Studio, microfabbricazione e caratterizzazione di dispositivi in silicio deformato per applicazioni opto-elettroniche

Il silicio, materiale di base per la realizzazione di gran parte dei dispositivi microelettronici, non trova largo impiego in fotonica principalmente a causa delle sue proprietà elettromagnetiche: oltre ad un band-gap indiretto, il silicio presenta difatti una elevata simmetria reticolare che non permette la presenza di alcuni effetti, come quello elettro-ottico, che sono invece utilmente sfruttati in altri materiali per la fotonica. E’ stato recentemente dimostrato che la deformazione indotta dalla deposizione di film ad alto stress intrinseco potrebbe indurre alcuni di questi effetti, rompendo le simmetrie della struttura. In questo lavoro di tesi viene studiata, mediante simulazioni, microfabbricazione di dispositivi, e caratterizzazione sperimentale, la deformazione reticolare indotta su strutture di tipo ridge micrometriche in silicio mediante deposizione di un film di Si3N4. La deformazione e’ stata analizzata tramite simulazione, utilizzando il metodo agli elementi finiti ed analisi di strain tramite la tecnica di microscopia ottica a trasmissione Convergent-Beam Electron Diffraction. Questa tecnica permette di ottenere delle mappe 2D di strain con risoluzione spaziale micrometrica e sensibilita’ dell’ordine di 100microstrain. Il confronto fra le simulazioni e le misure ha messo in evidenza un accordo quantitativo fra le due analisi, da una parte confermando la validità del modello numerico utilizzato e dall’altro verificando l’accuratezza della tecnica di misura, impiegata innovativamente su strutture di questo tipo. Si sono inoltre stimate le grandezze ottiche: birifrangenza e variazione dell’indice di rifrazione efficace rispetto al caso deformato.di una guida SOI su cui e’ deposto uno strato di nituro. I valori stimati, per uno spessore di 350 nm sono rispettivamente di 0.014 e -0.00475. Questi valori lasciano credere che la tecnologia sia promettente, e che un’evoluzione nei processi di fabbricazione in grado migliorare il controllo delle deformazione potrebbe aprire la strada ad un utilizzo del silicio deformato nella realizzazione di dispositivi ottici ed elettro-ottici.

Silicon Photonics Integrated Circuits for Flexible Optical Systems

This dissertation deals with the design and the characterization of novel reconfigurable silicon-on-insulator (SOI) devices to filter and route optical signals on-chip. Design is carried out through circuit simulations based on basic circuit elements (Building Blocks, BBs) in order to prove the feasibility of an approach allowing to move the design of Photonic Integrated Circuits (PICs) toward the system level. CMOS compatibility and large integration scale make SOI one of the most promising material to realize PICs. The concepts of generic foundry and BB based circuit simulations for the design are emerging as a solution to reduce the costs and increase the circuit complexity. To validate the BB based approach, the development of some of the most important BBs is performed first. A novel tunable coupler is also presented and it is demonstrated to be a valuable alternative to the known solutions. Two novel multi-element PICs are then analysed: a narrow linewidth single mode resonator and a passband filter with widely tunable bandwidth. Extensive circuit simulations are carried out to determine their performance, taking into account fabrication tolerances. The first PIC is based on two Grating Assisted Couplers in a ring resonator (RR) configuration. It is shown that a trade-off between performance, resonance bandwidth and device footprint has to be performed. The device could be employed to realize reconfigurable add-drop de/multiplexers. Sensitivity with respect to fabrication tolerances and spurious effects is however observed. The second PIC is based on an unbalanced Mach-Zehnder interferometer loaded with two RRs. Overall good performance and robustness to fabrication tolerances and nonlinear effects have confirmed its applicability for the realization of flexible optical systems. Simulated and measured devices behaviour is shown to be in agreement thus demonstrating the viability of a BB based approach to the design of complex PICs.

"Il carceriere di sé medesimo" di Lodovico Adimari e Alessandro Melani, Firenze 1681. Dalla «comedia» di Pedro Calderón de la Barca al «drama per musica» italiano di fine Seicento

Questo lavoro è imperniato sullo studio di uno dei melodrammi più interessanti della fine del XVII secolo: “Il carceriere di sé medesimo” di Lodovico Adimari (1644-1708) e Alessandro Melani (1639-1703), allestito per la prima volta a Firenze nel 1681, e ripreso nel giro di una ventina d’anni a Reggio (1684), a Bologna (1697) e a Vienna (1702). L’opera vanta un’origine drammatica di spicco: risale infatti alla commedia “Guardarse a sí mismo” di Pedro Calderón de la Barca (1600-1681) mediata dal “Geôlier de soi-mesme” di Thomas Corneille (1625-1709), e presenta qualità poetiche e musicali evidenti, assicurate dai nomi del poeta Lodovico Adimari e del compositore Alessandro Melani. A ciò si aggiungano una tradizione articolata in quattro allestimenti, nonché un elevato numero di testimoni superstiti: cinque edizioni del libretto (testimoniate da numerosi esemplari) e il numero fortunatissimo di tre partiture manoscritte, conservate a Parigi, Bologna e Modena. La tesi contiene l’edizione critica del “Carceriere di sé medesimo” di Adimari con tutte le varianti accumulatesi nella riedizione del libretto e nella copiatura della partitura, l’analisi del dramma, a partire dal confronto tra i testi di Calderón, Corneille e Adimari, e lo studio delle sue componenti drammatiche, formali e contenutistiche. Si aggiunge uno studio sul contesto storico-musicale degli allestimenti di Firenze, Reggio, Bologna e Vienna, nonché l’edizione dei restanti tre drammi di Adimari: la commedia “Le gare dell’amore e dell’amicizia” (1679), e il dramma per musica “L’amante di sua figlia” (1684).

Characterization of integrated Bragg gratings in silicon-on-insulator

Silicon-on-insulator (SOI) is rapidly emerging as a very promising material platform for integrated photonics. As it combines the potential for optoelectronic integration with the low-cost and large volume manufacturing capabilities and they are already accumulate a huge amount of applications in areas like sensing, quantum optics, optical telecommunications and metrology. One of the main limitations of current technology is that waveguide propagation losses are still much higher than in standard glass-based platform because of many reasons such as bends, surface roughness and the very strong optical confinement provided by SOI. Such high loss prevents the fabrication of efficient optical resonators and complex devices severely limiting the current potential of the SOI platform. The project in the first part deals with the simple waveguides loss problem and trying to link that with the polarization problem and the loss based on Fabry-Perot Technique. The second part of the thesis deals with the Bragg Grating characterization from again the point of view of the polarization effect which leads to a better stop-band use filters. To a better comprehension a brief review on the basics of the SOI and the integrated Bragg grating ends up with the fabrication techniques and some of its applications will be presented in both parts, until the end of both the third and the fourth chapters to some results which hopefully make its precedent explanations easier to deal with.

Climate change in Libya and desertification of Jifara Plain

The study was arranged to manifest its objectives through preceding it with an intro-duction. Particular attention was paid in the second part to detect the physical settings of the study area, together with an attempt to show the climatic characteristics in Libya. In the third part, observed temporal and spatial climate change in Libya was investigated through the trends of temperature, precipitation, relative humidity and cloud amount over the peri-ods (1946-2000), (1946-1975), and (1976-2000), comparing the results with the global scales. The forth part detected the natural and human causes of climate change concentrat-ing on the greenhouse effect. The potential impacts of climate change on Libya were ex-amined in the fifth chapter. As a case study, desertification of Jifara Plain was studied in the sixth part. In the seventh chapter, projections and mitigations of climate change and desertification were discussed. Ultimately, the main results and recommendations of the study were summarized. In order to carry through the objectives outlined above, the following methods and approaches were used: a simple linear regression analysis was computed to detect the trends of climatic parameters over time; a trend test based on a trend-to-noise-ratio was applied for detecting linear or non-linear trends; the non-parametric Mann-Kendall test for trend was used to reveal the behavior of the trends and their significance; PCA was applied to construct the all-Libya climatic parameters trends; aridity index after Walter-Lieth was shown for computing humid respectively arid months in Libya; correlation coefficient, (after Pearson) for detecting the teleconnection between sun spot numbers, NAOI, SOI, GHGs, and global warming, climate changes in Libya; aridity index, after De Martonne, to elaborate the trends of aridity in Jifara Plain; Geographical Information System and Re-mote Sensing techniques were applied to clarify the illustrations and to monitor desertifi-cation of Jifara Plain using the available satellite images MSS, TM, ETM+ and Shuttle Radar Topography Mission (SRTM). The results are explained by 88 tables, 96 figures and 10 photos. Temporal and spatial temperature changes in Libya indicated remarkably different an-nual and seasonal trends over the long observation period 1946-2000 and the short obser-vation periods 1946-1975 and 1976-2000. Trends of mean annual temperature were posi-tive at all study stations except at one from 1946-2000, negative trends prevailed at most stations from 1946-1975, while strongly positive trends were computed at all study stations from 1976-2000 corresponding with the global warming trend. Positive trends of mean minimum temperatures were observed at all reference stations from 1946-2000 and 1976-2000, while negative trends prevailed at most stations over the period 1946-1975. For mean maximum temperature, positive trends were shown from 1946-2000 and from 1976-2000 at most stations, while most trends were negative from 1946-1975. Minimum tem-peratures increased at nearly more than twice the rate of maximum temperatures at most stations. In respect of seasonal temperature, warming mostly occurred in summer and au-tumn in contrast to the global observations identifying warming mostly in winter and spring in both study periods. Precipitation across Libya is characterized by scanty and sporadically totals, as well as high intensities and very high spatial and temporal variabilities. From 1946-2000, large inter-annual and intra-annual variabilities were observed. Positive trends of annual precipi-tation totals have been observed from 1946-2000, negative trends from 1976-2000 at most stations. Variabilities of seasonal precipitation over Libya are more strikingly experienced from 1976-2000 than from 1951-1975 indicating a growing magnitude of climate change in more recent times. Negative trends of mean annual relative humidity were computed at eight stations, while positive trends prevailed at seven stations from 1946-2000. For the short observation period 1976-2000, positive trends were computed at most stations. Annual cloud amount totals decreased at most study stations in Libya over both long and short periods. Re-markably large spatial variations of climate changes were observed from north to south over Libya. Causes of climate change were discussed showing high correlation between tempera-ture increasing over Libya and CO2 emissions; weakly positive correlation between pre-cipitation and North Atlantic Oscillation index; negative correlation between temperature and sunspot numbers; negative correlation between precipitation over Libya and Southern Oscillation Index. The years 1992 and 1993 were shown as the coldest in the 1990s result-ing from the eruption of Mount Pinatubo, 1991. Libya is affected by climate change in many ways, in particular, crop production and food security, water resources, human health, population settlement and biodiversity. But the effects of climate change depend on its magnitude and the rate with which it occurs. Jifara Plain, located in northwestern Libya, has been seriously exposed to desertifica-tion as a result of climate change, landforms, overgrazing, over-cultivation and population growth. Soils have been degraded, vegetation cover disappeared and the groundwater wells were getting dry in many parts. The effect of desertification on Jifara Plain appears through reducing soil fertility and crop productivity, leading to long-term declines in agri-cultural yields, livestock yields, plant standing biomass, and plant biodiversity. Desertifi-cation has also significant implications on livestock industry and the national economy. Desertification accelerates migration from rural and nomadic areas to urban areas as the land cannot support the original inhabitants. In the absence of major shifts in policy, economic growth, energy prices, and con-sumer trends, climate change in Libya and desertification of Jifara Plain are expected to continue in the future. Libya cooperated with United Nations and other international organizations. It has signed and ratified a number of international and regional agreements which effectively established a policy framework for actions to mitigate climate change and combat deserti-fication. Libya has implemented several laws and legislative acts, with a number of ancil-lary and supplementary rules to regulate. Despite the current efforts and ongoing projects being undertaken in Libya in the field of climate change and desertification, urgent actions and projects are needed to mitigate climate change and combat desertification in the near future.

Electronic properties of Van der Waals heterostructures

L’interazione spin-orbita (SOI) nel grafene è attualmente oggetto di intensa ricerca grazie alla recente scoperta di una nuova classe di materiali chiamati isolanti topologici. Questi materiali, la cui esistenza è strettamente legata alla presenza di una forte SOI, sono caratterizzati dall’interessante proprietà di avere un bulk isolante ed allo stesso tempo superfici conduttrici. La scoperta teorica degli isolanti topologici la si deve ad un lavoro nato con l’intento di studiare l’influenza dell’interazione spin-orbita sulle proprietà del grafene. Poichè questa interazione nel grafene è però intrinsecamente troppo piccola, non è mai stato possibile effettuare verifiche sperimentali. Per questa ragione, vari lavori di ricerca hanno recentemente proposto tecniche volte ad aumentare questa interazione. Sebbene alcuni di questi studi abbiano mostrato un effettivo aumento dell’interazione spin-orbita rispetto al piccolo valore intrinseco, sfortunatamente hanno anche evidenziato una consistente riduzione della qualità del grafene. L’obbiettivo che ci si pone in questa tesi è di determinare se sia possibile aumentare l’interazione spin-orbita nel grafene preservandone allo stesso tempo le qualità. La soluzione proposta in questo lavoro si basa sull’utilizzo di due materiali semiconduttori, diselenio di tungsteno WSe2 e solfuro di molibdeno MoS2, utilizzati da substrato su cui sopra verrà posizionato il grafene formando così un’eterostruttura -nota anche di “van der Waal” (vdW)-. Il motivo di questa scelta è dovuto al fatto che questi materiali, appartenenti alla famiglia dei metalli di transizione dicalcogenuri (TMDS), mostrano una struttura reticolare simile a quella del grafene, rendendoli ideali per formare eterostrutture e ancora più importante, presentano una SOI estremamente grande. Sostanzialmente l’idea è quindi di sfruttare questa grande interazione spin-orbita del substrato per indurla nel grafene aumentandone così il suo piccolo valore intrinseco.

Beyond Belief: Japanese Approaches to the Meaning of Religion

For several centuries, Japanese scholars have argued that their nation’s culture—including its language, religion and ways of thinking—is somehow unique. The darker side of this rhetoric, sometimes known by the English term “Japanism” (nihon-jinron), played no small role in the nationalist fervor of the late-nineteenth and early twentieth centuries. While much of the so-called “ideology of Japanese uniqueness” can be dismissed, in terms of the Japanese approach to “religion,” there may be something to it. This paper highlights some distinctive—if not entirely unique—features of the way religion has been categorized and understood in Japanese tradition, contrasting these with Western (i.e., Abrahamic), and to a lesser extent Indian and Chinese understandings. Particular attention is given to the priority of praxis over belief in the Japanese religious context. Des siècles durant, des chercheurs japonais ont soutenu que leur culture – soit leur langue, leur religion et leurs façons de penser – était en quelque sorte unique. Or, sous son jour le plus sombre, cette rhétorique, parfois désignée du terme de « japonisme » (nihon-jinron), ne fut pas sans jouer un rôle déterminant dans la montée de la ferveur nationaliste à la fin du XIXe siècle, ainsi qu’au début du XXe siècle. Bien que l’on puisse discréditer pour l’essentiel cette soi-disant « idéologie de l’unicité japonaise », la conception nippone de la « religion » constitue, quant à elle, un objet d’analyse des plus utiles et pertinents. Cet article met en évidence quelques caractéristiques, sinon uniques du moins distinctives, de la manière dont la religion a été élaborée et comprise au sein de la tradition japonaise, pour ensuite les constrater avec les conceptions occidentale (abrahamique) et, dans une moindre mesure, indienne et chinoise. Une attention toute particulière est ici accordée à la praxis plutôt qu’à la croyance dans le contexte religieux japonais.

3CAM - A NOVEL TERNARY CONTENT ADDRESSABLE MEMORY USING THREE-VALUED LOGIC

Content Addressable Memory (CAM) is a special type of Complementary Metal-Oxide-Semiconductor (CMOS) storage element that allows for a parallel search operation on a memory stack in addition to the read and write operations yielded by a conventional SRAM storage array. In practice, it is often desirable to be able to store a “don’t care” state for faster searching operation. However, commercially available CAM chips are forced to accomplish this functionality by having to include two binary memory storage elements per CAM cell,which is a waste of precious area and power resources. This research presents a novel CAM circuit that achieves the “don’t care” functionality with a single ternary memory storage element. Using the recent development of multiple-voltage-threshold (MVT) CMOS transistors, the functionality of the proposed circuit is validated and characteristics for performance, power consumption, noise immunity, and silicon area are presented. This workpresents the following contributions to the field of CAM and ternary-valued logic:• We present a novel Simple Ternary Inverter (STI) transistor geometry scheme for achieving ternary-valued functionality in existing SOI-CMOS 0.18µm processes.• We present a novel Ternary Content Addressable Memory based on Three-Valued Logic (3CAM) as a single-storage-element CAM cell with “don’t care” functionality.• We explore the application of macro partitioning schemes to our proposed 3CAM array to observe the benefits and tradeoffs of architecture design in the context of power, delay, and area.

Glacier mass balance reconstruction by sublimation induced enrichment of chemical species on Cerro Tapado (Chilean Andes)

A 36 m long ice core down to bedrock from the Cerro Tapado glacier (5536 m a.s.l, 30°08' S, 69°55' W) was analyzed to reconstruct past climatic conditions for Northern Chile. Because of the marked seasonality in the precipitation (short wet winter and extended dry summer periods) in this region, major snow ablation and related post-depositional processes occur on the glacier surface during summer periods. They include predominantly sublimation and dry deposition. Assuming that, like measured during the field campaign, the enrichment of chloride was always related to sublimation, the chemical record along the ice core may be applied to reconstruct the history of such secondary processes linked to the past climatic conditions over northern Chile. For the time period 1962–1999, a mean annual net accumulation of 316 mm water equivalent (weq) and 327 mm weq loss by sublimation was deduced by this method. This corresponds to an initial total annual accumulation of 539 mm weq. The annual variability of the accumulation and sublimation is related with the Southern Oscillation Index (SOI): higher net-accumulation during El-Niño years and more sublimation during La Niña years. The deepest part of the ice record shows a time discontinuity; with an ice body deposited under different climatic conditions: 290 mm higher precipitation but with reduced seasonal distribution (+470 mm in winter and –180 mm in summer) and –3°C lower mean annual temperature. Unfortunately, its age is unknown. The comparison with regional proxy data however let us conclude that the glacier buildup did most likely occur after the dry mid-Holocene.

IMPACT OF ENGINE CALIBRATION ON PM OXIDATION IN A CATALYZED PARTICULATE FILTER OVER A TRANSIENT CYCLE: A MODELLING STUDY

The combustion strategy in a diesel engine has an impact on the emissions, fuel consumption and the exhaust temperatures. The PM mass retained in the CPF is a function of NO2 and PM concentrations in addition to the exhaust temperatures and the flow rates. Thus the engine combustion strategy affects exhaust characteristics which has an impact on the CPF operation and PM mass retained and oxidized. In this report, a process has been developed to simulate the relationship between engine calibration, performance and HC and PM oxidation in the DOC and CPF respectively. Fuel Rail Pressure (FRP) and Start of Injection (SOI) sweeps were carried out at five steady state engine operating conditions. This data, along with data from a previously carried out surrogate HD-FTP cycle [1], was used to create a transfer function model which estimates the engine out emissions, flow rates, temperatures for varied FRP and SOI over a transient cycle. Four different calibrations (test cases) were considered in this study, which were simulated through the transfer function model and the DOC model [1, 2]. The DOC outputs were then input into a model which simulates the NO2 assisted and thermal PM oxidation inside a CPF. Finally, results were analyzed as to how engine calibration impacts the engine fuel consumption, HC oxidation in the DOC and the PM oxidation in the CPF. Also, active regeneration for various test cases was simulated and a comparative analysis of the fuel penalties involved was carried out.

IMPROVING STARTABILITY AND REDUCING EMISSIONS IN FLEXFUEL SPARK IGNITION DIRECT INJECTION VARIABLE CAM TIMING ENGINE

Experimental work and analysis was done to investigate engine startup robustness and emissions of a flex-fuel spark ignition (SI) direct injection (DI) engine. The vaporization and other characteristics of ethanol fuel blends present a challenge at engine startup. Strategies to reduce the enrichment requirements for the first engine startup cycle and emissions for the second and third fired cycle at 25°C ± 1°C engine and intake air temperature were investigated. Research work was conducted on a single cylinder SIDI engine with gasoline and E85 fuels, to study the effect on first fired cycle of engine startup. Piston configurations that included a compression ratio change (11 vs 15.5) and piston geometry change (flattop vs bowl) were tested, along with changes in intake cam timing (95,110,125) and fuel pressure (0.4 MPa vs 3 MPa). The goal was to replicate the engine speed, manifold pressure, fuel pressure and testing temperature from an engine startup trace for investigating the first fired cycle for the engine. Results showed bowl piston was able to enable lower equivalence ratio engine starts with gasoline fuel, while also showing lower IMEP at the same equivalence ratio compared to flat top piston. With E85, bowl piston showed reduced IMEP as compression ratio increased at the same equivalence ratio. A preference for constant intake valve timing across fuels seemed to indicate that flattop piston might be a good flex-fuel piston. Significant improvements were seen with higher CR bowl piston with high fuel pressure starts, but showed no improvement with low fuel pressures. Simulation work was conducted to analyze initial three cycles of engine startup in GT-POWER for the same set of hardware used in the experimentations. A steady state validated model was modified for startup conditions. The results of which allowed an understanding of the relative residual levels and IMEP at the test points in the cam phasing space. This allowed selecting additional test points that enable use of higher residual levels, eliminating those with smaller trapped mass incapable of producing required IMEP for proper engine turnover. The second phase of experimental testing results for 2nd and 3rd startup cycle revealed both E10 and E85 prefer the same SOI of 240°bTDC at second and third startup cycle for the flat top piston and high injection pressures. E85 fuel optimal cam timing for startup showed that it tolerates more residuals compared to E10 fuel. Higher internal residuals drives down the Ø requirement for both fuels up to their combustion stability limit, this is thought to be direct benefit to vaporization due to increased cycle start temperature. Benefits are shown for an advance IMOP and retarded EMOP strategy at engine startup. Overall the amount of residuals preferred by an engine for E10 fuel at startup is thought to be constant across engine speed, thus could enable easier selection of optimized cam positions across the startup speeds.

Wohnen und die Ökonomie des Raumes – L’habitat et l’économie de l’espace

Wohnen und Habitat sind entscheidende Aspekte des Alltagslebens in mikrohistorischer Hinsicht. korrespondierend mit der Ökonomie des Raumes stellen sie relevante Dimensionen und Produkte des Handelns in Gesellschaften auf der Makroebene dar. Die hier versammelten Beiträge zeugen von der Notwendigkeit der Erneuerung des Themenfeldes Wohnen in vielfältigen gesellschaftlichen, kulturellen und praxeologischen Perspektiven. Sie spannen den Bogen vom Spätmittelalter bis zur Gegenwart, von der entlegenen Burg bis zur Metropole. Sie stellen dabei Bezüge her zu den zeitgenössischen «turns and trends» der Forschung, zu den Debatten über Wohn-, Wirtschafts- und Haushaltsformen bis hin zu den Spannungen zwischen Raumökonomie und Sozialreform, Öffentlichkeit und privater Raum sowie Mobilität und Häuslichkeit.

Relations between adolescents' self-evaluations, time perspectives, motivation for school and their achievement in different countries and at different ages

The present study focused on the relations between the self-efficacy, social self-concept, time perspectives, school investment and academic achievement of students in four different European countries and in different adolescence periods. A total of 1623 students completed questionnaires. The relations between the concepts proved not to be specific to the Western or to the former Communist bloc countries studied. The expected general decline in investment and academic achievement over the adolescence period showed up in all four countries studied. Contrary to our hypothesis, however, this decline could not be explained by growing influences of either social self-concept or time perspectives regarding personal development on their investment. In fact, the effects of social self-concept were strongest for the youngest adolescence group. Students’ social self-concept was the best predictor for their investment, while self-efficacy proved to predict academic achievement best in all adolescence periods.

Climate Variability in West Antarctica Derived from Annual Accumulation-Rate Records from ITASE Firn/Ice Cores

Thirteen annually resolved accumulation-rate records covering the last similar to 200 years from the Pine Island-Thwaites and Ross drainage systems and the South Pole are used to examine climate variability over West Antarctica. Accumulation is controlled spatially by the topography of the ice sheet, and temporally by changes in moisture transport and cyclonic activity. A comparison of mean accumulation since 1970 at each site to the long-term mean indicates an increase in accumulation for sites located in the western sector of the Pine Island-Thwaites drainage system. Accumulation is negatively associated with the Southern Oscillation Index (Sol) for sites near the ice divide, and periods of sustained negative Sol (1940-42, 1991-95) correspond to above-mean accumulation at most sites. Correlations of the accumulation-rate records with sea-level pressure (SLP) and the SOI suggest that accumulation near the ice divide and in the Ross drainage system may be associated with the midlatitudes. The post-1970 increase in accumulation coupled with strong SLP-accumulation-rate correlations near the coast suggests recent intensification of cyclonic activity in the Pine Island-Thwaites drainage system.