Rare earth doped synthetic opals and inverse opals

Monodisperse spheres of silica and latex were obtained by a surfactant free styrene polimerization and the Stober method respectively. Controlling settling either by centrifugation or by dip-coating colloidal crystals could be obtained. Silica inverse opals were prepared by using the latex colloidal crystals as templates and TEOS/ethanol solution. Eu3+ containing silica spheres were obtained dispersing silica spheres in Eu(NO3)(3) isopropanol solutions. Emission spectra suggest the formation of an amorphous Eu3+ containing phase well adhered at the spheres surface. The utilization of solutions of trifluoroacetates salts of Pb2+ and Eu3+ was observed to destroy the silica spherical pattern when samples are treated at 1000degreesC. In that case nanocrystals of PbF2 and amorphous silica were obtained after heat treatment.

Propagação de sapotizeiro (Manilkara zapota L.) por estaquia

Two sapoti tree accesses (Manilkara zapota), native plants of south of Mexico and of America Central, belonging to the Collection of Fruitful Native and Exotic of UNESP/FCAV, Jaboticabal Campus, was studied with relationship to the cutting propagation. The first test consisted of fast immersion of cutting base semi-herbaceous foliage of selected accesses FCAV-III and FCAV-VII. The ttreatments were alcoholic solution (50%) of indolbutiric acid (IBA) in concentrations of 0, 1,000, 3,000, 5,000 and 7,000 mgL(-1). and the cuttings preparing with and without latex exudate washing for a period of 14 hours in recipient with pure water. This trial was set in 5 x 2 x 2 factorial scheme (IBA concentrations x accesses x cutting preparation) The second test consisted the herbaceous foliage immersion of FCAV-III access in IBA concentrations above. Both experiments were distributed in randomized design with four replications and 10 cuttings each. All cuttings were collected in spring and prepared with about 12 cm of length, planted in medium texture vermiculite and carried under conditions intermittent mist spray flashing in chamber with 50% light. The two accesses tested not rooted and treatments were not able to induce the roots emission.

Local and remote lesions in horses subjected to small colon distension and decompression

The purpose of this study was to observe and characterize colonic and lung lesions in horses subjected to experimental distension and decompression of the small colon. Sixteen healthy adult horses were divided into 2 groups: 9 horses that were subjected to distension of the small colon by means of a latex balloon surgically implanted in the lumen and inflated to a pressure of 40 mm Hg for 4 h, and 7 horses in which the balloon was implanted but not inflated. Colonic biopsy specimens were collected before balloon implantation, at the end of the period of obstruction, and 1.5 and 12 h after decompression and were examined for hemorrhage, edema, and neutrophil infiltration; myeloperoxidase (MPO) activity and hemoglobin concentration were measured as well. At the end of the experiment, lung samples were also collected and examined for neutrophil accumulation and MPO activity. The mucosa was not affected by luminal distension; lesions were restricted to the seromuscular layer. Neutrophil accumulation and edema were observed in the samples from both groups of horses but were greater in those from the distension group, in which there was also hemorrhage, fibrin deposition, and increased MPO activity in the seromuscular layer. Similarly, there was greater accumulation of neutrophils in the lung samples from the distension group than in those from the sham-operated group, as determined by histologic evaluation and MPO assay. These findings provide new evidence of reperfusion injury and a systemic inflammatory response, followed by remote lesions, in horses with intestinal obstruction.

Population dynamics of Leptopharsa heveae (Hemiptera: Tingidae) and Erythmelus tingitiphagus (Hymenoptera: Mymaridae) in rubber tree plants

The tingid Leptopharsa heveae, known as the lace bug, occurs in large populations in rubber tree plantations, limiting the production of latex due to losses of photosynthetic area and weakening of the infested trees. The alternative for the use of insecticides would be the release of biological control agents, but little is known about the natural enemies of L. heveae. The parasitoid Erythmelus tingitiphagus parasitizes eggs of the lace bug in rubber tree plantations. The knowledge of the population dynamics and the peak of occurrence of economically important insect species and their natural enemies are indispensable requirements for the establishment of efficient and rational control strategies. The objective of this work was to study the population dynamics of L. heveae and E. tingitiphagus in rubber tree plantations in the county of Itiquira, MT, Brazil. Mature folioles were collected weekly from the lower stratum of the canopy of the tree clones RRIM 600, PR 255, GT 1, PB 235 and PB 217, from August/2005 to February/2006. The parasitoid was observed during the whole study period. The population peaks of the populations of the L. heveae and E. tingitiphagus in the study area occurred at the end of October and beginning of November. This result demonstrates that measures for the control of L. heveae and population increase of E. tingitiphagus must be adopted before the peak population of this pest in cultivated rubber plantations.

Nanocomposites of Styrene-Butadiene Rubber and Synthetic Anatase Obtained by a Colloidal Route and Their Photooxidation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Considerations sur la ramification de L'aorte abdominale du hamster (Mesocricetus Auratus)

The disposition of the abdominal aorta branching in Mesocricetus auratus is described, establishing variation groups with relation to the celiac, cranial mesenteric, renal, genital and caudal mesenteric arteries. Sixty animals (30 males and 30 females) of different ages and weights, were anesthetized with chloroform, injected with contrasting substance in the abdominal aorta (50 animals with Neoprene latex and 10 with a radioopaque mass), after which they were dissected with the help of a stereoscopic microscope. The animals with radioopaque masses were radiographed in comparison with the other animals. The results are expressed in relative percentage figures and compared with other mammalian arterial dispositions.

About the arterial blood vessels pelvic opossum's (Didelphis albiventris) behaviour

The work consists of the study of 20 opossums (Didelphis albiventris); 7 females and 13 males, adults, natives of Jaboticabal county proceeding to a canulation and injection of the arterial system with neoprene latex-650 in the aorta artery (full-blooded). Right away the preparations were fixed by a 10% formaldehyde aqueous solution and afterwards dissected and formed a scheme. The analysis of the pieces showed that in the opossum, the end of the aorta always divides in the common iliac artery, right and left sides, both originating the external and internal iliac artery, on the right and left sides. The medium sacral artery results, medianly, from the aorta division's angle in 2 common iliac arteries in 8 cases (40% - 6 males and 2 females); this vessel comes from the left common iliac artery in 7 animals (35% - 5 males and 2 females) or comes from the right common iliac artery, in 5 preparations (25% - 3 females and 2 males). The deep iliac circumflex artery is born by the common iliac artery from the right side in 10 preparations (50% - 6 males and 4 females), can appear as well, concomitantly with the external and internal iliac artery, from the right side in 9 pieces (45% - 6 males and 3 females) and further from the right this vessels can emerge from the external iliac artery, in 1 case only (5% - 1 male).

Contribuição para o estudo da proção cervical da veia facial de fetos, recém-nascidos e crianças.

In the study of cervical posterior of the facial vein of the foetus, newborns and children we injected in the veins of the head and neck of 15 corpses, rubber material (Xantopren and or Neoprene Latex). The results showed than the retromandibular and or the facial vein form a venous trunk in 83.3%, what finish always in the intern jugular vein or join the retromandibular vein and casually also with a posterior auricular vein originating the extern jugular vein (16.7%).

Identificação e quantificação de resinas, cargas e pigmentos em tintas látex branca

Resins, pigments and fillers constituents in white latex paint were identified and quantified after previous treatment under both low temperature and low pressure in order to get toilet powder from emulsion samples. TG/DTA allowed, under determined conditions, to distinguish the kind of resins, fillers and pigments in commercial paints. X-ray diffractometry was used to confirm the presence of pigment in the final residue from the thermal decomposition.

Ant exclusion and reproduction of Croton sarcopetalus (Euphorbiaceae)

A total of 20 insect species were observed on the extrafloral nectaries (EFNs) of Croton sarcopetalus. The most frequent ant species were Zacryptocerus sp., Crematogaster brevispinosa, C. scelerata, and Linepithema humile. Ants continuously patrolled the plants taking extrafloral nectar. Experimental data showed that there were no significant differences in either the degree of herbivory or in the reproductive output between control stems (with ants) and treated ones (without ants). We found no significant evidence of protection by ants mediated by EFNs in C. sarcopetalus. It is possible that the plant has other mechanisms than ant protection to prevent herbivore damage (e.g., hairs, latex, chemical defense). As this species occupies the southernmost distribution for the genus, the presence of EFNs in this species may be the remnant of a mutualistic interaction with the ants in tropical regions, where the abundance and diversity of ants and herbivores are comparatively higher. To draw accurate patterns in the genus Croton, further investigations in other species from tropical regions of South America are needed.

Age-age correlation for early selection of rubber tree genotypes in São Paulo State, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estimation of variance components and prediction of breeding values in rubber tree breeding using the REML/BLUP procedure

The present paper deals with estimation of variance components, prediction of breeding values and selection in a population of rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Müell.-Arg.] from Rio Branco, State of Acre, Brazil. The REML/BLUP (restricted maximum likelihood/best linear unbiased prediction) procedure was applied. For this purpose, 37 rubber tree families were obtained and assessed in a randomized complete block design, with three unbalanced replications. The field trial was carried out at the Experimental Station of UNESP, located in Selvíria, State of Mato Grosso do Sul, Brazil. The quantitative traits evaluated were: girth (G), bark thickness (BT), number of latex vessel rings (NR), and plant height (PH). Given the unbalanced condition of the progeny test, the REML/BLUP procedure was used for estimation. The narrow-sense individual heritability estimates were 0.43 for G, 0.18 for BT, 0.01 for NR, and 0.51 for PH. Two selection strategies were adopted: one short-term (ST - selection intensity of 8.85%) and the other long-term (LT - selection intensity of 26.56%). For G, the estimated genetic gains in relation to the population average were 26.80% and 17.94%, respectively, according to the ST and LT strategies. The effective population sizes were 22.35 and 46.03, respectively. The LT and ST strategies maintained 45.80% and 28.24%, respectively, of the original genetic diversity represented in the progeny test. So, it can be inferred that this population has potential for both breeding and ex situ genetic conservation as a supplier of genetic material for advanced rubber tree breeding programs. Copyright by the Brazilian Society of Genetics.

Detection of enterotoxin and toxic shock syndrome toxin 1 genes in Staphylococcus, with emphasis on coagulase-negative staphylococci

The detection of staphylococcal enterotoxins is decisive for the confirmation of an outbreak and for the determination of the enterotoxigenicity of strains. Since the recognition of their antigenicity, a large number of serological methods for the detection of enterotoxins in food and culture media have been proposed. Since immunological methods require detectable amounts of toxin, molecular biology techniques represent important tools in the microbiology laboratory. In the present study, polymerase chain reaction (PCR) was used to identify genes responsible for the production of enterotoxins and toxic shock syndrome toxin 1 (TSST-1) in S. aureus and coagulase-negative staphylococci (CNS) isolated from patients and the results were compared with those obtained by the reverse passive latex agglutination (RPLA) assay. PCR detection of toxin genes revealed a higher percentage of toxigenic S. aureus strains (46.7%) than the RPLA method (38.3%). Analysis of the toxigenic profile of CNS strains showed that 26.7% of the isolates produced some type of toxin, and one or more toxin-specific genes were detected in 40% of the isolates. These results suggests the need for further studies in order to better characterize the pathogenic potential of CNS and indicate that attention should be paid to the toxigenic capacity of this group of microorganisms.

Comparative analysis between experimental characterization results and numerical fdtd modeling of self-assembled photonic crystals

This paper presents a comparative analysis between the experimental characterization and the numerical simulation results for a three-dimensional FCC photonic crystal (PhC) based on a self-assembly synthesis of monodispersive latex spheres. Specifically, experimental optical characterization, by means of reflectance measurements under variable angles over the lattice plane family [1,1, 1], are compared to theoretical calculations based on the Finite Di®erence Time Domain (FDTD) method, in order to investigate the correlation between theoretical predictions and experimental data. The goal is to highlight the influence of crystal defects on the achieved performance.

Evaluation of a two-step pouring technique for implant-supported prostheses impression

The aim of this study was to evaluate the efficacy of a pouring technique for implant-supported prostheses impressions. A metallic matrix (control group) with two implants positioned at 90 and 65 degrees was fabricated. The matrix was submitted to the direct transfer impression technique. In group CP (conventional pouring - n = 10), casts were obtained by the conventional pouring technique. In group EP (experimental pouring - n = 10), the analogs were embraced with latex tubes before the first pouring and then submitted to a second pouring. Vertical misfit and implants/analogs inclinations were evaluated. Data were analyzed by analysis of variance and Tukey's test (p < .05). Results demonstrated significant difference (p < .05) between control and experimental groups for misfit measurement in perpendicular implant/analog and between control group and group EP in leaning implant/analog. Considering inclination, there were significant differences (p < .05) between control and experimental groups for leaning analogs. Independently of the pouring technique, perpendicular implants produced more accurate casts.