Influence of test methodology and probe geometry on nanoscale fatigue mechanisms of diamond-like carbon thin film

The aim of this paper is to investigate the mechanism of nanoscale fatigue using nano-impact and multiple-loading cycle nanoindentation tests, and compare it to previously reported findings of nanoscale fatigue using integrated stiffness and depth sensing approach. Two different film loading mechanism, loading history and indenter shapes are compared to comprehend the influence of test methodology on the nanoscale fatigue failure mechanisms of DLC film. An amorphous 100 nm thick DLC film was deposited on a 500 μm silicon substrate using sputtering of graphite target in pure argon atmosphere. Nano-impact and multiple-load cycle indentations were performed in the load range of 100 μN to 1000 μN and 0.1 mN to 100 mN, respectively. Both test types were conducted using conical and Berkovich indenters. Results indicate that for the case of conical indenter, the combination of nano-impact and multiple-loading cycle nanoindentation tests provide information on the life and failure mechanism of DLC film, which is comparable to the previously reported findings using the integrated stiffness and depth sensing approach. However, the comparison of results is sensitive to the applied load, loading mechanism, test-type and probe geometry. The loading mechanism and load history is therefore critical which also leads to two different definitions of film failure. The choice of exact test methodology, load and probe geometry should therefore be dictated by the in-service tribological conditions, and where necessary both test methodologies can be used to provide better insights of failure mechanism. Molecular dynamics (MD) simulations of the elastic response of nanoindentation is reported, which indicates that the elastic modulus of the film measured using MD simulation was higher than that experimentally measured. This difference is attributed to the factors related to the presence of material defects, crystal structure, residual stress, indenter geometry and loading/unloading rate differences between the MD and experimental results.

An Innovative teaching tool for students is it Appropriate?

Background: Clinical supervision takes place once the newly qualified nurse is employed in clinical practice. However, often the variety and diversity of nursing jobs can result in a hit and miss delivery of supervision training. By introducing training uniformly at undergraduate stage a more seamless transition may occur (McColgan K, Rice C. 2012).

There is an increased interest in higher education in the use of online learning resources for students. As part completion of a DNP an App. for training students in clinical supervision was developed.

Aim: The creation of a clinical supervision training App. for use in undergraduate nursing.

Objectives:
•To develop a teaching tool that is up to date, current and easily accessible to students.
•To introduce supervision training for undergraduate nursing students
•To motivate the undergraduate nursing student to identify examples from their clinical experience to encourage change and promote professional development.

Approach:
Stage 1
In 2010/11 informal inquiries with senior nurses regarding the introduction of supervision training in undergraduate nursing
Stage 2
A review of UK supervision training.
Stage 3
Template production of teaching tool.
Stage 4
Collaboration with a computer technician to transfer multimedia outputs onto an App.
Stage 5
App. piloted with lecturers (n=4) and post registration students (n=20).
Stage 6
Minor alterations made to App. design template
Stage 7
App. included in an experimental study looking at online learning versus blended learning June 2013 (n=61, n=63)

Conclusion: A collaborative approach to the development of any educational programme is essential to ensure the success of the final teaching product (McCutcheon 2013). The end result is that this App. could be:
•Made available to nurses in the UK.
•Adapted to suit other healthcare professionals and students.
•Used as a prototype for other healthcare related subjects.

McColgan K., Rice C. (2012) An online training resource for clinical supervision. Nursing Standard, 26(24) 35-39.
McCutcheon K. (2013) Development of a multi-media book for clinical supervision training in an undergraduate nursing programme. Journal of Nursing Education and Practice, 3(5) 31-38.

Innovative qualitative research methods with children aged 4-7 years

There is a growing body of knowledge that uses innovative qualitative methods to support and facilitate the involvement of young children, aged 7 years and under, in the research process. Across several fields of study the recent growth in research that engages with young children stands in sharp contrast with the situation just a few years ago where there was a dearth of activity and knowledge in this area. Designed to seek their views, experiences and perspectives the range of methods is now burgeoning. This chapter explores reasons for the growth in the use of innovative qualitative methods, the underlying principles through which the engagement of young children has been achieved and the different types of method with detailed case examples. For each method the main critical issues regarding their effectiveness are identified and discussed in further detail. The latter sections of the chapter focus on contemporary issues regarding the use of innovative methods. Highlighted, in particular, are some of the common concerns and criticisms with regards to the trustworthiness, reliability, validity and generalizability of the data that is collated using innovative qualitative methods.

Engineering Innovative Products: A Practical Experience

Engineering Innovative Products: A Practical Experience is a pioneering book that will be of key use to senior undergraduate and graduate engineering students who are being encouraged to explore innovation and commercialization as part of their courses. The book will teach the essential skills of entrepreneurship and address the fundamental requirements needed to establish a successful technology company.

Programmazione e controllo dei gruppi pubblici locali. Dagli strumenti esistenti alle soluzioni innovative per la governance.

Il tema dei servizi pubblici locali è sicuramente centrale nell'attuale contesto socio-economico nazionale ed internazionale, in quanto essi hanno un impatto determinante sulle condizioni di vita dei cittadini e sulla competitività dei sistemi economici. In ragione di ciò, negli ultimi anni in Italia numerose riforme si sono susseguite, con lo scopo di individuare l'assetto più efficace ed efficiente per tale settore. Le suddette riforme hanno così ridisegnato il ruolo degli Enti Locali, che saranno sempre meno gestori diretti e sempre più direttori di una multiforme orchestra composta dalle aziende esterne chiamate a fornire in prima persona le prestazioni agli utenti finali. Il presente lavoro si propone di individuare, anche attraverso una ricerca sui Comuni capoluogo di Emilia-Romagna e Toscana, strumenti di programmazione e controllo in ottica di gruppo che consentano agli Enti Locali di svolgere questo nuovo delicato ruolo. Tali strumenti verranno disegnati sulla base delle necessità informative delle amministrazioni indagate e nel rispetto delle più recenti riforme in tema di programmazione, rilevazione, gestione, controllo, valutazione e comunicazione delle performance pubbliche.

Hybrid address spaces: A methodology for implementing scalable high-level programming models on non-coherent many-core architectures

This paper introduces hybrid address spaces as a fundamental design methodology for implementing scalable runtime systems on many-core architectures without hardware support for cache coherence. We use hybrid address spaces for an implementation of MapReduce, a programming model for large-scale data processing, and the implementation of a remote memory access (RMA) model. Both implementations are available on the Intel SCC and are portable to similar architectures. We present the design and implementation of HyMR, a MapReduce runtime system whereby different stages and the synchronization operations between them alternate between a distributed memory address space and a shared memory address space, to improve performance and scalability. We compare HyMR to a reference implementation and we find that HyMR improves performance by a factor of 1.71× over a set of representative MapReduce benchmarks. We also compare HyMR with Phoenix++, a state-of-art implementation for systems with hardware-managed cache coherence in terms of scalability and sustained to peak data processing bandwidth, where HyMR demon- strates improvements of a factor of 3.1× and 3.2× respectively. We further evaluate our hybrid remote memory access (HyRMA) programming model and assess its performance to be superior of that of message passing.

Masks as methodology and the phenomenological turn: issues of interpretation

The purposes of this chapter are to argue for (i) the heuristic value of the concept of mask and masking in research which has its basis in psychodynamic theory but relating it to socio-cultural theory as means to understanding self-experience (ii) the value of creating and performing masks as one valuable methodological ‘embodied’ form in social and educational research that represent individuals’ richly textured self-other constructions and allow for the interrogation of any simplistic dichotomies associated with notions of ‘inside’ ‘outside’ categories (iii) exploring possibilities and dilemmas of interpretation within this frame

Material Logistics in Urban Construction Sites: A Structural Equation Model

Aim: The aim of this paper is to identify best practice relating to the effective management of materials in an urban, confined construction site, using structural equation modelling.

Methodology: A literature review, case study analysis and questionnaire survey are employed, with the results scrutinised using confirmatory factor analysis in the form of structural equation modelling.

Results: The following are the leading strategies in the management of materials in a confined urban site environment; (1) Consult and review the project programme, (2) Effective communication and delivery, (3) Implement site safety management plans, and (4) Proactive spatial monitoring and control.

Implication for Practice: With the relentless expansion of urban centres and the increasing high cost of materials, any potential savings made on-site would translate into significant monetary concessions on completion of a development.

Originality/Value: As on-site project management professionals successfully identify and implement the various strategies in the management of plant and materials on a confined urban site, successful resource management in this restrictive environment is attainable.

Innovative Aspect of Paper: An empirical study of three different construction sites in three different countries (Ireland, England and USA) together with a questionnaire survey from the industry, investigating the managerial strategies in the management of plant and material in confined urban site environments

The List_Tree - an innovative solution to customer portfolio representation

The scale of BT's operations necessitates the use of very large scale computing systems, and the storage and management of large volumes of data. Customer product portfolios are an important form of data which can be difficult to store in a space efficient way. The difficulties arise from the inherently structured form of product portfolios, and the fact that they change over time as customers add or remove products. This paper introduces a new data-modelling abstraction called the List_Tree. It has been designed specifically to support the efficient storage and manipulation of customer product portfolios, but may also prove useful in other applications with similar general requirements.