Caracterização da matéria-prima cerâmica da Mina Tabajara (Limeira, SP)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos do treinamento resistido sobre variáveis relacionadas com a baixa densidade óssea de mulheres menopausadas tratadas com alendronato

A osteoporose é uma doença crônica que atinge o esqueleto humano. OBJETIVO: Verificar os efeitos do treinamento resistido sobre a densidade mineral óssea (DMO), força muscular, equilíbrio e qualidade de vida em mulheres menopausadas em tratamento com alendronato. MÉTODOS: Participaram do estudo 16 voluntárias. Elas foram separadas em dois grupos: que praticaram o treino resistido (n = 9, 49,7 ± 4,2 idade) e que constituíram o grupo controle (n = 7, 53,8 ± 4,4 idade). Os instrumentos de avaliação seguintes foram usados: a absorciometria de dupla energia por raios X -DXA (que mediu a coluna lombar L2-L4, colo do fêmur, triângulo de Wards e trocanter maior), o Osteoporosis Assessment Questionnaire (OPAQ) e um teste de equilíbrio. O treinamento foi periodizado em 12 meses, divididos em seis ciclos com intensidade de 70-90% da carga máxima (10RM). Testes paramétricos (t ou Wilcoxon), para análise intragrupo e (Anova) para intergrupos, foram usados. RESULTADOS: Foram encontradas diferenças significativas favoráveis ao grupo que treinou nos sítios da lombar L2-L4 (6,8%, p = 0,001), colo do fêmur (4,8%, p = 0,005) e trocanter (0,76%, p = 0,005). Além de diferenças significativas também para o equilíbrio corporal (21,4%, p = 0,001), qualidade de vida (9,1%, p = 0,001) e todas as medidas de força como na pressão de pernas 45° (49,3%, p < 0,001). CONCLUSÃO: Os resultados sugerem que a metodologia aplicada ao treino resistido pode ser recomendada a mulheres menopausadas com baixa DMO.

Distribuição volumétrica e espectro de gotas de bicos hidráulicos de jato plano de faixa expandida XR11003

O presente trabalho teve por objetivos avaliar o espectro de gotas e os perfis de distribuição volumétrica de um bico hidráulico de jato plano de faixa expandida, modelo XR11003. Utilizou-se de analisador de partículas a laser para avaliar o espectro de gotas e de mesa de deposição para análise da distribuição volumétrica. O ensaio do espectro de gotas foi em delineamento inteiramente casualizado, em esquema fatorial 2 x 2 x 3, com três repetições, em que o primeiro fator representa o líquido pulverizado (L1 = água e L2 = água + 0,1% de espalhante adesivo não-iônico), o segundo representa a pressão de pulverização (P1 = 200 kPa e P2 = 400 kPa) e o terceiro representa três bicos hidráulicos XR11003 de jato plano (B1, B2 e B3). No ensaio de distribuição volumétrica, o delineamento foi o inteiramente casualizado, em esquema fatorial com dois fatores, não se avaliando o fator bico. Dos resultados do espectro de gotas, observaram-se maior tamanho de gotas para a pressão de 200 kPa e menor amplitude relativa quando se utilizou 0,1% de adjuvante. Para os perfis de distribuição volumétrica, ocorreu aumento na faixa de deposição e no espaçamento entre bicos com C.V. de 10%, com a adição de 0,1% de adjuvante e aumento na pressão.

Reatores anaeróbios operados em batelada sequencial, seguidos de lagoas de polimento, para o tratamento de águas residuárias de suinocultura. Parte I: produção de metano e remoção de DQO e de sólidos suspensos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Formação de populações-bases de aves para corte. I. Avaliação de melhoramento genético disponível no mercado

The present work aimed at studying the effect of five doses of zinc (0, 1.0, 2.0, 3.0 and 4.0 ppm) in three levels of soil correction. A Dark-Red Latosol, clay texture, oryginally recovered by cerrado vegetation was used. Soybean was used as test plant, cultivated in green-house conditions. The zinc dose affected dry matter production of aerial parts and grain only in the treatments that received the corrective. The concentration of the element in the soil increased linearly with the dose application, and the critical levels in soil (90% of the maximal yield) were between 0.27 and 0.37 ppm of zinc in the treatments with the equivalent to 2.0 t/ha and 3.2 t/ha of lime, respectively.

Localized mechanics of dentin self-etching adhesive system

The bond strength of composite resins (CRs) to dentin is influenced by the interfacial microstructure of the hybrid layer (HL) and the resin tags (TAG). The contemporary self-etching primer adhesive systems overcame the inconvenient of the etch-and-rinse protocol. Studies, however, have demonstrated that HL thickness and TAG length vary according to the wetting time and additional use of acid-etching prior to self-etching primers. This study investigated the localized stress distribution in the HL and the dentin/adhesive interface. Two HL thicknesses (3 or 6 mu m), two TAG lengths (13 or 17 mu m) and two loading conditions (perpendicular and oblique-25 degrees) were investigated by the finite element (FE) analysis. Five two-dimensional FE models (M) of a dentin specimen restored with CR (38 x 64 mu m) were constructed: M1 - no HL and no TAG; M2 - 3 mu m of HL and 13 mu m of TAG; M3 - 3 mu m of HL and 17 mu m of TAG; M4 - 6 mu m of HL and 13 mu m of TAG; and M5 - 6 mu m of HL and 17 mu m of TAG. Two distributed loadings (L) (20N) were applied on CR surface: L1 - perpendicular, and L2 - oblique (25 degrees). Fixed interfacial conditions were assigned on the border of the dentin specimen. Ansys 10.0 (Ansys (R), Houston, PA, USA) software was used to calculate the stress fields. The peak of von Mises (sigma(vM)) and maximum principal stress (sigma(max)) was higher in L2 than in L1. Microstructures (HL and TAG) had no effect on local stresses for L1. Decreasing HL decreased sigma(vM) and sigma(max) in all structures for L2, but the TAG length had influence only on the peributular dentin. The thickness of HL had more influence on the sigma(vM) and sigma(max) than TAG length. The peritubular dentin and its adjacent structures showed the highest sigma(vM) and sigma(max), mainly in the oblique loading.

Anisotropic Lifshitz point at O(epsilon(2)(L))

We present the critical exponents nu (L2), eta (L2) and gamma (L) for an m-axial Lifshitz point at second order in an epsilon (L) expansion. We introduce a constraint involving the loop momenta along the m-dimensional subspace in order to perform two- and three-loop integrals. The results are valid in the range 0 less than or equal to m less than or equal to d. The case m = 0 corresponds to the usual Ising-like critical behaviour.

Irregular Satellites of Jupiter: a study of the capture direction

The irregular satellites of Jupiter are believed to be captured asteroids or planetesimals. In the present work is studied the direction of capture of these objects as a function of their orbital inclination. We performed numerical simulations of the restricted three-body problem, Sun-Jupiter-particle, taking into account the growth of Jupiter. The integration was made backward in time. Initially, the particles have orbits as satellites of Jupiter, which has its present mass. Then, the system evolved with Jupiter losing mass and the satellites escaping from the planet. The reverse of the escape direction corresponds to the capture direction. The results show that the Lagrangian points L1 and L2 mainly guide the direction of capture. Prograde satellites are captured through these two gates with very narrow amplitude angles. In the case of retrograde satellites, these two gates are wider. The capture region increases as the orbital inclination increases. In the case of planar retrograde satellites the directions of capture cover the whole 360 degrees around Jupiter. We also verified that prograde satellites are captured earlier in actual time than retrograde ones.

Fadiga de grampos de retenção em prótese parcial removível. Efeito de ligas, espessuras e técnicas de fusão. Parte I.

The authors looked for the verification of the fatigue of retentive clasps utilized on the removable partial denture. According to this, it was idealized and built on assay machine, that through movements, simulate the insertion and removal of the clasp for a pattern tooth, manufactured on cobalt-chromium which has all the preparation normally utilized to the correct confection of this type of prosthesis. It was utilized three different commercial alloys based on cobalt-chromium: L1-Biosil; L2-Steldent; L3-Duracron. It was utilized the T clasp of Roach, with was tested upon three different proportions among width and thickness: E1-1.7;E2-2.0 and E3-2.3 and was casted through two casting techniques: F1-oxygen-gas and F2-oxygen-acetylene. The clasps were tested on the machine, which allowed the reading of the number of insertion and removal cycles made until fatigue appeared. The obtained results were submitted to the statistic analysis and the authors concluded that: a) L3 (Duracrom) obtained the best results followed by L1 (Biosil) and finally L3 (Steldent); b) among the analyzed thickness, the best results were obtained by E3, followed by E2 and after this E1; c) form the casting techniques, F2 gave us the best results.

Fadiga de grampos de retenção em prótese parcial removível. Efeito de ligas, espessuras e técnicas de fusão. Parte II.

The authors tested the T clasp of Roach in three differents proportions among width and thickness: E1-1.7; E2-2.0 and E3-2.3, with a constant length of 15 mm. These clasps were casted with three cobalt-chromium alloys (L1-Biosil; L2-Steldent and L3-Duracrom), through two casting techniques (F1-oxygen-gas and F2-oxygen-acetylene). The fatigue of the clasps were verified by using and assay machine, that through movements, simulate the insertion and removal of the clasps for a pattern which were obtained from a premolar, prepared in a surveyor. This machine detect the fatigue of the clasps and count the number of cycles of insertion and removal realized. The obtained results of the interaction between the analysed factors, were submitted to the statistic analysis and the authors concluded that: a) the interaction of factors, Alloy x Thickness, Alloy x Casting Technique and Thickness x Casting Technique did not change the order of effects that the factors showed separately but gave rise to effects of different magnitude for any observed sense; b) the simultaneous interaction of the factors Alloy x Thickness x Casting Technique confirmed the superiority of the L3 alloy, the thickness E3 and the F2 casting technique.

Peridural com ropivacaina a 1%: Experiencia com volume proporcional a estatura

Background and Objectives - Ropivacaine - a local amino amide anesthetic agent - is a plain S enantiomer which makes it a potent and low toxicity drug. The aim of our study was to evaluate 1% ropivacaine for epidural block in lower doses than those described in the literature. Methods - Thirty-eight patients, physical status ASA I and II, aged 15 to 70 years, weighing 50 to 100 kg were selected. Premedication consisted of 15 mg oral midazolam given 60 min before anesthesia induction. In the OR, after standard monitoring a catheter was inserted intravenously to administer 10 ml.kg-1 Ringers lactate solution. Epidural puncture was performed with the patient in the sitting position and 1% ropivacaine was administered in a volume corresponding to 10% of patient's height in centimeters. With the patient in the supine position, motor blockade intensity, temperature sensitivity and sensory block extension at 1, 3, 5, 7, 10, 15, 20, 30 minutes after drug injection were evaluated. Blood pressure, heart rate and adverse side effects during the course of anesthesia and in the post-anesthetic period were also observed. In the recovery room patients were followed-up until motor blockade intensity temperature sensitivity and sensory block had returned to level L2. Results - Mean values were 41.4 years of age, 68.8 kg of body weight and 165 cm height. Upper thermal blockade level was T4 and upper sensory block level was T6. Most patients showed motor block level 1 (Bromage scale) after 30 minutes of observation. Motor block mean duration was 254 minutes and temperature sensitivity 426 minutes. Only three patients had complications: two cases of hypotension and one of bradycardia. Conclusions - In the volumes used in this study, ropivacaine produced adequate analgesia and a less intense lower limb motor block which, however, was sufficient to allow for surgical procedures with low incidence of side-effects.

Avaliação do nível de multicaminho no posicionamento relativo GPS e sua atenuação através da análise de multiresolução

The multipath effect affects the differential and relative positioning, even that one involving short baselines. So it is necessary to detect this effect, check the caused error level, and mainly, its removal. This paper aims at analysing and comparing some useful components in the detection of this effect. These components are the Signal to Noise Ratio (SNR), the values of MP1 and MP2 obtained from the TEQC software that indicates the multipath level in the carriers L1 and L2, the multipath repeatability in consecutive days and the elevation angle and the azimuth of the satellites. For this purpose, an experiment is carried out, comparing such components in the presence and the absence of reflector objects that cause the multipath. Not only there is clear multipath repeatability in the residuals, but it also appears in the measures SNR, MP1 and MP2, reaching up 99% of correlation. For reduction, at least, of the high frequency multipath effect, the Multi-Resolution Analysis using wavelets is applied in the double differences (DD) measures. Some statistical tests were accomplished, which indicate results improvement, and mainly, larger reliability in the solution of the ambiguities, reaching up 49% of improvement concerning the Ratio test without applying the proposed method.

Clonagem do abacateiro variedade Duke 7 (Persea americana Mill.) por alporquia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Degradação ruminal e síntese de proteína microbiana em bovines alimentados com silagem de sorgo contendo tanino suplementado com concentrado ou uréia

This work aimed to determine ruminal parameters of dry mater (DM), neutral detergent fiber (NDF) and protein synthesis in the rumen of animals fed diets based on sorghum with different tannin levels. In situ degradation was evaluated by rumen incubation of level 1 (L1) and level 2 (L2) sorghum silages during 0, 6, 24, 48 and 96 hours. A duplicated 4 × 4 Latin Square was used. Potential degradability (PD) of DM was similar among silages, whereas the effective degradability (ED) decreased when the diets were supplemented with concentrate. Microbial nitrogen flux and microbial synthesis efficiency were not affected by roughage source. The synthesis efficiency, expressed in organic matter and crude protein digested in rumen, was higher in L1 tannin diets supplemented with concentrate. There was not relationship between the presence of tannins and the parameters of ruminal degradation.

Stress distribution in ceramic restorations over natural tooth using finite element analysis. lithium disilicate x aluminum oxide material

Background: Data on stress distribution in tooth-restoration interface with different ceramic restorative materials are limited. The aim of this chapter was to assess the stress distribution in the interface of ceramic restorations with laminate veneer or full-coverage crown with two different materials (lithium dissilicate and densely sintered aluminum oxide) under different loading areas through finite element analysis. Materials and Methods: Six two-dimensional finite element models were fabricated with different restorations on natural tooth: laminate veneer (IPS Empress, IPS Empress Esthetic and Procera AllCeram) or full-coverage crown (IPS e.max Press and Procera AllCeram). Two different loading areas (L) (50N) were also determined: palatal surface at 45° in relation to the long axis of tooth (L1) and perpendicular to the incisal edge (L2). A model with higid natural tooth was used as control. von Mises equivalent stress (σ vM) and maximum principal stress (σ max) were obtained on Ansys software. Results: The presence of ceramic restoration increased σ vM and σ max in the adhesive interface, mainly for the aluminum oxide (Procera AllCeram system) restorations. The full-coverage crowns generated higher stress in the adhesive interface under L1 while the same result was observed for the laminate veneers under L2. Conclusions: Lithium dissilicate and densely sintered aluminum oxide restorations exhibit different behavior due to different mechanical properties and loading conditions. © 2011 Nova Science Publishers, Inc.