Signaling pathways controlling induced resistance to insect herbivores in Arabidopsis.

Insect attack triggers changes in transcript level in plants that are mediated predominantly by jasmonic acid (JA). The implication of ethylene (ET), salicylic acid (SA), and other signals in this response is less understood and was monitored with a microarray containing insect- and defense-regulated genes. Arabidopsis thaliana mutants coi1-1, ein2-1, and sid2-1 impaired in JA, ET, and SA signaling pathways were challenged with the specialist small cabbage white (Pieris rapae) and the generalist Egyptian cotton worm (Spodoptera littoralis). JA was shown to be a major signal controlling the upregulation of defense genes in response to either insect but was found to suppress changes in transcript level only in response to P. rapae. Larval growth was affected by the JA-dependent defenses, but S. littoralis gained much more weight on coi1-1 than P. rapae. ET and SA mutants had an altered transcript profile after S. littoralis herbivory but not after P. rapae herbivory. In contrast, both insects yielded similar transcript signatures in the abscisic acid (ABA)-biosynthetic mutants aba2-1 and aba3-1, and ABA controlled transcript levels both negatively and positively in insect-attacked plants. In accordance with the transcript signature, S. littoralis larvae performed better on aba2-1 mutants. This study reveals a new role for ABA in defense against insects in Arabidopsis and identifies some components important for plant resistance to herbivory.

Differentiating schizoaffective and bipolar I disorder in first-episode psychotic mania.

OBJECTIVE: This study aims to differentiate schizoaffective disorder (SAD) and bipolar-I-disorder (BD) in first-episode psychotic mania (FEPM). METHODS: All 134 patients from an epidemiological first-episode psychosis cohort (N=786) with FEPM and an 18-month follow-up final diagnosis of SAD (n=36) or BD (n=98) were assessed with respect to pre-treatment, baseline and outcome differences. Second, patients with baseline BD who shifted (shifted BD) or did not shift to SAD (stable BD) over the follow-up period were compared regarding pre-treatment and baseline differences. RESULTS: SAD patients displayed a significantly longer duration of untreated psychosis (DUP; effect size r=0.35), a higher illness-severity at baseline (r=0.20) and more traumatic events (Cramer-V=0.19). SAD patients displayed a significantly higher non-adherence rate (Cramer-V=0.19); controlling for time in treatment and respective baseline scores, SAD patients had significantly worse illness severity (CGI-S; partial η(2)=0.12) and psychosocial functioning (GAF; partial η(2)=0.07) at 18-months, while BD patients were more likely to achieve remission of positive symptoms (OR=4.9, 95% CI=1.8-13.3; p=0.002) and to be employed/occupied (OR=7.7, 95% CI=2.4-24.4, p=0.001). The main discriminator of stable and shifted BD was a longer DUP in patients shifting from BD to SAD. CONCLUSIONS: It is difficult to distinguish BD with psychotic symptoms and SAD in patients presenting with FEPM. Longer DUP is related to SAD and to a shift from BD to SAD. Compared to BD, SAD had worse outcomes and higher rates of non-adherence with medication. Despite these differences, both diagnostic groups need careful dimensional assessment and monitoring of symptoms and functioning in order to choose the right treatment.

In situ and genetic characterization of Gossypium barbadense populations from the states of Pará and Amapá, Brazil

The objective of this work was to characterize the populations of Gossypium barbadense in the states of Amapá and Pará, Brazil. In situ characterization was conducted through interviews with the owners of the plants and environmental observations. Leaf or petal tissue as well as seed samples were collected for genetic characterization by single sequence repeats markers and for storage in germplasm banks, respectively. The plants were maintained in dooryards and used mainly for medical purposes. The genetic analysis showed no heterozygous plants at the loci tested (f = 1), indicating that reproduction occurs mainly through selfing. The total genetic diversity was high (He = 0.39); and a high level of differentiation was observed between cotton plants from the two states (F ST = 0.36). Conventional methods of in situ maintenance of G. barbadense populations are not applicable. The conservation of the genetic variability of populations present in the two states could be achieved through germplasm collection and establishing of ex situ seed banks.

Origin of needle fibre calcite (NFC) : a geochemical approach

ABSTRACTNeedle fibre calcite (NFC) is one of the most widespread habits of pedogenic calcite. It is a monocrystal of calcite, in the shape of a needle, with a diameter of one micron and a length between 4 and 103 times its width. NFC occurs in soils with different macroscopic and microscopic morphologies. Macroscopically, two main habits of NFC exist: "cotton ball'Mike clusters and as "powder" coating on pebbles inside the soil. It can also act as nucleation sites for precipitation of calcite cements of purely physicochemical origin (LCC - Late Calcitic Cement). Although many studies have been conducted on needle fibre calcite, its origin remains a subject of debate. The NFC having never been reproduced in the laboratory whatever the considered approach, the processes responsible for its precipitation as a so particular morphology remain unexplained. The shift between the length orientation of the needle crystal and the normal axis of calcite growth (c-axis) is also unresolved.Samples taken in two soils observed in quarries (Villiers and Savagnier) in the Swiss Jura Mountains are used to investigate the processes involved in the formation of these calcite crystals in pedogenic environments. Three groups of microscopic morphologies are distinguished: (i) simple needles (SN), (ii) simple needles with overgrowths (SNO), and (iii) simple needles with nanofibres (SNN), nanofibres being either organic or mineral in nature. These groups correspond to different stages in the formation and evolution of NFC.Comparison of carbon and oxygen isotope compositions of NFC with LCC, in relationship with the composition of the carbonate host rock (CHR), and the carbon isotope signature of dissolved inorganic carbon (DIC) from the soil waters, indicates that both NFC and LCC are precipitated in isotopic equilibrium with the soil solution. Similar Ô13C and Ô180 values of the elongated NFC and the rhombohedral calcite crystals of the LCC suggest that the precipitation of these different calcite habits is not due to changes in physicochemical conditions. The growth of NFC crystals inside an organic mould formed by the fungal hyphae could explain the formation of calcite ciystals in the shape of a needle in isotopic equilibrium with the local environment.Strontium and calcium isotope compositions of the three microscopic groups of NFC and LCC were also studied, in order to determine the origin of calcium (Ca2+) entrapped in the calcite lattice and to elucidate the processes responsible for the precipitation of NFC. The 87Sr/86Sr ratio of the SN is closer to the 87Sr/86Sr ratio of the carbonate host rock than the LCC, SNO, and SNN. This could be another clue for the formation of SN inside fungal hyphae, because fungi are known to dissolve the rocks to release and translocate through their hyphae nutrients necessary for their growth. SN and SNN are depleted in Sr and enriched in ^Ca compared to the LCC. In the context of Villiers quarry, where the two ciystal shapes precipitate at similar temperature (in a range of 0,6°C), such variations are the result of a slower precipitation rate of NFC, which is inconsistent with a purely physicochemically precipitated elongate crystal.Finally, NFC is enriched in major and trace elements (i.e. Fe, Zn, Cu, and Mo) compared to the LCC. This enrichment is ascribed to modification in precipitation processes between the NFC and LCC. Right now, it is not possible to preclude the influence of the particular shape of NFC or the biological influence. REEs are not fractionated in NFC, contrary to LCC. Thus, NFC does not precipitate from a percolation solution circulating downward the soil, which should lead to the fractionation of the REEs. As explained above, fungi, are able to dissolve and translocate nutrients. This kind of processes allows releasing elements in the soil solution without fractionation and could explain the particular chemical signature of NFC regarding the REEs.The geochemical approach to investigate the origin of NFC presented in this study does not allow providing direct clues to the fungal origin of NFC, but brings several new insights in the understanding of the formation of such a particular mineral, calcite needles, by precluding definitively their physicochemical origin.RESUMELa calcite en aiguilles (NFC) est l'une des formes les plus ubiquiste de calcite pédogénique. Il s'agit d'un monocrystal de calcite d'un diamètre d'un micron et d'une longueur 4 à 102 fois supérieure à sa largeur. A l'échelle macroscopique, la NFC a été observée sous deux principaux aspects : l'une « cotonneuse » et l'autre formant un mince croûte autour des graviers du sol. La NFC peut également servir de support à la nucléation de ciments secondaires précipités de manière purement physico-chimique (LCC). Malgré les nombreuses études menées sur la NFC, son origine demeure encore inconnue. A ce jour, aucune expérience en laboratoire n'a permis de créer de la calcite en aiguilles, et ce, quelque soit l'approche abordée. Par conséquent, les processus précis responsables de la précipitation calcite avec une telle morphologie restent inconnus. Le décalage existant entre l'axe d'allongement des aiguilles de calcite et l'axe normal de croissance de la calcite (axe c) reste inexpliqué.Des échantillons de NFC, LCC, roche mère, eau de pluie des différents horizons du sol ont été prélevés principalement au front de deux carrières de graviers, ainsi que dans un profil de sol adjacent à ces carrières, dans le but de mieux comprendre les processus à l'origine de la précipitation de calcite en forme d'aiguille. Trois micro-morphologies ont été distinguées: les aiguilles simples (SN), les aiguilles simples avec surcroissances calcitiques (SNO) et enfin les aiguilles simples avec nanofibres (SNN), celles-ci pouvant être de minérales ou organiques. Ces groupes, d'après nos résultats et les études antérieures pourraient correspondre à différentes étapes de formation de la calcite en aiguilles.Dans un premier temps, la comparaison des signatures isotopiques de la calcite en aiguilles, du LCC, de la roche mère et du carbone inorganique dissout dans la solution du sol (CID) indique que la NFC, tout comme le LCC, précipite en équilibre avec la solution du sol. Les valeurs similaires en Ô13C et δ180 de cristaux de calcite allongés (NFC) et rhombohédriques (LCC) formés dans un même milieu suggère que ces différences morphologiques ne peuvent pas être attribuées à des modifications purement physico-chimiques. La croissance de NFC à l'intérieur d'un moule organique comme les hyphes de champignons semble être la seule hypothèse plausible permettant d'expliquer la formation de monocrystaux allongés de calcite en équilibre avec leur environnement.La composition isotopique en strontium (Sr) et calcium (Ca) des LCC et des trois micro¬morphologies de la NFC ont été étudiées également, afin de déterminer l'origine du Ca2+ présent dans le réseau cristallin de la calcite en aiguilles, ainsi que les processus responsables de la formation de NFC. Les valeurs du rapport 87Sr/86$r de la forme SN sont les plus proches de celles de la roche mère par rapport aux formes SNN et SNO et du LCC. Ceci pourrait être un nouvel indice de l'implication des champignons dans la précipitation de calcite en aiguilles, puisqu'ils sont connus pour avoir la capacité de dissoudre les roches afin de libérer les nutriments nécessaires à leur croissance, ainsi que de les transloquer par leurs hyphes. De plus, les formes SN et SNN sont appauvries en Sr et enrichies en "Ca, comparativement au LCC. Dans le sol étudié, tous les carbonates de calcium précipitent à la même température, par conséquent, de telles variations sont dues à un taux de précipitation plus lent de SN et SNN, ce qui est contradictoire avec l'hypothèse physico-chimique. Pour finir, la NFC est enrichie en certains éléments majeurs et traces (i.e. Fe, Zn, Cu et Mo) par rapport au LCC. Ceci peut être attribué à différents processus de formation entre la NFC et le LCC. Pour le moment il est impossible d'exclure l'influence de la forme particulière de la NFC ou celle du champignon. Les terres rares (REEs) ne sont pas fractionnées dans la NFC, contrairement au LCC. Ceci peut être expliqué par le fait que la NFC précipite à partir d'une solution qui n'a pas percolé à travers le sol. Les champignons en dissolvant les roches mettent en solution éléments sans les fractionner. L'approche géochimique de l'étude de la calcite en aiguilles ne permets pas de produire des preuves directes sur sa potentielle origine fongique, mais permet de mieux comprendre comment un minéral aussi singulier que la NFC peut se former. D'autre pare cette étude permets d'exclure définitivement l'hypothèse physico-chimique de l'origine de la calcite en aiguilles

Wages and prices in early Catalan industrialisation

[eng] Catalonia was the only Mediterranean region among the early followers of the British Industrial Revolution in the second third of the nineteenth century. The roots of this industrialisation process can be traced back to the seventeenth and eighteenth centuries when the Catalan economy became successfully integrated in international trade and the region enjoyed an intensification of its agrarian and proto-industrial activities. These capitalist developments were subsequently reinforced by a successful printed calico manufacturing business concentrated in the city of Barcelona. Although the factory system was largely adopted by the cotton industry in the 1840s, the diffusion of the spinning jenny had occurred earlier in the 1790s. In this paper, in line with Allen (2009a, 2009b), we explore whether relative factor prices played a role in the widespread adoption of the spinning jenny in Catalonia.

Wages and prices in early Catalan industrialisation

[eng] Catalonia was the only Mediterranean region among the early followers of the British Industrial Revolution in the second third of the nineteenth century. The roots of this industrialisation process can be traced back to the seventeenth and eighteenth centuries when the Catalan economy became successfully integrated in international trade and the region enjoyed an intensification of its agrarian and proto-industrial activities. These capitalist developments were subsequently reinforced by a successful printed calico manufacturing business concentrated in the city of Barcelona. Although the factory system was largely adopted by the cotton industry in the 1840s, the diffusion of the spinning jenny had occurred earlier in the 1790s. In this paper, in line with Allen (2009a, 2009b), we explore whether relative factor prices played a role in the widespread adoption of the spinning jenny in Catalonia.

Wages and prices in early Catalan industrialisation

[eng] Catalonia was the only Mediterranean region among the early followers of the British Industrial Revolution in the second third of the nineteenth century. The roots of this industrialisation process can be traced back to the seventeenth and eighteenth centuries when the Catalan economy became successfully integrated in international trade and the region enjoyed an intensification of its agrarian and proto-industrial activities. These capitalist developments were subsequently reinforced by a successful printed calico manufacturing business concentrated in the city of Barcelona. Although the factory system was largely adopted by the cotton industry in the 1840s, the diffusion of the spinning jenny had occurred earlier in the 1790s. In this paper, in line with Allen (2009a, 2009b), we explore whether relative factor prices played a role in the widespread adoption of the spinning jenny in Catalonia.

Sharing data between LSDBs and central repositories.

Several Locus-Specific DataBases (LSDBs) have recently been approached by larger, more general data repositories (including NCBI and UCSC) with the request to share the DNA variant data they have collected. Within the Human Genome Variation Society (HGVS) a document was generated summarizing the issues related to these requests. The document has been circulated in the HGVS/LSDB community and was discussed extensively. Here we summarize these discussions and present the concluded recommendations for LSDB data sharing with central repositories.

Wages and prices in early Catalan industrialisation

Catalonia was the only Mediterranean region among the early followers of the British Industrial Revolution in the second third of the nineteenth century. The roots of this industrialisation process can be traced back to the seventeenth and eighteenth centuries when the Catalan economy became successfully integrated in international trade and the region enjoyed an intensification of its agrarian and proto-industrial activities. These capitalist developments were subsequently reinforced by a successful printed calico manufacturing business concentrated in the city of Barcelona. Although the factory system was largely adopted by the cotton industry in the 1840s, the diffusion of the spinning jenny had occurred earlier in the 1790s. In this paper, in line with Allen (2009a, 2009b), we explore whether relative factor prices played a role in the widespread adoption of the spinning jenny in Catalonia.

Wages and prices in early Catalan industrialisation

Catalonia was the only Mediterranean region among the early followers of the British Industrial Revolution in the second third of the nineteenth century. The roots of this industrialisation process can be traced back to the seventeenth and eighteenth centuries when the Catalan economy became successfully integrated in international trade and the region enjoyed an intensification of its agrarian and proto-industrial activities. These capitalist developments were subsequently reinforced by a successful printed calico manufacturing business concentrated in the city of Barcelona. Although the factory system was largely adopted by the cotton industry in the 1840s, the diffusion of the spinning jenny had occurred earlier in the 1790s. In this paper, in line with Allen (2009a, 2009b), we explore whether relative factor prices played a role in the widespread adoption of the spinning jenny in Catalonia.

Male mutation bias and possible long-term effects of human activities.

The ability of a population to adapt to changing environments depends critically on the amount and kind of genetic variability it possesses. Mutations are an important source of new genetic variability and may lead to new adaptations, especially if the population size is large. Mutation rates are extremely variable between and within species, and males usually have higher mutation rates as a result of elevated rates of male germ cell division. This male bias affects the overall mutation rate. We examined the factors that influence male mutation bias, and focused on the effects of classical life-history parameters, such as the average age at reproduction and elevated rates of sperm production in response to sexual selection and sperm competition. We argue that human-induced changes in age at reproduction or in sexual selection will affect male mutation biases and hence overall mutation rates. Depending on the effective population size, these changes are likely to influence the long-term persistence of a population.

A study of the effects of PVAC on works of art on paper and wood: pH and colour change

This paper presents the preliminary findings of pH and colour measurements carried out on artworks on paperand on wood that had been treated with a poly(vinyl acetate) (PVAC) based adhesive in the 1980s. In both cases, areas treated with PVAC proved to be less acidic than untreated areas. Contrary to expectations, the conservation treatments have not, as yet, increased acidity levels in the objects under study. Colour measurements of the works on paper showed that those that had been backed with a cotton fabric using a mixture of methylcellulose and PVAC were less yellow than those from the same print run that had not been backed. This finding suggests that the backing somehow prevented the natural degradation of the support. In view of these preliminary results, further research is clearly needed. This study forms part of a broader ongoing project to assess the role of PVAC in the conservation of a range of cultural assets.

A study of the effects of PVAC on works of art on paper and wood: pH and colour change

This paper presents the preliminary findings of pH and colour measurements carried out on artworks on paperand on wood that had been treated with a poly(vinyl acetate) (PVAC) based adhesive in the 1980s. In both cases, areas treated with PVAC proved to be less acidic than untreated areas. Contrary to expectations, the conservation treatments have not, as yet, increased acidity levels in the objects under study. Colour measurements of the works on paper showed that those that had been backed with a cotton fabric using a mixture of methylcellulose and PVAC were less yellow than those from the same print run that had not been backed. This finding suggests that the backing somehow prevented the natural degradation of the support. In view of these preliminary results, further research is clearly needed. This study forms part of a broader ongoing project to assess the role of PVAC in the conservation of a range of cultural assets.

Stage managing bipolar disorder.

OBJECTIVES: Clinical staging is widespread in medicine - it informs prognosis, clinical course, and treatment, and assists individualized care. Staging places an individual on a probabilistic continuum of increasing potential disease severity, ranging from clinically at-risk or latency stage through first threshold episode of illness or recurrence, and, finally, to late or end-stage disease. The aim of the present paper was to examine and update the evidence regarding staging in bipolar disorder, and how this might inform targeted and individualized intervention approaches. METHODS: We provide a narrative review of the relevant information. RESULTS: In bipolar disorder, the validity of staging is informed by a range of findings that accompany illness progression, including neuroimaging data suggesting incremental volume loss, cognitive changes, and a declining likelihood of response to pharmacological and psychosocial treatments. Staging informs the adoption of a number of approaches, including the active promotion of both indicated prevention for at-risk individuals and early intervention strategies for newly diagnosed individuals, and the tailored implementation of treatments according to the stage of illness. CONCLUSIONS: The nature of bipolar disorder implies the presence of an active process of neuroprogression that is considered to be at least partly mediated by inflammation, oxidative stress, apoptosis, and changes in neurogenesis. It further supports the concept of neuroprotection, in that a diversity of agents have putative effects against these molecular targets. Clinically, staging suggests that the at-risk state or first episode is a period that requires particularly active and broad-based treatment, consistent with the hope that the temporal trajectory of the illness can be altered. Prompt treatment may be potentially neuroprotective and attenuate the neurostructural and neurocognitive changes that emerge with chronicity. Staging highlights the need for interventions at a service delivery level and implementing treatments at the earliest stage of illness possible.

A spatially explicit life cycle inventory of the global textile chain

Life cycle analyses (LCA) approaches require adaptation to reflect the increasing delocalization of production to emerging countries. This work addresses this challenge by establishing a country-level, spatially explicit life cycle inventory (LCI). This study comprises three separate dimensions. The first dimension is spatial: processes and emissions are allocated to the country in which they take place and modeled to take into account local factors. Emerging economies China and India are the location of production, the consumption occurs in Germany, an Organisation for Economic Cooperation and Development country. The second dimension is the product level: we consider two distinct textile garments, a cotton T-shirt and a polyester jacket, in order to highlight potential differences in the production and use phases. The third dimension is the inventory composition: we track CO2, SO2, NO (x), and particulates, four major atmospheric pollutants, as well as energy use. This third dimension enriches the analysis of the spatial differentiation (first dimension) and distinct products (second dimension). We describe the textile production and use processes and define a functional unit for a garment. We then model important processes using a hierarchy of preferential data sources. We place special emphasis on the modeling of the principal local energy processes: electricity and transport in emerging countries. The spatially explicit inventory is disaggregated by country of location of the emissions and analyzed according to the dimensions of the study: location, product, and pollutant. The inventory shows striking differences between the two products considered as well as between the different pollutants considered. For the T-shirt, over 70% of the energy use and CO2 emissions occur in the consuming country, whereas for the jacket, more than 70% occur in the producing country. This reversal of proportions is due to differences in the use phase of the garments. For SO2, in contrast, over two thirds of the emissions occur in the country of production for both T-shirt and jacket. The difference in emission patterns between CO2 and SO2 is due to local electricity processes, justifying our emphasis on local energy infrastructure. The complexity of considering differences in location, product, and pollutant is rewarded by a much richer understanding of a global production-consumption chain. The inclusion of two different products in the LCI highlights the importance of the definition of a product's functional unit in the analysis and implications of results. Several use-phase scenarios demonstrate the importance of consumer behavior over equipment efficiency. The spatial emission patterns of the different pollutants allow us to understand the role of various energy infrastructure elements. The emission patterns furthermore inform the debate on the Environmental Kuznets Curve, which applies only to pollutants which can be easily filtered and does not take into account the effects of production displacement. We also discuss the appropriateness and limitations of applying the LCA methodology in a global context, especially in developing countries. Our spatial LCI method yields important insights in the quantity and pattern of emissions due to different product life cycle stages, dependent on the local technology, emphasizing the importance of consumer behavior. From a life cycle perspective, consumer education promoting air-drying and cool washing is more important than efficient appliances. Spatial LCI with country-specific data is a promising method, necessary for the challenges of globalized production-consumption chains. We recommend inventory reporting of final energy forms, such as electricity, and modular LCA databases, which would allow the easy modification of underlying energy infrastructure.