"Right to Personal Liberty Under the Indian Constitution - With Special Reference to Judicial Process"

The nature and extent of protection secured to personal liberty has been a subject matter of great controversy and debate. The expression "procedure established by law" as a standard of protection for personal liberty has been looked upon as highly unsatisfactory and inadequate. For, unlike the specific attributes of liberty that are separately guaranteed under Art.19, ‘personal liberty‘ as guaranteed by Art.21 does not obligate the .Legislature to comply with the requirements of justice and reasonableness as and when it enchroaches upon that right. Though the concept of ‘personal liberty‘ has received an evolutive and expansive meaning through judicial process, the standard of protection which the judicial process could secure to personal liberty through the interpretation of Art.21 has been far from satisfactory Even after four decades of judicial process in the interpretation of Art.21 the problem of evolving a just and adequate standard of protection for personal liberty in that Article continues to be 21 crucial constitutional issue, craving for a. satisfactory solution. And the present study is a humble attempt to unravel this problem and to Search for a reasonable solution.

Changing Role of Academic Libraries in the E-learning Environment: Issues and Challenges

The development of computer and network technology is changing the education scenario and transforming the teaching and learning process from the traditional physical environment to the digital environment. It is now possible to access vast amount of information online and enable one to one communication without the confines of place or time. While E-learning and teaching is unlikely to replace face-to-face training and education it is becoming an additional delivery method, providing new learning opportunities to many users. It is also causing an impact on library services as the increased use of ICT and web based learning technologies have paved the way for providing new ICT based services and resources to the users. Online learning has a crucial role in user education, information literacy programmes and in training the library professionals. It can help students become active learners, and libraries will have to play a greater role in this process of transformation. The significance of libraries within an institution has improved due to the fact that academic libraries and information services are now responsible for e-learning within their organization.

Impact of process parameters on chitinase production by an alkalophilic marine Beau6eria bassiana in solid state fermentation

A chitinolytic fungus, Beau6eria bassiana was isolated from marine sediment and significant process parameters influencing chitinase production in solid state fermentation using wheat bran were optimised. The organism was strongly alkalophilic and produced maximum chitinase at pH 9·20. The NaCl and colloidal chitin requirements varied with the type of moistening medium used. Vegetative (mycelial) inoculum was more suitable than conidial inoculum for obtaining maximal enzyme yield. The addition of phosphate and yeast extract resulted in enhancement of chitinase yield. After optimisation, the maximum enzyme yield was 246·6 units g 1 initial dry substrate (U gIDS 1). This is the first report of the production of chitinase from a marine fungus.

Classification of Mammograms and DW T based Detection of Microcalcification

Cancer treatment is most effective when it is detected early and the progress in treatment will be closely related to the ability to reduce the proportion of misses in the cancer detection task. The effectiveness of algorithms for detecting cancers can be greatly increased if these algorithms work synergistically with those for characterizing normal mammograms. This research work combines computerized image analysis techniques and neural networks to separate out some fraction of the normal mammograms with extremely high reliability, based on normal tissue identification and removal. The presence of clustered microcalcifications is one of the most important and sometimes the only sign of cancer on a mammogram. 60% to 70% of non-palpable breast carcinoma demonstrates microcalcifications on mammograms [44], [45], [46].WT based techniques are applied on the remaining mammograms, those are obviously abnormal, to detect possible microcalcifications. The goal of this work is to improve the detection performance and throughput of screening-mammography, thus providing a ‘second opinion ‘ to the radiologists. The state-of- the- art DWT computation algorithms are not suitable for practical applications with memory and delay constraints, as it is not a block transfonn. Hence in this work, the development of a Block DWT (BDWT) computational structure having low processing memory requirement has also been taken up.

Assessment of Energy Conservation in Indian Cement Industry and Forecasting of Co2 Emissions

Cement industry ranks 2nd in energy consumption among the industries in India. It is one of the major emitter of CO2, due to combustion of fossil fuel and calcination process. As the huge amount of CO2 emissions cause severe environment problems, the efficient and effective utilization of energy is a major concern in Indian cement industry. The main objective of the research work is to assess the energy cosumption and energy conservation of the Indian cement industry and to predict future trends in cement production and reduction of CO2 emissions. In order to achieve this objective, a detailed energy and exergy analysis of a typical cement plant in Kerala was carried out. The data on fuel usage, electricity consumption, amount of clinker and cement production were also collected from a few selected cement industries in India for the period 2001 - 2010 and the CO2 emissions were estimated. A complete decomposition method was used for the analysis of change in CO2 emissions during the period 2001 - 2010 by categorising the cement industries according to the specific thermal energy consumption. A basic forecasting model for the cement production trend was developed by using the system dynamic approach and the model was validated with the data collected from the selected cement industries. The cement production and CO2 emissions from the industries were also predicted with the base year as 2010. The sensitivity analysis of the forecasting model was conducted and found satisfactory. The model was then modified for the total cement production in India to predict the cement production and CO2 emissions for the next 21 years under three different scenarios. The parmeters that influence CO2 emissions like population and GDP growth rate, demand of cement and its production, clinker consumption and energy utilization are incorporated in these scenarios. The existing growth rate of the population and cement production in the year 2010 were used in the baseline scenario. In the scenario-1 (S1) the growth rate of population was assumed to be gradually decreasing and finally reach zero by the year 2030, while in scenario-2 (S2) a faster decline in the growth rate was assumed such that zero growth rate is achieved in the year 2020. The mitigation strategiesfor the reduction of CO2 emissions from the cement production were identified and analyzed in the energy management scenarioThe energy and exergy analysis of the raw mill of the cement plant revealed that the exergy utilization was worse than energy utilization. The energy analysis of the kiln system showed that around 38% of heat energy is wasted through exhaust gases of the preheater and cooler of the kiln sysetm. This could be recovered by the waste heat recovery system. A secondary insulation shell was also recommended for the kiln in the plant in order to prevent heat loss and enhance the efficiency of the plant. The decomposition analysis of the change in CO2 emissions during 2001- 2010 showed that the activity effect was the main factor for CO2 emissions for the cement industries since it is directly dependent on economic growth of the country. The forecasting model showed that 15.22% and 29.44% of CO2 emissions reduction can be achieved by the year 2030 in scenario- (S1) and scenario-2 (S2) respectively. In analysing the energy management scenario, it was assumed that 25% of electrical energy supply to the cement plants is replaced by renewable energy. The analysis revealed that the recovery of waste heat and the use of renewable energy could lead to decline in CO2 emissions 7.1% for baseline scenario, 10.9 % in scenario-1 (S1) and 11.16% in scenario-2 (S2) in 2030. The combined scenario considering population stabilization by the year 2020, 25% of contribution from renewable energy sources of the cement industry and 38% thermal energy from the waste heat streams shows that CO2 emissions from Indian cement industry could be reduced by nearly 37% in the year 2030. This would reduce a substantial level of greenhouse gas load to the environment. The cement industry will remain one of the critical sectors for India to meet its CO2 emissions reduction target. India’s cement production will continue to grow in the near future due to its GDP growth. The control of population, improvement in plant efficiency and use of renewable energy are the important options for the mitigation of CO2 emissions from Indian cement industries

A study on semigroup action on fuzzy subsets, inverse fuzzy automata and related topics

This thesis comprises five chapters including the introductory chapter. This includes a brief introduction and basic definitions of fuzzy set theory and its applications, semigroup action on sets, finite semigroup theory, its application in automata theory along with references which are used in this thesis. In the second chapter we defined an S-fuzzy subset of X with the extension of the notion of semigroup action of S on X to semigroup action of S on to a fuzzy subset of X using Zadeh's maximal extension principal and proved some results based on this. We also defined an S-fuzzy morphism between two S-fuzzy subsets of X and they together form a category S FSETX. Some general properties and special objects in this category are studied and finally proved that S SET and S FSET are categorically equivalent. Further we tried to generalize this concept to the action of a fuzzy semigroup on fuzzy subsets. As an application, using the above idea, we convert a _nite state automaton to a finite fuzzy state automaton. A classical automata determine whether a word is accepted by the automaton where as a _nite fuzzy state automaton determine the degree of acceptance of the word by the automaton. 1.5. Summary of the Thesis 17 In the third chapter we de_ne regular and inverse fuzzy automata, its construction, and prove that the corresponding transition monoids are regular and inverse monoids respectively. The languages accepted by an inverse fuzzy automata is an inverse fuzzy language and we give a characterization of an inverse fuzzy language. We study some of its algebraic properties and prove that the collection IFL on an alphabet does not form a variety since it is not closed under inverse homomorphic images. We also prove some results based on the fact that a semigroup is inverse if and only if idempotents commute and every L-class or R-class contains a unique idempotent. Fourth chapter includes a study of the structure of the automorphism group of a deterministic faithful inverse fuzzy automaton and prove that it is equal to a subgroup of the inverse monoid of all one-one partial fuzzy transformations on the state set. In the fifth chapter we define min-weighted and max-weighted power automata study some of its algebraic properties and prove that a fuzzy automaton and the fuzzy power automata associated with it have the same transition monoids. The thesis ends with a conclusion of the work done and the scope of further study.

Microbial use of organic substrates and maize growth, especially in saline and alkaline soils of Pakistani Punjab

This thesis consists of 4 main parts: (1) impact of growing maize on the decomposition of incorporated fresh alfalfa residues, (2) relationships between soil biological and other soil properties in saline and alkaline arable soils from the Pakistani Punjab, (3) decomposition of compost and plant residues in Pakistani soils along a gradient in salinity, and (4) interactions of compost and triple superphosphate on the growth of maize in a saline Pakistani soil. These 4 chapters are framed by a General Introduction and a Conclusions section. (1) In the first study, the effects of growing maize plants on the microbial decomposition of freshly chopped alfalfa residues was investigated in a 90-day pot experiment using a sandy arable soil. Assuming that the addition of alfalfa residues did not affect the decomposition of native soil organic matter, only 27% of the alfalfa residues were found as CO2. This suggests that a considerable part of alfalfa-C remained undecomposed in the soil. However, only 6% of the alfalfa residues could be recovered as plant remains in treatment with solely alfalfa residues. Based on d13C values, it was calculated that plant remains in treatment maize + alfalfa residues contained 14.7% alfalfa residues and 85.3% maize root remains. This means 60% more alfalfa-C was recovered in this treatment. (2) In the second study, the interactions between soil physical, soil chemical and soil biological properties were analysed in 30 Pakistani soils from alkaline and saline arable sites differing strongly in salinisation and in soil pH. The soil biological properties were differentiated into indices for microbial activity, microbial biomass, and community structure with the aim of assessing their potential as soil fertility indices. (3) In the third study, 3 organic amendments (compost, maize straw and pea straw) were added to 5 Pakistani soils from a gradient in salinity. Although salinity has depressive effects on microbial biomass C, biomass N, biomass P, and ergosterol, the clear gradient according to the soil salt concentration was not reflected by the soil microbial properties. The addition of the 3 organic amendments always increased the contents of the microbial indices analysed. The amendment-induced increase was especially strong for microbial biomass P and reflected the total P content of the added substrates. (4) The fourth study was greenhouse pot experiment with different combinations of compost and triple superphosphate amendments to investigate the interactions between plant growth, microbial biomass formation and compost decomposition in a strongly saline Pakistani arable soil in comparison to a non-saline German arable soil. The Pakistani soil had a 2 times lower content of ergosterol, a 4 times lower contents of microbial biomass C, biomass N and biomass P, but nearly a 20 times lower content of NaHCO3 extractable P. The addition of 1% compost always had positive effects on the microbial properties and also on the content of NaHCO3 extractable P. The addition of superphosphate induced a strong and similar absolute increase in microbial biomass P in both soils.

Value Added by Quality Management

Abstract: Quality Management is an essential part of successful organisations. But the effect of it is mostly not directly visible. The effects are more indirect, and have a time lag till results appear. In today’s challenging times, all activities of an organisation have to proof their ability to add value. While Value Based Management is more focussed on financial value, other concepts and models like EFQM Excellence Model and Kaplan and Norton’s Balanced Score Card also point on values that are the basis and driver for financial success. Quality Management has to proof its effects on company values, and therefore the transacting mechanisms have to be identified and procedure to manage the process of Value Adding Quality Management has to be developed.

De la désorganisation à l’organisation apprenante en milieu rural

ZUSAMMENFASSUNG Von der „Chaosgruppe“ zur lernenden Organisation. Fallstudien zur Induzierung und Verbreitung von Innovation in ländlichen Kleinorganisationen im Buruli (Zentral-Uganda). Die oft fehlende Nachhaltigkeit landwirtschaftlicher Projekte in Afrika allgemein und in Buruli (Zentral-Uganda) insbesondere gab den Anstoß zu der Forschung, die der vorliegenden Dissertation zugrunde liegt. Ein häufiger Grund für das Scheitern von Projekten ist, dass die lokale Bevölkerung die landwirtschaftliche Innovation als Risiko für die Ernährungssicherheit der Familie betrachtet. Die vorliegende Arbeit ist daher ein Beitrag zur Suche nach einem Weg zur Nachhaltigkeit, der dieser Tatsache Rechnung trägt. Als Forschungsmethode wurden die Gruppendiskussion und die Beobachtung mit den beiden Varianten „teilnehmender Beobachter“ und „beobachtender Teilnehmer“ gemäß Lamnek(1995b) angewendet. Es stellte sich heraus, dass die ablehnende Haltung der Zielbevölkerung landwirtschaftlicher Innovation gegenüber durch finanzielle Anreize, Seminare oder die Überzeugungskunst von Mitarbeitern der Entwicklungsorganisationen kaum behoben werden kann, sondern nur durch den Einbezug der Menschen in einen von ihnen selbst gesteuerten Risikomanagementprozess. Die Prozessberatung von Schein (2000) und die nichtdirektive Beratung von Rogers (2010) haben sich im Rahmen unserer Untersuchung für die Motivierung der Bevölkerung für eine risikobewusste Entwicklungsinitiative von großem Nutzen erwiesen ebenso wie für die Beschreibung dieses Prozesses in der vorliegenden Studie. Die untersuchten Gruppen wurden durch diesen innovativen Ansatz der Entwicklungsberatung in die Lage versetzt, das Risiko von Innovation zu analysieren, zu bewerten und zu minimieren, ihre Zukunft selbst in die Hand zu nehmen und in einem sozialen, ökonomischen und physischen Umfeld zu gestalten sowie auf Veränderungen im Laufe der Umsetzung angemessen zu reagieren. Der Erwerb dieser Fähigkeit setzte eine Umwandlung einfacher Bauerngruppen ohne erkennbare Strukturen in strukturierte und organisierte Gruppen voraus, die einer lernenden Organisation im ländlichen Raum entsprechen. Diese Transformation bedarf als erstes eines Zugangs zur Information und einer zielorientierten Kommunikation. Die Umwandlung der Arbeitsgruppe zu einer lernenden Bauernorganisation förderte die Nachhaltigkeit des Gemüseanbauprojekts und das Risikomanagement und wurde so zu einem konkreten, von der Umwelt wahrgenommenen Beispiel für die Zweckmäßigkeit des oben beschriebenen Forschungsansatzes. Die Herausbildung einer lernenden Organisation ist dabei nicht Mittel zum Zweck, sondern ist selbst das zu erreichende Ziel. Die Beobachtung, Begleitung und Analyse dieses Umwandlungsprozesses erfordert einen multidisziplinären Ansatz. In diesem Fall flossen agrarwissenschaftliche, soziologische, linguistische und anthropologische Perspektiven in die partnerschaftlich ausgerichtete Forschung ein. Von der Entwicklungspolitik erfordert dieser Ansatz einen neuen Weg, der auf der Partnerschaft mit den Betroffenen und auf einer Entemotionalisierung des Entwicklungsvorhabens basiert und eine gegenseitige Wertschätzung zwischen den Akteuren voraussetzt. In diesem Prozess entwickelt sich im Laufe der Zeit die „lernende“ Bauernorganisation auch zu einer „lehrenden“ Organisation und wird dadurch eine Quelle der Inspiration für die Gesamtgesellschaft. Die Nachhaltigkeit von ländlichen Entwicklungsprojekten wird damit maßgeblich verbessert.

Value Stream Analysis and Mapping for Product Development

This paper explores the concept of Value Stream Analysis and Mapping (VSA/M) as applied to Product Development (PD) efforts. Value Stream Analysis and Mapping is a method of business process improvement. The application of VSA/M began in the manufacturing community. PD efforts provide a different setting for the use of VSA/M. Site visits were made to nine major U.S. aerospace organizations. Interviews, discussions, and participatory events were used to gather data on (1) the sophistication of the tools used in PD process improvement efforts, (2) the lean context of the use of the tools, and (3) success of the efforts. It was found that all three factors were strongly correlated, suggesting success depends on both good tools and lean context. Finally, a general VSA/M method for PD activities is proposed. The method uses modified process mapping tools to analyze and improve process.

Electrical Design: A Problem for Artificial Intelligence Research

This report outlines the problem of intelligent failure recovery in a problem-solver for electrical design. We want our problem solver to learn as much as it can from its mistakes. Thus we cast the engineering design process on terms of Problem Solving by Debugging Almost-Right Plans, a paradigm for automatic problem solving based on the belief that creation and removal of "bugs" is an unavoidable part of the process of solving a complex problem. The process of localization and removal of bugs called for by the PSBDARP theory requires an approach to engineering analysis in which every result has a justification which describes the exact set of assumptions it depends upon. We have developed a program based on Analysis by Propagation of Constraints which can explain the basis of its deductions. In addition to being useful to a PSBDARP designer, these justifications are used in Dependency-Directed Backtracking to limit the combinatorial search in the analysis routines. Although the research we will describe is explicitly about electrical circuits, we believe that similar principles and methods are employed by other kinds of engineers, including computer programmers.

Value Stream Analysis and Mapping for Product Development

This paper explores the concept of Value Stream Analysis and Mapping (VSA/M) as applied to Product Development (PD) efforts. Value Stream Analysis and Mapping is a method of business process improvement. The application of VSA/M began in the manufacturing community. PD efforts provide a different setting for the use of VSA/M. Site visits were made to nine major U.S. aerospace organizations. Interviews, discussions, and participatory events were used to gather data on (1) the sophistication of the tools used in PD process improvement efforts, (2) the lean context of the use of the tools, and (3) success of the efforts. It was found that all three factors were strongly correlated, suggesting success depends on both good tools and lean context. Finally, a general VSA/M method for PD activities is proposed. The method uses modified process mapping tools to analyze and improve process.

Process Variability in Micro-Embossing

A promising technique for the large-scale manufacture of micro-fluidic devices and photonic devices is hot embossing of polymers such as PMMA. Micro-embossing is a deformation process where the workpiece material is heated to permit easier material flow and then forced over a planar patterned tool. While there has been considerable, attention paid to process feasibility very little effort has been put into production issues such as process capability and eventual process control. In this paper, we present initial studies aimed at identifying the origins and magnitude of variability for embossing features at the micron scale in PMMA. Test parts with features ranging from 3.5- 630 µm wide and 0.9 µm deep were formed. Measurements at this scale proved very difficult, and only atomic force microscopy was able to provide resolution sufficient to identify process variations. It was found that standard deviations of widths at the 3-4 µm scale were on the order of 0.5 µm leading to a coefficient of variation as high as 13%. Clearly, the transition from test to manufacturing for this process will require understanding the causes of this variation and devising control methods to minimize its magnitude over all types of parts.

Estado del arte acerca de las discusiones teóricas sobre soberanía del estado y la unión monetaria europea entre 2002 - 2010. Caso: El Reino Unido

El siguiente trabajo tiene como objetivo el Estado del arte acerca de la discusión teórica de la repercusión de la unión monetaria en el principio de soberanía nacional, específicamente el caso de Gran Bretaña, ya que éste es el único país que expresa abiertamente su incertidumbre referente a algún tipo de amenaza a su soberanía. Se pretende precisar si existen criterios concluyentes, o por el contrario determinar si no hay claridad con respecto al futuro de Gran Bretaña como miembro de la unión monetaria.A partir de lo anterior, se plantean como sus propósitos particulares construir un marco conceptual acerca de la soberanía. Este estado del arte se inicia con citas de los principales autores de finales de siglo XVII y XVIII y finaliza con las posiciones conceptuales aportadas por los teóricos modernos motivados por el nacimiento de la Unión Europea como un nuevo orden político. Entre las que se citan: modelo centrico o intergubernamentalista, modelo de gobernabilidad multi-nivel, modelo neo-funcionalista y modelo federalista. Igualmente, el trabajo, busca desarrollar un marco conceptual sobre Unión Monetaria y su evolución hasta el logro de una unión fiscal europea en el periodo de 1950-2010, establecer las relaciones teóricas entre Soberanía del Estado y Unión Monetaria y por último realizar un análisis histórico hermenéutico de la Unión Europea y el caso del Reino Unido de acuerdo a las relaciones evidenciadas en los apartados teóricos entre soberanía del Estado y Unión Monetaria.

Delirium. Los factores de riesgo propios de los pacientes en la Fundación Cardioinfantil - Instituto de Cardiología. Estudio de casos y controles

Introducción: el delirium es el trastorno neuropsiquiátrico más frecuente entre pacientes hospitalizados, se asocia con aumento en el tiempo de hospitalización, complicaciones nosocomiales e incluso se le atribuye aumento de la mortalidad de forma independiente. Existen estudios acerca de factores de riesgo para la condición, enfocados en las patologías, medicaciones y antecedentes de los pacientes; sin embargo son escasos los que buscan identificar los factores propios de los pacientes y del proceso de hospitalización, el cual es el objetivo del presente. Metodología: se realizó un estudio con diseño de casos y controles, incluyendo pacientes de la Fundación Cardioinfantil - Instituto de Cardiología con diagnóstico de delirium, hospitalizados entre marzo de 2011 y marzo de 2013. Con una muestra calculada de 201 pacientes, 67 casos y 134 controles (2:1), se equiparó los grupos para edad, piso de hospitalización, tipo de habitación hospitalaria y la fecha de hospitalización, obteniendo las variables de interés. Resultados: se encontró distintas variables relacionadas con delirium, algunas de estas clásicamente asociadas con la condición, posterior al análisis de los datos, las variables más fuertemente relacionadas con la condición fueron el tipo de ingreso, escala visual análoga del dolor, índice de Barthel y el tiempo de estancia en urgencias. Discusión: en nuestra revisión, el presente estudio es el primero de nuestro medio que busca identificar los factores de riesgo dados por la condición basal de los pacientes en su ingreso al hospital, estos factores fácilmente identificables son de utilidad para la prevención de la condición.