Mechanisms of a change in the refractive index of an intensely pumped Yb:YAG crystal

Mechanisms of a change in the refractive index appearing in an intensely diode-pumped Yb:YAG-laser disk element are studied with the help of polarisation interferometry and dynamic grating testing. It is found that changes in the electronic component of the refractive index arising upon changing the populations of electronic levels of Yb ions (the ground F state and the upper F level of the laser transition) and caused by the difference in the polarisability of these levels are an order of magnitude greater than thermal changes in the refractive index. It is shown that the difference Δp in the polarisability at the probe wavelength of 633 nm is 1.9 × 10 cm and at the laser transition wavelength of 1029 nm is 1.6 × 10 cm. ©2006 Kvantovaya Elektronika and Turpion Ltd.

Pain response in patients undergoing panretinal photocoagulation by continuos wave Nd-YAG laser

Purpose: Current panretinal laser photocoagulative parameters are based on the Diabetic Retinopathy Study, which used exposures of 0.1 - 0.5 second to achieve moderate intensity retinal burns. Unfortunately, many patients find these settings painful. We wanted to investigate whether reducing exposure time and increasing power to give the same endpoint, is more comfortable and effective. Methods: 20 patients having panretinal photocoagulation for the first time underwent random allocation to two forms of laser treatment: half of the retinal area scheduled for treatment was treated with Green Yag laser with conventional parameters {exposure time 0.1 second (treatment A), power density sufficient to produce a visible grey - white burns}. The other half treated with shorter exposure 0.02 second (treatment B). All patient were asked to evaluate severity of pain on a visual analogue scale ranging from 0 - 10 (0 = no pain, 10 = most severe pain). All patients were masked as to the type of treatment. The order of carrying out the treatment on each patient was randomised. Fundus photographs were taken of each hemifundus to confirm treatment. Results: Of the 20 patients, 17 had proliferative diabetic retinopathy, 2 had ischaemic central retinal vein occlusion and one had ocular ischaemic syndrome. The average pain response to treatment A was 5.11 on a visual analogue scale with a mean power of 0.178 Watt; the average pain response to treatment B was 1.40 with a mean power of 0.489 Watt. Short exposure laser burns were significantly less painful (P < 0.001). Conclusion: Shortening exposure time with increased power is more comfortable for patients undergoing panretinal photocoagulation than conventional parameters.

June Sutor and the C-H…O hydrogen bonding controversy

In 1962, D. June Sutor published the first crystallographic analysis of C–H…O hydrogen bonding based on a selection of structures then known. Her follow-up paper the next year cited more structures and provided more details, but her ideas met with formidable opposition. This review begins by describing knowledge of C-H…O hydrogen bonding available at the time from physico-chemical and spectroscopic studies. By comparison of structures cited by Sutor with modern redeterminations, the soundness of her basic data set is assessed. The plausibility of the counter-arguments against her is evaluated. Finally, her biographical details are presented along with consideration of factors that might have impeded the acceptance of her work. © 2012 Taylor & Francis.

Generation of 49-fs pulses directly from distributed Kerr-lens mode-locked Yb:YAG thin-disk oscillator

The concept of distributed Kerr-lens mode-locking and a thin-disk Yb:YAG oscillator based on this concept are presented. The described oscillator directly generates pulses with a duration of 49 fs and spectral width of 33 nm

Climate change adaptation planning under uncertainty in Ho Chi Minh City, Vietnam: a case study on institutional vulnerability, adaptive capacity and climate change governance

Climate change is expected to have wide-ranging impacts on urban areas and creates additional challenges for sustainable development. Urban areas are inextricably linked with climate change, as they are major contributors to it, while also being particularly vulnerable to its impacts. Climate change presents a new challenge to urban areas, not only because of the expected rises in temperature and sea-level, but also the current context of failure to fully address the institutional barriers preventing action to prepare for climate change, or feedbacks between urban systems and agents. Despite the importance of climate change, there are few cities in developing countries that are attempting to address these issues systematically as part of their governance and planning processes. While there is a growing literature on the risks and vulnerabilities related to climate change, as yet there is limited research on the development of institutional responses, the dissemination of relevant knowledge and evaluation of tools for practical planning responses by decision makers at the city level. This thesis questions the dominant assumptions about the capacity of institutions and potential of adaptive planning. It argues that achieving a balance between climate change impacts and local government decision-making capacity is a vital for successful adaptation to the impacts of climate change. Urban spatial planning and wider environmental planning not only play a major role in reducing/mitigating risks but also have a key role in adapting to uncertainty in over future risk. The research focuses on a single province - the biggest city in Vietnam - Ho Chi Minh City - as the principal case study to explore this argument, by examining the linkages between urban planning systems, the structures of governance, and climate change adaptation planning. In conclusion it proposes a specific framework to offer insights into some of the more practical considerations, and the approach emphasises the importance of vertical and horizontal coordination in governance and urban planning.

Optimización de parámetros y modelación matemática del proceso de soldadura por láser de disco de diodos YB:YAG, aplicado en aceros avanzados AHSS

La aplicación del uso de la tecnología láser para la unión de materiales se ha incrementado sustancialmente en la industria metal-mecánica, esto se atribuye principalmente a las diferentes ventajas que tiene este proceso sobre los procesos de soldadura convencionales, como son la reducción en el costo de procesamiento, aumento de la productividad, incremento de la calidad del producto, la reducción de las zonas afectadas por el calor, la reducción de la distorsión en la piezas soldadas y además la versatilidad que representa la soldadura láser por ser un proceso sin contacto. No obstante el uso del láser para la unión de materiales en México se considera todavía una tecnología emergente, son muy pocas las industrias que han migrado de los procesos de soldadura convencionales al proceso de unión de materiales por rayo láser. Una de las industrias que ha empezado a utilizar el proceso de soldadura por láser en México, es la automotriz, en la cual constantemente se está buscado evitar un rezago tecnológico en los procesos de conformado y soldadura de piezas metálicas. Sin embargo en la actualidad, en la industria automotriz mexicana existe una gran dependencia de expertos de otros países para la supervisión, atención y el control de los procesos avanzados, como lo es el de la soldadura láser.En este trabajo, para lograr una mayor comprensión del proceso y del efecto de sus variables, se propuso aplicar una metodología de optimización en dos casos de estudio, en los cuales se utilizó una configuración de unión de soldadura a traslape con el modo de soldadura de ojo de cerradura o penetración completa, que es más bien conocida como “Keyhole welding”.

Práwa městská Králowstwj cžeskćho. Podruhé wytisstěná.

Dedication signed: Paulus Christianus a Koldina.