993 resultados para Founding Process. Request for Proposal


Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work focused on how different types of oil phase, MCT (medium chain triglycerides) and LCT (long chain triglycerides), exert influence on the gelation process of beeswax and thus properties of the organogel produced thereof. Organogels were produced at different temperatures and qualitative phase diagrams were constructed to identify and classify the type of structure formed at various compositions. The microstructure of gelator crystals was studied by polarized light microscopy. Melting and crystallization were characterized by differential scanning calorimetry and rheology (flow and small amplitude oscillatory measurements) to understand organogels' behaviour under different mechanical and thermal conditions. FTIR analysis was employed for a further understanding of oil-gelator chemical interactions. Results showed that the increase of beeswax concentration led to higher values of storage and loss moduli (G, G) and complex modulus (G*) of organogels, which is associated to the strong network formed between the crystalline gelator structure and the oil phase. Crystallization occurred in two steps (well evidenced for higher concentrations of gelator) during temperature decreasing. Thermal analysis showed the occurrence of hysteresis between melting and crystallization. Small angle X-ray scattering (SAXS) analysis allowed a better understanding in terms of how crystal conformations were disposed for each type of organogel. The structuring process supported by medium or long-chain triglycerides oils was an important exploit to apprehend the impact of different carbon chain-size on the gelation process and on gels' properties.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dissertação de mestrado em Estudos da Criança (área de especialização em Integração Curricular e Inovação Educativa)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Neste artigo propõe-se uma contribuição da teoria da vinculação na compreensão dos processos de adaptação dos adultos ao seu divórcio e como a desvinculação ao ex-cônjuge interfere na coparentalidade pós-divórcio. Este artigo formula duas hipóteses teóricas. A primeira hipótese afirma que o divórcio, enquanto processo relacional, deve ser lido como um momento de perda que germina reacções psicológicas similares às experienciadas pelos viúvos, tal como descreve Bowlby no modelo de perda da figura de vinculação, estando dependente dos estilos de vinculação dos adultos. A segunda hipótese sustenta que a coparentalidade pós-divórcio é predita pelos estilos de vinculação e pela qualidade da reorganização da vinculação dos pais. Finalmente, uma integração teórica é apresentada, operacionalizada numa proposta de investigação futura neste domínio.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

OBJECTIVE: To suggest criteria to guide protocol prescription in ramp treadmill testing, according to sex and age, based on velocity, inclination, and max VO2 reached by the population studied. METHODS: Prospective study describing heart rate (HR), time, velocity, inclination, and VO2 estimated at maximum effort of 1840 individuals from 4 to 79 years old, who performed a treadmill test (TT) according to the ramp protocol. A paired Student t test was used to assess the difference between predicted and reached max VO2, calculated according to the formulas of the "American College of Sports Medicine". RESULTS: Submaximal HR was surpassed in 90.1% of the examinations, with a mean time of 10.0±2.0 minute. Initial and peak inclination velocity of the exercise and max VO2 were inversely proportional to age and were greater in male patients. Predicted Max VO2 was significantly lower than that reached in all patients, except for female children and adolescents (age < 20 years old). CONCLUSION: Use of velocity, inclination, and maximum VO2 actually reached, as a criterion in prescribing the ramp protocol may help in the performance of exercise in treadmill testing. The ramp protocol was well accepted in all age groups and sexes with exercise time within the programmed 8 to 12 minutes.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dissertação apresentada na Universidade de Lisboa - Faculdade de Arquitetura, para obtenção do Grau de Mestre em Arquitetura.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dissertação apresentada na Universidade de Lisboa - Faculdade de Arquitetura, para obtenção do Grau de Mestre em Arquitetura.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

En Argentina el cultivo de soja ocupa el primer lugar en superficie sembrada. El 90% de la producción se obtiene en la zona central del pais. La siembra directa favorece la multiplicación y supervivencia de fitopatógenos causantes de tizón y pústula bacterianos. El tizón es producido por Pseudomonas syringae pv. glycinea observándose manchas marrones en las hojas. Produce gran variedad de toxinas: coronatina, faseolotoxina, siringomicina, tabtoxina, proteínas “nucleation ice”, entre otras, las cuales contribuyen a la clorosis y necrosis. En la infección, además, están involucrados exopolisacáridos (levano y alginato). La celulosa ha sido relacionada en la adhesión bacteriana y en la formación de biofilm. La pústula es causada por Xanthomonas axonopodis pv. glycines. Produce manchas pequeñas con una pequeña pústula de color claro. Libera enzimas como α-amilasa, proteasa, endo β-mannanasa, actividad peptolítica, que degradan componentes vegetales. Xantan, producido por X. axonopodis es uno de los componentes necesarios para la formación de biofilm. Este último es considerado un importante factor de virulencia porque proporciona una estrategia de colonización que otorga mayor resistencia a ambientes desfavorables, tolerancia a antimicrobianos, producción de metabolitos y exoenzimas, etc. Actualmente el control de bacterias fitopatógenas se realiza mediante pesticidas con alta toxicidad para los consumidores y el ambiente. Para evitar las bacteriosis en la práctica se sugiere la rotación de cultivos y utilizar semillas certificadas. Se están probando compuestos naturales derivados de plantas medicinales como pesticidas; estos se pueden dividir en varias categorías fitoquímicas. Varios estudios confirman la actividad antibacteriana, antifúngica y antiviral de estos productos. Extractos vegetales con alto contenido de flavonoides y aceite esenciales poseen una importante actividad antibacteriana. Además, algunos aceites esenciales podrían estar incidiendo en la liberación y/o producción de biofilm, exopolisacáridos y exoproteínas. La gran incidencia de las infecciones por fitopatógenos y las pérdidas económicas que estas acarrean hacen que su control presente grandes dificultades para la agricultura sustentable en soja de nuestro país. En este trabajo se propone estudiar los diferentes factores de virulencia de cepas bacterianas fitopatógenas y evaluar el rol que cumplen en el proceso de la enfermedad en cultivos de soja y desarrollar estrategias para el control de bacteriosis vegetales aplicando productos naturales aislados de plantas aromáticas. La correcta utilización de productos antimicrobianos de origen natural aplicados sobre el cultivo y/o sobre las semillas evitaría la dispersión de la enfermedad y la eliminación al medio ambiente de productos contaminantes no deseados. In Argentina, soybean cultivation occupies the first place; 90% of this cereal is produced in the central region of the country. Intensive tillage practices favour multiplication and survival of bacterial phytopathogens causing blight and pustule diseases. Pseudomonas syringae pv. glycinea produce several toxins like coronatine, faseolotoxine, siringomicine, tabtoxine and proteins of nucleation ice that contribute to the develop of chlorosis and necrosis, characteristic of bacterial blight. It also produces levan and alginate, cellulose and biofilm. Pustule disease is caused by Xanthomonas axonopodis pv glycines, which produce enzymes like α-amilase, protease, endo β-mannanase, peptolitic activity, xanthan and biofilm. Nowadays the control of phytopathogenic bacteria consists in the application of pesticides that are toxic for the environment and man. Natural products from medicinal plants are a new alternative for the treatment of phytopathogens. Researches made with phytochemical compounds (flavonoids, phenols, quinones, cummarines, essential oils, terpenes) support the antimicrobial activity of these natural products. What is more, these substances could suppress the biofilm, exoproteins and exopolisaccharides formation and release of them. The infections caused by phytopathogens provoke economical loses and its control presents big difficulties in our country. The proposal of this work is the characterization of phytopatoghenic strains, its virulence factors and the role they play in the disease process. The development of a new alternative for the control of vegetable bacteriosis using natural products obtained from aromatic plants and the correct application of them on sown fields or on seeds is also an objective in this work.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

As digital imaging processing techniques become increasingly used in a broad range of consumer applications, the critical need to evaluate algorithm performance has become recognised by developers as an area of vital importance. With digital image processing algorithms now playing a greater role in security and protection applications, it is of crucial importance that we are able to empirically study their performance. Apart from the field of biometrics little emphasis has been put on algorithm performance evaluation until now and where evaluation has taken place, it has been carried out in a somewhat cumbersome and unsystematic fashion, without any standardised approach. This paper presents a comprehensive testing methodology and framework aimed towards automating the evaluation of image processing algorithms. Ultimately, the test framework aims to shorten the algorithm development life cycle by helping to identify algorithm performance problems quickly and more efficiently.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Surgeons may use a number of cutting instruments such as osteotomes and chisels to cut bone during an operative procedure. The initial loading of cortical bone during the cutting process results in the formation of microcracks in the vicinity of the cutting zone with main crack propagation to failure occuring with continued loading. When a material cracks, energy is emitted in the form of Acoustic Emission (AE) signals that spread in all directions, therefore, AE transducers can be used to monitor the occurrence and development of microcracking and crack propagation in cortical bone. In this research, number of AE signals (hits) and related parameters including amplitude, duration and absolute energy (abs-energy) were recorded during the indentation cutting process by a wedge blade on cortical bone specimens. The cutting force was also measured to correlate between load-displacement curves and the output from the AE sensor. The results from experiments show AE signals increase substantially during the loading just prior to fracture between 90% and 100% of maximum fracture load. Furthermore, an amplitude threshold value of 64dB (with approximate abs-energy of 1500 aJ) was established to saparate AE signals associated with microcracking (41 – 64dB) from fracture related signals (65 – 98dB). The results also demonstrated that the complete fracture event which had the highest duration value can be distinguished from other growing macrocracks which did not lead to catastrophic fracture. It was observed that the main crack initiation may be detected by capturing a high amplitude signal at a mean load value of 87% of maximum load and unsteady crack propagation may occur just prior to final fracture event at a mean load value of 96% of maximum load. The author concludes that the AE method is useful in understanding the crack initiation and fracture during the indentation cutting process.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Univariate statistical control charts, such as the Shewhart chart, do not satisfy the requirements for process monitoring on a high volume automated fuel cell manufacturing line. This is because of the number of variables that require monitoring. The risk of elevated false alarms, due to the nature of the process being high volume, can present problems if univariate methods are used. Multivariate statistical methods are discussed as an alternative for process monitoring and control. The research presented is conducted on a manufacturing line which evaluates the performance of a fuel cell. It has three stages of production assembly that contribute to the final end product performance. The product performance is assessed by power and energy measurements, taken at various time points throughout the discharge testing of the fuel cell. The literature review performed on these multivariate techniques are evaluated using individual and batch observations. Modern techniques using multivariate control charts on Hotellings T2 are compared to other multivariate methods, such as Principal Components Analysis (PCA). The latter, PCA, was identified as the most suitable method. Control charts such as, scores, T2 and DModX charts, are constructed from the PCA model. Diagnostic procedures, using Contribution plots, for out of control points that are detected using these control charts, are also discussed. These plots enable the investigator to perform root cause analysis. Multivariate batch techniques are compared to individual observations typically seen on continuous processes. Recommendations, for the introduction of multivariate techniques that would be appropriate for most high volume processes, are also covered.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The impending introduction of lead-free solder in the manufacture of electrical and electronic products has presented the electronics industry with many challenges. European manufacturers must transfer from a tin-lead process to a lead-free process by July 2006 as a result of the publication of two directives from the European Parliament. Tin-lead solders have been used for mechanical and electrical connections on printed circuit boards for over fifty years and considerable process knowledge has been accumulated. Extensive literature reviews were conducted on the topic and as a result it was found there are many implications to be considered with the introduction of lead-free solder. One particular question that requires answering is; can lead-free solder be used in existing manufacturing processes? The purpose of this research is to conduct a comparative study of a tin-lead solder and a lead-free solder in two key surface mount technology (SMT) processes. The two SMT processes in question were the stencil printing process and the reflow soldering process. Unreplicated fractional factorial experimental designs were used to carry out the studies. The quality of paste deposition in terms of height and volume were the characteristics of interest in the stencil printing process. The quality of solder joints produced in the reflow soldering experiment was assessed using x-ray and cross sectional analysis. This provided qualitative data that was then uniquely scored and weighted using a method developed during the research. Nested experimental design techniques were then used to analyse the resulting quantitative data. Predictive models were developed that allowed for the optimisation of both processes. Results from both experiments show that solder joints of comparable quality to those produced using tin-lead solder can be produced using lead-free solder in current SMT processes.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2012

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Background: When performing the Valsalva maneuver (VM), adults and preadolescents produce the same expiratory resistance values. Objective: To analyze heart rate (HR) in preadolescents performing VM, and propose a new method for selecting expiratory resistance. Method: The maximal expiratory pressure (MEP) was measured in 45 sedentary children aged 9-12 years who subsequently performed VM for 20 s using an expiratory pressure of 60%, 70%, or 80% of MEP. HR was measured before, during, and after VM. These procedures were repeated 30 days later, and the data collected in the sessions (E1, E2) were analyzed and compared in periods before, during (0-10 and 10-20 s), and after VM using nonparametric tests. Results: All 45 participants adequately performed VM in E1 and E2 at 60% of MEP. However, only 38 (84.4%) and 25 (55.5%) of the participants performed the maneuver at 70% and 80% of MEP, respectively. The HR delta measured during 0-10 s and 10-20 s significantly increased as the expiratory effort increased, indicating an effective cardiac autonomic response during VM. However, our findings suggest the VM should not be performed at these intensities. Conclusion: HR increased with all effort intensities tested during VM. However, 60% of MEP was the only level of expiratory resistance that all participants could use to perform VM. Therefore, 60% of MEP may be the optimal expiratory resistance that should be used in clinical practice.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Limestone, calcination, normal shaft kiln, process simulation, temperature profiles