Binary group III-nitride based heterostructures: band offsets and transport properties

In the last few years, there has been remarkable progress in the development of group III-nitride based materials because of their potential application in fabricating various optoelectronic devices such as light emitting diodes, laser diodes, tandem solar cells and field effect transistors. In order to realize these devices, growth of device quality heterostructures are required. One of the most interesting properties of a semiconductor heterostructure interface is its Schottky barrier height, which is a measure of the mismatch of the energy levels for the majority carriers across the heterojunction interface. Recently, the growth of non-polar III-nitrides has been an important subject due to its potential improvement on the efficiency of III-nitride-based opto-electronic devices. It is well known that the c-axis oriented optoelectronic devices are strongly affected by the intrinsic spontaneous and piezoelectric polarization fields, which results in the low electron-hole recombination efficiency. One of the useful approaches for eliminating the piezoelectric polarization effects is to fabricate nitride-based devices along non-polar and semi-polar directions. Heterostructures grown on these orientations are receiving a lot of focus due to enhanced behaviour. In the present review article discussion has been carried out on the growth of III-nitride binary alloys and properties of GaN/Si, InN/Si, polar InN/GaN, and nonpolar InN/GaN heterostructures followed by studies on band offsets of III-nitride semiconductor heterostructures using the x-ray photoelectron spectroscopy technique. Current transport mechanisms of these heterostructures are also discussed.

Rapid synthesis of hybrids and hollow PdO nanostructures by controlled in situ dissolution of a ZnO nanorod template: insights into the formation mechanism and thermal stability

Hollow nanomaterials have attracted a lot of interest by virtue of their wide range of applications that arise primarily due to their unique architecture. A common strategy to synthesize hollow nanomaterials is by nucleation of the shell material over a preformed core and subsequent dissolution of the core in the second step. Herein an ultrafast, microwave route has been demonstrated, to synthesize PdO nanotubes in a single step using ZnO as a sacrificial template. The mechanism of the nanotube formation has been investigated in detail using control experiments. By tuning the starting ratio of PdCl2 : ZnO, hollow to hybrid PdO nanostructures could be obtained using the same method. Conversion of the PdO to Pd nanotubes has been shown by simple NaBH4 treatment. The thermal stability of the PdO nanotubes has been studied. The insights presented here are general and applicable for the synthesis of hybrids/hollow structures in other systems as well.

An exact solution for the three-phase piezoelectric cylinder model under antiplane shear and its applications to piezoelectric composites

A three-phase piezoelectric cylinder model is proposed and an exact solution is obtained for the model under a farfield antiplane mechanical load and a far-field inplane electrical load. The three-phase model can serve as a fiber/interphase layer/matrix model, in terms of which a lot of interesting mechanical and electrical coupling phenomena induced by the interphase layer are revealed. It is found that much more serious stress and electrical field concentrations occur in the model with the interphase layer than those without any interphase layer. The three-phase model can also serve as a fiber/matrix/composite model, in terms of which a generalized self-consistent approach is developed for predicting the effective electroelastic moduli of piezoelectric composites. Numerical examples are given and discussed in detail.

Simulation-based optimal sensor scheduling with application to observer trajectory planning

The sensor scheduling problem can be formulated as a controlled hidden Markov model and this paper solves the problem when the state, observation and action spaces are continuous. This general case is important as it is the natural framework for many applications. The aim is to minimise the variance of the estimation error of the hidden state w.r.t. the action sequence. We present a novel simulation-based method that uses a stochastic gradient algorithm to find optimal actions. © 2007 Elsevier Ltd. All rights reserved.

The art of human rights : enriching the life of the law school through drawings and other visual resource

In the life of the Law School, focus on the “visual” can operate at three different levels: learning, teaching, and examining (legal concepts). My main interest in this paper is to explore the latter level, “examining”, broadly considered so as to encompass evaluation in general. Furthermore, that interest is pinned down here to the area of constitutional rights and human rights in general, even though the conclusions reached can (and should) likely be extrapolated to other areas of the law... In effect, the first logical step regarding the relevance of the visual approach has to do with using it yourself when you study —assuming that you came to the conclusion that you are a “visual learner”. As you know, VARK theorists propose a quadripartite classification of learners. The acronym VARK stands for Visual, Aural, Read/write, and Kinesthetic sensory modalities that are used for learning information. This model was designed in the late 80s by Neil Fleming and it has received some acceptance and a lot of attention...

Competitive adsorption between bovine serum albumin and collagen observed by atomic force microscope

Atomic force microscopy (AFM) was used to study the competitive adsorption between bovine serum albumin (BSA) and type I collagen on hydrophilic and hydrophobic silicon wafers. BSA showed a grain shape and the type I collagen displayed fibril-like molecules with relatively homogeneous height and width, characterized with clear twisting (helical formation). These AFM images illustrated that quite a lot of type I collagen appeared in the adsorption layer on hydrophilic surface in a competitive adsorption state, but the adsorption of BSA was more preponderant than that of type I collagen on hydrophobic silicon wafer surface. The experiments showed that the influence of BSA on type I collagen adsorption on hydrophilic surface was less than that on hydrophobic surface.

Enhanced cycling performance and high energy density of LiFePO4 based lithium ion batteries

LiFePO4 attracts a lot of attention as cathode materials for the next generation of lithium ion batteries. However, LiFePO4 has a poor rate capability attributed to low electronic conductivity and low density. There is seldom data reported on lithium ion batteries with LiFePO4 as cathode and graphite as anode. According to our experimental results, the capacity fading on cycling is surprisingly negligible at 1664 cycles for the cell type 042040. It delivers a capacity of 1170 mAh for 18650 cell type at 4.5C discharge rate. It is confirmed that lithium ion batteries with LiFePO4 as cathode are suitable for electric vehicle application. (c) 2007 Elsevier B.V. All rights reserved.

Query-by-Example Spoken Term Detection ALBAYZIN 2012 evaluation: overview, systems, results, and discussion

Query-by-Example Spoken Term Detection (QbE STD) aims at retrieving data from a speech data repository given an acoustic query containing the term of interest as input. Nowadays, it has been receiving much interest due to the high volume of information stored in audio or audiovisual format. QbE STD differs from automatic speech recognition (ASR) and keyword spotting (KWS)/spoken term detection (STD) since ASR is interested in all the terms/words that appear in the speech signal and KWS/STD relies on a textual transcription of the search term to retrieve the speech data. This paper presents the systems submitted to the ALBAYZIN 2012 QbE STD evaluation held as a part of ALBAYZIN 2012 evaluation campaign within the context of the IberSPEECH 2012 Conference(a). The evaluation consists of retrieving the speech files that contain the input queries, indicating their start and end timestamps within the appropriate speech file. Evaluation is conducted on a Spanish spontaneous speech database containing a set of talks from MAVIR workshops(b), which amount at about 7 h of speech in total. We present the database metric systems submitted along with all results and some discussion. Four different research groups took part in the evaluation. Evaluation results show the difficulty of this task and the limited performance indicates there is still a lot of room for improvement. The best result is achieved by a dynamic time warping-based search over Gaussian posteriorgrams/posterior phoneme probabilities. This paper also compares the systems aiming at establishing the best technique dealing with that difficult task and looking for defining promising directions for this relatively novel task.

Fishery management plans and the development of artisanal fisheries in Nigeria: a review

Management of natural resources all over the world is of paramount importance to their sustainability in developing countries like Nigeria, there is less emphasis on proper management especially of fishery and other aquatic resources due to lack of sensitization and enlightenment of the rural dwellers who are closer to such natural resources. The main thrust of this review is to examine the management plans for Nigerian freshwater bodies (rivers and lakes) and the impact of such plans on the artisanal fisheries development in Nigeria. From the on-shelf information gathered there is scarcity of information on the management of Nigerian freshwater body's information available indicates that there is the traditional fisheries management and the government legal approach in form of fisheries Laws and Regulations. However, these management techniques are poorly carried out since there is a poor follow-up. Appreciable impact of fisheries management introduced on Kanji Lake by the Nigerian-German Kanji Lake Fisheries Promotion Project (NGKLFPP) between 1993 and 2001 proves worthwhile as this introduced some management measures such as implementation of fisheries Laws and Regulations, the ban of obnoxious fishing methods, introduction of fishing license, constitution of a management unit and appointment of liaison fishermen. Within the operative years of the project a lot of success was achieved and it is recommended that the approach in Kainji should be replicated in other freshwater bodies in Nigeria to alleviate poverty in the rural poor fishing communities

Hatchery construction and its feasibility in the Nigerian economy

Aquaculture drive in the Niger Delta has necessitated the springing up of various forms of hatcheries in Nigeria in the area. The hatchery level is high as most fish farmers now want to produce their own fingerlings for the stocking of their production ponds for culture to market (table) size. The paper shows that there is a lot of market in the Niger-Delta for fresh fish. Majority of the numerous fish farmers are not well empowered to breed and produce fish seeds especially species most loved and eaten. The rising cost of materials in the Nigerian economy has become a bottleneck in the construction of more fish hatcheries for fingerling production. However, the assistance of multinationals has become very necessary to enhance its feasibility to encourage better involvement in the fish hatchery works. One remarkable area where assistance is being felt by the communities in the Niger-Delta is in fish farming and more so in the supply of fish fingerling to top fish farmers by The Shell Petroleum Development Company of Nigeria Limited (SPDC), a multinational oil company in the area. Few fish farmers have benefited from this. If more hatcheries are available to service and provide the needed fingerlings to stock the available water bodies such as, home backyard ponds, the 0.74 million hectares of brackish water, 1.01 million hectares of perennial swamps, and other marginal land available for aquaculture and properly managed, it will yield between 2.5 and 10 metric tones of fish depending on the species stocked and bred