Average-case analysis of power consumption in embedded systems

Power efficiency is one of the most important constraints in the design of embedded systems since such systems are generally driven by batteries with limited energy budget or restricted power supply. In every embedded system, there are one or more processor cores to run the software and interact with the other hardware components of the system. The power consumption of the processor core(s) has an important impact on the total power dissipated in the system. Hence, the processor power optimization is crucial in satisfying the power consumption constraints, and developing low-power embedded systems. A key aspect of research in processor power optimization and management is “power estimation”. Having a fast and accurate method for processor power estimation at design time helps the designer to explore a large space of design possibilities, to make the optimal choices for developing a power efficient processor. Likewise, understanding the processor power dissipation behaviour of a specific software/application is the key for choosing appropriate algorithms in order to write power efficient software. Simulation-based methods for measuring the processor power achieve very high accuracy, but are available only late in the design process, and are often quite slow. Therefore, the need has arisen for faster, higher-level power prediction methods that allow the system designer to explore many alternatives for developing powerefficient hardware and software. The aim of this thesis is to present fast and high-level power models for the prediction of processor power consumption. Power predictability in this work is achieved in two ways: first, using a design method to develop power predictable circuits; second, analysing the power of the functions in the code which repeat during execution, then building the power model based on average number of repetitions. In the first case, a design method called Asynchronous Charge Sharing Logic (ACSL) is used to implement the Arithmetic Logic Unit (ALU) for the 8051 microcontroller. The ACSL circuits are power predictable due to the independency of their power consumption to the input data. Based on this property, a fast prediction method is presented to estimate the power of ALU by analysing the software program, and extracting the number of ALU-related instructions. This method achieves less than 1% error in power estimation and more than 100 times speedup in comparison to conventional simulation-based methods. In the second case, an average-case processor energy model is developed for the Insertion sort algorithm based on the number of comparisons that take place in the execution of the algorithm. The average number of comparisons is calculated using a high level methodology called MOdular Quantitative Analysis (MOQA). The parameters of the energy model are measured for the LEON3 processor core, but the model is general and can be used for any processor. The model has been validated through the power measurement experiments, and offers high accuracy and orders of magnitude speedup over the simulation-based method.

Comparison of two HVAC renovation solutions : A case study

Within the aging building stock of Europe, there is great potential of saving energy through renovation and upgrading to modern standards, and to thereby approach the internationally set goals of lower energy use. This paper concerns the planned renovation of the building envelope and HVAC systems in a multi-family house in Ludwigsburg, Germany. Five systemic HVAC solutions were compared, with special focus on two systems: A) Balanced ventilation with HRC + Micro heat pump, and B) Forced exhaust ventilation + Heat pump with exhaust air HRC + Ventilation radiators. Given the predicted heating demand and ventilation rate of the house after renovation, the performance of the two systems was compared, alongside three common systems for reference. Calculations were made using TMF Energi, a tool developed by SP Technical Research Institute of Sweden.    Both systems A and B were found to have the lowest electrical energy use together with the ground source heat pump system for the assumed conditions. For other assumptions, including different climate and degree of insulation, some differences between these three systems were noted. Most significant is the increased electrical use of system B for higher heating loads due to limitations in the power available from the heat source, exhaust air, which is dependent on the ventilation rate.

"Not one word of it made any sense" : Hyperbolic Synecdoche in the British National Corpus

A distinct metonymic pattern was discovered in the course of conducting a corpus-based study of figurative uses of WORD. The pattern involved examples such as Not one word of it made any sense and I agree with every word. It was labelled ‘hyperbolic synecdoche’, defined as a case in which a lexeme which typically refers to part of an entity (a) is used to stand for the whole entity and (b) is described with reference to the end point on a scale. Specifically, the speaker/writer selects the perspective of a lower-level unit (such as word for ‘utterance’), which is quantified as NOTHING or ALL, thus forming a subset of ‘extreme case formulations’. Hyperbolic synecdoche was found to exhibit a restricted range of lexicogrammatical patterns involving word, with the negated NOTHING patterns being considerably more common than the ALL patterns. The phenomenon was shown to be common in metonymic uses in general, constituting one-fifth of all cases of metonymy in word. The examples of hyperbolic synecdoche were found not to be covered by the oftquoted ‘abbreviation’ rationale for metonymy; instead, they represent a more roundabout way of expression. It is shown that other cases of hyperbolic synecdoche exist outside of word and the domain of communication (such as ‘time’ and ‘money’).

Throughfall and soil properties in shaded and unshaded coffee plantations and a secondary forest: a case study from Southern Colombia

In Colombia coffee production is facing risks due to an increase in the variability and amount of rainfall, which may alter hydrological cycles and negatively influence yield quality and quantity. Shade trees in coffee plantations, however, are known to produce ecological benefits, such as intercepting rainfall and lowering its velocity, resulting in a reduced net-rainfall and higher water infiltration. In this case study, we measured throughfall and soil hydrological properties in four land use systems in Cauca, Colombia, that differed in stand structural parameters: shaded coffee, unshaded coffee, secondary forest and pasture. We found that throughfall was rather influenced by stand structural characteristics than by rainfall intensity. Lower throughfall was recorded in the shaded coffee compared to the other systems when rain gauges were placed at a distance of 1.0 m to the shade tree. The variability of throughfall was high in the shaded coffee, which was due to different canopy characteristics and irregular arrangements of shade tree species. Shaded coffee and secondary forest resembled each other in soil structural parameters, with an increase in saturated hydraulic conductivity and microporosity, whereas bulk density and macroporosity decreased, compared to the unshaded coffee and pasture. In this context tree-covered systems indicate a stronger resilience towards changing rainfall patterns, especially in mountainous areas where coffee is cultivated.

Pelvic floor muscles training to reduce symptoms and signs of vulvovaginal atrophy : a case study

Objective: Vulvovaginal atrophy (VVA), caused by decreased levels of estrogen, is a common problem in aging women. Main symptoms of VVA are vaginal dryness and dyspareunia. First-line treatment consists of the application of local estrogen therapy (ET) or vaginal moisturizer. In some cases however, symptoms and signs persist despite those interventions. This case study describes a 77-year-old woman with severe VVA symptoms despite use of local ET and the addition of pelvic floor muscle (PFM) training to her treatment. Methods: A patient with stress urinary incontinence and VVA was referred to a randomized clinical trial on PFM training. On pretreatment evaluation while on local ET, she showed VVA symptoms on the ICIQ Vaginal Symptoms questionnaire and the ICIQ-Female Sexual Matters associated with lower urinary tract Symptoms questionnaire, and also showed VVA signs during the physical and dynamometric evaluation of the PFM. She was treated with a 12-week PFM training program. Results: The patient reported a reduction in vaginal dryness and dyspareunia symptoms, as well as a better quality of sexual life after 12 weeks of PFM training. On posttreatment physical evaluation, the PFMs' tone and elasticity were improved, although some other VVA signs remained unchanged. Conclusions: Pelvic floor muscle training may improve some VVA symptoms and signs in women taking local ET. Further study is needed to investigate and confirm the present case findings and to explore mechanisms of action of this intervention for VVA.

Factores asociados al desplazamiento activo en bicicleta al colegio en el Distrito Bogotá, Colombia. Estudio FUPRECOL

Introducción: El transporte activo (TA) puede ser una oportunidad para incrementar los niveles de actividad física diarios de los niños y adolescentes, además de destacarse como una estrategia práctica, accesible y sostenible a largo plazo. Objetivos: El objetivo del presente estudio es doble: Analizar los patrones de desplazamiento activo en bicicleta al y desde el centro educativo, y b) Identificar los factores asociados al uso de la bicicleta como TA; en una muestra de niños y jóvenes pertenecientes a escuelas oficiales de Bogotá, Colombia. Material y métodos: Se trata de un sub-análisis del estudio FUPRECOL en 8060 niños y adolescentes entre los 9-17 años de edad). El modo de desplazamiento del escolar fue determinado a través de la pregunta: “¿Durante los últimos 7 días, usaste bicicleta para ir al colegio/escuela y volver a la casa?. Dicha respuesta se categorizó en activos “Si” (si se desplazan en bicicleta) y pasivos “No” (si se desplazan en vehículo motorizado). Se midieron parámetros antropométricos de peso, talla y perímetro de cintura. El máximo nivel de estudios alcanzados por la madre/padre (no reporta, primaria o secundaria/técnico o tecnólogo/universitario o postgrado) y la composición del hogar (vive con padre/vive con madre/con ambos padres/con abuelos/otros familiares) se auto-reportó por los padres. Las relaciones entre el TA y los factores anteriormente descritos se analizaron mediante regresión logística binaria. Resultados: El 21,9% del total de la muestra reporta usar la bicicleta como medio de transporte y el 7,9% acumula más de 120 minutos al día. Se observó una mayor probabilidad de usar la bicicleta como medio de desplazamiento activo a la escuela en los varones, en los jóvenes entre 9 y 12 años, y en aquellos cuyo padre/madre reportaron mayor grado académico, es decir, “universitario/postgrado”. 3 Conclusión: Los hallazgos del presente estudio sugieren que es necesario promover el TA desde la niñez, poniendo mayor énfasis en el paso a la adolescencia y en las jóvenes, para así aumentar los niveles diarios de AF de estos.

NEW DATA ON THE CHRONOLOGY OF THE VALE DO FORNO SEDIMENTARY SEQUENCE (LOWER TAGUS RIVER TERRACE STAIRCASE) AND ITS RELEVANCE AS FLUVIAL ARCHIVE OF THE MIDDLE PLEISTOCENE IN WESTERN IBERIA

NEW DATA ON THE CHRONOLOGY OF THE VALE DO FORNO SEDIMENTARY SEQUENCE (LOWER TAGUS RIVER TERRACE STAIRCASE) AND ITS RELEVANCE AS FLUVIAL ARCHIVE OF THE MIDDLE PLEISTOCENE IN WESTERN IBERIA Pedro P. Cunha 1, António A. Martins 2, Jan-Pieter Buylaert 3,4, Andrew S. Murray 4, Luis Raposo 5, Paolo Mozzi 6, Martin Stokes 7 1 MARE - Marine and Environmental Sciences Centre, Department of Earth Sciences, University of Coimbra, Portugal: pcunha@dct.uc.pt 2 MARE - Marine and Environmental Sciences Centre, Dep. Geociências, University of Évora, Portugal; aam@uevora.pt 3 Centre for Nuclear Technologies, Technical University of Denmark, Risø Campus, Denmark; jabu@dtu.dk 4 Nordic Laboratory for Luminescence Dating, Aarhus University, Risø DTU, Denmark; anmu@dtu.dk 5 Museu Nacional de Arqueologia, Lisboa, Portugal; 3raposos@sapo.pt 6 Department of Geosciences, University of Padova, Italy; paolo.mozzi@unipd.it 7 School of Geography, Earth and Environmental Sciences, University of Plymouth, UK; m.stokes@plymouth.ac.uk The stratigraphic units that record the evolution of the Tagus River in Portugal (study area between Vila Velha de Ródão and Porto Alto villages; Fig. 1) have different sedimentary characteristics and lithic industries (Cunha et al., 2012): - a culminant sedimentary unit (the ancestral Tagus, before the drainage network entrenchment) – SLD13 (+142 to 262 m above river bed – a.r.b.; with probable age ca. 3,6 to 1,8 Ma), without artefacts; - T1 terrace (+84 to 180 m; ca. 1000? to 900 ka), without artefacts; - T2 terrace (+57 to 150 m; top deposits with a probable age ca. 600 ka), without artefacts; - T3 terrace (+43 to 113 m; ca. 460 to 360? ka), without artefacts; - T4 terrace (+26 to 55 m; ca. 335 a 155 ka), Lower Paleolithic (Acheulian) at basal and middle levels but early Middle Paleolithic at top levels; - T5 terrace (+5 to 34 m; 135 to 73 ka), Middle Paleolithic (Mousterian; Levallois technique); - T6 terrace (+3 to 14 m; 62 to 32 ka), late Middle Paleolithic (late Mousterian); - Carregueira Sands (aeolian sands) and colluvium (+3 a ca. 100 m; 32 to 12 ka), Upper Paleolithic to Epipaleolithic; - alluvial plain (+0 to 8 m; ca. 12 ka to present), Mesolithic and more recent industries. The differences in elevation (a.r.b.) of the several terrace staircases results from differential uplift due to active faults. Longitudinal correlation with the terrace levels indicates that a graded profile ca. 200 km long was achieved during terrace formation periods and a strong control by sea base level was determinant for terrace formation. The Neogene sedimentary units constituted the main source of sediments for the fluvial terraces (Fig. 2). Geomorphological mapping, coupled with lithostratigraphy, sedimentology and luminescence dating (quartz-OSL and K-feldspar post-IRIR290) were used in this study focused on the T4 terrace, which comprises a Lower Gravels (LG) unit and an Upper Sand (US) unit. The thick, coarse and dominantly massive gravels of the LG unit indicate deposition by a coarse bed-load braided river, with strong sediment supply, high gradient and fluvial competence, during conditions of rapidly rising sea level. Luminescence dating only provided minimum ages but it is probable that the LG unit corresponds to the earlier part of the MIS9 (ca. 335 to 325 ka), immediately postdating the incision promoted by the very low sea level (reaching ca. -140 m) during MIS10 (362 to 337 ka), a period of relatively cold climate conditions with weak vegetation cover on slopes and low sea level. Fig. 1. Main Portuguese reaches in which the Tagus River can be divided (Lower Tagus Basin): I – from the Spanish border to Arneiro (a general E–W trend, mainly consisting of polygonal segments); II – from Arneiro to Gavião (NE–SW); III – from Gavião to Arripiado (E–W); IV – from Arripiado to Vila Franca de Xira (NNE-SSW); V – from Vila Franca de Xira to the Atlantic shoreline. The faults considered to be the limit of the referred fluvial sectors are: F1 – Ponsul-Arneiro fault (WSW-ENE); F2 – Gavião fault (NW-SE); F3 – Ortiga fault (NW-SE); F4 – Vila Nova da Barquinha fault (W-E); F5 – Arripiado-Chamusca fault (NNE-SSW). 1 – estuary; 2 – terraces; 3 – faults; 4 – Tagus main channel. The main Iberian drainage basins are also represented (inset). The lower and middle parts of the US unit, comprising an alternation of clayish silts with paleosols and minor sands to the east (flood-plain deposits) and sand deposits to the west (channel belt), have a probable age of ca. 325 to 200 ka. This points to formation during MIS9 to MIS7, under conditions of high to medium sea levels and warm to mild conditions. The upper part of the US unit, dominated by sand facies and with OSL ages of ca. 200 to 154 ka, correlates with the early part of the MIS6. During this period, progradation resulted from climate deterioration and relative depletion of vegetation that promoted enhanced sediment production in the catchment, coupled with initiation of sea-level lowering that increased the longitudinal slope. The Vale do Forno and Vale da Atela archaeological sites (Alpiarça, central Portugal) document the earliest human occupation in the Lower Tagus River, well established in geomorphological and environmental terms, within the Middle Pleistocene. The Lower Palaeolithic sites were found on the T4 terrace (+26 m, a.r.b.). The oldest artefacts previously found in the LG unit, display crude bifacial forms that can be attributed to the Acheulian, with a probable age of ca. 335 to 325 ka. The T4 US unit has archaeological sites stratigraphically documenting successive phases of an evolved Acheulian, that probably date ca. 325 to 300 ka. Notably, these Lower Palaeolithic artisans were able to produce tools with different sophistication levels, simply by applying different strategies: more elaborated reduction sequences in case of bifaces and simple reduction sequences to obtain cleavers. Fig. 2. . Simplified geologic map of the Lower Tagus Cenozoic basin, adapted from the Carta Geológica de Portugal, 1/500000, 1992). The study area (comprising the Vale do Forno and Vale de Atela sites) is located on the more upstream sector of the Lower Tagus River reach IV, between Arripiado and Chamusca villages. 1 – alluvium (Holocene); 2 – terraces (Pleistocene); 3 – sands, silts and gravels (Paleogene to Pliocene); 4 – Sintra Massif (Cretaceous); 5 – limestones, marls, silts and sandstones (Mesozoic); 6 – quartzites (Ordovician); 7 – basement (Proterozoic to Palaeozoic); 8 – main fault. The main Portuguese reaches of the Tagus River are identified (I to V). The VF3 site (Milharós), containing a Final Acheulian industry, with fine and elaborated bifaces) found in a stratigraphic level located between the T4 terrace deposits and a colluvium associated with Late Pleistocene aeolian sands (32 to 12 ka), has an age younger than ca. 154 ka but much older than 32 ka. In the study area, the sedimentary units of the T4 terrace seem to record the river response to sea-level changes and climatically-driven fluctuations in sediment supply. REFERENCES Cunha P. P., Almeida N. A. C., Aubry T., Martins A. A., Murray A. S., Buylaert J.-P., Sohbati R., Raposo L., Rocha L., 2012, Records of human occupation from Pleistocene river terrace and aeolian sediments in the Arneiro depression (Lower Tejo River, central eastern Portugal). Geomorphology, vol. 165-166, pp. 78-90.

Heterozygosity decrease in wild boar mating system. A case of outbreeding avoidance?

In sexually reproducing organisms, the specific combinations of parental alleles can have important consequences on offspring viability and fitness. Accordingly, genetic relationship between mates can be used as a criterion for mate choice. Here, we used microsatellite genetic markers to estimate the genetic relationship between mating pairs in the wild boar, Sus scrofa. Males, females and foetuses proceeding from Portugal, Spain and Hungary were genotyped using 14 microsatellite markers. The genetic relationship between mates was estimated using different measures of foetus heterozygosity. We found that the observed heterozygosity of foetuses was lower than that expected under random mating. This result occurred mainly when Sd2 (relatedness of parental genomes) was used as the heterozygosity measure. After simulations, we concluded that the observed low heterozygosity was possibly due to outbreeding avoidance. Outbreeding avoidance based on genetically different genomes might play an important role in species evolution and its genetic conservation.

Emergy analysis of a silvo-pastoral system, a case study in southern Portugal

The Mediterranean silvo-pastoral system known as Montado, in Portugal, is a complex land use system composed of an open tree stratum in various densities and an herbaceous layer, used for livestock grazing. Livestock also profit from the acorns, and the grazing contributes to avoid shrub encroachment. In the last 20 years, subsidies from the European Union have greatly promoted cattle rearing in this system and the introduction of heavy breeds, at the expense of sheep, goats or the native cattle breeds. The balance of the traditional system is thus threatened, and a precise assessment of the balance between the different components of the system, therefore is highly needed. The goal of this study was to gain a better under- standing of a Montado farm system with cattle rearing as the major economic activity by applying the emergy evaluation method to calculate indices of yield, investment, environmental loading and sustainability. By integrating different ecosystem components, the emergy evaluation method allows a comprehensive evaluation of this complex and multifunctional system at the scale of an individual farm. This method provides a set of indices that can help us understand the system and design management strategies that maximize emergy flow in the farm. In this paper, we apply the emergy evaluation method to a Montado farm with cattle rearing, as a way to gain a better understanding of this system at the farm scale. The value for the transformity of veal (2.66E?06 sej J-1) is slightly higher, when compared to other systems producing protein. That means that the investment of nature and man in this product was higher and it requires a premium price on the market. The renewa- bility for Holm Oaks Farm (49 %), lower than for other similar systems, supports the assumption that this is a farm in which, comparing with others, the number of purchased inputs in relation to renewable inputs provided by nature, is higher. The Emergy Investment Ratio is 0.91 for cattle rearing compared to a value of 0.49 for cork and 0.43 for firewood harvesting, making it clear that cattle rearing is a more labor demanding activity comparing with extractive activities as cork and firewood harvesting.

Victorian letter writing and its representation in literature and painting: the case study of love letters

One of the main features of nineteenth-century fiction is the quasi-total disappearance of the epistolary novel that had had its heydays in the previous century. For this reason, some scholars have declared the “death” of the letter in literature after the transitional romantic period. However, Victorian novels overflow with letters that are embedded, quoted in part or described and commented on by narrators or characters. Even when its content is not revealed to the reader, the letter becomes a signifier loaded with meanings, also and particularly so, when it is burnt, torn, hidden, found or buried. The Postal Reform of 1839-40 caused the number of letters sent every year in Britain to grow from 75 to 410 million in only 14 years, and the mediatic campaign that supported it drew the attention of the population to the material aspects concerning this means of communication. Newspapers became more affordable too and they promoted a taste for sensationalism that often involved the “spectacularization” of private correspondence. Starting from an excursus on the history of the letter aimed at identifying the key aspects of the genre, this work deals with some real love correspondences from people belonging to different classes in the period from 1840 to the 1870s, to then analyse their fictional and pictorial counterparts. The general picture that emerges from this analysis is that of a Victorian society where letters were able to break down the boundaries between high and low forms of cultural expressions and where, more than ever, letters were present in people’s everyday lives as well as in the art and literature they enjoyed.

Nature-based solutions for urban heat island effect mitigation: the case study of Isla, Malta

Global population growth reflects how humans increasingly exploited Earth's resources. Urbanization develops along with anthropization. It is estimated that nearly 60% of the world's population lives in urban areas, which symbolize the denaturalized dimension of current modernity. Cities are artificial ecosystems that suffer most from environmental issues and climate change. The Urban Heat Island (UHI) effect is a common microclimatic phenomenon affecting cities, which causes considerable differences between urban and rural areas temperatures. Among the driving factors, the lack of vegetation in urban settlements can damage both humans and the environment (health diseases, heat waves caused deaths, biodiversity loss, and so on). As the world continues to urbanize, sustainable development increasingly depends on successful management of urban areas. To enhance cities’ resilience, Nature-based Solutions (NbSs), are defined as an umbrella concept that encompasses a wide range of ecosystem-based approaches and actions to climate change adaptation (CCA) and disaster risk reduction (DRR). This paper analyzes a 15-days study on air temperature trends carried out in Isla, a small locality in the Maltese archipelago, and proposes Nature-based Solutions-characterized scenarios to mitigate the Urban Heat Island effect the Mediterranean city is affected by. The results demonstrates how in some areas where vegetation is present, lower temperatures are recorded than in areas where vegetation is absent or scarce. It also appeared that in one location, the specific type of vegetation does not contribute to high temperature mitigation, whereas in another one, different environmental parameters can influence the measurements. Among the case-specific Nature-based Solutions proposed there are vertical greening (green wall, façades, ground based greening, etc.), tree lines, green canopy, and green roofs.

Malignant Transformation Of An Odontogenic Cyst In A Period Of 10 Years.

Primary intraosseous carcinoma of the jaws (PIOSCC) might arise from odontogenic epithelium, more commonly from a previous odontogenic cyst. The aim of this case is to illustrate that the clinician should consider that an apparent benign dentigerous cyst can suffer malignant transformation and that all material removed from a patient must be evaluated histologically. A 44-year-old man presented in a routine periapical X-ray an impacted lower left third molar with radiolucency over its crown. Ten years later, the patient complained of pain in the same region and the tooth was extracted. After one month, the patient still complained of pain and suffered a fracture of the mandible. A biopsy was performed and carcinoma was diagnosed. The patient was treated surgically with adjuvant radio- and chemotherapy and after 8 years, he is well without signs of recurrences. This report describes a central mandibular carcinoma probably developed from a previous dentigerous cyst.

Structural Connectivity Of The Default Mode Network And Cognition In Alzheimer׳s Disease.

Disconnectivity between the Default Mode Network (DMN) nodes can cause clinical symptoms and cognitive deficits in Alzheimer׳s disease (AD). We aimed to examine the structural connectivity between DMN nodes, to verify the extent in which white matter disconnection affects cognitive performance. MRI data of 76 subjects (25 mild AD, 21 amnestic Mild Cognitive Impairment subjects and 30 controls) were acquired on a 3.0T scanner. ExploreDTI software (fractional Anisotropy threshold=0.25 and the angular threshold=60°) calculated axial, radial, and mean diffusivities, fractional anisotropy and streamline count. AD patients showed lower fractional anisotropy (P=0.01) and streamline count (P=0.029), and higher radial diffusivity (P=0.014) than controls in the cingulum. After correction for white matter atrophy, only fractional anisotropy and radial diffusivity remained significantly lower in AD compared to controls (P=0.003 and P=0.05). In the parahippocampal bundle, AD patients had lower mean and radial diffusivities (P=0.048 and P=0.013) compared to controls, from which only radial diffusivity survived for white matter adjustment (P=0.05). Regression models revealed that cognitive performance is also accounted for by white matter microstructural values. Structural connectivity within the DMN is important to the execution of high-complexity tasks, probably due to its relevant role in the integration of the network.

Multiple Desmoid Tumors In A Patient With Gardner's Syndrome - Report Of A Case.

Desmoid tumor (DT) is a common manifestation of Gardner's Syndrome (GS), although it is a rare condition in the general population. DT in patients with GS is usually located in the abdominal wall and/or intra-abdominal cavity. We report a case of a 32 years-old female patient with familial adenomatous polyposis (FAP), who was already submitted to total colectomy and developed multiple DT, located in the abdominal wall and in the left breast. The patient underwent several surgical procedures, with a multidisciplinary team of surgeons. Wide surgical resections of the left breast and the abdominal wall tumors were performed in separate steps. Polypropylene mesh reconstruction and muscle flaps were needed to cover the defects of the thoracic and abdominal walls. After partial necrosis of the adipose-cutaneous flap in the abdomen that required a new skin graft, she had a satisfactory outcome with complete healing of the surgical incisions. DT is frequent in GS, however, breast localization is very rare, with few cases reported in the literature. Recurrence of DT is not negligible, even after a wide surgical resection. GS patients must be followed up closely, and clinical examination, associated with imaging studies, should be performed to detect any signs of tumor. DT represents one of the most significant causes of the morbidity and mortality that affects FAP patients following colectomy. In general, the surgical procedures to excise DT are highly complex, requiring a multidisciplinary team.