Bound Variable, Split Antecedent and Ellipsis Interpretations in L2 Portuguese: Implications for L2 Acquisition Theories.

Recently, in light of minimalist assumptions, some partial UG accessibility accounts to adult second language acquisition have made a distinction between the post-critical period ability to acquire new features based on their LF-interpretability (i.e. interpretable vs. uninterpretable features) (HAWKINS, 2005; HAWKINS; HATTORI, 2006; TSIMPLI; MASTROPAVLOU, 2007; TSIMPLI; DIMITRAKOPOULOU, 2007). The Interpretability Hypothesis (TSIMPLI; MASTROPAVLOU, 2007; TSIMPLI; DIMITRAKOPOULOU, 2007) claims that only uninterpretable features suffer a post-critical period failure and, therefore, cannot be acquired. Conversely, Full Access approaches claim that L2 learners have full access to UG’s entire inventory of features, and that L1/L2 differences obtain outside the narrow syntax. The phenomenon studied herein, adult acquisition of the Overt Pronoun Constraint (OPC) (MONTALBETTI, 1984) and inflected infinitives in nonnative Portuguese, challenges the Interpretability hypothesis insofar as it makes the wrong predictions for what is observed. The present data demonstrate that advanced learners of L2 Portuguese acquire the OPC and the syntax and semantics of inflected infinitives with native-like accuracy. Since inflected infinitives require the acquisition of new uninterpretable φ-features, the present data provide evidence in contra Tsimpli and colleagues’ Interpretability Hypothesis.

Clubroot (Plasmodiophora brassicae Woronin): an agricultural and biological challenge worldwide

Clubroot disease and the causal microbe Plasmodiophora brassicae offer abundant challenges to agriculturists and biological scientists. This microbe is well fitted for the environments which it inhabits. Plasmodiophora brassicae exists in soil as microscopic well protected resting spores and then grows actively and reproduces while shielded inside the roots of host plants. The pathogen is active outside the host for only short periods. Consequently, scientific studies are made challenging by the biological context of the host and pathogen and the technology required to investigate and understand that relationship. Controlling clubroot disease is a challenge for farmers, crop consultants and plant pathology practitioners because of the limited options which are available. Full symptom expression happens solely in members of the Brassicaceae family. Currently, only a few genes expressing strong resistance to P. brassicae are known and readily available. Agrochemical control is similarly limited by difficulties in molecule formulation which combines efficacy with environmental acceptability. Manipulation of husbandry encouraging improvements in soil structure, texture, nutrient composition and moisture content can reduce populations of P. brassicae. Integrating such strategies with rotation and crop management will reduce but not eliminate this disease. There are indications that forms of biological competition may be mobilised as additions to integrated control strategies. The aim of this review is to chart key themes in the development of scientific biological understanding of this host-pathogen relationship by offering signposts to grapple with clubroot disease which devastates crops and their profitability. Particular attention is given to the link between soil and nutrient chemistry and activity of this microbe.

End-of-life practices in seven Brazilian pediatric intensive care units

Objective: To evaluate the incidence of life support limitation and medical practices in the last 48 hrs of life of children in seven Brazilian pediatric intensive care units (PICUs). Design. Cross-sectional multicenter retrospective study based on medical chart review. Setting: Seven PICUs belonging to university and tertiary hospitals located in three Brazilian regions: two in Porto Alegre (southern region), two in Sao Paulo (southeastern region), and three in Salvador (northeastern region). Patients. Medical records of all children who died in seven PICUs from January 2003 to December 2004. Deaths in the first 24 hrs of admission to the PICU and brain death were excluded. Interventions: Two pediatric intensive care residents from each PICU were trained to fill out a standard protocol (K = 0.9) to record demographic data and all medical management provided in the last 48 hrs of life (inotropes, sedatives, mechanical ventilation, full resuscitation maneuvers or not). Student`s t-test, analysis of variance, chi-square test, and relative risk were used for comparison of data. Measurements and Main Results. Five hundred and sixty-one deaths were identified; 97 records were excluded (61 because of brain death and 36 due to <24 hrs in the PICU). Thirty-six medical charts could not be found. Cardiopulmonary resuscitation was performed in 242 children (57%) with a significant difference between the southeastern and northeastern regions (p =.0003). Older age (p = .025) and longer PICU stay (p = .001) were associated with do-not-resuscitate orders. In just 52.5% of the patients with life support limitation, the decision was clearly recorded in the medical chart. No ventilatory support was provided in 14 cases. Inotropic drug infusions were maintained or increased in 66% of patients with do-not-resuscitate orders. Conclusions. The incidence of life support limitation has increased among Brazilian PICUs but with significant regional differences. Do-not-resuscitate orders are still the most common practice, with scarce initiatives for withdrawing or withholding life support measures.

The CATH classification revisited-architectures reviewed and new ways to characterize structural divergence in superfamilies

The latest version of CATH (class, architecture, topology, homology) (version 3.2), released in July 2008 (http://www.cathdb.info), contains 1 14215 domains, 2178 Homologous superfamilies and 1110 fold groups. We have assigned 20 330 new domains, 87 new homologous superfamilies and 26 new folds since CATH release version 3.1. A total of 28 064 new domains have been assigned since our NAR 2007 database publication (CATH version 3.0). The CATH website has been completely redesigned and includes more comprehensive documentation. We have revisited the CATH architecture level as part of the development of a `Protein Chart` and present information on the population of each architecture. The CATHEDRAL structure comparison algorithm has been improved and used to characterize structural diversity in CATH superfamilies and structural overlaps between superfamilies. Although the majority of superfamilies in CATH are not structurally diverse and do not overlap significantly with other superfamilies, similar to 4% of superfamilies are very diverse and these are the superfamilies that are most highly populated in both the PDB and in the genomes. Information on the degree of structural diversity in each superfamily and structural overlaps between superfamilies can now be downloaded from the CATH website.

Gloss and gloss variations inelectrophotographic print = Glans och glansvariationer i elektrofotografiskt tryck

This degree project was performed at M-real Technology Centre in Örnsköldsvik. The perpose was to investigate thedifferences in gloss and gloss variations between chemical and ground toner and different paper grades in electrophotographicprints. Gloss is a property that gives the impression of a higher quality of a product. Therefore it is of great importance toaccomplish high gloss in advertising print.A test chart was printed on three different uncoated paper grades on three different printers. Thereafter, gloss, glossvariation, surface topography, print mottle and density were measured. A visual evalution was also performed. A multivariateanalysis was acheived of the data in order to find correlations between the measured variations.The results showed that paper grades with large surface roughness gave more variations in surface topography and glossvariations (both visual and measured) in print. A rough surface also gave more print mottle. Ground toner gave moresurface topography variations and mottle which increased with the amount of silicone used.

ICC-profilers funktionalitet vid byte av tryckfärgskvalitet

This degree theme work aims to evaluate the present ICC-profile and printing ink of Dalarnas Tidningar AB. The companyhas changed printing ink quality and wants to evaluate how the present ICC-profile work with the new printingink. Four different ICC-profiles were included in the comparison.One test printing was accomplished with two different separations. Two new ICC-profile was created, as a comparingmaterial. An densitometer was used to measure the technical parameters of the printing. IT8-charts and RGB-chartswas measured with spectrophotometer. La*b*-values, CMYK-values, graybalance curves, color deflections and colorgamuts was compared on screen and on the printed material.Materials from an earlier testprinting and evalution, made by Stora Enso Kvarnsveden AB 2003, was used to evaluatethe function of Dalarnas Tidningar AB´s ICC-profile with the present printing ink quality. The IT8-chart from todaystestprinting was oppened in a program for textediting to have access to La*b*- and CMYK values. The values from theearlier testprinting was supplied from Stora Enso Kvarnsveden AB.The result of this work shows that the ICC-profile from the company, compared with de other profiles, reproduce darkershadow regions which can make loss of details. An higher saturation is recieved in the red and yellow area while thegreen and blue area lose its intensity. The profile gave images which are some contrastless and with a flat reproduction.Today printing ink quality gives more saturation and intensity in the yellow and blue area compared with former printingink. The dark tone reproduces with decreased luminance, however.

Handläggning av intrauterin fosterdöd : En kartläggning av vårdprogram vid Sveriges kvinnokliniker

Background: Parents that loose a child in connection to labour are in great need of support.Health care provider treatment and support is of great importance to how the parents will experience something that is doomed from the beginning to be one of the most tragic events the parents will ever experience. For care givers to live up to this it is incredibly important that there are worked out guidelines to follow at these situations.Aim: To chart and describe Swedish maternity wards care program with reference to “IUFD”.Method: All clinics in Sweden have been questioned regarding care program for handling of “IUFD”. Care programs has been gathered, charted and described.Results: 87% (29 of 33) off the maternity wards has a plan for treatment and guidelines for “IUFD”. Care programs are more or less explanatory and a number of variables are present in different extents.Conclusion: That ones children die is the most tragic thing that can happen to a parent.The writer is of the opinion that it is of outmost importance that these parents get the best thinkable nursing and care.There are good guidelines regarding “IUFD” at the majority of the clinics, but to safeguard the quality the writer is of the opinion that it would be good if there where national guidelines for the shaping of these care programs.

Conceptual Product Development in Small Corporations

The main objective of the thesis “Conceptual Product Development in Small Corporations” is by the use of a case study test the MFD™-method (Erixon G. , 1998) combined with PMM in a product development project. (Henceforth called MFD™/PMM-method). The MFD™/PMM-method used for documenting and controlling a product development project has since it was introduced been used in several industries and projects. The method has been proved to be a good way of working with the early stages of product development, however, there are almost only projects carried out on large industries which means that there are very few references to how the MFD™/PMM-method works in a small corporation. Therefore, was the case study in the thesis “Conceptual Product Development in Small Corporations” carried out in a small corporation to find out whether the MFD™/PMM-method also can be applied and used in such a corporation.The PMM was proposed in a paper presented at Delft University of Technology in Holland 1998 by the author and Gunnar Erixon. (See appended paper C: The chart of modular function deployment.) The title “The chart of modular function deployment” was later renamed as PMM, Product Management Map. (Sweden PreCAD AB, 2000). The PMM consists of a QFD-matrix linked to MIM (Module Indication Matrix) via a coupling matrix which makes it possible to make an unbroken chain from the customer domain to the designed product/modules. The PMM makes it easy to correct omissions made in creating new products and modules.In the thesis “Conceptual Product Development in Small Corporations” the universal MFD™/PMM-method has been adapted by the author to three models of product development; original-, evolutionary- and incremental development.The evolutionary adapted MFD™/PMM-method was tested as a case study at Atlings AB in the community Ockelbo. Atlings AB is a small corporation with a total number of 50 employees and an annual turnover of 9 million €. The product studied at the corporation was a steady rest for supporting long shafts in turning. The project team consisted of management director, a sales promoter, a production engineer, a design engineer and a workshop technician, the author as team leader and a colleague from Dalarna University as discussion partner. The project team has had six meetings.The project team managed to use MFD™ and to make a complete PMM of the studied product. There were no real problems occurring in the project work, on the contrary the team members worked very well in the group, having ideas how to improve the product. Instead, the challenge for a small company is how to work with the MFD™/PMM-method in the long run! If the MFD™/PMM-method is to be a useful tool for the company it needs to be used continuously and that requires financial and personnel resources. One way for the company to overcome the probable lack of recourses regarding capital and personnel is to establish a good cooperation with a regional university or a development centre.

A computer study of the improvement of PV panel monthly outputs when the panel azimuth is changed thrice daily

The purpose of the calculations was to estimate the most suitable slopes and azimuths for three different positions per day of a solar panel in order to obtain the most possible energy from the PV panel compared with a stationary PV panel. The calculations were made in the computer program PV F-CHART.

Retuschörens arbetsprocess : Djupintervjuer med professionella retuschörer

Föreliggande studie har syftat till att, genom semistrukturerade djupintervjuer med professionella retuschörer aktiva i branschen, undersöka om gemensamma steg kunde urskiljas genom respondenternas beskrivningar av arbetsprocessen.Genom studien framkom det att respondenterna beskrev likartade processer samt att samarbete med medarbetare var en viktig faktor för ett utvecklande arbete. Beskrivningarna av arbetsprocessen tydde på att samtliga respondenter hade ett personligt intresse för arbetet och branschen.Respondenterna ansåg även att retuschörens tidigare erfarenhet var betydande och till stor del påverkar tidsåtgången för arbeten. De menade också att tidsåtgången även påverkas av hur utförlig arbetsordern är vid uppstart av projektet. Det framkom även att respondenterna själva inte genomför någon utförlig uppföljning och granskning av hur det slutliga materialet används.

Prototype Generation from Ontology Charts

Semantic Analysis is a business analysis method designed to capture system requirements. While these requirements may be represented as text, the method also advocates the use of Ontology Charts to formally denote the system's required roles, relationships and forms of communication. Following model driven engineering techniques, Ontology Charts can be transformed to temporal Database schemas, class diagrams and component diagrams, which can then be used to produce software systems. A nice property of these transformations is that resulting system design models lend themselves to complicated extensions that do not require changes to the design models. For example, resulting databases can be extended with new types of data without the need to modify the database schema of the legacy system. Semantic Analysis is not widely used in software engineering, so there is a lack of experts in the field and no design patterns are available. This make it difficult for the analysts to pass organizational knowledge to the engineers. This study describes an implementation that is readily usable by engineers, which includes an automated technique that can produce a prototype from an Ontology Chart. The use of such tools should enable developers to make use of Semantic Analysis with minimal expertise of ontologies and MDA.

Detailed Map and Recreational Suitability Assessment of the Colby Trail System

This map is designed as a resource for students and the public to use and develop a better understanding of the trails system on the Colby Campus. I used a Garmin GPSmap 60CS to chart all the trails on Runnals Hill and in the Arboretum. Then, using ArcGIS, I compiled the tracked trails and laid them over an aerial photo of the campus. Because many of the trails are hard to find, I took digital photos of each trail entry to help the user locate them. Then, by taking note of the grade and width of the trail, I decided which trails were suitable for certain activities. This gives users an idea of where to go for walking, running, mountain biking, cross-country skiing, and snowshoeing.

Técnica de programação e controle da construção repetitiva, linha de balanço, estudo de caso de um conjunto habitacional

Este trabalho apresenta uma técnica de programação e controle da construção repetitiva denominada Linha de Balanço. E uma técnica, surgida na indústria fabril, onde a produção em série e em grande escala exige a organização dos métodos de produção e a racionalização do trabalho. O estudo, inicialmente, modela o trabalho de construção de unidades repetitivas, salientando os problemas de organização e administração destes empreendimentos. Num segundo momento, são apresentados os princípios teóricos da técnica com aplicações práticas da programação. Por fim, é analisada a metodologia usual de construção de conjuntos habitacionais através de um estudo de caso e, observadas as condições de aplicação da técnica da Linha de Balanço, não exigindo mudificações muito profundas na atual ação gerencial neste tipo de obra. As conclusões esboçadas confirmam as vantagens da técnica da Linha de Balanço para estes empreendimentos e propõem a sua utilização na organização do trabalho nos canteiros repetitivos.

Implementação de CRM em indústria petroquímica de 2ª geração e análise do nível de satisfação do cliente resultante

A competitividade das empresas apresenta forte ligação com a qualidade do relacionamento com o cliente. Para competir em tempo real é preciso dotar a empresa de meios que permitam conhecer e relacionar-se de forma cada vez mais eficiente com os clientes. O uso intensivo da tecnologia é fator que contribui para que o relacionamento com o cliente se torne mais efetivo. CRM (Customer Relationship Management) faz uso da tecnologia de informação com o objetivo de desenvolver e gerenciar relações entre empresas e seus clientes, de forma individualizada e mutuamente benéfica. O presente trabalho refere-se à implementação de um sistema CRM, abrangendo as etapas de seleção da solução de CRM, definição do organograma, cronograma e metodologia de trabalho, redesenho dos processos de atendimento ao cliente e configuração do software. Também é objeto deste trabalho a verificação do nível de satisfação do cliente resultante. O estudo foi desenvolvido junto a uma empresa do setor petroquímico, caso pioneiro de implantação de CRM no país, considerando o segmento de mercado em análise. O texto discute a relação existente entre um sistema de CRM e a satisfação do cliente, apresentando os resultados de uma pesquisa de satisfação aplicada aos clientes da empresa em estudo.

Mudanças no hábito de fumar e ganho de peso gestacional : um estudo de coorte em capitais brasileiras

Objetivo: Avaliar a influência de mudanças no hábito de fumar sobre o ganho de peso gravídico materno. Métodos: Foram entrevistadas 5.564 gestantes com 20 anos ou mais, sem diabetes mellitus prévio em serviços de pré-natal geral de seis capitais brasileiras, entre 1991 e 1995, e acompanhamos, através de revisão de prontuários, as gestações até o parto, identificando 4.000 gestantes com peso pré-gravídico relatado, peso medido no terceiro trimestre, hábito de fumar e época de sua eventual modificação, quando disponíveis. Resultados: Entre as gestantes ex-fumantes (915, 23% do total), 240 (26%) pararam de fumar durante a gravidez. A mediana de cigarros/dia das que continuaram fumantes (717, 18%) foi reduzida de 10 para 5 após o início da gravidez. Após ajustar para idade, escolaridade, cor da pele, IMC pré-gravídico, paridade e centro clínico, as ex-fumantes ganharam 1.030 g (IC95% 590 a 1.460) a mais que as nunca fumantes, sendo maior a diferença (1.540, IC95% 780 a 2.300 g) nas que pararam após a concepção. O ganho do peso na gravidez se correlacionou, tanto em fumantes quanto em ex-fumantes, com o número de cigarros diminuídos na gravidez. Conclusão: Diminuir ou parar de fumar na gravidez, embora importante para uma gestação saudável, é fator de risco para ganho de peso materno.