A description of mercury in fishes from the Madeira River Basin, Amazon, Brazil

Over the last 20 years several projects carried on the Madeira River basin in the Amazon produced a great amount data on total Hg concentration in different fish species. In this paper we discuss temporal trends in Hg contamination and its relation to body weight in some of those fishes, showing that even within similar groups, such as carnivorous and non-migratory fish, the interspecies variability in Hg accumulation is considerable.

Development of a dextrin-based hydrogel for bone regeneration

[Excerpt] Bone tissue engineering is a very challenging and promising field, which handles with the limitations of bone regenerative capacity and the failure of current orthopedic implants [1]. This work describes the preparation and characterization of an injectable dextrin-based hydrogel (oDex) able to incorporate nanoparticles, cells, biomolecules or Bonelike~ granules [2]. (...)

Influence of design parameters on the mechanical behavior and porosity of braided fibrous stents

In spite of all innovations in stent design, commonly used metallic stents present several problems such as corrosion, infection and restenosis, leading to health complications or even death of patients. In this context, the present paper reports a systematic investigation on designing and development of 100% fiber based stents, which can eliminate or minimize the problems with existing metallic stents. For this purpose, braided stents were produced by varying different materials, structural and process parameters such as mono-filament type and diameter, braiding angle and mandrel diameter. The influence of these design parameters on mechanical behavior as well as stent's porosity was thoroughly investigated, and suitable parameters were selected for developing a stentwith mechanical characteristics and porosity matching with the commercial stents. According to the experimental results, the best performance was achieved with a polyester stent designed with 0.27 mm monofilament diameter, braiding angle of 35° and mandrel diameter of 6 mm, providing similar properties to commercial Nitinol stents.

Gêneros Euastrum Ehrenberg ex Ralfs e Micrasterias C. Agardh (Conjugatophyceae-Desmidiaceae) de dois ambientes amazônicos de águas pretas (Manaus, Amazonas-Brasil)

Foi realizado um inventário das espécies dos gêneros Euastrum Ehrenberg ex Ralfs e Micrasterias C.Agardh de dois ambientes de águas pretas do município de Manaus, um lago de inundação (lago Tupé), e o rio Negro. As coletas foram realizadas com rede de plâncton em quatro estações no lago e uma no rio Negro, situada próxima ao lago. Um total de 93 amostras foi analisado, coletadas em escala mensal no período de março de 2002 a outubro de 2003. As espécies foram descritas e ilustradas com base na sua morfologia e morfometria. Um total de 12 espécies foi identificado, sendo cinco do gênero Euastrum (E. evolutum var. perornatum; E. gemmatum var. monocyclum; E. ornans; E. sinuosum e E. spinulosum), e sete do gênero Micrasterias (M. borgei; M. radiata var. brasiliensis; M. torreyi; M. laticeps var. acuminata; M. mahabuleshwarensis var. amazonensis; M. rotata var. rotata; M. siolii). Todas as espécies, exceto M. radiata Hassal var. brasiliensis Grönblad, foram registradas no rio Negro, enquanto no lago Tupé foi registrado, no geral, apenas sete espécies, três de Euastrum e quatro de Micrasterias.

Antibacterial properties of fibrous stents coated with silver oxide nanocoatings

Stents are rigid and perforated tubular structures, which are inserted into blood vessels in order to prevent or inhibit the constriction of blood flow, restoring the normal blood flow, when blood vessels are clogged, being used in 70% of angioplasties. These medical devices assume great importance in the treatment of cardiovascular diseases (CVD) which are the leading cause of death worldwide. In the European Union CVD account for 40% of deaths and assume an estimated annual cost of 196 billion euros[1]. Stents must possess certain requirements, in order to, adequately, perform its function, such as biocompatibility (so that its use does not c ause damage on the health of its user), mechanical strength, radiopacity (so that it is easy to view), longitudinal flexibility, ease of handling, corrosion resistance and having high strength and high radial expansion ability to recover. Stents can be made of different materials, but metals, particularly stainless steel, are the most common. However, metallic stents present several dRawbacks such as corrosion and restenosis, leading to health complications for the patient, or even death. In order to minimize these disadvantages, new materials, like fibrous materials, have been used [2]. Monofilaments present high potential for stents development because, in addition to its biocompatibility, these materials allow the application of various surface treatments, such as antibacterial coatings. Furthermore, monofilament exhibit excellent mechanical properties, like greater stiffness and good results when subjected to compression, tensile and bending forces, since these forces will be directly supported by the monofilament [3]. To minimize the reaction of the human body and Limit the adhesion of microorganisms to the stent surface, some coatings have been developed, including the use of novel metals with antimicrobial properties, like silver. The main objective of this study was the development of fibrous stents, incorporation of silver oxide nanocoating. For the development of the stent, polyester monofilaments with 0.27mm of diameter were used in braiding technology, with a mandrel diameter of 6mm and a braiding angle of 35⁰. The mechanical behaviour of the stent were evaluated by mechanical testing under longitudinal and radial compression, bending. The results of compressive strength tests are according with value from literature: 1.13 to 2.9 N for radial compression and 0. 16-5.28N to longitudinal compression. From literature is also possible to verify that stents must present 75% of unchanged diameter during the bending test and must possess a porosity between 70% and 80% [4]. The produced polyester stent presents values of 1.29N for radial compression, 0.23N for longitudinal compression, 80% of porosity and 85.5% of unchanged diameter, during bending tests. For the antibacterial functionalization, silver oxide nanocoatings were prepared, through reactive magnetron g, with an Ag target in an Ar +O2 atmosphere. In order to evaluate the nanostructure and morphology of the coatings, d ifferent technique s like X-ray diffraction (XRD), scanning electron microscopy (SEM) and and X- ray photoelectron spectroscopy (XPS were used. From the analyses of XRD it is possible to verify that the peaks corresponds to planes of Ag2 O and MATERIAIS 2015 Porto, 21-23 June, 2015 characterize a cubic phase. The presence of Ag2 O is corroborated by XPS spectrum, where it is possible to observe silver, not only, in oxide state, but a lso in mettalic state, and it is possible to verify the presence of silver clusters, confirmed by SEM analysis. Films’ roughness and topography, parameters influencing the wettability of the surface and microorganism adhesion, were measured by Atomic Force Microscopy (AFM), and it was observed that the roughness is very low (under 10 nm). Coatings’ hydrophobicity and surface tension parameters were determined by contact angle measurement, and it was verified the hydrophobic behavior of the coatings. For antibacterial tests were used Staphylococcus epidermidis strain (IE186) and Staphylococcus aureus(ATCC 6538), and halo inhibition zone tests were realized. Ag+release rates were studied by means of inductively coupled plasma mass spectrometry (ICP -MS). The obtained results suggest that silver oxide coatings do not modify significantly surface properties of the substrate, like hydrophobicity and roughness, and present antimicrobial properties for both bacteria used.

Aproveitamento do Óleo das Amêndoas de Tucumã do Amazonas na Produção de Biodiesel

A falta de disponibilidade de energia elétrica é um dos principais motivos pelo baixo Índice de Desenvolvimento Humano das comunidades isoladas localizadas na Amazônia. O biodiesel produzido a partir de óleos vegetais extraídos de espécies oleaginosas nativas de forma sustentada é uma das melhores alternativas energéticas para a região. O tucumã do amazonas, Astrocaryum aculeatum, é uma espécie de palmeira que produz um fruto muito apreciado na região, a partir do qual se obtém uma amêndoa com alto teor de óleo. Nesse estudo, foi avaliada a produção de biodiesel etílico, a partir de diferentes lotes de óleos de tucumã do amazonas, com índices de acidez baixos e elevados, pela transesterificação por catálise básica e ácida homogêneas, respectivamente. Na catálise ácida, foram testados HCl e H2SO4 como catalisadores nas concentrações de 0,0625 a 1,000 M, empregando etanol hidratado na proporção molar de 1:6 e a reação conduzida a 90 ºC por 24 h. Na catálise básica, foram testados NaOH e KOH, nas proporções de 0,5 a 2,0 %, empregando etanol anidro na proporção molar de 1:12 e a reação conduzida a 80 ºC por 2 h. O biodiesel obtido em cada experimento foi analisado por métodos físicos (massa específica) e cromatográficos (CLAE em fase reversa). Análises cromatográficas indicaram que as melhores conversões foram alcançadas por amostras de biodiesel com massas específicas inferiores a 0,87 g.cm-1. As amostras de biodiesel obtidas com melhor qualidade foram obtidas utilizando-se os catalisadores ácidos a 1,0 M com rendimentos superiores a 90%. No caso da catálise básica, obteve-se biodiesel de boa qualidade empregando-se o catalisador NaOH a 2,0%, porém com rendimento inferior a 60 %. Contudo, em ambos os casos, foi possível identificar um excelente potencial de produção de biocombustível, a partir do óleo das amêndoas de tucumã.

On the Hill estimator: a comparison of methods

Extreme value theory (EVT) deals with the occurrence of extreme phenomena. The tail index is a very important parameter appearing in the estimation of the probability of rare events. Under a semiparametric framework, inference requires the choice of a number k of upper order statistics to be considered. This is the crux of the matter and there is no definite formula to do it, since a small k leads to high variance and large values of k tend to increase the bias. Several methodologies have emerged in literature, specially concerning the most popular Hill estimator (Hill, 1975). In this work we compare through simulation well-known procedures presented in Drees and Kaufmann (1998), Matthys and Beirlant (2000), Beirlant et al. (2002) and de Sousa and Michailidis (2004), with a heuristic scheme considered in Frahm et al. (2005) within the estimation of a different tail measure but with a similar context. We will see that the new method may be an interesting alternative.

Maternidade e parentalidade: reconfigurações e conflitos ideológicos

(Excerto) A construção da maternidade como o acto paradigmático de cuidado adequado deve ser vista como uma construção cultural específica. É comum conceber o cuidado como uma relação entre duas pessoas e especialmente como uma relação entre mãe e filho. Como observa Joan Tronto, uma tal compreensão conduziu frequentemente à idealização deste duo que se converteu numa espécie de casal romântico no discurso contemporâneo ocidental sobre a maternidade (Tronto, 1993, pp. 103, 109-110). A ênfase ideológica na díade mãe/filho subsiste, não obstante revestir-se de novos cambiantes e ser paralela à valorização da paternidade reflectida numa diversidade de estudos (e.g. Monteiro & Domingos, 2013; Torres, 2002) e nas práticas sociais.

Clear cell adenocarcinoma of the cervix in a young woman: a diagnostic challenge

Clear cell adenocarcinoma of the cervix is a rare tumor, classically related with in utero diethylstilbestrol (DES) exposure. The authors report a rare case of clear cell adenocarcinoma of the cervix in a 21-yearold woman who had no history of in utero DES exposure, presenting with intermittent vaginal bleeding. It stresses the relevance to always clarify the etiology of abnormal genital bleeding and consider the possibility of cervicovaginal tumors.

Incidência de leishmaniose tegumentar americana no norte de Mato Grosso entre 2001 e 2008

A incidência da Leishmaniose Tegumentar Americana registrada no Escritório Regional de Saúde de Sinop o qual abrangem 17 municípios foi analisada considerando os números de casos notificados por município, sexo, faixa etária e sazonalidade. A coleta das informações foi obtida no Sistema Nacional de Agravos de Notificação entre 2001 e 2008. Foi calculada a incidência da doença em cada município. Para avaliar a influência da sazonalidade sobre a LTA, foram usados os dados de janeiro de 2001 a dezembro de 2008. Os coeficientes de detecção para os anos de 2001 a 2008 foram maiores nos municípios de Nova Ubiratã (857,2 por 100.000 habitantes), Feliz Natal (834,5 por 100.000 habitantes) e Vera (557,0 por 100.000 habitantes). A média de incidência (334,9 por 100.000 habitantes) da ERS-Sinop foi 4,5 vezes maior que a média da região norte. A faixa etária mais acometida foi entre 20 e 49 anos em ambos os sexos e, sendo que o sexo masculino foi o mais acometido 64,78%. O número de casos registrados no período da seca foi de 60%. Grande parte da população da região está exposta ao contato direto com o vetor da Leishmania, principalmente devido a alguns tipos de atividades econômicas desenvolvidas na região tais como: O corte seletivo de madeira, a agropecuária e a mineração.

Development of hyaluronic acid, dextrin and extracellular matrix hydrogels for cell expansion

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Engenharia Clínica)

Litterfall production in intact and selectively logged forests in southern of Amazonia as a function of basal area of vegetation and plant density

Nutrient recycling in the forest is linked to the production and decomposition of litter, which are essential processes for forest maintenance, especially in regions of nutritionally poor soils. Human interventions in forest such as selecttive logging may have strong impacts on these processes. The objectives of this study were to estimate litterfall production and evaluate the influence of environmental factors (basal area of vegetation, plant density, canopy cover, and soil physicochemical properties) and anthropogenic factors (post-management age and exploited basal area) on this production, in areas of intact and exploited forest in southern Amazonia, located in the northern parts of Mato Grosso state. This study was conducted at five locations and the average annual production of litterfall was 10.6 Mg ha-1 year-1, higher than the values for the Amazon rainforest. There were differences in litterfall productions between study locations. Effects of historical logging intensity on litterfall production were not significant. Effects of basal area of vegetation and tree density on litterfall production were observed, highlighting the importance of local vegetation characteristics in litterfall production. This study demonstrated areas of transition between the Amazonia-Cerrado tend to have a higher litterfall production than Cerrado and Amazonia regions, and this information is important for a better understanding of the dynamics of nutrient and carbon cycling in these transition regions.

Predation of bat (Molossus molossus: Molossidae) by the centipede Scolopendra viridicornis (Scolopendridae) in Southern Amazonia

Centipedes are opportunistic carnivore predators, and large species can feed on a wide variety of vertebrates, including bats. The aim of this study was to report the third record of bat predation by centipedes worldwide, the first record in the Amazon region, while covering aspects of foraging, capture and handling of prey. We observed the occurence in a fortuitous encounter at Cristalino State Park, located in the Amazon region of the state of Mato Grosso, Brazil. The attack took place in a small wooden structure, at about three meters from the floor, and was observed for 20 minutes. During the observation, the centipede stung the neck and abdominal region of the bat several times, grabbing the prey with its 15 pairs of front legs while hanging from the ceiling with its hind legs. This type of observation suggests that vertebrates can be important preys for invertebrates such as giant centipedes, both for its nutritional composition and for the amount of energy available in a single prey.

Poly lactic acid based biodegradable stents and functionalization techniques: brief review

Commercial stents, especially metallic ones, present several disadvantages, and this gives rise to the necessity of producing or coating stents with different materials, like natural polymers, in order to improve their biocompatibility and minimize the disadvantages of metallic ones. This review paper discusses some applications of natural-based polymers in stents, namely polylactic acid (PLA) for stent development and chitosan for biocompatible coatings of stents . Furthermore, some effective stent functionalization techniques will be discussed, namely Layer by Layer (LBL) technique.

Chitosan-based scaffolds for tissue regeneration: preparation and microstructure characterization

Scaffolds are porous three-dimensional supports, designed to mimic the extracellular environment and remain temporarily integrated into the host tissue while stimulating, at the molecular level, specific cellular responses to each type of body tissues. The major goal of the research work entertained herein was to study the microstructure of scaffolds made from chitosan (Ch), blends of chitosan and sodium alginate (Ch/NaAlg), blends of chitosan, sodium alginate and calcium chloride (Ch/NaAlg/CaCl2) and blends of chitosan, sodium alginate and hydroxyapatite (Ch/NaAlg/HA). Scaffolds possessing ideal physicochemical properties facilitate cell proliferation and greatly increase the rate of recovery of a damaged organ tissue. Using CT three-dimensional images of the scaffolds, it was observed that all scaffolds had a porosity in the range 64%-92%, a radius of maximum pore occurrence in the range 95m-260m and a permeability in the range 1×10-10-18×10-10 m2. From the results obtained, the scaffolds based on Ch, Ch/NaAlg and Ch/NaAlg/CaCl2 would be most appropriate both for the growth of osteoid and for bone tissue regeneration, while the scaffold made with a blend of Ch/NaAlg/HA, by possessing larger pores size, might be used as a support for fibrovascular tissue.