max). The hardness (H) was found to be independent of R/h(max) in the range studied. The Oliver and Pharr method was successful in following the variation of h(c)/h(max) with the ratio R/h(max) through the variation of S with the ratio R/h(max). However, this work confirmed the differences between the hardness values calculated using the Oliver-Pharr method and those obtained directly from finite element calculations; differences which derive from the error in area calculation that Occurs when given combinations of indented material properties are present. The ratio of plastic work to total work (W(p)/W(t)) was found to be independent of the ratio R/h(max), which demonstrates that the methods for the Calculation of mechanical properties based on the *indentation energy are potentially not Susceptible to errors caused by tip roundness.

Analysis of the effects of conical indentation variables on the indentation response of elastic-plastic materials through factorial design of experiment

In this work, the effects of conical indentation variables on the load-depth indentation curves were analyzed using finite element modeling and dimensional analysis. A factorial design 2(6) was used with the aim of quantifying the effects of the mechanical properties of the indented material and of the indenter geometry. Analysis was based on the input variables Y/E, R/h(max), n, theta, E, and h(max). The dimensional variables E and h(max) were used such that each value of dimensionless Y/E was obtained with two different values of E and each value of dimensionless R/h(max) was obtained with two different h(max) values. A set of dimensionless functions was defined to analyze the effect of the input variables: Pi(1) = P(1)/Eh(2), Pi(2) = h(c)/h, Pi(3) = H/Y, Pi(4) = S/Eh(max), Pi(6) = h(max)/h(f) and Pi(7) = W(P)/W(T). These six functions were found to depend only on the dimensionless variables studied (Y/E, R/h(max), n, theta). Another dimension less function, Pi(5) = beta, was not well defined for most of the dimensionless variables and the only variable that provided a significant effect on beta was theta. However, beta showed a strong dependence on the fraction of the data selected to fit the unloading curve, which means that beta is especially Susceptible to the error in the Calculation of the initial unloading slope.