Sistemas de distribución en entornos de televisión

Actualmente los entornos de televisión manejan gran cantidad de señales procedentes de diferentes fuentes y suministradas en diferentes estándares: SD-SDI,HD-SDI, 3G, DVB-ASI, señales moduladas en banda L. En la gran mayoría de los centros de radiodifusión es necesario al menos en alguno de los pasos del transporte de señales o de su explotación, la replicación de las diferentes señales de entrada a sus diferentes destinos. En el siguiente PFC se tratará de dar a conocer, los principales sistemas que se emplean en los entornos de televisión para la distribución de las señales que se utilizan en los mismos. Los sistemas distributivos se encargan de distribuir y replicar la señal de entrada a ellos hacia diferentes destinos. La principal idea con la que se diseñan estos sistemas es que la señal de entrada no sufra ningún tipo de degradación como fruto de la replicación o división, siendo incluso aconsejable que determinados sistemas regeneren la señal de entrada a sus salidas. El proyecto se divide en tres capítulos: - Capítulo de conceptos teóricos: En el que se presentarán, los fundamentos teóricos que justifican la tecnología utilizada por los diferentes sistemas. - Capítulo de distribución de señales SDI y ASI: En el cual se presentarán los principales sistemas utilizados, para la distribución de señales SD-SDI, HDSDI, 3G y DVB-ASI. - Capítulo de distribución de señales en banda-L: Donde se mostrarán, los principales sistemas de distribución de señales moduladas en banda-L. Al finalizar la lectura del mismo, el lector debería conocer los principales sistemas que se utilizan en la distribución de señales SDI y ASI y en la distribución de señales en banda L. Comprender mediante la teoría expuesta, y los sistemas presentados, las diferentes problemáticas que afrontan los diferentes equipos y la tecnología que subyace en un segundo plano para solventar las problemáticas. Nowadays, broadcast environments, manage an extensive amount of signals from several sources, using differents standards: SD-SDI, HD-SDI, 3G, DVBASI, modulated L band signals. In most of the broadcast infraestructures, it´s usually needed, at any of the transmissions steps, to replicate the source signal to many destinations. This PFC is intended to shown the main systems used to distribute and replicate signals in broadcast environments. Distributive Systems are used to distribute and replicate the source signals to as many destinations as are needed. The main idea behind the design of those systems is to preserve the integrity of the original signal, due to replications or division classical pathologies. Even it is recomendad that those systems are able to regenerate the original signal, trying to avoid or compesate those pathologies. The PFC is divided in three chapters: - Chapter 1: Theorical concepts: In this chapter is presented the minimal theory needed to understand the complex of the tecnology, for those distributive systems. - Chapter 2: Distribution of SDI and ASI signals: It is shown the main systems used to replicate and distribution of the SDI and ASI signals. It will also treatment the state of the art of the actually new systems. - Chapter 3: Distribution of L band signals. It will be shown the main systems used for L band signals At the end of reading this PFC, the reader must known the main systems used for distribution SDI and ASI signals, also L band signals. It is important to understand the contents of the PFC, the systems, the several problems and the background tecnology that is needed to afront the replication known patologies.

A bacterial cysteine protease effector protein interferes with photosynthesis to suppress plant innate immune responses

The bacterial pathogen Pseudomonas syringae pv tomato DC3000 suppresses plant innate immunity with effector proteins injected by a type III secretion system (T3SS). The cysteine protease effector HopN1, which reduces the ability of DC3000 to elicit programmed cell death in non-host tobacco, was found to also suppress the production of defence-associated reactive oxygen species (ROS) and callose when delivered by Pseudomonas fluorescens heterologously expressing a P. syringae T3SS. Purified His 6 -tagged HopN1 was used to identify tomato PsbQ, a member of the oxygen evolving complex of photosystem II (PSII), as an interacting protein. HopN1 localized to chloroplasts and both degraded PsbQ and inhibited PSII activity in chloroplast preparations, whereas a HopN1 D299A non-catalytic mutant lost these abilities. Gene silencing of NtPsbQ in tobacco compromised ROS production and programmed cell death.

Desarrollo e implementación de un sistema robótico aéreo con programación tridimensional orientado al recorrido de rutas

En la actualidad se estudia en numerosos campos cómo automatizar distintas tareas ejecutadas por aeronaves con tripulación humana. Estas tareas son en todos los casos muy costosos, debido al gran consumo de combustible, gran coste de adquisición y mantenimiento de la propia aeronave, todo ello sin contar el riesgo para los mismos tripulantes. Como ejemplo de estas tareas se puede incluir la vigilancia policial y fronteriza, revisiones de tendidos de alta tensión, la alerta temprana de incendios forestales y la medición de parámetros contaminantes. El objetivo de este proyecto es el diseño y la construcción de un prototipo electrónico empotrado basado en microcontrolador con núcleo C8051 de Silicon labs, que sea capaz de gobernar una aeronave de radiocontrol de forma transparente, de manera que en un futuro se pueda sustituir el propio aeromodelo, con la modificación de algunos parámetros, para poder incorporar sistemas de video o distintos medios de detección de variables. El prototipo seguirá una ruta confeccionada y transferida como un archivo de texto con un formato determinado que contendrá los datos necesarios para poder navegar mediante GPS. El trabajo con los modelos de motorización térmica (motores de combustión interna tipo glow, en este caso) resulta peligroso debido a la gran energía que son capaces de alcanzar. A fin de mantener la máxima seguridad durante la evolución del proyecto, se ha diseñado un proceso de tres partes independientes que permitan la correcta familiarización de los distintos componentes que se emplearán. Las fases son las siguientes: 1. Test y modelado de todos los componentes mediante pequeños montajes con protoboard de inserción y programas individuales. Se realizará mediante una tarjeta multipropósito que contendrá un microcontrolador similar en características, aunque de menor complejidad, al del prototipo final. 2. Integración de todos los componentes mediante una tarjeta especialmente diseñada que servirá de interfaz entre la tarjeta multipropósito y todo el hardware necesario para el control de un vehículo terrestre de iguales características (actuadores y motorización) al aeromodelo. 3. Diseño de un sistema embebido que concentre todos los subsistemas desarrollados en las fases anteriores y que integre todos los componentes necesarios para el gobierno de una aeronave de ala fija. ABSTRACT. Nowadays, the way of automating different tasks done by manned vehicles is studied. These tasks are any case very expensive, due to large fuel consumption, costs of aircraft buying, without taking into account the risk for human crew. As an example of these tasks, we can include policing or border surveillance, maintenance of high voltage lines, early warning of forest fire and measuring of pollution parameters. The target of this project is the design and construction of an embedded electronic prototype, based on a microcontroller with C8051 core from Silicon labs, and it will be able to controlling an aircraft transparently, in order that in the future the flying model could be changed with the modification of some parameters, and video or any variables detection systems could be added. The prototype will follow a designed and transferred path as an plain text file with a given format, that will contain all the necessary data for GPS navigation. Working with heat engine models (internal combustion engine, glow type, in this case) becomes dangerous due to the large energy that can be able to acquire. In order to keep the maximum safety level during the project evolution a three independent stages process have been designed, this allows familiarizing properly with the parts that will be used. The stages are as follows: 1. Test and modeling of all of the parts by little assemblies with through-hole protoboard and stand alone programs. It will be done with a multipurpose card which contains a microcontroller of similar characteristics, although less complex, of the final prototype. 2. Integrating of all of parts through a dedicated design card that will serve as interface between multipurpose card and all the necessary hardware for controlling a ground vehicle with the same characteristics (actuators and engine) of the flying model. 3. Embedded system designing that contains all the developed subsystems in the previous stages and integrates all the necessary parts for controlling a fixed-wing aircraft.

Técnicas y materiales de la construcción fortificada altomedieval en el centro de la Península Ibérica: métodos de análisis a través de la arqueología y la historia de la construcción

Esta tesis doctoral tiene como objeto el acercamiento histórico-constructivo a la realidad material de las fortificaciones edificadas en el centro de la Península Ibérica durante los primeros siglos de la Edad Media. El marco geográfico se extiende desde el cauce del río Duero, delimitado por los valles de sus afluentes, el Duratón, al oeste, y el Escalote al este, hasta las cumbres del Sistema Central oriental en su entronque con el Ibérico, para descender por la falda sur de la sierra hasta los valles altos del Lozoya, Jarama y Henares. Siguiendo las demarcaciones actuales, el marco de estudio ocupa parcialmente las provincias de Soria, Guadalajara, Madrid, Segovia, Burgos y Valladolid. Desde un punto de vista cronológico, el espacio temporal se inicia con la conquista musulmana de la Península Ibérica de 711 y culmina con la incorporación definitiva al reino de Castilla de las zonas estudiadas, en torno al año 1150. Se trata de un espacio de transición, tanto desde el punto de vista social como ecológico. Los territorios al sur de la sierra correspondían a los confines septentrionales de la Marca Media de al-Andalus, mientras que la falta norte, los extrema durii, fueron un territorio escasamente poblado y desorganizado, foco de la expansión de los reinos de León y Castilla y zona de conflicto con al-Andalus a principios del siglo X. Un territorio tan amplio y heterogéneo, unido a una compleja evolución histórica y social y la parquedad de las fuentes escritas, ha necesitado de un acercamiento con una metodología de tipo mixto, en la que han convergido las técnicas propias de la documentación histórica, de la arqueología y de la historia de la construcción. Esta metodología parte de un exhaustivo vaciado bibliográfico, tras lo cual se planteó una prospección arqueológica dirigida que permitió realizar un catálogo de elementos fortificados en el área de estudio susceptibles de contener fases altomedievales. Sobre cada uno de los elementos localizados se realizó una toma de datos de tipo gráfico métrico y constructivo. Cruzando los datos recabados en cada edificio con técnicas propias de la estratigrafía e historia de la construcción se identificaron y aislaron las fases de la cronología analizada. Entre las fortificaciones que evidenciaron fases altomedievales y atendiendo a su singularidad, representatividad y calidad estratigráfica se ha profundizado en el análisis de nueve casos de estudio: el conjunto fortificado de Atienza, el castillo de Cogolludo, el recinto amurallado de Buitrago de Lozoya, el castillo de Caracena, la iglesia parroquial de la Inmaculada Concepción de Mezquetillas, la alcazaba de Gormaz, la torre de San Andrés de Sepúlveda, la iglesia parroquial de San Miguel de Ayllón y la fortificación rupestre de Alcolea de las Peñas. La investigación ha servido para dos fines principales. El primero se centra en el aspecto material. En este sentido no solo se ha identificado la presencia o ausencia de fases altomedievales en cado uno de los edificio lo que ha permitido realizar una lectura territorial, la caracterización de las diferentes técnicas y materiales constructivos y valorar la posibilidad de establecer una cronotipología. El segundo se centra en aspectos históricos y sociales. La vinculación de estos restos materiales con la documentación histórica ha devenido en un medio para conocer la historia de las gentes que construyeron estos edificios, la motivación que les llevó a emprender tales proyectos, así como el contexto en el que cada una de estas fortificaciones desempeñó las funciones para las que fue creada. Este estudio ha puesto de manifiesto la ruptura que supuso la ocupación estatal de esta zona por parte del ejército cordobés desde mediados del siglo X, tanto desde el punto de vista social como constructivo. Se ha podido documentar materialmente esta ocupación tras la restauración de Medinaceli, en torno a 946, y la sucedida tras la toma de Sepúlveda por parte de Almanzor en 984, diferenciándose claramente las técnicas constructivas propias de este momento, ejecutadas directamente por talleres foráneos, procedentes de Córdoba y Toledo. La posición estratigráfica de estas fábricas diagnósticas ha permito identificar fases constructivas inmediatamente anteriores y posteriores a este momento. También se ha podido comprobar la hipótesis inicial en relación a la pérdida de conocimientos constructivos durante el final de la Antigüedad y los primeros siglos del medievo en la zona estudiada. La sillería y la explotación de canteras, así como el ciclo productivo del ladrillo por completo, son recuperados sin recurrir a un sustrato tecnológico local, propiciados de manera efímera por la ocupación califal. Cuando se produce el desmembramiento del califato a partir del año 1010 estas técnicas se vuelven a abandonar. A finales del siglo XI y principios del siglo XII se produce un nuevo cambio en la construcción, recuperándose de nuevo estas técnicas de la mano del románico y del establecimiento de la red parroquial diocesana. En una zona y periodo histórico apenas explotado por la investigación, esta tesis doctoral busca no solo establecer una metodología de trabajo sino sentar las bases para futuros estudios, tanto desde el punto de vista particular, profundizando en el estudio constructivo y estratigráfico de cada uno de los elementos recogidos, como en otros aspectos más trasversales. ABSTRACT This doctoral thesis has a constructive historical material approach to the reality of the fortifications built in the center of the Iberian Peninsula during the first centuries of the middle Ages. The geographical framework extends from the Duero´s riverbed, bounded by the valleys of its tributaries, the Duratón on the west, and the Escalote on the east, until to the peaks of the eastern Central System at its connection with the Iberian, to descend the hillside of the mountain range to the high valleys of Lozoya, Jarama and Henares. Following the current demarcations under this framework study, partially cover the provinces of Soria, Guadalajara, Madrid, Segovia, Burgos and Valladolid. From a chronological point of view, the temporal space began with the Muslim conquest of the Iberian Peninsula in 711 A.D and ends with the final incorporation into the Kingdom of Castile in the studied areas, around the year 1150 A.D. It is a transitional gathering point, both socially and ecologically. The southern territories of the Sierra or mountain range corresponded to the northern boundaries of the Middle mark of al- Andalus , while the northern missing, the extrema Durii , were a disorganized sparsely populated territory and point of the expansion of the kingdoms of Leon and Castile and zone of conflict with al- Andalus at the beginning of the tenth century. Such a wide and diverse territory, connected with a complex historical, social evolution and the lack of written sources , has required an approach with a mixed type methodology, which have converged the techniques of historical documentation of the archeology and building history. This methodology comes from a comprehensive bibliographic study, after which an archaeological survey was directed that allowed building a fortified elements ‘catalog in the study area likely to contain high medieval period phases were raised. On each of the elements located one metric data collection and constructive graphic type was performed. Checking against the data collected in each building with its own history of stratigraphy and construction techniques and finally, they were identified and isolated the timing analysis phases. Among the early medieval fortifications that showed high period Medieval phases and according to its uniqueness , representativeness and stratigraphy’s quality of the nine case studies : the fortified complex of Atienza, Cogolludo Castle, the Buitrago de Lozoya´s walled enclosure , the Caracena´s castle , the Mezquetillas´ parish church, the Gormaz´s fortress, the San Andres toser in Sepulveda, the church of San Miguel de Ayllón and the Alcolea de las Peñas´ rock fortress. This research study has served two main purposes. The first focuses on the material side. In this sense it does not only identified the presence or absence of early medieval period phases in each one of the building, which has allowed a territorial reading and the characterization of the different construction techniques and materials, but it also assess the possibility of establishing a chrono–typology. The second focuses on historical and social aspects. The bound of these materials remains with the historical documentation has become a means to know the history of the people who built these buildings, the motivation that led them to undertake such projects as well as the context in which each of these fortifications played the functions for which it was created. This study has revealed the breach that led to the state occupation of the Cordovan army in this area by since mid-tenth century, from the social point of view and also from the structural one. It has been materially document this occupation after the restoration of Medinaceli, around 946, and succeeded after taking Sepulveda by Almanzor in 984, clearly differentiating their own building techniques currently implemented directly by foreign workshops, from Cordova and Toledo. The stratigraphic position of these factories has made it possible to identify earlier and later construction phases at this time. It has also been able to verify the initial hypothesis in relation with constructive knowledge loss during late antiquity and early medieval centuries in the studied area. Also ashlar, masonries as well as the brick production is recovered without resorting to a local technological substrate, fleetingly brought about by the Caliphate occupation. When the dismemberment of the Caliphate is produced from the year 1010 these techniques were abandoned again. In the late eleventh and early twelfth century these techniques are recovered from Romanesque and a new change came, also from the establishment of the diocesan parish network. In one historical period that has been hardly exploited by research, this thesis seeks not only to establish a working methodology but lay the groundwork for future studies, both from the particular point of view, paying special attention in the constructive and stratigraphic studies of each of the evidence collected , and additionally in other more transversal aspects.

Peter Celsing en el complejo de Sergels Torg : la Casa de la Cultura de Estocolmo

La tesis ≪Peter Celsing en el complejo de Sergels torg. La Casa de la Cultura de Estocolmo ≫ intenta profundizar en la obra de este autor, en sus conexiones con otras arquitecturas y arquitectos de su entorno físico y temporal, que constituye uno de los episodios más interesantes y menos conocidos de la arquitectura nórdica. El objeto particular de estudio es la Casa de la Cultura dentro del complejo de Sergels torg como pieza clave que marca un antes y un después en su trayectoria. Se observa un proceso de desarrollo constante, que se fue gestando paulatinamente, y que en este ejercicio alcanza su punto álgido. Además, los proyectos que coexistieron con su evolución, y los posteriores, filtraron las inquietudes latentes del mayor reto al que se había enfrentado, dando pie a resultados novedosos en su producción. La investigación se estructura en tres capítulos. El primero, ≪Aprendizaje≫, examina sus experiencias de juventud, viajes de estudios y lecciones de sus maestros; así como sus inicios profesionales en el proyecto de restauración de la Catedral de Uppsala y en sus iglesias junto a Lewerentz. En ese periodo prima lo formal y escultórico, el hormigón y el ladrillo artesanal, y como referencia Le Corbusier y la capilla de Ronchamp. El segundo capítulo, ≪Obra≫, estudia el concurso que da origen a la Casa de la Cultura, su proceso de gestación y diseño, y las modificaciones posteriores durante su construcción. De repente emergen las cualidades espaciales y los sistemas estructurales aprendidos de Mies en el Crown Hall de Chicago, la gran escala de la metrópoli y las soluciones industriales ligeras. El tercer capítulo, ≪Madurez≫, sirve de cierre, y revisa su trayectoria posterior con relación a la obra referida. Tras este edificio, el diseño de las propuestas coetáneas se vuelve más abstracto y sencillo, gana en autonomía, rotundidad, atrevimiento y carácter. Las conclusiones verifican el cambio de actitud y de paradigmas. Hay elementos como las distorsiones, los contrastes y las manipulaciones, aprendidas en sus primeros años de formación y junto a Lewerentz, si bien es cierto que ahora han aumentado proporcionalmente a la escala de sus intervenciones e incluso se observan en el detalle, como sucede en el encuentro de los materiales y su montaje. Su visión, su punto de vista se eleva, y la pieza adopta una volumetría compacta y unitaria. Cada nuevo trabajo sintetiza un enfoque más universal y abierto en conceptos y metodología operativa. Sus preocupaciones nos hablan de un arquitecto consciente de su tiempo y cuya arquitectura final mira ya al siglo XXI. ABSTRACT The thesis ≪Peter Celsing in the complex of Sergels torg. The House of Culture in Stockholm ≫ delves deeper into the work of this author, in his connections with other architectures and architects of his physical and temporal surroundings, which is one of the most interesting and least known episodes of Nordic architecture. The particular focus of this study is how the House of Culture, a key point within the complex of Sergels torg, marks a before and after in his career. There is an observable process of constant development, which was growing steadily, and reaches its critical point in this exercise. In addition, the projects that coexisted during his evolution and those that came before, reveal latent concerns leading up to the biggest challenge he would face, ultimately giving way to new developments in his work. The study is divided into three chapters. The first, ≪Learning≫, examines his experiences as a youth, academic trips and lessons from his masters; as well as his professional beginnings alongside Lewerentz in the restoration project of Uppsala Cathedral and his churches. In that period the formal and sculptural were given preference, also concrete and handmade brick. And as reference, there is Le Corbusier and the chapel at Ronchamp. The second chapter, ≪Work≫, studies the competition that gives rise to the House of Culture, the gestation process and design and subsequent amendments during its construction. Suddenly the spatial qualities and structural systems learned from Mies in Crown Hall of Chicago emerge, the large scale of the metropolis and light industrial solutions. The third chapter, ≪Maturity≫, serves as the closure and examines his subsequent career in relation to said work. After this building, the design of coetaneous proposals become more abstract and simple, gaining autonomy, firmness, boldness and character. The conclusions verify the change in attitudes and paradigms. There are elements such as distortions, contrasts and manipulations, learned in his early years of training and with Lewerentz, that have now undeniably increased in proportion to the scale of their involvement and can even be observed in detail, as so happens in the joining of materials and assembly. His vision, his point of view is heightened, and the piece adopts a single and compact volume. Each new work synthesizes a more universal and open focus in concepts and operational methodology. His concerns speak of an architect aware of his time and whose final architecture now looks toward the 21st century.

Wheat allergy in celiac children

Gluten is the main structural protein complex of wheat with equivalent toxic proteins found in other cereals (rye, barley, and oats) which are responsible for different immunologic responses with different clinical expressions of disease. The spectrum of gluten-related disorders has been classified according to pathogenic, clinical, and epidemiological differences in three main forms: (i) wheat allergy (WA), an IgE-mediated disease; (ii) autoimmune disease, including celiac disease (CD), dermatitis herpetiformis, and gluten ataxia; and (iii) possibly immune-mediated, gluten sensitivity [1]. WA is an immunologic Th2 response with typical manifestations which can vary from dermatological, respiratory, and/or intestinal to anaphylactic reactions. In contrast, CD is an autoimmune disorder, a gliadin-specific T-cell response which is enhanced by the action of intestinal tissue transglutaminase (tTG), with a wide clinical spectrum including symptomatic cases with either intestinal (e.g., chronic diarrhea, weight loss) or extraintestinal features (e.g., anemia, osteoporosis, neurologic disturbances) and silent forms that are occasionally discovered as a result of serological screening [1]. We studied wheat allergy in two children with early diagnosis of CD, who developed immediate allergic symptoms after eating small amounts of wheat flour.

A INTERPRETAÇÃO DA SIMBÓLICA DA QUEDA EM PAUL TILLICH:Um Estudo em Hermenêutica Teológica

A Dissertação busca compreender e julgar criticamente a hermenêutica teológica de Paul Tillich, a partir do estudo de sua interpretação simbólica da doutrina cristã clássica do pecado, em sua forma protestante-agostiniana. O trabalho se desenvolve em três etapas: primeiramente é apresentada a teoria do símbolo religioso de Paul Tillich. Em seguida, a sua interpretação da doutrina do pecado, presente no complexo de símbolos míticos e conceptuais que foram reunidos sob o nome simbólica da Queda . Na terceira e última parte, a partir de uma avaliação da prática hermenêutica de Tillich seguida de uma discussão com seus críticos, especialmente William Alston e Reinhold Niebuhr, e de um diálogo especial com Paul Ricoeur, o autor conclui: tanto a teoria do símbolo de Tillich como o seu enfoque hermenêutico, que vai principalmente da analítica existencial ao símbolo, necessitam de aperfeiçoamento; e a teoria simbólica de Ricoeur, associada à sua proposta indutiva de reflexão hermenêutica fornece uma importante contribuição. Ao mesmo tempo, o sucesso de Tillich na interpretação da simbólica da Queda parece refutar a tese de Ricoeur de que uma abordagem que parte da ontologia para o símbolo é inadequada por princípio. Conclui-se, portanto, que a abordagem de Tillich é válida, mas que precisa ser complementada; é necessário pensaruma hermenêutica de mão dupla , que dê igual voz aos símbolos religiosos e à ontologia existencial.(AU)

A INTERPRETAÇÃO DA SIMBÓLICA DA QUEDA EM PAUL TILLICH:Um Estudo em Hermenêutica Teológica

A Dissertação busca compreender e julgar criticamente a hermenêutica teológica de Paul Tillich, a partir do estudo de sua interpretação simbólica da doutrina cristã clássica do pecado, em sua forma protestante-agostiniana. O trabalho se desenvolve em três etapas: primeiramente é apresentada a teoria do símbolo religioso de Paul Tillich. Em seguida, a sua interpretação da doutrina do pecado, presente no complexo de símbolos míticos e conceptuais que foram reunidos sob o nome simbólica da Queda . Na terceira e última parte, a partir de uma avaliação da prática hermenêutica de Tillich seguida de uma discussão com seus críticos, especialmente William Alston e Reinhold Niebuhr, e de um diálogo especial com Paul Ricoeur, o autor conclui: tanto a teoria do símbolo de Tillich como o seu enfoque hermenêutico, que vai principalmente da analítica existencial ao símbolo, necessitam de aperfeiçoamento; e a teoria simbólica de Ricoeur, associada à sua proposta indutiva de reflexão hermenêutica fornece uma importante contribuição. Ao mesmo tempo, o sucesso de Tillich na interpretação da simbólica da Queda parece refutar a tese de Ricoeur de que uma abordagem que parte da ontologia para o símbolo é inadequada por princípio. Conclui-se, portanto, que a abordagem de Tillich é válida, mas que precisa ser complementada; é necessário pensaruma hermenêutica de mão dupla , que dê igual voz aos símbolos religiosos e à ontologia existencial.(AU)

CARACTERÍSTICAS PSICOSSOCIAIS E DE PERSONALIDADE DE ADOLESCENTES INFRATORES EM CUMPRIMENTO DE MEDIDA SOCIOEDUCATIVA

Para atingir os objetivos propostos, ou seja, levantar e descrever indicadores socioculturais de uma amostra de adolescentes em cumprimento de medida socioeducativa, e descrever características psicológicas e de personalidade dos adolescentes infratores, num estudo que pesquisou adolescentes em cumprimento de medida socioeducativa. O trabalho foi realizado em duas as etapas: na primeira, os 47 adolescentes participaram de uma entrevista semidirigida; na segunda, dez desses adolescentes foram selecionados e submetidos a um instrumento projetivo para investigação de aspectos da personalidade: o “desenho da Figura Humana” de Machower, adaptado por Van Kolck (1956; 1984). A discussão teórica dos resultados baseou-se numa abordagem psicanalítica pós-freudiana para a compreensão da adolescência tanto como fase do desenvolvimento humano como dos comportamentos antissociais. Os resultados do estudo corroboraram a teoria advinda da literatura psicológica que aborda padrões comuns no período da adolescência, fase em que ocorre um complexo de fatores individuais da maturidade biológica associados ao meio social/cultural e que, por sua vez, estabelecem relações com as instâncias psicológicas ou psíquicas do sujeito junto com as características específicas de cada indivíduo. Na busca da compreensão desses padrões comuns da amostra dos adolescentes infratores utilizados no presente estudo, foram levantados dados do perfil psicossocial, cultural e demográfico; dos aspectos psicossociais e aspectos psicodinâmicos e de características de personalidade. A título de conclusão, o estudo destacou a problemática do adolescente em conflito com a lei, associada às questões sociais, de saúde mental, além do desenvolvimento psíquico, sinalizando a necessidade de ações psicoprofiláticas voltadas para população infantil, jovem, agrupamentos familiares e para a comunidade que representa seu entorno.

NADH-quinone oxidoreductase: PSST subunit couples electron transfer from iron–sulfur cluster N2 to quinone

The proton-translocating NADH-quinone oxidoreductase (EC 1.6.99.3) is the largest and least understood enzyme complex of the respiratory chain. The mammalian mitochondrial enzyme (also called complex I) contains more than 40 subunits, whereas its structurally simpler bacterial counterpart (NDH-1) in Paracoccus denitrificans and Thermus thermophilus HB-8 consists of 14 subunits. A major unsolved question is the location and mechanism of the terminal electron transfer step from iron–sulfur cluster N2 to quinone. Potent inhibitors acting at this key region are candidate photoaffinity probes to dissect NADH-quinone oxidoreductases. Complex I and NDH-1 are very sensitive to inhibition by a variety of structurally diverse toxicants, including rotenone, piericidin A, bullatacin, and pyridaben. We designed (trifluoromethyl)diazirinyl[3H]pyridaben ([3H]TDP) as our photoaffinity ligand because it combines outstanding inhibitor potency, a suitable photoreactive group, and tritium at high specific activity. Photoaffinity labeling of mitochondrial electron transport particles was specific and saturable. Isolation, protein sequencing, and immunoprecipitation identified the high-affinity specifically labeled 23-kDa subunit as PSST of complex I. Immunoprecipitation of labeled membranes of P. denitrificans and T. thermophilus established photoaffinity labeling of the equivalent bacterial NQO6. Competitive binding and enzyme inhibition studies showed that photoaffinity labeling of the specific high-affinity binding site of PSST is exceptionally sensitive to each of the high-potency inhibitors mentioned above. These findings establish that the homologous PSST of mitochondria and NQO6 of bacteria have a conserved inhibitor-binding site and that this subunit plays a key role in electron transfer by functionally coupling iron–sulfur cluster N2 to quinone.

Two binding modes reveal flexibility in kinase/response regulator interactions in the bacterial chemotaxis pathway

The crystal structure at 2.0-Å resolution of the complex of the Escherichia coli chemotaxis response regulator CheY and the phosphoacceptor-binding domain (P2) of the kinase CheA is presented. The binding interface involves the fourth and fifth helices and fifth β-strand of CheY and both helices of P2. Surprisingly, the two heterodimers in the asymmetric unit have two different binding modes involving the same interface, suggesting some flexibility in the binding regions. Significant conformational changes have occurred in CheY compared with previously determined unbound structures. The active site of CheY is exposed by the binding of the kinase domain, possibly to enhance phosphotransfer from CheA to CheY. The conformational changes upon complex formation as well as the observation that there are two different binding modes suggest that the plasticity of CheY is an essential feature of response regulator function.

MgATP activates the β cell KATP channel by interaction with its SUR1 subunit

ATP-sensitive potassium (KATP) channels in the pancreatic β cell membrane mediate insulin release in response to elevation of plasma glucose levels. They are open at rest but close in response to glucose metabolism, producing a depolarization that stimulates Ca2+ influx and exocytosis. Metabolic regulation of KATP channel activity currently is believed to be mediated by changes in the intracellular concentrations of ATP and MgADP, which inhibit and activate the channel, respectively. The β cell KATP channel is a complex of four Kir6.2 pore-forming subunits and four SUR1 regulatory subunits: Kir6.2 mediates channel inhibition by ATP, whereas the potentiatory action of MgADP involves the nucleotide-binding domains (NBDs) of SUR1. We show here that MgATP (like MgADP) is able to stimulate KATP channel activity, but that this effect normally is masked by the potent inhibitory effect of the nucleotide. Mg2+ caused an apparent reduction in the inhibitory action of ATP on wild-type KATP channels, and MgATP actually activated KATP channels containing a mutation in the Kir6.2 subunit that impairs nucleotide inhibition (R50G). Both of these effects were abolished when mutations were made in the NBDs of SUR1 that are predicted to abolish MgATP binding and/or hydrolysis (D853N, D1505N, K719A, or K1384M). These results suggest that, like MgADP, MgATP stimulates KATP channel activity by interaction with the NBDs of SUR1. Further support for this idea is that the ATP sensitivity of a truncated form of Kir6.2, which shows functional expression in the absence of SUR1, is unaffected by Mg2+.

Proof for a nonproteinaceous calcium-selective channel in Escherichia coli by total synthesis from (R)-3-hydroxybutanoic acid and inorganic polyphosphate

Traditionally, the structure and properties of natural products have been determined by total synthesis and comparison with authentic samples. We have now applied this procedure to the first nonproteinaceous ion channel, isolated from bacterial plasma membranes, and consisting of a complex of poly(3-hydroxybutyrate) and calcium polyphosphate. To this end, we have now synthesized the 128-mer of hydroxybutanoic acid and prepared a complex with inorganic calcium polyphosphate (average 65-mer), which was incorporated into a planar lipid bilayer of synthetic phospholipids. We herewith present data that demonstrate unambiguously that the completely synthetic complex forms channels that are indistinguishable in their voltage-dependent conductance, in their selectivity for divalent cations, and in their blocking behavior (by La3+) from channels isolated from Escherichia coli. The implications of our finding for prebiotic chemistry, biochemistry, and biology are discussed.

MRIT, a novel death-effector domain-containing protein, interacts with caspases and BclXL and initiates cell death

Activation of the cascade of proteolytic caspases has been identified as the final common pathway of apoptosis in diverse biological systems. We have isolated a gene, termed MRIT, that possesses overall sequence homology to FLICE (MACH), a large prodomain caspase that links the aggregated complex of the death domain receptors of the tumor necrosis factor receptor family to downstream caspases. However, unlike FLICE, the C-terminal domain of MRIT lacks the caspase catalytic consensus sequence QAC(R/Q)G. Nonetheless MRIT activates caspase-dependent death. Using yeast two-hybrid assays, we demonstrate that MRIT associates with caspases possessing large and small prodomains (FLICE, and CPP32/YAMA), as well as with the adaptor molecule FADD. In addition, MRIT simultaneously and independently interacts with BclXL and FLICE in mammalian cells. Thus, MRIT is a mammalian protein that interacts simultaneously with both caspases and a Bcl-2 family member.

Structural evidence for a second sialic acid binding site in avian influenza virus neuraminidases

The x-ray structure of a complex of sialic acid (Neu5Ac) with neuraminidase N9 subtype from A/tern/Australia/G70C/75 influenza virus at 4°C has revealed the location of a second Neu5Ac binding site on the surface of the enzyme. At 18°C, only the enzyme active site contains bound Neu5Ac. Neu5Ac binds in the second site in the chair conformation in a similar way to which it binds to hemagglutinin. The residues that interact with Neu5Ac at this second site are mostly conserved in avian strains, but not in human and swine strains, indicating that it has some as-yet-unknown biological function in birds.