Síntese de pigmento cerâmico ferrita de cobalto utilizando planejamento experimental

Synthetic inorganic pigments are the most widely used in ceramic applications because they have excellent chemical and thermal stability and also, in general, a lower toxicity to man and to the environment. In the present work, the ceramic black pigment CoFe2O4 was synthesized by the polymerization Complex method (MPC) in order to form a material with good chemical homogeneity. Aiming to optimize the process of getting the pigment through the MPC was used a fractional factorial design 2(5-2), with resolution III. The factors studied in mathematical models were: citric acid concentration, the pyrolysis time, temperature, time and rate of calcination. The response surfaces using the software statistica 7.0. The powders were characterized by thermal analysis (TG/DSC), x-ray diffraction (XRD), scanning electron microscopy (SEM) and spectroscopy in the UV-visible. Based on the results, there was the formation of phase cobalt ferrite (CoFe2O4) with spinel structure. The color of the pigments obtained showed dark shades, from black to gray. The model chosen was appropriate since proved to be adjusted and predictive. Planning also showed that all factors were significant, with a confidence level of 95%

Análise comparativa entre simuladores de linha de fluxo e diferenças finitas para um reservatório de petróleo submetido a injeção de água

Water injection is the most widely used method for supplementary recovery in many oil fields due to various reasons, like the fact that water is an effective displacing agent of low viscosity oils, the water injection projects are relatively simple to establish and the water availability at a relatively low cost. For design of water injection projects is necessary to do reservoir studies in order to define the various parameters needed to increase the effectiveness of the method. For this kind of study can be used several mathematical models classified into two general categories: analytical or numerical. The present work aims to do a comparative analysis between the results presented by flow lines simulator and conventional finite differences simulator; both types of simulators are based on numerical methods designed to model light oil reservoirs subjected to water injection. Therefore, it was defined two reservoir models: the first one was a heterogeneous model whose petrophysical properties vary along the reservoir and the other one was created using average petrophysical properties obtained from the first model. Comparisons were done considering that the results of these two models were always in the same operational conditions. Then some rock and fluid parameters have been changed in both models and again the results were compared. From the factorial design, that was done to study the sensitivity analysis of reservoir parameters, a few cases were chosen to study the role of water injection rate and the vertical position of wells perforations in production forecast. It was observed that the results from the two simulators are quite similar in most of the cases; differences were found only in those cases where there was an increase in gas solubility ratio of the model. Thus, it was concluded that in flow simulation of reservoirs analogous of those now studied, mainly when the gas solubility ratio is low, the conventional finite differences simulator may be replaced by flow lines simulator the production forecast is compatible but the computational processing time is lower.

Modelos matemáticos para estimativa do consumo máximo de oxigênio pela ventilometria de esforço em indivíduos saudáveis

The relation between metabolic demand and maximal oxygen consumption during exercise have been investigated in different areas of knowledge. In the health field, the determination of maximal oxygen consumption (VO2max) is considered a method to classify the level of physical fitness or the risk of cardiocirculatory diseases. The accuracy to obtain data provides a better evaluation of functional responses and allows a reduction in the error margin at the moment of risk classification, as well as, at the moment of determination of aerobic exercise work load. In Brasil, the use of respirometry associated to ergometric test became an opition in the cardiorespiratory evaluation. This equipment allows predictions concerning the oxyredutase process, making it possible to identify physiological responses to physical effort as the respiratory threshold. This thesis focused in the development of mathematical models developed by multiple regression validated by the stepwise method, aiming to predict the VO2max based on respiratory responses to physical effort. The sample was composed of a ramdom sample of 181 healthy individuals, men and women, that were randomized to two groups: regression group and cross validation group (GV). The voluntiars were submitted to a incremental treadmill test; objetiving to determinate of the second respiratory threshold (LVII) and the Peak VO2max. Using the método forward addition method 11 models of VO2max prediction in trendmill were developded. No significative differences were found between the VO2max meansured and the predicted by models when they were compared using ANOVA One-Way and the Post Hoc test of Turkey. We concluded that the developed mathematical models allow a prediction of the VO2max of healthy young individuals based on the LVII

Fragmentos do pensamento dialético na história da construção das ciências da natureza

Este trabalho tem por objetivo identificar uma possível inclinação das ciências naturais em direção ao materialismo dialético. Para tanto, procura-se apresentar a história da dialética a partir da discussão racionalismo/empirismo moderno e seus desdobramentos até as tendências dialéticos contemporâneas. Os autores discutidos são Kant, Hegel, Marx, Engels, Lenin, Horkheimer, Marcuse, Habermas, Bachelard e suas escolas epistemológicas, completadas por Althusser, Lefebvre e Kedrov. Ao lado desses autores discutem-se outros, das duas últimas décadas, procurando extrair-lhes o olhar dialético, oculto em seus discursos acerca da ciência do fim do século. Também se procura encontrar na mecânica quântica, nos fractais, na lógica para-consistente, nos modelos matemáticos e na biologia antideterminista, argumentos para existência de uma forma de abordagem dialética da natureza. Por último, procura-se refletir acerca dos motivos da resistência ao método dialético apresentado pela maioria dos cientistas ocidentais e, sua possível superação.

Efeitos ambientais e genéticos sobre escores visuais e ganho de peso à desmama de animais formadores da raça Brangus

Estudaram-se os efeitos da idade da vaca ao parto e da idade do animal à desmama, bem como os efeitos genéticos aditivo direto e materno e da heterozigose individual, sobre os escores visuais de conformação, precocidade e musculatura e ganho de peso do nascimento à desmama, de animais formadores da raça Brangus. Foram analisados 53.683, 45.136, 52.937 e 56.471 dados de conformação, precocidade e musculatura à desmama e ganho de peso do nascimento à desmama, respectivamente, de animais nascidos entre 1986 e 2002, provenientes do arquivo zootécnico da empresa Gensys Consultores Associados S/C Ltda. Os efeitos de ambiente e genéticos sobre as características em estudo foram analisados pelo método de quadrados mínimos usando modelos matemáticos que incluíram grupo de contemporâneos como variável classificatória e a idade da vaca ao parto, a idade do animal à desmama e os efeitos aditivo direto e materno e da heterozigose individual como co-variáveis. Todos os efeitos incluídos nos modelos afetaram significativamente as características avaliadas, com exceção do efeito da idade da vaca ao parto sobre o ganho de peso do nascimento à desmama e do efeito aditivo materno sobre todas as características estudadas. Os efeitos ambientais e genéticos revelaram-se importantes fontes de variação para as características estudadas e devem, pois, ser considerados na distinção e comparação dos animais para seleção.

Mercado de trabalho, ocupações e rendimentos: a Região Metropolitana de Natal na década de 1990

The aim of this study is the labour market at Natal Metropolitan Region with emphasis in occupations and incomes that took place at the nineties. The definition of its chronological boundaries passed by verification of existence of evident socio-spatial impacts for output, occupation and income in national economy, with rebounds in all national territory, conditioned by institutional and socio-economical transformations which marked Brazilian insertion to capital flows and commodities globalization movement that took place at the cited decade. It has been shown that such impacts did not distributed themselves equally between diverse spatial levels (great regions, federate unities, municipalities) because of historical specificities in each place in terms of output structures and organization of distinct social agents. Having as its basis the Marxist perspective, it tackled theoretically occupations and incomes, transformations in labour universe occurred at world level, mainly in most urbanized areas, and following that to focus changes occurred in Brazilian society related to the search for competitive insertion in global economy during the period regarded. Special attention was gave to Natal Metropolitan Region, because it was historically a concentration area for investments, productive structure, people, occupations and incomes generated/appropriated in Rio Grande do Norte State. The basic data sources for research were the demographic Census (micro data) made by the Instituto Brasileiro de Geografia e Estatística (IBGE) intending to present the structure and the labour market dynamics, having as basis: 1) traditional indicators about labour market; 2) sectors of economic activities and 3) social positions and classes segments. One of the purposes is the demonstration that occupations and incomes keep relation with the restructuring which occurred in each specific sector during the period. Other purpose is to make explicit the factors which bear the participation of distinct segments in production or service execution that make possible the different participation in income distribution. Results are revealing the increasin precariousness in labour market, enlargement of occupations in tertiary sector and greater concentration of average incomes in the social segments which were owners of the greatest capital allowances between residents in Natal Metropolitan Region during the nineties

Growth analysis of sweet pepper cultivated in coconut fiber in a greenhouse

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A elasticidade da pobreza em relação ao crescimento e à desigualdade de renda no nordeste rural brasileiro de 1995 a 2009: uma análise comparativa

This work aims to analyze how the growth in average income and the change in inequality in income distribution have impacted rural poverty in the Northeast in the period 1995 to 2009. Under the approach in Kakwani (1993) e Duclos and Araar (2006), and under the assumption of log-normality of income per capita, exposed in Bourguignon (2002) and Hoffmann (2005), are calculated growth and inequality elasticities of poverty to FGT poverty measures in order to observe the behavior of the sensitivity of poverty to changes in average household income and the change in income distribution / Gini index. Concurrently, decomposes the changes in measures of poverty (proportion of poor) between growth and distribution components (first proposed by Datt and Ravallion, 1992) to assess the effect of weight change and the effect of income inequality change change on poverty. Regarding the estimation of elasticities of poverty and growth and inequality elasticities of the two methodologies used in this work - under the assumption of lognormal distribution of income and FGT measures under the by Kakwani (1993) andDuclos e Araar (2006) - though do not result in identical values, to corroborate same results, ie the long-term decline in rural poverty from 1995 to 2009 the Northeast and the greater sensitivity of the Northeast Rural Poverty, observed in this same period, income growth and change in inequality. The weight of growth and change in inequality in changing the Northeast rural poverty identified that most of the decline in rural poverty is linked to growth in average income. This result coincides with results found by Kraay (2005) for a group of countries

Diferenciais de rendimentos por gênero: uma análise dos efeitos composição e estrutura salarial no Brasil (1976, 1987, 1996 e 2009)

This study aims to analyze the income differentials by gender in Brazil, in the years 1976, 1987, 1996 and 2009. Specifically, there are two objectives. First, attempt to analyze the importance of the effects of composition and wage structure in the job market. In the second, to verify which socioeconomic variables explain the effects of composition and wage structure in the job market. The information in this study was obtained from the microdata of Pesquisa Nacional por Amostra de Domicílios (PNAD) regarding the respective years. In the first stage of the methodology we used: the index of income distribution Theil-T; the income gap decompositions proposed by Oaxaca (1973) and Blinder (1973); and Firpo et al. (2007). In the second stage we applied the RIF regression method (Recentered Influence Function) of Firpo et al. (2007). The results show that income inequality is higher among men than among women in the country. It was observed that the component of inequality between people of the same gender represented the largest share in the decomposition of income inequality between genders. It was found, in the decomposition of the average income, a downward trend of income gap, but the differential remains favorable to the men. We noticed that the impact of the composition effect in reducing the gap was offset by the positive effect of wage structure. Regarding the distribution quantis, income differential between genres appeared greater at the bottom, in the years 1976, 1987 and 2009; and at the top of the distribution, in 1996 featuring, respectively, the sticky floor and glass ceiling effects in Brazil. As for the decomposition of the RIF, it turns out that the composition effect assisted in the downfall of the income gap between 1976 and 2009, but was offset by the positive effect of the wage structure in quantis 10th, 50th, and 90th. The main socioeconomic variables influenced the drop in income gap were: the composition effect, the manual labor occupations, service sector and low-grade and high school, and the wage structure effect, schooling low and high experience professional and technical occupations and urban centers

Um sistema para estimação da vazão de gás de poços produzindo por Plunger Lift para vaso separador de teste em plataformas de petróleo

This work intends to analyze the behavior of the gas flow of plunger lift wells producing to well testing separators in offshore production platforms to aim a technical procedure to estimate the gas flow during the slug production period. The motivation for this work appeared from the expectation of some wells equipped with plunger lift method by PETROBRAS in Ubarana sea field located at Rio Grande do Norte State coast where the produced fluids measurement is made in well testing separators at the platform. The oil artificial lift method called plunger lift is used when the available energy of the reservoir is not high enough to overcome all the necessary load losses to lift the oil from the bottom of the well to the surface continuously. This method consists, basically, in one free piston acting as a mechanical interface between the formation gas and the produced liquids, greatly increasing the well s lifting efficiency. A pneumatic control valve is mounted at the flow line to control the cycles. When this valve opens, the plunger starts to move from the bottom to the surface of the well lifting all the oil and gas that are above it until to reach the well test separator where the fluids are measured. The well test separator is used to measure all the volumes produced by the well during a certain period of time called production test. In most cases, the separators are designed to measure stabilized flow, in other words, reasonably constant flow by the use of level and pressure electronic controllers (PLC) and by assumption of a steady pressure inside the separator. With plunger lift wells the liquid and gas flow at the surface are cyclical and unstable what causes the appearance of slugs inside the separator, mainly in the gas phase, because introduce significant errors in the measurement system (e.g.: overrange error). The flow gas analysis proposed in this work is based on two mathematical models used together: i) a plunger lift well model proposed by Baruzzi [1] with later modifications made by Bolonhini [2] to built a plunger lift simulator; ii) a two-phase separator model (gas + liquid) based from a three-phase separator model (gas + oil + water) proposed by Nunes [3]. Based on the models above and with field data collected from the well test separator of PUB-02 platform (Ubarana sea field) it was possible to demonstrate that the output gas flow of the separator can be estimate, with a reasonable precision, from the control signal of the Pressure Control Valve (PCV). Several models of the System Identification Toolbox from MATLAB® were analyzed to evaluate which one better fit to the data collected from the field. For validation of the models, it was used the AIC criterion, as well as a variant of the cross validation criterion. The ARX model performance was the best one to fit to the data and, this way, we decided to evaluate a recursive algorithm (RARX) also with real time data. The results were quite promising that indicating the viability to estimate the output gas flow rate from a plunger lift well producing to a well test separator, with the built-in information of the control signal to the PCV

Comparison of methodologies for degree-day estimation using numerical methods

O desenvolvimento de projetos relacionados ao desempenho de diversas culturas tem recebido aperfeiçoamento cada vez maior, incorporado a modelos matemáticos sendo indispensável à utilização de equações cada vez mais consistentes que possibilitem previsão e maior aproximação do comportamento real, diminuindo o erro na obtenção das estimativas. Entre as operações unitárias que demandam maior estudo estão aquelas relacionadas com o crescimento da cultura, caracterizadas pela temperatura ideal para o acréscimo de matéria seca. Pelo amplo uso dos métodos matemáticos na representação, análise e obtenção de estimativas de graus-dia, juntamente com a grande importância que a cultura da cana-de-açúcar tem para a economia brasileira, foi realizada uma avaliação dos modelos matemáticos comumente usados e dos métodos numéricos de integração na estimativa da disponibilidade de graus-dia para essa cultura, na região de Botucatu, Estado de São Paulo. Os modelos de integração, com discretização de 6 em 6 h, apresentaram resultados satisfatórios na estimativa de graus-dia. As metodologias tradicionais apresentaram desempenhos satisfatórios quanto à estimativa de grausdia com base na curva de temperatura horária para cada dia e para os agrupamentos de três, sete, 15 e 30 dias. Pelo método numérico de integração, a região de Botucatu, Estado de São Paulo, apresentou disponibilidade térmica anual média de 1.070,6 GD para a cultura da cana-de-açúcar.

Estimação da demanda de instalações elétricas de edificações com múltiplas unidades de consumo

This work aims to predict the total maximum demand of a transformer that will be used in power systems to attend a Multiple Unit Consumption (MUC) in design. In 1987, COSERN noted that calculation of maximum total demand for a building should be different from that which defines the scaling of the input protection extension in order to not overestimate the power of the transformer. Since then there have been many changes, both in consumption habits of the population, as in electrical appliances, so that this work will endeavor to improve the estimation of peak demand. For the survey, data were collected for identification and electrical projects in different MUCs located in Natal. In some of them, measurements were made of demand for 7 consecutive days and adjusted for an integration interval of 30 minutes. The estimation of the maximum demand was made through mathematical models that calculate the desired response from a set of information previously known of MUCs. The models tested were simple linear regressions, multiple linear regressions and artificial neural networks. The various calculated results over the study were compared, and ultimately, the best answer found was put into comparison with the previously proposed model

Avaliação e modelagem reológica de fluido de perfuração base água

The determination of the rheology of drilling fluids is of fundamental importance to select the best composition and the best treatment to be applied in these fluids. This work presents a study of the rheological behavior of some addictives used as viscosifiers in water-based drilling fluids. The evaluated addictives were: Carboxymethylcellulose (CMC), Xanthan gum (GX), and Bentonite. The main objective was to rheologically characterize suspensions composed by these addictives, by applying mathematical models for fluid flow behavior, in order to determine the best flow equation to represent the system, as well as the model parameters. The mathematical models applied in this research were: the Bingham Model, the Ostwald de Wale Model, and the Herschel-Bulkley Model. A previous study of hydration time for each used addictive was accomplished seeking to evaluate the effect of polymer and clay hydration on rheological behavior of the fluid. The rheological characterization was made through typical rheology experiments, using a coaxial cylinder viscosimeter, where the flow curves and the thixotropic magnitude of each fluid was obtained. For each used addictive the rheological behavior as a function of temperature was also evaluated as well as fluid stability as a function of the concentration and kind of addictive used. After analyses of results, mixtures of polymer and clay were made seeking to evaluate the rheological modifications provided by the polymer incorporation in the water + bentonite system. The obtained results showed that the Ostwald de Waale model provided the best fit for fluids prepared using CMC and for fluids with Xanthan gum and Bentonite the best fit was given by the Herschel-Bulkley one

Non-destructive determination of photosynthetic pigments in the leaves of castor oil plants

Objetivou-se com o presente trabalho, estabelecer a relação entre os pigmentos fotossintéticos extraídos em DMSO e as leituras obtidas no clorofilômetro portátil ClorofiLOG® 1030, gerando modelos matemáticos capazes de predizer os teores de clorofila e de carotenóides em folhas de mamoneira. O trabalho foi conduzido na Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) Algodão, situada em Campina Grande, Estado da Paraíba, em outubro de 2010. Para a análise indireta, foi utilizado um equipamento portátil, sendo realizada a leitura em discos foliares com diferentes tonalidades de verde, sendo feita, nesses mesmos discos, a determinação da clorofila pelo método clássico. Para a extração da clorofila, utilizaram-se 5 mL de dimetilsulfóxido (DMSO), a qual foi mantida em banho-maria a 70ºC, por 30 minutos, e retirou-se 3 mL da alíquota para leitura em espectrofotômetro nos comprimentos de onda de 470, 646 e 663 nm. Os dados foram submetidos à análise da variância e regressão polinomial. A leitura obtida no clorofilômetro portátil foi a variável dependente, e os pigmentos fotossintéticos determinados pelo método clássico foi a variável independente. Os resultados indicaram que o clorofilômetro portátil ClorofiLOG® 1030, associado a modelos matemáticos, permitiu estimar a concentração dos pigmentos fotossintéticos, exceto a clorofila b, com alta precisão, com economia de tempo e com reagentes normalmente utilizados nos procedimentos convencionais.

Estudo dos parâmetros de extração de fenol de efluentes aquosos por um tensoativo não iônico

Environmental sustainability has become one of the topics of greatest interest in industry, mainly due to effluent generation. Phenols are found in many industries effluents, these industries might be refineries, coal processing, pharmaceutical, plastics, paints and paper and pulp industries. Because phenolic compounds are toxic to humans and aquatic organisms, Federal Resolution CONAMA No. 430 of 13.05.2011 limits the maximum content of phenols, in 0.5 mg.L-1, for release in freshwater bodies. In the effluents treatment, the liquid-liquid extraction process is the most economical for the phenol recovery, because consumes little energy, but in most cases implements an organic solvent, and the use of it can cause some environmental problems due to the high toxicity of this compound. Because of this, exists a need for new methodologies, which aims to replace these solvents for biodegradable ones. Some literature studies demonstrate the feasibility of phenolic compounds removing from aqueous effluents, by biodegradable solvents. In this extraction kind called "Cloud Point Extraction" is used a nonionic surfactant as extracting agent of phenolic compounds. In order to optimize the phenol extraction process, this paper studies the mathematical modeling and optimization of extraction parameters and investigates the effect of the independent variables in the process. A 32 full factorial design has been done with operating temperature and surfactant concentration as independent variables and, parameters extraction: Volumetric fraction of coacervate phase, surfactant and residual concentration of phenol in dilute phase after separation phase and phenol extraction efficiency, as dependent variables. To achieve the objectives presented before, the work was carried out in five steps: (i) selection of some literature data, (ii) use of Box-Behnken model to find out mathematical models that describes the process of phenol extraction, (iii) Data analysis were performed using STATISTICA 7.0 and the analysis of variance was used to assess the model significance and prediction (iv) models optimization using the response surface method (v) Mathematical models validation using additional measures, from samples different from the ones used to construct the model. The results showed that the mathematical models found are able to calculate the effect of the surfactant concentration and the operating temperature in each extraction parameter studied, respecting the boundaries used. The models optimization allowed the achievement of consistent and applicable results in a simple and quick way leading to high efficiency in process operation.