Sorological evaluation of commercial vaccines against enterotoxemia in goats.

Enterotoxemia in sheep and in goats is caused by the effects of the epsilon toxin of C/ostridium perfringens type D, being considered the main infectious cause of mortality in those animal species. The main prophylactic measures include adequate nutritional management and vaccination of ali animais using vaccines of high immunogenic power. Six commercial vaccines containing in its formulation the epsilon toxoid of C. perfringens type D were sorogically evaluated. Eighty four female goat kids, whose mothers had no previous vaccination history against clostridioses were used. They were divided into six groups of 14 animais each. The animais of the control group didn't receive any vaccine dose and the animais from the groups 1 to 5 received two vaccine doses, The first vaccine dose was applied at 45 days of life (day zero) and the second dose at 75 days (30 days after the first dose). Blood samples were collected from the goat kids at the days zero, 30, 60, 90, 120 and 150 after the beginning of the experiment, in order to evaluate the immunologic response. The Indirect ELlSA technique was used for the quantification of the antibodies against epsilon toxin in the samples of blood serum of the animais. In day zero, no animal presented titre considered protector. The largest number of animais considered protected was found at day 60, in response to the two initial doses of the vaccine (days O and 30, first and second doses, respectively). Only tive animaIs which received the vaccine 1 and one animal which received the vaccine 3 stayed wilh titres of antibodies considered up to 150 days after the first vaccine dose. Based on the results, it was concluded lhat the evaluated vaccines showed small amount of epsilon toxoid in the commercial formulations, a crucial fact for lhe low efficiency of. the vaccines. For commercial reasons, the vaccines against the clostridioses present versatile formulations, with several toxoid types, used for various animal species, which certainly contributed to reduce their effectiveness in preventing the iIInesses caused by the clostridia or their toxins.

Relevance of anatomy to medical education and clinical practice: perspectives of medical students, clinicians, and educators

Introduction: Against a backdrop of ever-changing diagnostic and treatment modalities, stakeholder perceptions (medical students, clinicians, anatomy educators) are crucial for the design of an anatomy curriculum which fulfils the criteria required for safe medical practice. This study compared perceptions of students, practising clinicians, and anatomy educators with respect to the relevance of anatomy education to medicine. Methods: A quantitative survey was administered to undergraduate entry (n = 352) and graduate entry students (n = 219) at two Irish medical schools, recently graduated Irish clinicians (n = 146), and anatomy educators based in Irish and British medical schools (n = 30). Areas addressed included the association of anatomy with medical education and clinical practice, mode of instruction, and curriculum duration. Results: Graduate-entry students were less likely to associate anatomy with the development of professionalism, teamwork skills, or improved awareness of ethics in medicine. Clinicians highlighted the challenge of tailoring anatomy education to increase student readiness to function effectively in a clinical role. Anatomy educators indicated dissatisfaction with the time available for anatomy within medical curricula, and were equivocal about whether curriculum content should be responsive to societal feedback. Conclusions: The group differences identified in the current study highlight areas and requirements which medical education curriculum developers should be sensitive to when designing anatomy courses.

Left atrial appendage: anatomy and imaging landmarks pertinent to percutaneous transcatheter occlusion

Percutaneous left atrial appendage (LAA) closure represents a complementary option and effective treatment for patients at risk of thromboembolism, especially in patients for whom it may be difficult to achieve satisfactory anticoagulation control or where anticoagulation treatment is not possible or desirable. Effective and safe transcatheter LAA occlusion requires a detailed knowledge of crucial anatomic landmarks and endocardial morphologic variants of the LAA and its neighbouring structures.1 ,2 w1–w3 Our aim in this article is to provide the basic anatomic information that is important for the interventional cardiologist to know when planning an LAA occlusion procedure.

Left atrial anatomy relevant to catheter ablation

The rapid development of interventional procedures for the treatment of arrhythmias in humans, especially the use of catheter ablation techniques, has renewed interest in cardiac anatomy. Although the substrates of atrial fibrillation (AF), its initiation and maintenance, remain to be fully elucidated, catheter ablation in the left atrium (LA) has become a common therapeutic option for patients with this arrhythmia. Using ablation catheters, various isolation lines and focal targets are created, the majority of which are based on gross anatomical, electroanatomical, and myoarchitectual patterns of the left atrial wall. Our aim was therefore to review the gross morphological and architectural features of the LA and their relations to extracardiac structures. The latter have also become relevant because extracardiac complications of AF ablation can occur, due to injuries to the phrenic and vagal plexus nerves, adjacent coronary arteries, or the esophageal wall causing devastating consequences.

Cavotricuspid isthmus: anatomy and electrophysiology features: its evaluation before radiofrequency ablation

The cavotricuspid isthmus (CTI) in the lower pan of the right atrium, between the inferior caval vein and the tricuspid valve, is considered crucial in producing a conduction delay and. hence, favoring the perpetuation of a reentrant circuit. Non-uniform wall thickness, muscle fiber orientation and the marked variability in muscular architecture in the CTI should be taken into consideration from the perspective of anisotropic conduction, thus producing an electrophysiologic isthmus. The purpose of this article is to review the anatomy and electrophysiology of the CTI in human hearts to provide useful information to plan CTI radio frequency ablation for the patients with atrial flutter.

Processing and additive manufacturing of bones for the teaching of human anatomy

Traditionally, the teaching of human anatomy in health sciences has been based on the use of cadaveric material and bone parts for practical study. The bone materials get deteriorated and hardly mark the points of insertion of muscles. However, the advent of new technologies for 3D printing and creation of 3D anatomical models applied to teaching, has enabled to overcome these problems making teaching more dynamic, realistic and attractive. This paper presents some examples of the construction of three-dimensional models of bone samples, designed using 3D scanners for posterior printing with addition printers or polymer injection printers.

Anatomy and Eugenics: Case Study of Change and Stasis in Classificatory Structures

Research poster about classification structures

Antimicrobial activity of Brazilian propolis extracts for Staphylococcus aureus of sheep and goats mastitis origin

Twenty-four S. aureus isolates were analysed. From those, 22 were isolated from milk of goats and sheep with clinical and subclinical mastitis, from the region of Vale do São Francisco in the Brazilian Sertão and S. aureus ATCC 25923 plus a MRSA strain were added. Alcoholic extracts were produced from several batches of green, red and brown propolis consisting of 300 g of raw propolis in 700 mL of 70 % ethanol. Four genes related to antimicrobial resistance were assessed: blaZ that determines the resistance to β-lactam antibiotics, and genes icaA, icaD and bap that influence the production of biofilm. For the tests of susceptibility to different types of propolis the microdilution method was used, in triplicate, and dilutions between 0.003672 and 15% were tested, 70 % ethanol consisted of a negative control. The gene blaZ was found in 15 isolates; icaA gene was present in 3 isolates, icaD gene in 2 and bap gene was detected in 6 isolates. All the propolis tested exhibited antimicrobial activity, ranging from 44 to 100 % of susceptible isolates depending on different propolis batches. According to the results of this experiment the green and red propolis appear to have better antimicrobial activity than the brown variety.

Recovery of reproductive activity and fertility of Saanen goats affected by hydrometra after cloprostenol treatment and estrus induction during the non-breeding season (preliminary data).

2016

Reproductive seasonality in Saanen goats managed in southeast Brazil.

The aim of this study was to characterize the reproductive seasonality during the period of one year in Saanen goats managed in southeastern Brazil These results endorse hormonal methods (estrus synchronization and induction of synchronized estrus) or natural (male effect, flushing or light treatment) more appropriate according to the time of year in the region. Saanen goats, managed under tropical climate in southeastern Brazil, have a breeding season set from March until mid-August with the transitional phase to the anestrus in September. It is extends to mid-December at the new one transition phase for the reproductive season in March.

Effect of heat stress on milk production of goats from Alpine and Saanen breeds in Brazil.

The purpose of this bibliography review was to approach the thermal comfort rates on milk production of goats from Alpine and Saanen breeds in Brazil. The caloric stress caused by weather changes to which the animals are submitted, influence on the mechanisms of normal physiological processes of the body. Thus, the effect on the lactation process in goats can be mentioned, where it decreases the amount of water in the body with the consequent decrease in synthesis and milk ejection interfering in the production of hormone prolactin and growth hormone. The animal?s interaction with the environment must be considered when the aim in livestock farming is welfare, because the different responses of the animal to the peculiarities of each region are crucial for the success of the animal adaptation. So, the correct identification of the factors that influence the productive life of the animal, such as the stress caused by the seasonal fluctuations of the environment, allow production systems management, making it possible to make them sustainable and viable. The maintenance of these parameters in normal levels is very important, to the point of being used in the evaluation of climate adaptability of breeds to a certain environmental condition. In this way, the concerns about animal welfare and environmental comfort are due to the climatic variables and the behavioral, physiological and productive responses are prevailing when implementing the suitability of certain production systems.

The Synchronization of Estrous in Sheep and Goats

The review of estrous synchronization was biologically, hormonally, and laserly to studied in the sheep and goat. The observed parameters of the synchronization of estrous in sheep and goat were the onset and the length of estrous. The result of this research shows that the hormonal synchronization of estrous results in the presence of estrous in 30-42 hours after  the withdrawal of the sponges; while in goat it is in the average of  35.13±9.9 hours. Than the length of estrous in sheep was 30-48 hours and in goat the average was 36.00±14.96 hours. The synchronization of estrous by Laserpuncture results in the presence of estrous in goat 43.94-59.75 hours after the given laser beam (Animal Production 2(1): 1-8.Key Words: the synchronization of estrous, sheep, goat.

The mechanics of disc degeneration from an engineering and computational modelling viewpoint

The anatomy and microstructure of the spine and in particular the intervertebral disc are intimately linked to how they operate in vivo and how they distribute loads to the adjacent musculature and bony anatomy. The degeneration of the intervertebral discs may be characterised by a loss of hydration, loss of disc height, a granular texture and the presence of annular lesions. As such, degeneration of the intervertebral discs compromises the mechanical integrity of their components and results in adaption and modification in the mechanical means by which loads are distributed between adjacent spinal motion segments.

Competitiveness of the Indonesian construction industry

Indonesia’s construction industry is important to the national economy. However, its competitiveness is considered low due to the lack of success of its development strategy and policy. A new approach known as the cluster approach is being used to make strategy and policy in order to develop a stronger, and more competitive industry. This paper discusses the layout of the Indonesian construction cluster and its competitiveness. The archival analysis research approach was used to identify the construction cluster. The analysis was based on the input-output (I/O) tables of the years 1995 and 2000, which were published by the Indonesian Central Bureau of Statistics. The results suggest that the Indonesian construction cluster consists of the industries directly involved in construction as the core, with the other related and supporting industries as the balance. The anatomy of the Indonesian construction cluster permits structural changes to happen within it. These changes depend on policies that regulate the cluster’s constituents

Orthopaedics and Trauma Queensland Annual Report 2008

Orthopaedics and Trauma Queensland is an internationally recognised research group that is developing into an international leader in research and education. It provides a stimulus for research, education and clinical application within the international orthopaedic and trauma communities. Orthopaedics and Trauma Queensland develops and promotes the innovative use of engineering and technology, in collaboration with surgeons, to provide new techniques, materials, procedures and medical devices. Its integration with clinical practice and strong links with hospitals ensure that the research will be translated into practical outcomes for patients. The group undertakes clinical practice in orthopaedics and trauma and applies core engineering, modelling and clinical skills to challenges in medicine. The research is built on a strong foundation of knowledge in biomedical engineering and incorporates expertise in cell biology, mathematical modelling, human anatomy and physiology and clinical medicine in orthopaedics and trauma. New knowledge is being developed and applied to the full range of orthopaedic diseases and injuries, such as knee and hip replacements, fractures and spinal deformities.