Solubilization profiles of metal ions from bioleaching of sewage sludge as a function of pH

Two patterns of solubilization of metal ions resulting from bioleaching of sewage sludge by sulphur-oxidizing Thiobacillus spp. were established as a function of pH. Chromium and copper ions required a pH of 2-3 to initiate their solubilization, whereas nickel and zinc ions had their solubilization initiated at pH 6-6.5. The patterns obtained were independent of the sludge solids concentrations investigated (10, 17, 25, 32.5 and 40 g l(-1)).

Efeito de parâmetros analíticos sobre a precisão de métodos de extração de zinco do solo

Fifteen soil samples and four extradants (DTPA, Na 2EDTA, HCl and Mehlich 1) were used to study soil extraction methods for available zinc. Each extradant was studied in three soil:solution ratios (1:2, 1:4 and 1:10) and in three extraction periods in the ratio most frequently used. The zinc extracted by DTPA, Na 2EDTA and HCl was not affected by use of soil:solution ratios 1:2 and 1:4, but the amount extracted increased with the 1:10 ratio. In this relation, the variation coefficients increased. With Mehlich, no definite tendency was observed. The increase of extraction period for DTPA extractant, in 1:2 ratio, had little effect on the amount of zinc extracted and on the precision. As to Na 2EDTA extractant in 1:10 ratio, with the increase of extraction time, both increased. As to HCl and Mehlich, both in 1:4 ratio, the increase in extraction period had no effect on the amount of zinc extracted and no definite effect on the precision. Thus, the use of 1:2 ratio for DTPA and Na 2EDTA and 1:4 ratio for acid extractants is recommended. Concerning the period of extraction, 120 min should be used with DTPA and Na 2EDTA, 15 min with HCl and 5 min with Mehlich.

Níveis críticos de fósforo no solo e nas folhas para a implantação de Eucalyptus grandis Hill ex Maiden, em quatro tipos de solos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Recuperação de povoamento de Eucalyptus urophylla com aplicações de nitrogênio, potássio e calcário dolomítico

A plantation of Eucalyptus urophylla, established in 1984 on a Quartzpsamment Soil, at Altinopolis, São Paulo State, presented in 1989 an medium increment of the cylindrical volume of the trees of 13.97 m 3/ha/year and also showed deficiency symptoms of potassium, calcium and magnesium. At 4.33 years after planting were applied two doses of nitrogen (0 and 10 g/tree of N), potassium (0 and 20 g/tree of K 2O) and of dolomitic lime (0 and 500 g/tree), combined in a randomized block design arranged in a factorial way (2 × 2 × 2), with four replications, in order to study the recuperation of the tree growth rate. Evaluations of the trees growth were performed at 4.33, 5.67, 6.75 and at 7.58 years when cutting the plantation was done. The soil fertility and leaf concentrations of N, K, Ca and Mg were analyzed before and after the application of the treatments. The accumulation and distribution of biomass and of these nutrients in the tree components and in the litter, and the economic studies referring to the volumes of wood were also evaluated 7.58 years after planting. Potassium fertilization increased the mass of potassium in stemwood, stembark, foliage, fruits and litter, but the increase was greater in foliage and in the stembark. Liming increased the mass of magnesium in stemwood, stembark, foliage and litter, but the increase was greater in the litter. There was no isolated effect of nitrogen fertilization. The growth rate of trees was recovered with the potassium application, which increased the mean annual increment (MAI) of cylindrical volume from 13.85 m 3/ha/year without fertilizer to 16.82 m 3/ha/year. At 7.58 years after planting, there was observed an effect of the N x K x dolomitic lime interaction in the wood production. In the absence of nitrogen and dolomitic lime, the application of potassium increased the real volume of 43% and there was a gain of US$ 86.79/ha.

Assessment of anaerobic sewage sludge quality for agricultural application after metal bioleaching

The effects of metal bioleaching on nutrient solubilization, especially nitrogen and phosphorous, from anaerobically-digested sewage sludge were investigated in this work. The assessment of the sanitary quality of the anaerobic sludge after bioleaching was also carried out by enumerating indicator (total coliforms, fecal coliforms, and fecal streptococci) and total heterotrophic bacteria. The experiments of bioleaching were performed using indigenous sulphur-oxidizing bacteria (Thiobacillus spp.) as inoculum and samples of anaerobically-digested sludge. Nitrogen and phosphorous solubilization from sewage sludge was assessed by measuring, respectively, the concentration of Total Kjeldahl Nitrogen, ammonia, nitrate/nitrite, and soluble and total phosphorous before and after the bioleaching assays. At the end of the experiment, after 4 days of incubation (final pH of 1.4), the following metal solubilization yields were obtained: zinc, 91%; nickel, 87%; copper, 79%; lead, 52%; and chromium, 42%. As a result of sludge acidification, the viable counts of selected indicator bacteria were decreased to below the detection limit (4 × 103 cfu 100 ml-1), followed by an increase in the mineral fraction of nitrogen (from 6 to 10%) and in the soluble fraction of phosphorous (from 15 to 30%). Although some loss of sludge nutrients can occur during solid-liquid separation following bioleaching, its beneficial effects as metal removal and reduction of pathogenic bacteria are sufficient to consider the potential of this treatment before sludge disposal onto agricultural fields.

Thermodynamic analysis of direct steam reforming of ethanol in molten carbonate fuel cell

Fuel cell as MCFC (molten carbonate fuel cell) operate at high temperatures, and due to this issue, cogeneration processes may be performed, sending heat for own process or other purposes as steam generation in an industry. The use of ethanol for this purpose is one of the best options because this is a renewable and less environmentally offensive fuel, and cheaper than oil-derived hydrocarbons (in the case of Brazil). In the same country, because of technical, environmental and economic advantages, the use of ethanol by steam reforming process have been the most investigated process. The objective of this study is to show a thermodynamic analysis of steam reforming of ethanol, to determine the best thermodynamic conditions where are produced the highest volumes of products, making possible a higher production of energy, that is, a most-efficient use of resources. To attain this objective, mass and energy balances are performed. Equilibrium constants and advance degrees are calculated to get the best thermodynamic conditions to attain higher reforming efficiency and, hence, higher electric efficiency, using the Nernst equation. The advance degree of reforming increases when the operation temperature also increases and when the operation pressure decreases. But at atmospheric pressure (1 atm), the advance degree tends to the stability in temperatures above 700°C, that is, the volume of supplemental production of reforming products is very small for the high use of energy resources necessary. Reactants and products of the steam-reforming of ethanol that weren't used may be used for the reforming. The use of non-used ethanol is also suggested for heating of reactants before reforming. The results show the behavior of MCFC. The current density, at same tension, is higher at 700°C than other studied temperatures as 600 and 650°C. This fact occurs due to smaller use of hydrogen at lower temperatures that varies between 46.8 and 58.9% in temperatures between 600 and 700°C. The higher calculated current density is 280 mA/cm 2. The power density increases when the volume of ethanol to be used also increases due to higher production of hydrogen. The highest produced power at 190 mW/cm 2 is 99.8, 109.8 and 113.7 mW/cm2 for 873, 923 and 973K, respectively. The thermodynamic efficiency has the objective to show the connection among operational conditions and energetic factors, which are some parameters that describes a process of internal steam reforming of ethanol.

O uso da silagem de subprodutos da filetagem de peixe na alimentação de suínos em crescimento - parâmetros séricos

The study was carried out to evaluate the inclusion of increasing levels (0, 3,0 and 6.0%) of fish silage (SSFP), in the ration. The parameters studied were urea, uric acid, total protein, triglycerides, total cholesterol and lipoproteins (LDL, HDL and VLDL). Eighteen female piglets Moura weighting and crossbred Duroc x Moura, were used with 24,0± 3,0 kg in average weight and 90 days of age and eighteen male pigs Moura and crossbred Duroc x Moura, with 31,5±5,0 kg in average weight and 70 days of age in a randomized design with 3 treatments. The results showed no effect to the addition up to 6,0% of SSPF in the swine diet neither for in growth, nor to the serum parameters, even if had been found alteratum on the urea plasmatic concentrations experiments. All the parameters was closed to the normal value recommended in the literature.

Estabilidad macroeconómica real y la cuenta de capitales en Chile y Colombia

Incluye Bibliografía

Real macroeconomic stability and the capital account in Chile and Colombia

Includes bibliography

Mercury, copper, and zinc concentrations in extracted human teeth

Amalgam has been used as a filling material for over 150 years. Mercury, copper, and zinc are present in restoration. The aim of this study was to compare mercury, copper, and zinc concentrations in extracted human teeth with amalgam restorations and teeth without restorations. Thirty-two teeth, 15 restored with dental amalgam and 17 without restorations, were chemically analyzed in an Optima 3300 DV (Perkin Elmer) plasma emission spectrometer. Mercury, copper, and zinc were found in human teeth regardless of the presence of amalgam restorations. The highest mercury concentrations were found in the coronary portions of the teeth with amalgam restorations. Copper concentrations were very high. Zinc concentrations in the teeth without restoration were lower than those seen in the coronary portion of the teeth with restorations. © 2009 Heldref Publications.

Vascularização arterial e venosa do linfonodo poplíteo em cães

Poplíteo lympho nodes in the dogs is placed, to the right and the left in popliteo an appointed space fossa, in distal part of the muscles femoral biceps, laterally and semi-tendinous, medially, projecting in the height of the face volume of the joint to femoro tibial e femoro patellar (joint of the knee). In this study twenty and five dogs, males and females adult, originating the Araçatuba municipal kennel had been used whose captures had been effected by the animal sanitary defense of this city. The arterial vessels destined to this structure always derive, of both the sides, the femoral artery distal volume and vary of 10 the 1, more frequently of 2 (7 times, 28%) to the right and of 6 the 2, equally more frequently of 2 (8 times, 32%). So soon as one has still to right 5 and 6 branches (3 times, 12%), 1, 7 and 10 (1 time, 4%). Relatively to the veins derived from this lympho nodes, always converges to the lateral safena vein, these vessels oscillates between 9 and 2, more frequently of 3 (6 times, 24%), to the right and of 12 the 2, more frequently of 3 (10 times, 40%) to the left. Thus, others deriving branches of popliteo lympho nodes right and that if they insert in the above-mentioned vein are in number of 2 and 5 (5 times, 20%), 4 and 6 (2 times, 8%) and 8 and 9 (1 time, 4%). In spite of, to the left side it is examined in number de 2 branches (6 times, 24%), 4 (4 times, 16%), 6 (3 times, 12%) and finishing 9 and 12 branches (1 time, 4%). The size of popliteo lympho node in seropositive dogs for Visceral Leishmaniasis can meets enters 7,8 × 3,8 × 6,1 a 50,0 × 20,7 × 28,5, in mm, being average 26,18 × 10,5 × 15,97 mm for right and 26,98 × 11,14 × 15,25 mm for left (concerning the measures dorsoventral, latero-lateral and cranial-caudal, respectively).

Manejo de auge y crisis financieras internacionales

Incluye Bibliografía

Taxa de deposição de tecidos corporais de novilhas Nelore e suas cruzas com Angus e Simental

The objective of this work was to evaluate deposition pattems of body tissues of Nellore and crossbreed with Angus and Simmental heifers. Fifty seven heifers (19 Nellore, 19 Angus and 19 Simmental) were used, being 12 heifers (four in each genetic group) slaughtered before the beginning of the experiment as the baseline group. Thirty six (twelve in each genetic group) were ad libitun fed with 30 (six in each group) and 50% (six in each group) of dry matter diet in concentrate. The animals were in a completely randomized design, 3x2 factorial (tree genetic group and two diet), with six replicates per treatment. Nine remaining animals were used for a digestibility trial. At the end of the experiment all these animals were slaughtered and its corporal composition determined. The percentage of subcutaneous fat was greater for Angus heifers. Chemical constituents of empty body weight and empty body gain there did not suffer effects of genetic group. The crossing between Nellore and Angus, as well as the level of concentrate improve carcass characteristics and pattern of deposition of body tissues.

Hydrogen production by biogas steam reforming: A technical, economic and ecological analysis

Fuel cells are electrochemical energy conversion devices that convert fuel and oxidant electrochemically into electrical energy, water and heat. Compared to traditional electricity generation technologies that use combustion processes to convert fuel into heat, and then into mechanical energy, fuel cells convert the hydrogen and oxygen chemical energy into electrical energy, without intermediate conversion processes, and with higher efficiency. In order to make the fuel cells an achievable and useful technology, it is firstly necessary to develop an economic and efficient way for hydrogen production. Molecular hydrogen is always found combined with other chemical compounds in nature, so it must be isolated. In this paper, the technical, economical and ecological aspects of hydrogen production by biogas steam reforming are presented. The economic feasibility calculation was performed to evaluate how interesting the process is by analyzing the investment, operation and maintenance costs of the biogas steam reformer and the hydrogen production cost achieved the value of 0.27 US$/kWh with a payback period of 8 years. An ecological efficiency of 94.95%, which is a good ecological value, was obtained. The results obtained by these analyses showed that this type of hydrogen production is an environmentally attractive route. © 2013 Elsevier Ltd.

Modelo experiemtal de neotrquéia em coelho utilizando técnicas de engenharia de tecidos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)