(Table 1) Crystal sizes of measured samples

Due to experimental difficulties grain size distributions of gas hydrate crystallites are largely unknown in natural samples. For the first time, we were able to determine grain size distributions of six natural gas hydrates for samples retrieved from the Gulf of Mexico and from Hydrate Ridge offshore Oregon from varying depths. High-energy synchrotron radiation provides high photon fluxes as well as high penetration depth and thus allows for investigation of bulk sediment samples. The gas hydrate crystallites appear to be (log-) normally distributed in the natural samples and to be of roughly globular shape. The mean grain sizes are in the range from 300-600 µm with a tendency for bigger grains to occur in greater depth, possibly indicating a difference in the formation age. Laboratory produced methane hydrate, starting from ice and aged for 3 weeks, shows half a log-normal curve with a mean value of ~40 µm. This one order-of-magnitude smaller grain sizes suggests that care must be taken when transposing grain-size sensitive (petro-)physical data from laboratory-made gas hydrates to natural settings.

(Table 1) Crystal sizes of measured samples from the Bush Hill region in the Gulf of Mexico and from ODP Leg 204 at the Hydrate Ridge offshore Oregon

The grain sizes of gas hydrate crystallites are largely unknown in natural samples. Single grains are hardly detectable with electron or optical microscopy. For the first time, we have used high-energy synchrotron diffraction to determine grain sizes of six natural gas hydrates retrieved from the Bush Hill region in the Gulf of Mexico and from ODP Leg 204 at the Hydrate Ridge offshore Oregon from varying depth between 1 and 101 metres below seafloor. High-energy synchrotron radiation provides high photon fluxes as well as high penetration depth and thus allows for investigation of bulk sediment samples. Gas hydrate grain sizes were measured at the Beam Line BW 5 at the HASYLAB/Hamburg. A 'moving area detector method', originally developed for material science applications, was used to obtain both spatial and orientation information about gas hydrate grains within the sample. The gas hydrate crystal sizes appeared to be (log-)normally distributed in the natural samples. All mean grain sizes lay in the range from 300 to 600 µm with a tendency for bigger grains to occur in greater depth. Laboratory-produced methane hydrate, aged for 3 weeks, showed half a log-normal curve with a mean grain size value of c. 40 µm. The grains appeared to be globular shaped.

Geochemistry, grain sizes and radiocarbon age of sediment core Lz1005 from Amery Oasis, East Antarctica

The clay mineralogical composition of a 552 cm long sediment core from Lake Terrasovoje in Amery Oasis, East Antarctica, was analysed and compared with that in surface sediments from other locations in the vicinity. The lower part of the sediment core is formed by sub- and proglacial sediments with a dominance of smectite and illite, and lower amounts of kaolinite and chlorite. The upper part of the core is deposited after 12 500 cal yr bp and mainly composed of illite and kaolinite, with low amounts of smectite and chlorite, such as found in samples from rock outcrops and covering sediments throughout Amery Oasis. The clay composition in the lower section of core Lz1005 suggest that the basin of Lake Terrasovoje was filled by a 150-200 m thickened Nemesis Glacier prior to 12 500 cal yr bp rather than by local ice caps.

Bubble sizes in waters of the Atlantic Ocean

Typical size of bubbles obtained from cavitation inception pressure measured in the surface layer of the Atlantic Ocean in situ aboard R/V Professor Vize in 1971 and Nerey in 1973 are reported. These results do not contradict ones of bubble size measurements using optical or acoustical techniques. Variability of bubble size is discovered and described. This variability is related to passing from one geographical region to another (from 68°55'S to 61°52'N), to changes in depth (from 5 to 100 m) and in day time, as well as to spatial fluctuations within an aquatic area. It is suggested that, in addition to wave breaking, there is another source of bubbles at depth 10-20 m that associates with hydrobiological processes.

(Table 1) Mean sizes of Hydrobia ulvae juveniles in the littoral zone of the Chernaya Inlet (Kandalaksha Bay, White Sea) in July-September 1995

Based on observations and experiments carried out within the White Sea silty-sandy littoral zone in 1994-1997 data on biology of development and behavior of Hydrobia ulvae juveniles over water column and in sediments were obtained. Hydrobiid juveniles 0.125-0.150 mm in size appear in plankton during the second half of June and in two to three weeks they precipitate on sediments reaching 0.300-0.350 mm in size. Specific biological features of the White Sea hydrobiids are a short reproductive period and a short period of juvenile growth related to long under-ice time and decelerated warming of shallow waters. Distribution of juvenile individuals of H. ulvae is primarily determined by hydrodynamics and microtopography of the littoral zone. Redistribution of the juveniles permanently takes place, since all size groups of the juveniles are equally subjected to migration. During the first few weeks after settling mortality of juvenile mudsnails is 85%.

Cost/benefit study of effects of using several headform sizes in testing motorcycle helmets under Federal Motor Vehicle Safety Standard 218. Final report (Task I).

National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.

A complete catalogue of plates published by him, giving titles, prices, exact sizes, and names of the artists and engravers : a facsimile of the only copy known.

Mode of access: Internet.

A thesaurus feature for the EUREKA information retrieval system /

Thesis (M. S.)--University of Illinois at Urbana-Champaign.

Hosiery lengths and sizes.

Photocopy (positive) made in 1961 by the Office's Commodity Standards Division.

A book on guinea culture, covering every feature of mating, hatching, rearing, feeding, housing, marketing, cooking and serving.

Cover title: Guinea fowl.

[American lumber, standard sizes and grades.

Official grading rules and standard specifications for hard and soft woods issued by the Northern Hemlock and Hardwood Manufacturers Association, the Appalachian Hardwood Manufacturers, Inc., the West Coast Lumber Inspection Bureau, etc., etc.

Census of Scotland - 1861 : population tables and report : number of the inhabitants, families, children at school, houses, and rooms with windows, in the civil counties and parishes, registration counties and districts, burghs, towns, villages, and islands of Scotland : also a classification of families according to their sizes, the number of persons they contain, and their relative house accommodation : presented by command of Her Majesty to both houses of parliament.

"Errata": 1 p. atend.

Computer programs for assessing required mission sizes and damage to ground targets in tactical air current operations planning.

"Prepared under Contract AF 19(628)-4805 by the Cornell Aeronautical Laboratory, Inc., of Cornell University."

The type and copy computer: a scientific method to figure copy needed to fill specified space and to dertermine type sizes required,

Mode of access: Internet.