Effect of Video Camera-Based Remote Roadway Condition Monitoring on Snow Removal-Related Maintenance Operations. 2014

Remote monitoring through the use of cameras is widely utilized for traffic operation, but has not been utilized widely for roadway maintenance operations. The Utah Department of Transportation (UDOT) has implemented a new remote monitoring system, referred to as a Cloud-enabled Remote Video Streaming (CRVS) camera system for snow removal-related maintenance operations in the winter. The purpose of this study was to evaluate the effectiveness of the use of the CRVS camera system in snow removal-related maintenance operations. This study was conducted in two parts: opinion surveys of maintenance station supervisors and an analysis on snow removal-related maintenance costs. The responses to the opinion surveys mostly displayed positive reviews of the use of the CRVS cameras. On a scale of 1 (least effective) to 5 (most effective), the average overall effectiveness given by the station supervisors was 4.3. An expedition trip for this study was defined as a trip that was made to just check the roadways if snow-removal was necessary. The average of the responses received from surveys was calculated to be a 33 percent reduction in expedition trips. For the second part of this study, an analysis was performed on the snow removal-related maintenance cost data provided by UDOT to see if the installation of a CRVS camera had an effect in reducing expedition trips. This expedition cost comparison was performed for 10 sets of maintenance stations within Utah. It was difficult to make any definitive inferences from the comparison of expedition costs over the years for which precipitation and expedition cost data were available; hence a statistical analysis was performed using the Mixed Model ANOVA. This analysis resulted in an average of 14 percent higher ratio of expedition costs at maintenance stations with a CRVS camera before the installation of the camera compared to the ratio of expedition costs after the installation of the camera. This difference was not proven to be statistically significant at the 95 percent confident level, but indicated that the installation of CRVS cameras was on the average helpful in reducing expedition costs and may be considered practically significant. It is recommended that more detailed and consistent maintenance cost records be prepared for accurate analysis of cost records for this type of study in the future.

Freqüência de irrigação por gotejamento durante o estádio vegetativo do tomateiro para processamento industrial

Objetivo deste trabalho foi o de estabelecer critério para o manejo de água, durante o estádio vegetativo do tomateiro para processamento industrial, nas condições de cerrado do Brasil Central. Foram avaliados seis turnos de rega entre 0,5 e 16 dias. O estande final e a produtividade de frutos, maximizados em regas a cada 2 dias, apresentaram resposta quadrática com a freqüência de irrigação, enquanto a produção de biomassa foi maximizada em regas diárias. A massa média de fruto e o número de frutos por planta não foram influenciados pelos tratamentos; isto indica que as diferenças de produção foram causadas, principalmente, pela variação do estande final. A profundidade efetiva de raízes apresentou resposta linear positiva com o turno de rega. As plantas irrigadas a cada 8 e 16 dias apresentaram um sistema radicular cerca de 10 cm mais profundo do que aquelas irrigadas duas vezes por dia. O teor de sólidos solúveis totais, a acidez titulável e a taxa de fruto podre não foram influenciados pelos turnos de rega. Observou-se que para melhor desempenho do tomateiro, durante o estádio vegetativo as irrigações devem ser realizadas a cada 2 dias, ou seja, quando a tensão de água no solo atingir cerca de 17 kPa.

Plasma concentrations of the enantiomers of methadone and therapeutic response in methadone maintenance treatment

Methadone is a 50:50 mixture of two enantiomers and (R)-methadone accounts for the majority of its opioid effect. The aim of this study was to determine whether a blood concentration of (R)-methadone can be associated with therapeutic response in addict patients in methadone maintenance treatment. Trough plasma concentrations of (R)-, (S)- and (R,S)-methadone were measured in 180 patients in maintenance treatment. Therapeutic response was defined by the absence of illicit opiate or cocaine in urine samples collected during a 2-month period prior to blood sampling. A large interindividual variability of (R)-methadone concentration-to-dose-to-weight ratios was found (mean, S.D., median, range: 112, 54, 100, 19-316 ng x kg/ml x mg). With regard to the consumption of illicit opiate (but not of cocaine), a therapeutic response was associated with (R)- (at 250 ng/ml) and (R,S)-methadone (at 400 ng/ml) but not with (S)-methadone concentrations. A higher specificity was calculated for (R)- than for (R,S)-methadone, as the number of non-responders above this threshold divided by the total number of non-responders was higher for (R,S)-methadone (19%) than for (R)-methadone (7%). The results support the use of therapeutic drug monitoring of (R)-methadone in cases of continued intake of illicit opiates. Due to the variability of methadone concentration-to-dose-to-weight ratios, theoretical doses of racemic methadone could be as small as 55 mg/day and as large as 921 mg/day to produce a plasma (R)-methadone concentration of 250 ng/ml in a 70-kg patient. This demonstrates the importance of individualizing methadone treatment.

Maintenance of A/P body regions in planarians by TCEN49, a putative cystine-knot neurotrophin.

In freshwater planarians, the protein TCEN49 has been linked to the regional specification of the central body region, which includes the pharynx.

Appropriate maintenance treatment for Crohn's disease: results of a multidisciplinary international expert panel - EPACT II

Introduction: Biological. therapy has dramatically changed management of Crohn's disease (CD). New data have confirmed the benefit and relative long-term safety of anti-TNF alpha inhibition as part of a regular scheduled administration programme. The EPACT appropriateness criteria for maintenance treatment after medically-induced remission (MIR) or surgically-induced remission (SIR) of CD thus required updating. Methods: A multidisciplinary international expert panel (EPACT II, Geneva, Switzerland) discussed and anonymously rated detailed, explicit clinical indications based on evidence in the literature and personal expertise. Median ratings (on a 9-point scale) were stratified into three assessment categories: appropriate (7-9), uncertain (4-6 and/or disagreement) and inappropriate (1-3). Experts ranked appropriate medication according to their own clinical practice, without any consideration of cost. Results: Three hundred and ninety-two specific indications for maintenance treatment of CD were rated (200 for MIR and 192 for SIR). Azathioprine, methotrexate and/or anti-TNF alpha antibodies were considered appropriate in 42 indications, corresponding to 68% of all appropriate interventions (97% of MIR and 39% of SIR). The remaining appropriate interventions consisted of mesalazine and a "wait-and-see" strategy. Factors that influenced the panel's voting were patient characteristics and outcome of previous treatment. Results favour use of anti-TNF alpha agents after failure of any immunosuppressive therapy, while earlier primary use remains controversial. Conclusion: Detailed explicit appropriateness criteria (EPACT) have been updated for maintenance treatment of CD. New expert recommendations for use of the classic immunosuppressors as well as anti-TNF alpha agents are now freely available online (www.epact.ch). The validity of these criteria should now be tested by prospective evaluation. (C) 2009 European Crohn's and Colitis Organisation. Published by Elsevier B.V. All rights reserved.

Audit report on America’s Agricultural Industrial Heritage Landscape, Inc., d/b/a Silos and Smokestacks National Heritage Area and Silos and Smokestacks Natural Heritage Area Foundation in Waterloo, Iowa for the years ended December 31, 2014 and 2013

Audit report on America’s Agricultural Industrial Heritage Landscape, Inc., d/b/a Silos and Smokestacks National Heritage Area and Silos and Smokestacks Natural Heritage Area Foundation in Waterloo, Iowa for the years ended December 31, 2014 and 2013

Projecte d'adequació d'una nau industrial per a la implantació d'una indústria de processat d'ametlles

El projecte se situa en una explotació agrícola de 20 ha, 18 de les quals estan destinades al cultiu d’ametllers de la varietat Vairo. L’explotació pertany al municipi de l’Albi, a la comarca de Les Garrigues, província de Lleida. Actualment a la finca existeix una nau industrial sense instal•lació elèctrica ni hidràulica i sense cap partició a l’interior que es fa servir com a magatzem d’eines. Les ametlles recollides a l’explotació són comercialitzades a una cooperativa de Reus. Els serveis dels que disposa la finca actualment són: - Escomesa elèctrica a l’entrada de la finca. - Aigua del canal Segarra-Garrigues pressuritzada. Escomesa a l’entrada de la finca. - Fossa sèptica de 50 m3. Es troba a 20 m del col•lector general pel qual s’evacuaran les aigües residuals. Es tracta d’una antiga bassa soterrada que ja existia i que se’n reconvertirà el seu ús. L’objectiu del projecte és descriure i dissenyar l’adequació de la nau industrial de dimensions 10 m x 12 m (120 m2) per implantar una indústria de processat primari d’ametlla. El processat primari consisteix en el desclovat de l’ametlla (separació del gra de la closca), assecat del gra obtingut per aconseguir una humitat inferior al 6 % i finalment l’envasat d’aquest gra. Com a procés secundari s’envasarà i es comercialitzarà la closca obtinguda en el procés de descolvat

Use of Reagent Grade Versus Industrial Grade Trichlorethylene in Asphalt Recoveries, MLR-83-05, 1983

This is a continuation of a project initiated a year ago to determine any differences in test results on recovered asphalt cements caused by the use of industrial grade of solvent as compared with the reagent grade. AASHTO specifies the use of reagent grade of trichlorethylene, but the Laboratory uses industrial grade which costs much less. Last year this objective of the project was aborted when it was found that a larger difference in test results was obtained between the two distillation apparatuses than between the two solvents, Then all efforts were directed toward obtaining uniformity in test results between the apparatuses under the east hood as compared with that under the west hood. Considerable progress was made toward this end. (See report under this same title dated April 1982). The objective this year was to again evaluate the results when using both variables (apparatuses and solvents). Another objective developed later in this investigation; this was to determine any differences in test results on recovered asphalt cements caused by the use of reclaimed trichlorethylene (from the distillation process) as compared with the use of industrial grade of solvent. At the present time the reclaimed trichlorethylene is discarded. If the reclaimed solvent could be used for further recoveries, a considerable savings in solvent costs would result.

Thin Maintenance Surfaces for Municipalities, TR-507, 2007

As streets age, officials must deal with rehabilitating and reconstructing these pavements to maintain a safe and comfortable ride. In light of nationwide budget shortfalls, cost-effective methods of extending pavement service life must be developed or the overall condition of street systems will continue to fall. Thin maintenance surfaces (TMSs) are a set of cost-effective preventive maintenance surfacing techniques that can be used to extend the life of bituminous pavement—pavement built with hot mix asphalt, hot mix asphalt overlays of portland cement concrete pavements, built-up seal coat (chip seal), stabilized materials, or a combination of these. While previous phases of TMS research have provided information about the uses of thin maintenance surfaces in rural settings, urban areas have different road maintenance challenges that should be considered separately. This research provides city street officials with suggestions for TMS techniques that street departments can easily test and include into their current programs. This research project facilitated the construction of TMS test sections in Cedar Rapids, Council Bluffs, and West Des Moines (all urban settings in Iowa). Test section sites and surfaces were selected to suit the needs of municipalities and were applied to roads with an array of various distresses and maintenance needs. Condition surveys of each test section were performed before construction, after construction, and after the first winter to record the amount and severity of existing distress and calculate the pavement condition index. Because conditions of the test sections varied greatly, determining which surface was most successful by comparing case studies was not feasible. However, some general conclusions can be made from this research. TMSs are suitable preventive maintenance techniques for a municipal street department’s program for preserving existing pavements. Careful attention should be paid to proper planning, quality control during construction, aggregate and binder selection, and aggregate embedment in order to support successful TMS application.

Aggregates for Thin Maintenance Surfaces, TR-435, 2003

Important qualities of aggregates used for thin maintenance surface (TMS) include an aggregates wear and skid resistance, shape, gradation, and size. The wear and skid resistance of an aggregate influences the lifetime of the individual aggregate particles, and thus the lifetime of the TMS. A TMS’s effectiveness is impacted by the shape, gradation, and size of the aggregate used for the surfacing material along with the lifetime of the aggregate.

Asphalt Binders for Thin Maintenance Surfaces, TR-435, 2003

Asphalt is used as a binder for thin maintenance surface (TMS) applications because of two key properties, it is waterproof and it adheres relatively well to the aggregate. Since asphalt is too stiff at room temperature to apply to the road surface, it is usually applied as either a cutback asphalt or an asphalt emulsion. The asphalt emulsions can be further divided into high float emulsions, cationic emulsions or polymer-modified binders, which are emulsions with polymers added to them. These types of binders are discussed further below.

Field Testing of Abrasive Delivery Systems in Winter Maintenance, TR-458, 2009

The key goals in winter maintenance operations are preserving the safety and mobility of the traveling public. To do this, it is in general necessary to try to increase the friction of the road surface above the typical friction levels found on a snow or ice covered roadway. Because of prior work on the performance of abrasives (discussed in greater detail in chapter 2) a key concern when using abrasives has become how to ensure the greatest increase in pavement friction when using abrasives for the longest period of time. There are a number of ways in which the usage of abrasives can be optimized, and these methods are discussed and compared in this report. In addition, results of an Iowa DOT test of zero-velocity spreaders are presented. Additionally in this study the results of field studies conducted in Johnson County Iowa on the road surface friction of pavements treated with abrasive applications using different modes of delivery are presented. The experiments were not able to determine any significant difference in material placement performance between a standard delivery system and a chute based delivery system. The report makes a number of recommendations based upon the reviews and the experiments.

Investigation of Materials for the Reduction and Prevention of Corrosion on Highway Maintenance Equipment, TR-472, 2009

The issue of corrosion of winter maintenance equipment is becoming of greater concern because of the increased use of liquid solutions of ice control chemicals, as opposed to their application in solid form. Being in liquid form, the ice control chemicals can more easily penetrate into the nooks and crannies on equipment and avoid being cleansed from the vehicle. Given this enhanced corrosive ability, methods must be found to minimize corrosion. The methods may include coatings, additives, cleansing techniques, other methods, and may also include doing nothing, and accepting a reduced equipment lifetime as a valid (perhaps) trade off with the enhanced benefits of using liquid ice control chemicals. In reality, some combination of these methods may prove to be optimal. Whatever solutions are selected, they must be relatively cheap and durable. The latter point is critical because of the environment in which maintenance trucks operate, in which scrapes, scratches and dents are facts of life. Protection methods that are not robust simply will not work. The purpose of this study is to determine how corrosion occurs on maintenance trucks, to find methods that would minimize the major corrosion mechanisms, and to

Performance Measurement for Highway Winter Maintenance Operations, TR-491, 2009

The goal of this research project was to develop a method to measure the performance of a winter maintenance program with respect to the task of providing safety and mobility to the travelling public. Developing these measures required a number of steps, each of which was accomplished. First, the impact of winter weather on safety (crash rates) and mobility (average vehicle speeds were measured by a combination of literature reviews and analysis of Iowa Department of Transportation traffic and Road Weather Information System data. Second, because not all winter storms are the same in their effects on safety and mobility, a method had to be developed to determine how much the various factors that describe a winter storm actually change safety and mobility. As part of this effort a storm severity index was developed, which ranks each winter storm on a scale between 0 (a very benign storm) and 1 (the worst imaginable storm). Additionally a number of methods of modeling the relationships between weather, winter maintenance actions and road surface conditions were developed and tested. The end result of this study was a performance measure based on average vehicle speed. For a given class of road, a maximum expected average speed reduction has been identified. For a given storm, this maximum expected average speed reduction is modified by the storm severity index to give a target average speed reduction. Thus, if for a given road the maximum expected average speed reduction is 20 mph, and the storm severity for a particular storm is 0.6, then the target average speed reduction for that road in that storm is 0.6 x 20 mph or 12 mph. If the average speed on that road during and after the storm is only 12 mph or less than the average speed on that road in good weather conditions, then the winter maintenance performance goal has been met.

Uso industrial de grãos de cevada de lavouras dessecadas em pré-colheita

O objetivo deste trabalho foi avaliar o impacto da antecipação da colheita de lavouras de cevada sobre a germinação dos grãos, ao longo de 12 meses de armazenamento. O ensaio de campo foi realizado em 2002 e 2003. As parcelas colhidas foram armazenadas nos anos subseqüentes aos dos ensaios em campo, e a germinação foi monitorada mensalmente. Os tratamentos avaliados foram: dessecação com os princípios ativos glifosato e paraquat, nas doses 1, 1,5 e 2 L ha-1, além das testemunhas, colhidas normalmente e de forma antecipada, sem dessecação. O delineamento utilizado foi o de blocos ao acaso, com três repetições. A colheita antecipada sem dessecação foi o tratamento de maior prejuízo qualitativo à germinação dos grãos. A deterioração qualitativa temporal dos grãos, nos tratamentos com herbicidas dessecantes, foi estatisticamente similar à observada nas amostras oriundas da testemunha colhida normalmente, sem dessecação. Não foram encontradas evidências de que o uso de herbicidas dessecantes acelere o processo de perda de germinação de grãos de cevada, ao longo do período de armazenagem, para os produtos e doses testados.