Crescimento, partição de matéria seca e retenção de Na+, K+ e Cl- em dois genótipos de sorgo irrigados com águas salinas

Os mecanismos de tolerância à salinidade são complexos e dependem de mudanças fisiológicas e anatômicas que ocorrem na planta inteira. Este trabalho teve como objetivo avaliar a retenção de íons, o crescimento e a partição de matéria seca em dois genótipos de sorgo forrageiro [Sorghum bicolor (L.) Moench] irrigados com água com crescentes níveis de salinidade. Sementes selecionadas foram germinadas em vasos com 12 kg de Argissolo Vermelho-Amarelo textura arenosa em condições de casa de vegetação. O delineamento foi inteiramente casualizado, em esquema fatorial 2 x 5, composto por dois genótipos (CSF 18, sensível, e CSF 20, tolerante) e cinco concentrações de sais na água de irrigação, correspondentes às condutividades elétricas (CEa) de 0,5 (controle), 2,0, 4,0, 6,0 e 8,0 dS m-1, com quatro repetições. A aplicação dos tratamentos (concentrações de sais) teve início aos cinco dias após a emergência, e a coleta das plantas foi realizada aos 44 dias depois do início dos tratamentos. Foram determinadas a produção e a partição de matéria seca, bem como a distribuição das raízes nos vasos e os teores de íons (Na+, K+ e Cl-) nas diversas partes da planta. A salinidade reduziu a área foliar e a produção de matéria seca da parte aérea e das raízes; a redução no crescimento da parte aérea foi maior no genótipo CSF 18. A salinidade alterou a partição de fotoassimilados de forma similar nos dois genótipos, resultando em aumento na proporção entre fontes e drenos, o que pode contribuir para a aclimatação das plantas ao estresse salino. As plantas de sorgo mostraram eficiente mecanismo de retenção de Na+, prevenindo seu acúmulo nos tecidos foliares. Esse mecanismo, no entanto, provocou diminuição na suculência foliar. Os teores foliares de K+ e a retenção de Na+ nos colmos foram maiores no genótipo CSF 20 (tolerante).

Kinetics of K release from soils of Brazilian coffee regions: effect of organic acids

Kinetic studies on soil potassium release can contribute to a better understanding of K availability to plants. This study was conducted to evaluate K release rates from the whole soil, clay, silt, and sand fractions of B-horizon samples of a basalt-derived Oxisol and a sienite-derived Ultisol, both representative soils from coffee regions of Minas Gerais State, Brazil. Potassium was extracted from each fraction after eight different shaking time periods (0-665 h) with either 0.001 mol L-1 citrate or oxalate at a 1:10 solid:solution ratio. First-order, Elovich, zero-order, and parabolic diffusion equations were used to parameterize the time dependence of K release. For the Oxisol, the first-order equation fitted best to the experimental data of K release, with similar rates for all fractions and independent of the presence of citrate or oxalate in the extractant solution. For all studied Ultisol fractions, in which K release rates increased when extractions were performed with citrate solution, the Elovich model described K release kinetics most adequately. The highest potassium release rate of the Ultisol silt fraction was probably due to the transference of "non-exchangeable" K to the extractant solution, whereas in the Oxisol exchangeable potassium represented the main K source in all studied fractions.

Medida de reflectancias en inmersión en aceite mediante el método directo y cálculo de n y k de 400 a 1100 nm.

Se ha centrado el problema en las mediciones en aceite en el directo para calcular n y k. Para ello se ha colocado una gota de aceite que se mantiene en contacto con la muestra mediante un cubreobjetos. Éste provoca una reflectancia adicional (efecto glare) que es necesario corregir. Se plantea el desarrollo matemático para esta corrección, y se realizan las comprobaciones con un sistema estándar.

Mineralogical, K-Ar, stable and Sr isotope systematics of K-white micas during very low-grade metamorphism of limestones (Helvetic nappes, Western Switzerland)

Mineralogical, K-Ar, Rb-Sr and stable isotope analyses have been carried out on K-white micas from Helvetic Malm limestones in order to examine their evolution during very low- to low-grade Alpine metamorphism, associated with intense ductile deformation. Metamorphic temperatures were estimated al approximately 300-degrees-C from stable isotopes (quartz-calcite thermometry), occurrence of chloritoid, and `'epizonal'' illite crystallinity index. K-white micas consist of variable mixtures of 2M, phengite and muscovite, as revealed by detailed X-ray diffraction analyses using peak decomposition of the (060, 331) spectra. K-Ar apparent ages display a strong grain-size dependence in which mainly fine-grained size fractions (< 2 mum) record Alpine ages (37-15 Ma). However, these ages provide a relative rather than an absolute chronology of the diachronous Alpine metamorphic evolution of the Helvetic nappes. The resetting of the K-Ar isotopic system of K-white micas to Alpine metamorphic conditions reflects an apparent combination of crystallization/recrystallization and radiogenic Ar-40 diffusion loss. The oxygen isotope compositions of micas (+ 15 to + 22 parts per thousand) are intermediate between detrital and O-18-enriched values expected for micas neoformed within an abundant marine carbonate matrix. No isotopic equilibrium has been reached between calcite and micas. The variable depletion of hydrogen isotope compositions (- 126 to - 82 parts per thousand) is influenced by the interaction with organic matter under closed-system conditions. Organic matter, if not removed, may also represent a serious source of error in K-Ar age determination, by introducing radiogenic Ar-40 contamination. Sr-87/Sr-86 isotope ratios of micas range from 0.70879 to 0.70902 with one outlier at 0.71794. The low values reflect Sr exchange with calcite occurring during crystallization/recrystallization of micas under closed-system conditions.

Structural and functional characterization of (110)-oriented epitaxial La2/3Ca1/3MnO3 electrodes and SrTiO3 tunnel barriers

La2/3Ca1/3MnO3 (LCMO) films have been deposited on (110)-oriented SrTiO3 (STO) substrates. X-ray diffraction and high-resolution electron microscopy reveal that the (110) LCMO films are epitaxial and anisotropically in-plane strained, with higher relaxation along the [1¿10] direction than along the [001] direction; x-ray absorption spectroscopy data signaled the existence of a single intermediate Mn3+/4+ 3d-state at the film surface. Their magnetic properties are compared to those of (001) LCMO films grown simultaneously on (001) STO substrates It is found that (110) LCMO films present a higher Curie temperature (TC) and a weaker decay of magnetization when approaching TC than their (001) LCMO counterparts. These improved films have been subsequently covered by nanometric STO layers. Conducting atomic-force experiments have shown that STO layers, as thin as 0.8 nm, grown on top of the (110) LCMO electrode, display good insulating properties. We will show that the electric conductance across (110) STO layers, exponentially depending on the barrier thickness, is tunnel-like. The barrier height in STO (110) is found to be similar to that of STO (001). These results show that the (110) LCMO electrodes can be better electrodes than (001) LCMO for magnetic tunnel junctions, and that (110) STO are suitable insulating barriers.

[Illustrations de Croquis parisiens] / J.L. Forain, J.F. Rafaëlli, dess. et grav. ; J.K. Huysmans, aut. du texte

Comprend : [Planche du 1er Frontispice. Parisienne fin de siècle] [Cote : BNF C214312] ; [2ème frontispice. Hommes et femmes de la bourgeoisie dans un café parisien.] [Cote : BNF 91C153751] ; [Planche du 3ème frontispice. Homme et deux élégantes dans un café parisien.] [Cote : BNF C214313] ; [Planche en regard de la p.11. Bourgeois et élégantes parisiennes.] [Cote : BNF C214314] ; [Planche en regard de la p.37. L'ambulante.] [Cote : BNF C39544] ; [Planche en regard de la p.49. Le marchand de marrons parisien.] [Cote : BNF C39545] ; [Planche en regard de la p.55. La Bièvre. Paysage des alentours de Paris.] [Cote : BNF C39546] ; [Planche en regard de la p.66. La rue de la Chine à Paris.] [Cote : BNF C39547] ; [Planche en regard de la p.85. Homme mangeant à une table de café parisien.] [Cote : BNF C214315] ; [Planche en regard de la p.99. Elégante parisienne.] [Cote : BNF C214316]

Seismic reflectivity of the sediment-covered seafloor: Effects of velocity gradients and fine-scale layering

Knowledge of the reflectivity of the sediment-covered seabed is of significant importance to marine seismic data acquisition and interpretation as it governs the generation of reverberations in the water layer. In this context pertinent, but largely unresolved, questions concern the importance of the typically very prominent vertical seismic velocity gradients as well as the potential presence and magnitude of anisotropy in soft surficial seabed sediments. To address these issues, we explore the seismic properties of granulometric end-member-type clastic sedimentary seabed models consisting of sand, silt, and clay as well as scale-invariant stochastic layer sequences of these components characterized by realistic vertical gradients of the P- and S-wave velocities. Using effective media theory, we then assess the nature and magnitude of seismic anisotropy associated with these models. Our results indicate that anisotropy is rather benign for P-waves, and that the S-wave velocities in the axial directions differ only slightly. Because of the very high P- to S-wave velocity ratios in the vicinity of the seabed our models nevertheless suggest that S-wave triplications may occur at very small incidence angles. To numerically evaluate the P-wave reflection coefficient of our seabed models, we apply a frequency-slowness technique to the corresponding synthetic seismic wavefields. Comparison with analytical plane-wave reflection coefficients calculated for corresponding isotropic elastic half-space models shows that the differences tend to be most pronounced in the vicinity of the elastic equivalent of the critical angle as well as in the post-critical range. We also find that the presence of intrinsic anisotropy in the clay component of our layered models tends to dramatically reduce the overall magnitude of the P-wave reflection coefficient as well as its variation with incidence angle.

Design of electron band pass filters for electrically biased finite superlattices

We design optimal band pass filters for electrons in semiconductor heterostructures, under a uniform applied electric field. The inner cells are chosen to provide a desired transmission window. The outer cells are then designed to transform purely incoming or outgoing waves into Bloch states of the inner cells. The transfer matrix is interpreted as a conformal mapping in the complex plane, which allows us to write constraints on the outer cell parameters, from which physically useful values can be obtained.

Exchange-correlation effects on quantum wires with spin-orbit interactions under the influence of in-plane magnetic fields.

Within the noncollinear local spin-density approximation, we have studied the ground state structure of a parabolically confined quantum wire submitted to an in-plane magnetic field, including both Rashba and Dresselhaus spin-orbit interactions. We have explored a wide range of linear electronic densities in the weak (strong) coupling regimes that appear when the ratio of spin-orbit to confining energy is small (large). These results are used to obtain the conductance of the wire. In the strong coupling limit, the interplay between the applied magnetic field¿irrespective of the in-plane direction, the exchange-correlation energy, and the spin-orbit energy-produces anomalous plateaus in the conductance vs linear density plots that are otherwise absent, or washes out plateaus that appear when the exchange-correlation energy is not taken into account.

Adubação N-P-K e o desenvolvimento, produtividade e qualidade dos frutos do abacaxi 'gold' (MD-2)

O abacaxi Gold (MD-2) tem atraído interesse no Brasil, visando à exportação. No entanto, há poucas informações científicas no País sobre o manejo nutricional dessa cultivar. O presente trabalho teve por objetivo determinar o efeito da adubação com N, P e K no estado nutricional da planta, no desenvolvimento, na produtividade e na qualidade dos frutos do abacaxi MD-2. Foram avaliados os efeitos de cinco doses de N, cinco de P2O5 e cinco de K 2O sobre as características de crescimento da folha D e do fruto, bem como sobre os teores de N, P e K das folhas D e as características de qualidade do fruto. Concluiu-se que as maiores produtividade e massa de fruto foram obtidas com a aplicação de 650,6 kg ha-1 de N e 735,9 kg ha-1 de K2O, correspondendo a 12,7 e 14,4 g/planta de N e K2O, respectivamente. Nesse caso, a indução floral deve ser recomendada quando a folha D apresentar comprimento > 75,5 cm. Os valores das características de qualidade do fruto diminuíram com a aplicação de N e aumentaram com a adição de P e K, sendo que as doses máximas de 205,8 kg ha-1 de P2O5 e 703,4 kg ha-1 de K2O corresponderam a 4,01 e 13,7 g/planta de N e K2O, respectivamente.